UL Prospector

成功!

成功保存搜索结果
1257 Superfast Yellow 10G Shanghai Honor Industrial Co., LTD 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起
1260 SuperFast Yellow RNG Shanghai Honor Industrial Co., LTD 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。
Arbocel® 230 Interfibe Corporation Arbocel® 230 is a grey reclaimed cellulose fiber that is insoluble in water. This product improves a variety of adhesive formulations, which includes: acrlyic, butyl, epoxy, latex, or any type of solvent. Arbocel® 230 provides improved oil retention, ten...展开 Arbocel® 230 is a grey reclaimed cellulose fiber that is insoluble in water. This product improves a variety of adhesive formulations, which includes: acrlyic, butyl, epoxy, latex, or any type of solvent. Arbocel® 230 provides improved oil retention, tensile strength, and overall formulation performance. 收起
Arbocel® 566 Interfibe Corporation Arbocel® 566 is a white reclaimed cellulose fiber that is used as an acrylic roof coating as well as an acrylic textured paint. This product can also be used to add body and texture to coating formulas as well as a wood putty or glue. Arbocel® 566 can b...展开 Arbocel® 566 is a white reclaimed cellulose fiber that is used as an acrylic roof coating as well as an acrylic textured paint. This product can also be used to add body and texture to coating formulas as well as a wood putty or glue. Arbocel® 566 can be used to increase tensile strength and to increase resistance to sagging. 收起
Arbocel® 5FT Interfibe Corporation Arbocel® 5FT is a white reclaimed cellulose fiber that is insoluble in water and is primarily used as a grout and tile adhesive. This product improves both oil retention and tensile strength in formulations. Arbocel® 5FT tends to contribute to a stable ...展开 Arbocel® 5FT is a white reclaimed cellulose fiber that is insoluble in water and is primarily used as a grout and tile adhesive. This product improves both oil retention and tensile strength in formulations. Arbocel® 5FT tends to contribute to a stable viscosity and prevents sagging. 收起
Arbocel® FTP Interfibe Corporation Arbocel® FTP is a grey reclaimed cellulose fiber that is insoluble in water. This product has a bulk density of 98 g/l and is primarily used as an acrylic tennis court coating and as a cushion coat for other recreational surfaces. Arbocel® FTP features ...展开 Arbocel® FTP is a grey reclaimed cellulose fiber that is insoluble in water. This product has a bulk density of 98 g/l and is primarily used as an acrylic tennis court coating and as a cushion coat for other recreational surfaces. Arbocel® FTP features the ability to reduce resin demand and improve finished coating consistency. 收起
Arbocel® GC-66 Interfibe Corporation Arbocel® GC-66 is a grey cellulose fiber that is most often used as a gunnable (cartridge) butyl sealant. This product has a bulk density of 119g/l and provides improved oil retention, increases tensile strength, and improves performance of applicable fo...展开 Arbocel® GC-66 is a grey cellulose fiber that is most often used as a gunnable (cartridge) butyl sealant. This product has a bulk density of 119g/l and provides improved oil retention, increases tensile strength, and improves performance of applicable formulations. 收起
Arbocel® GCW10 Interfibe Corporation Arbocel® GCW10 is white reclaimed cellulose that is used in acrylic roof coating as well as acrylic textured paint. This product is insoluble in water and can improve all types of adhesive formulations, which includes: acrylic, butyl, epoxy, latex, or an...展开 Arbocel® GCW10 is white reclaimed cellulose that is used in acrylic roof coating as well as acrylic textured paint. This product is insoluble in water and can improve all types of adhesive formulations, which includes: acrylic, butyl, epoxy, latex, or any type of solvent. In addition to being used as an acrylic coating and paint, Arbocel® GCW10 can also be deployed as an extruded tape product. 收起
Arbocel® GCW90 Interfibe Corporation Arbocel® GCW90 is a white reclaimed cellulose fiber that is insoluble in water. This product is meant to enhance adhesive formulations, which include acrylic, butyl, epoxy, latex, or any type of solvent. Arbocel® GCW90 contributes to a stable viscosity...展开 Arbocel® GCW90 is a white reclaimed cellulose fiber that is insoluble in water. This product is meant to enhance adhesive formulations, which include acrylic, butyl, epoxy, latex, or any type of solvent. Arbocel® GCW90 contributes to a stable viscosity and adds tensile strength. 收起
Arbocel® JMC Interfibe Corporation Arbocel® JMC is a semi-coarse natural cellulose fiber that is grey in color. This product is primarily used as an asphalt roof coating or cement and can also be used as a thickener, reinforcement fiber, absorbent, or as an extender. In addition to the a...展开 Arbocel® JMC is a semi-coarse natural cellulose fiber that is grey in color. This product is primarily used as an asphalt roof coating or cement and can also be used as a thickener, reinforcement fiber, absorbent, or as an extender. In addition to the aforementioned features and applications, this product also provides high levels of oil absorption and increases internal reinforcement in coatings. 收起
Arbocel® JMM Interfibe Corporation Arbocel® JMM is a semi-coarse natural cellulose fiber that grey in color. This product is primarily made from natural raw materials and is primarily used as an asphalt roof coating. As an asphalt coating, Arbocel® JMM provides benefits such as high oil...展开 Arbocel® JMM is a semi-coarse natural cellulose fiber that grey in color. This product is primarily made from natural raw materials and is primarily used as an asphalt roof coating. As an asphalt coating, Arbocel® JMM provides benefits such as high oil absorption and viscosity-building characteristics. This product can also be used as a thickener, extender, or filler. 收起
