| AEPD® VOX 1000 | ANGUS Chemical Company 安格斯化学公司 | 一个新的多官能团添加剂，用于低气味，零VOC户内水性油漆。它具有非常温和的气味，高沸点和低蒸汽压。这些特点使之成为需要符合EU directive 2004/42/EC法规的油漆生产商一个理想的配方工具 | |
| ALKATERGE®-T | ANGUS Chemical Company 安格斯化学公司 | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展开 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起 | |
| AMP® | ANGUS Chemical Company 安格斯化学公司 | 这是一种无色，低粘度流体，大量用于金属加工流体，涂料，锅炉水体系和个人护理等领域。它可用作中和树脂的胺，协同分散剂，脱甲醛剂，腐蚀抑制剂以及作为合成的原料。 | |
| AMP-95® | ANGUS Chemical Company 安格斯化学公司 | 被普遍认为是一种用于所有类型的乳胶漆的多功能添加剂。 | |
| AVANTANE® PA 4000 | ANGUS Chemical Company 安格斯化学公司 | 一种专门设计用于满足溶剂型轮转凹印和柔印印刷性能要求的添加剂。 | |
| Cinergi™ 2091 A | Lawter | Cinergi™ 2091 A is a grinding and flushing vehicle that has been created to wet-out high pigment loads and to achieve maximum color development. It has good pigment wetting properties and shows press stability, high gloss, good transfer and leveling as we...展开 Cinergi™ 2091 A is a grinding and flushing vehicle that has been created to wet-out high pigment loads and to achieve maximum color development. It has good pigment wetting properties and shows press stability, high gloss, good transfer and leveling as well as fast set speeds. Cinergi™ 2091 A is used in sheet-fed and letterpress inks. 收起 | |
| DMAMP-80® | ANGUS Chemical Company 安格斯化学公司 | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...展开 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. 收起 | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company 安格斯化学公司 | 一种经过改进的万能专业涂料助剂，是一种有效的溶液，能够满足涂料配方的要求，减少特殊助剂的用量。 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Miraglaze™ 8614 A | Lawter | Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with...展开 Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with minimal yellow and good rub characteristics. It also has ink driers and wax to enhance the formation of necessary print properties, making it suitable for use in overprints and wet or dry trapped applications. 收起 | |
| Optilith™ 1486 A | Lawter | Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optil...展开 Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optilith™ 1486 A is recommended for use in heatset offset and sheet-fed offset inks. 收起 | |
| Optilith™ 4 A | Lawter | Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for ...展开 Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for use in heatset and sheet-fed offset inks and in flushing vehicles. 收起 | |
| Polysperse™ | Lawter | Polysperse™ is a micronized wax powder that provides good slip as well as good rub resistance and comes recommended for use in sheet-fed, heatset and liquid inks. | |
| Polysperse™ 735 | Lawter | Polysperse™ 735 is a micronized wax powder that displays good rub resistance and is recommended for use in sheet-fed, heatset and liquid inks. | |
| Polysperse™ A | Lawter | Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resista...展开 Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resistance and gloss. Polysperse™ A is suitable for use in flexographic and gravure inks, heatset and sheet-fed inks and in UV and metal decorating inks. 收起 | |
| Polysperse™ HPC | Lawter | Polysperse™ HPC is a micronized wax powder that displays good rub resistance, has good slip properties and a high melting point. It is recommended for use in sheet-fed, heatset and liquid inks. | |
| Polysperse™ W2F | Lawter | Polysperse™ W2F is a micronized wax with 98% solids and provides good slip and rub resistance and finds uses in flexo, gravure and digital printing inks. | |
| Stirinol™ 97 A | Lawter | Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset in...展开 Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset inks and hot foil stamping applications. 收起 | |
| Uroset™ 100SC | Lawter | Uroset™ 100SC is a dispersion varnish with a low viscosity that was created as a universal base for any letterpress oil ink formulations or offsets. Uroset™ 100SC carries high pigment concentrations, providing good gloss as well as good pigment wetting an...展开 Uroset™ 100SC is a dispersion varnish with a low viscosity that was created as a universal base for any letterpress oil ink formulations or offsets. Uroset™ 100SC carries high pigment concentrations, providing good gloss as well as good pigment wetting and litho properties. Apart from offsets and letterpress inks, it is also suitable for use in metal deco inks. 收起 | |