Arbocel® RT Interfibe Corporation Arbocel® RT is a highly purified cellulose fiber that is light brown in color. This product is primarily used as a one and two-part epoxy or as a butyl tape/caulk. Arbocel® RT possesses the capability to contribute to a stable viscosity, can increase te...展开 Arbocel® RT is a highly purified cellulose fiber that is light brown in color. This product is primarily used as a one and two-part epoxy or as a butyl tape/caulk. Arbocel® RT possesses the capability to contribute to a stable viscosity, can increase tensile strength, and helps prevent sagging. When Arbocel® RT is added to other products it has little effect on the appearance of the final product. 收起
Request Sample DEGALAN® 4150 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylen...展开 DEGALAN® 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGALAN® 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® 4151 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (...展开 DEGALAN® 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® 4174 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium...展开 DEGALAN® 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). 收起
Request Sample DEGALAN® 4792 L Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4792 L is tailormade for applications wher...展开 DEGALAN® 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGALAN® 4792 L will achieve good adhesion to aluminium. 收起
Request Sample DEGALAN® 4793 L Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4793 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4793 L is tailormade for applications wher...展开 DEGALAN® 4793 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4793 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGALAN® 4793 L will achieve good adhesion to aluminium. 收起
Request Sample DEGALAN® P 24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® P 24 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. It is mainly applied as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® P 24 in formulati...展开 DEGALAN® P 24 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. It is mainly applied as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® P 24 in formulation with PVC-copolymer shows excellent performance in aluminum blister and food packaging. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® PM 555 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® PM 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylen...展开 DEGALAN® PM 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGALAN® PM 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® PM 666 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® PM 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (...展开 DEGALAN® PM 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® VP 4220 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethy...展开 DEGALAN® VP 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGALAN® VP 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起
Request Sample DEGALAN® VP 4221 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyren...展开 DEGALAN® VP 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起
Request Sample DEGALAN® VP 4240 D Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® VP 4240 D achieves direct adhesion to...展开 DEGALAN® VP 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® VP 4240 D achieves direct adhesion to aluminium, no primer is required. 收起
Request Sample DEGALAN® VP 4250 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethy...展开 DEGALAN® VP 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGALAN® VP 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGALAN® VP 4250 E has a higher solid content compared to the equivalent grade DEGALAN® 4150 E. 收起
Request Sample DEGALAN® VP 4251 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGALAN® VP 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polyst...展开 DEGALAN® VP 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGALAN® VP 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGALAN® VP 4251 E has a higher solid content compared to the equivalent grade DEGALAN® 4151 E. 收起
Request Sample DEGALAN® VP 4294 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGALAN® VP 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGALAN® VP 4294 E has a high solid content of 52%. 收起
Request Sample DEGALAN® VP 4311 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4311 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4311 E achieves direct adhesion on aluminium and PET. Major usage is as a binder in PVC-free, primerless heat seal lacquers for sea...展开 DEGALAN® VP 4311 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4311 E achieves direct adhesion on aluminium and PET. Major usage is as a binder in PVC-free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起
Request Sample DEGALAN® VP 4322 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tran...展开 DEGALAN® VP 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起
Request Sample DEGALAN® VP P 34 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP P 34 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. Usage as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). It is particularly recommended for use...展开 DEGALAN® VP P 34 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. Usage as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). It is particularly recommended for use as a heat seal binder with direct adhesion to aluminium. A formulation with PVC-copolymer is therefore obsolete. DEGALAN®VP P 34 shows excellent performance in aluminium blister and food packaging. 收起
Request Sample DYNAPOL® Catalyst 1203 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Catalyst 1203 is a non-ionic blocked sulfonic acid catalyst for aminoplast crosslinking. It is supplied in the form of 50% in xylene.
Request Sample DYNAPOL® Catalyst C 31 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 改性四烷氧基锡。用于瓷漆烤漆的PUR体系。封端单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® L 205 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings as a primer for hot dip galvanized steel, and may also be used for aluminium primers and appliance finishing. In can coatings, it may be used fo...展开 DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings as a primer for hot dip galvanized steel, and may also be used for aluminium primers and appliance finishing. In can coatings, it may be used for metal decorating enamels and interior can coatings. 收起
Request Sample DYNAPOL® L 206 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings for foil primers and printing inks, and may also be use in heat sealing lacquers. In coil coatings, this product may be suitable for appliance fi...展开 DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings for foil primers and printing inks, and may also be use in heat sealing lacquers. In coil coatings, this product may be suitable for appliance finishing. 收起
Request Sample DYNAPOL® L 208 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 208 is a saturated, high molecular, branched co-polyester. It is recommended for use in coil coating applications such as primers for hot dip galvanized steel and hot laminating adhesives. This product may also be suitable for can coating appli...展开 DYNAPOL® L 208 is a saturated, high molecular, branched co-polyester. It is recommended for use in coil coating applications such as primers for hot dip galvanized steel and hot laminating adhesives. This product may also be suitable for can coating applications like foil primers and printing inks. 收起
Request Sample DYNAPOL® L 210 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacqu...展开 DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacquers. 收起
Request Sample DYNAPOL® L 323 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sea...展开 DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sealing lacquers. 收起
Request Sample DYNAPOL® L 411 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 411 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings in primers for hot dip galvanized steel, primers for aluminium, hot laminating adhesives, and elastification resins, as well as in can coatings ...展开 DYNAPOL® L 411 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings in primers for hot dip galvanized steel, primers for aluminium, hot laminating adhesives, and elastification resins, as well as in can coatings such as metal decorating enamels, interior can coatings, foil primers and printing inks, and heat sealing lacquers. This product may also be used for appliance finishing and adhesion promoters. 收起
Request Sample DYNAPOL® L 490 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 490 is a saturated, high molecular, branched co-polyester. It is recommended for use in can coatings, especially for metal decorating enamels, tube-and aerosol can coatings, and interior can coatings. This product may also be used for elastific...展开 DYNAPOL® L 490 is a saturated, high molecular, branched co-polyester. It is recommended for use in can coatings, especially for metal decorating enamels, tube-and aerosol can coatings, and interior can coatings. This product may also be used for elastification resins and adhesion promoters. 收起
Request Sample DYNAPOL® L 651 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 651 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings, especially for interior can coatings and adhesion promoters. It may also be used for metal decorating enamels and heat sealing lacquers.
Request Sample DYNAPOL® L 658 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 658 is a saturated, high molecular, branched co-polyester. It is recommended for use in can coating applications such as interior can coatings. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® L 850 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal dec...展开 DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal decorating enamels. 收起
Request Sample DYNAPOL® L 907 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 907 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 912 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 912 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coatings, and may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 914 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 914 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 952 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 952 is a saturated, high molecular, linear co-polyester. In coil coatings, it is recommended for appliance finishing applications, and may also be used for primers for hot dip galvanized steel. This product is also recommended for interior can ...展开 DYNAPOL® L 952 is a saturated, high molecular, linear co-polyester. In coil coatings, it is recommended for appliance finishing applications, and may also be used for primers for hot dip galvanized steel. This product is also recommended for interior can coatings and may be suitable for metal decorating enamels. 收起
Request Sample DYNAPOL® LH 318-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 318-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as interior can coatings. This product may also be suitable for primers for metal decorating enamels.