| Uroset™ 2055C | Lawter | Uroset™ 2055C is a wetting varnish for offset printing that is formulated from alkali blue and is considered to have good flow properties. It has a soya bean oil base with 75% non-volatile composition. Uroset™ 2055C is recommended for use in sheet-fed ink...展开 Uroset™ 2055C is a wetting varnish for offset printing that is formulated from alkali blue and is considered to have good flow properties. It has a soya bean oil base with 75% non-volatile composition. Uroset™ 2055C is recommended for use in sheet-fed inks. 收起 | |
| Uroset™ 8802 C | Lawter | Uroset™ 8802 C is a pigment dispersion varnish that is 80% non-volatile and is based on vegetable oils, mineral distillates and modified rosin-based resins. It is used in pigment concentrates and combines fast setting benefits with high gloss, while maint...展开 Uroset™ 8802 C is a pigment dispersion varnish that is 80% non-volatile and is based on vegetable oils, mineral distillates and modified rosin-based resins. It is used in pigment concentrates and combines fast setting benefits with high gloss, while maintaining good water balance and good rheological and press stability. Uroset™ 8802 C is suited for use as a single varnish for all sheet-fed inks and gloss offsets. 收起 | |
| Uroset™ 8825 C | Lawter | Uroset™ 8825 C is a 100% non-volatile pigment dispersion varnish from vegetable oils, ester solvents and phenolic-modified rosin-based resins. It displays good pigment wetting properties and combines fast setting benefits with high gloss. Uroset™ 8825 C c...展开 Uroset™ 8825 C is a 100% non-volatile pigment dispersion varnish from vegetable oils, ester solvents and phenolic-modified rosin-based resins. It displays good pigment wetting properties and combines fast setting benefits with high gloss. Uroset™ 8825 C can be used as a single varnish for all sheet-fed inks and gloss offsets. 收起 | |
| Uroset™ 8850C | Lawter | Uroset™ 8850C is a wetting varnish with a soya bean oil base that provides good pigment wetting properties and also offers a combination of fast setting and high gloss features. Uroset™ 8850C shows good rheological behavior and water balance as well as p...展开 Uroset™ 8850C is a wetting varnish with a soya bean oil base that provides good pigment wetting properties and also offers a combination of fast setting and high gloss features. Uroset™ 8850C shows good rheological behavior and water balance as well as press stability. It is suitable for use in pigment dispersions and concentrates, in offset inks and in gloss offset, quickset and sheet-fed applications. 收起 | |
| Uroset™ FGVC | Lawter | Uroset™ FGVC is a quickset dispersion varnish with good pigment wetting properties that can create ground or flushed color bases with stable and easily-handled bodies. It has high pigment loading ability, is fast setting and has good litho properties. Uro...展开 Uroset™ FGVC is a quickset dispersion varnish with good pigment wetting properties that can create ground or flushed color bases with stable and easily-handled bodies. It has high pigment loading ability, is fast setting and has good litho properties. Uroset™ FGVC is durable and has applications in offset inks, flush and pigment concentrates. 收起 | |
| Webvar™ 1126 | Lawter | Webvar™ 1126 is a heatset gel varnish displaying good transfer and lithographic performance, along with high gloss at all press speeds. It also has low misting and good water balance properties and is considered ideal for use in heatset inks. | |
| Webvar™ 1127 | Lawter | Webvar™ 1127 is a heatset free-flow varnish which displays good flow, water balance and high gloss features, along with low misting and fast setting properties. It is considered a varnish that is ideal for adjusting the rheology in the ink to create bette...展开 Webvar™ 1127 is a heatset free-flow varnish which displays good flow, water balance and high gloss features, along with low misting and fast setting properties. It is considered a varnish that is ideal for adjusting the rheology in the ink to create better gloss and transfer. Webvar™ 1127 is used in heatset inks and wetting varnishes. 收起 | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company 安格斯化学公司 | 快速反应、低黏度呃唑烷基湿气净化剂，用于聚氨酯涂料、密封剂和弹性体。 |