Request Sample DYNAPOL® LH 538-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 538-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior architecture, appliance finishing, and traffic applications.
Request Sample DYNAPOL® LH 724-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and t...展开 DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and traffic uses. 收起
Request Sample DYNAPOL® LH 727-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 727-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for back coatings.
Request Sample DYNAPOL® LH 744-23 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 744-23 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for exterior architecture.
Request Sample DYNAPOL® LH 773-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 773-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings.
Request Sample DYNAPOL® LH 775-52 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 775-52 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels. It may also be used for tube and aerosol can coatings.
Request Sample DYNAPOL® LH 815-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable ...展开 DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable for coil coating applications such as primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample DYNAPOL® LH 818-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 818-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels. This product is also recommended for many coil coating applications, including interior arch...展开 DYNAPOL® LH 818-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels. This product is also recommended for many coil coating applications, including interior architecture, appliance finishing, and aluminium primers. It may also be suitable for primers for hot dip galvanized steel. 收起
Request Sample DYNAPOL® LH 820-16 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 820-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 822-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing app...展开 DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® LH 823-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 823-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially for tube and aerosol can coatings. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® LH 824-16 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 824-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 826-05/A Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other co...展开 DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other coil coating applications, such as appliance finishing, primers for hot dip galvanized steel, and primers for aluminium. 收起
Request Sample DYNAPOL® LH 828-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses...展开 DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses. 收起
Request Sample DYNAPOL® LH 830-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for co...展开 DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for coil coating applications such as exterior and interior architecture, appliance finishing, and traffic uses. 收起
Request Sample DYNAPOL® LH 831-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 831-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture, and also for traffic uses and primers for aluminium. This product may...展开 DYNAPOL® LH 831-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture, and also for traffic uses and primers for aluminium. This product may also be suitable for can coating applications such as metal decorating enamels. 收起
Request Sample DYNAPOL® LH 832-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 832-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture, appliance finishing, and traffic uses.
Request Sample DYNAPOL® LH 833-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for applian...展开 DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for appliance finishing and for metal decorating enamels. 收起
Request Sample DYNAPOL® LH 834-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 834-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 838-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applicatio...展开 DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applications like metal decorating enamels. 收起
Request Sample DYNAPOL® LH 874-26 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 874-26 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture. This product may also be suitable for appliance finishing and for back coatings.
Request Sample DYNAPOL® LH 898-14 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 898-14 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses.
Request Sample DYNAPOL® LS 4131-10 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applicati...展开 DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applications for this product may include adhesion promoters and heat sealing lacquers. 收起
Request Sample DYNAPOL® LS 415-10 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 415-10 is a saturated, medium molecular, linear, highly elastified, co-polyester resin. It is recommended for can coating applications such as interior can coatings, foil primers, and printing inks. This product may also be suitable for coil c...展开 DYNAPOL® LS 415-10 is a saturated, medium molecular, linear, highly elastified, co-polyester resin. It is recommended for can coating applications such as interior can coatings, foil primers, and printing inks. This product may also be suitable for coil coating applications like interior architecture and appliance finishing. 收起
Request Sample DYNAPOL® LS 436-12 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings...展开 DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings, including heat sealing lacquers. 收起
Request Sample DYNAPOL® LS 615 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 615 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications, especially for foil primers, printing inks, and heat sealing lacquers.
Request Sample DYNAPOL® P 1500 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® P 1500 is a saturated, high molecular, semi-crystallin, linear co-polyester resin. It is recommended for thermoplastic applications.
Request Sample DYNAPOL® S 1510 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® S 1510 is a saturated, high molecular, semi-crystallin, linear co-polyester resin. It is recommended for thermoplastic applications.
Request Sample DYNAPOL® Terra 125 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil...展开 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® Terra 127-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as e...展开 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample DYNAPOL® UB 1052-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 1173-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 1174-27 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 1174-27 is a blocked one pack polyester-polyurethane system. It is recommended for coil coating applications such as exterior architecture. This product may also be suitable for traffic uses and for industrial coatings.
Request Sample DYNAPOL® UB 1256-06 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分体系。用于瓷漆烤漆的PUR体系。封端单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 41-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 41-05 is a blocked one pack polyester-polyurethane system. It is recommended for can coating applications such as metal decorating enamels. This product may also be suitable for coil coatings, such as interior architecture, appliance finishing...展开 DYNAPOL® UB 41-05 is a blocked one pack polyester-polyurethane system. It is recommended for can coating applications such as metal decorating enamels. This product may also be suitable for coil coatings, such as interior architecture, appliance finishing, and primers for aluminium. 收起
Request Sample DYNAPOL® UB 790-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 791-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 877-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 基于饱和低分子量羟基聚酯树脂和己内酰胺封闭聚氨酯树脂的热固化单组分聚氨酯体系。用于瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 909-06 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 聚氨酯树脂溶液。用于瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
HESS NCS-10 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-12 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-15 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-3 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-5 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-8 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
PIGMENT BLUE 15:6(C.I.NO.:PB15:6,PIGMENT BLUE 15:6) Shanghai Honor Industrial Co., LTD C.I.NO.:PB15:6,PIGMENT BLUE 15:6 is the modification of copper phthalocyanine. It affords the reddest blue shade provided by any copper phthalocyanine blue pigment. In recent years it has become possible to sufficiently stabilize these pigments towards ch...展开 C.I.NO.:PB15:6,PIGMENT BLUE 15:6 is the modification of copper phthalocyanine. It affords the reddest blue shade provided by any copper phthalocyanine blue pigment. In recent years it has become possible to sufficiently stabilize these pigments towards change of modification in order to largely eliminate undesirable coloristic effects in application. In terms of fastness properties, C.I.NO.:PB15:6,PIGMENT BLUE 15:6 performs like other modifications. In baking enamels, stabilized types are completely fast to overcoating, but they are not entirely fast to bleeding in plasticized PVC. 收起
PIGMENT BLUE 60(C.I.NO.:PB60,PIGMENT BLUE 60) Shanghai Honor Industrial Co., LTD C.I.NO.:PB60,PIGMENT BLUE 60 is an Indanthrone pigment which demonstrates excellent weatherfastness. Most grades of this pigment, like other commercial vat type pigments, provide good transparency. They are primarily applied in automotive finishes, especi...展开 C.I.NO.:PB60,PIGMENT BLUE 60 is an Indanthrone pigment which demonstrates excellent weatherfastness. Most grades of this pigment, like other commercial vat type pigments, provide good transparency. They are primarily applied in automotive finishes, especially in metallic finishes. It is highly durable even in light white reductions, and shows very good fastness to organic solvents, including alcohols, esters, and ketones, aromatic and aliphatic hydrocarbons, and various types of plasticizers. This product may also be employed in plastics, rubber, and elastomers. 收起
PIGMENT BULE 15:2(C.I.NO.;PB15:2,PIGMENT BLUE 15:2) Shanghai Honor Industrial Co., LTD C.I.NO.:PB15:2,PIGMENT BLUE 15:2 encompasses a number of Copper Phthalocyanine types which are stabilized towards flocculation and change of modification. Their main area of application is in paints. In accordance with its good fastness to flocculation, C...展开 C.I.NO.:PB15:2,PIGMENT BLUE 15:2 encompasses a number of Copper Phthalocyanine types which are stabilized towards flocculation and change of modification. Their main area of application is in paints. In accordance with its good fastness to flocculation, C.I.NO.:PB15:2,PIGMENT BLUE 15:2 demonstrates good resistance to rub-out in most common binder systems. Other fastness properties in application largely equal those of P.B.15:1. In printing inks, C.I.NO.:PB15:2,PIGMENT BLUE 15:2 is employed mostly in special gravure and flexographic inks. 收起
PIGMENT BULE 15:4(C.I.NO.;PB15:4,PIGMENT BLUE 15:4) Shanghai Honor Industrial Co., LTD C.I.NO.:PB15:4,PIGMENT BLUE 15:4 is a Copper Phthalocyanine Blue pigment designated in the the Colour Index. It is stabilized towards flocculation, and shows largely the same coloristic and fastness properties as C.I.NO.:PB15:3,PIGMENT BLUE 15:3 types, bu...展开 C.I.NO.:PB15:4,PIGMENT BLUE 15:4 is a Copper Phthalocyanine Blue pigment designated in the the Colour Index. It is stabilized towards flocculation, and shows largely the same coloristic and fastness properties as C.I.NO.:PB15:3,PIGMENT BLUE 15:3 types, but often exhibits much better rheology. As with stabilized Copper Phthalocyanine Blue types, stabilization through surface treatment has proven to decrease the solvent fastness of Copper Phthalocyanine Blue, sometimes considerably so, making the pigment more sensitive to aromatics, alcohols, ethylene glycol, and ketones. This product is an attractive choice for oven drying paints, and is also recommended for gravure printing inks. 收起
PIGMENT GREEN 7 Shanghai Honor Industrial Co., LTD PIGMENT GREEN 7, C.I.NO.PG7是一种有蓝色阴影的酞菁绿颜料。它主要用于工业涂料,建筑涂料和粉末涂料,打印油墨和塑料中。这款产品具有出色的色牢度和良好的热稳定性。
PIGMENT ORANGE 13 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 13 含有C.I.NO. PO13。它与C.I.NO.:PO34,PIGMENT ORANGE 34有十分相似的颜色性,但一般更加偏黄一些。C.I.NO.:PO13, PIGMENT ORANGE 13的应用产品中聚烯烃含量很有限。此颜料是很快的清洁剂。它也被用于粘性旋转染色以及原浆染色。在图像行业,从另一方面说,使用C.I.NO.:PO13, PIGMENT ORANGE 13到一定程度用于包装印刷油墨。其耐光度比较均衡但是对一些有机溶剂色素的稳定性是极好的或近乎完美的。同...展开 PIGMENT ORANGE 13 含有C.I.NO. PO13。它与C.I.NO.:PO34,PIGMENT ORANGE 34有十分相似的颜色性,但一般更加偏黄一些。C.I.NO.:PO13, PIGMENT ORANGE 13的应用产品中聚烯烃含量很有限。此颜料是很快的清洁剂。它也被用于粘性旋转染色以及原浆染色。在图像行业,从另一方面说,使用C.I.NO.:PO13, PIGMENT ORANGE 13到一定程度用于包装印刷油墨。其耐光度比较均衡但是对一些有机溶剂色素的稳定性是极好的或近乎完美的。同样,此油墨在石蜡,植物酯和脂肪酸盐应用迅速。它们热稳定性强,能高达200°C。C.I.NO.:PO13, PIGMENT ORANGE 13也被用于金属装饰涂装,提供适合的耐光性。同样,它对清洁的漆层有抵抗性,杀菌能力也是很好的。 收起
PIGMENT ORANGE 16 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 16也被称为Dianisidine Orange。它呈黄橙色,比P.O.13和34红。PIGMENT ORANGE 16应用的主要领域在打印油墨行业。这种颜料专门用于调整P.Y.12型苯胺黄色颜料的色调。为了提供更好的透明度还生产了树脂处理类型。PIGMENT ORANGE 16不耐光也并不耐用,不适合用于涂料。但是由于它成本较低,使其适用于橡胶和纺织印刷的着色剂。
PIGMENT ORANGE 34(C.I.NO.:PO34,PIGMENT ORANGE 34) Shanghai Honor Industrial Co., LTD C.I.NO.:PO34,PIGMENT ORANGE 34 is supplied in a variety of types, which differ considerably in their particle size distributions. Specific surface areas range from 15 m2/g in highly opaque versions to about 75 m2/g in transparent types. Transparent C.I.NO...展开 C.I.NO.:PO34,PIGMENT ORANGE 34 is supplied in a variety of types, which differ considerably in their particle size distributions. Specific surface areas range from 15 m2/g in highly opaque versions to about 75 m2/g in transparent types. Transparent C.I.NO.:PO34,PIGMENT ORANGE 34 versions represent the most frequent choice for printing inks as they provide a clean, yellowish orange hue and high tinctorial strength. This product is also used in textiles and plastics to a certain extent. 收起
PIGMENT ORANGE 36, C.I.NO.: PO36 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 36, C.I.NO.: PO36, red shade orange, HP Orange 3633,an Benzimidazolone Pigments, with excellent light fastness, weather fastness, solvent fastness, and opaque organic pigments, used for industrial and automotive coatings, packaging inks, me...展开 PIGMENT ORANGE 36, C.I.NO.: PO36, red shade orange, HP Orange 3633,an Benzimidazolone Pigments, with excellent light fastness, weather fastness, solvent fastness, and opaque organic pigments, used for industrial and automotive coatings, packaging inks, metal inks. 收起