UL Prospector
Prospector
Company: Hess Pumice (NCS) Microfine Functional Fillers  Company: Shanghai Honor Industrial Co., LTD  Company: Gabriel Performance Products  Clear All 

成功!

成功保存搜索结果
141 条结果
1257 Superfast Yellow 10G Shanghai Honor Industrial Co., LTD 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起
1260 SuperFast Yellow RNG Shanghai Honor Industrial Co., LTD 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。
1488 VT/OIL Copolymer Resin Gabriel Performance Products 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...展开 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). 收起
4070-M-60 L/S Alkyd Resin Gabriel Performance Products 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints.
4070-M-70 ALKYD RESIN Gabriel Performance Products 4070-M-70 ALKYD RESIN is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery primers/enamels. This product conforms to Federal Specification TT-R-26D, Type I, Class A.
4412-M-50 M/S Alkyd Resin Gabriel Performance Products 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...展开 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. 收起
4412-V-50 Alkyd Resin Gabriel Performance Products 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings.
4489-M-60 Long Oil Silicone Modified Alkyd Resin Gabriel Performance Products 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include ...展开 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include machinery, freight cars, metal drums, signs, railings, metal doors and siding and metal structures. 4489-M-60 may also be used to make TT-E-490E enamels. 收起
4646-X-50 Epoxy Ester Gabriel Performance Products 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes.
4653-V-50 Rosin Modified Alkyd Gabriel Performance Products 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers.
4702-X-50 Chain Stopped Alkyd Resin Gabriel Performance Products 4702-X-50 Chain Stopped Alkyd Resin is based on low rosin, tall oil fatty acids. This resin gives rapid set and tack free times in air dry systems.
4714-P-75 Chain Stopped Water Soluble Alkyd Resin Gabriel Performance Products 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...展开 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. 收起
4724-XT-80 High Solids VT Alkyd Copolymer Resin Gabriel Performance Products 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs.
4731-X-80 High Solids Polyester Resin Gabriel Performance Products 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels.
4770-X-60 Short Oil Alkyd Resin Gabriel Performance Products 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability.
4778-X-50 Phenolic/rosin Modified Alkyd Resin Gabriel Performance Products 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...展开 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. 收起
4845-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated.
4870-M-70 Alkyd Resin Gabriel Performance Products 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...展开 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. 收起
4892-SD-50 Epoxy Ester Gabriel Performance Products 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enam...展开 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enamels. 收起
4915-PMA-85 High Solids Short Oil Alkyd Gabriel Performance Products 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents.
4929-X-50 Silicone Modified Short Oil Alkyd Gabriel Performance Products 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes.
4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd Gabriel Performance Products 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry.
4947-SP-75 Water Reducible Alkyd Gabriel Performance Products 4947-SP-75 Water Reducible Alkyd is designed for air dry, force dry, or low bake application. This resin is for use in all colors including whites and pastels, and also in primers. It will give good corrosion and water resistance when properly formulated.
4962-M-75 Rosin Modified Epoxy Ester Resin Gabriel Performance Products 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...展开 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. 收起
4965-XMP-80 High Solids Silicone Modified Short Oil Gabriel Performance Products 4965-XMP-80 High Solids Silicone Modified Short Oil is an air dry silicone modified alkyd resin intended for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. This product offers excellen...展开 4965-XMP-80 High Solids Silicone Modified Short Oil is an air dry silicone modified alkyd resin intended for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. This product offers excellent adhesion to most metal surfaces. 收起
4971-BC-70 Water Reducible Alkyd Resin Gabriel Performance Products 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...展开 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. 收起
4983-BA-70 High Solids Epoxy Ester Resin Gabriel Performance Products 4983-BA-70 High Solids Epoxy Ester Resin gives rapid set to touch and tack free times. Very good adhesion to metal surfaces and good chemical resistance.
4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil Gabriel Performance Products 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings.
4986-V-50 VT Modified Alkyd Resin Gabriel Performance Products 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels.
4987-V-60VT Modified Alkyd Resin Gabriel Performance Products 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal.
4996 Long Oil Alkyd Resin Gabriel Performance Products 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings.
4997-X-50 Epoxy Ester Resin Gabriel Performance Products 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat.
5009-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles.
5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin Gabriel Performance Products 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...展开 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. 收起
5017-M-60 Chlorendic Modified Alkyd Resin Gabriel Performance Products 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time.
5018-X-50 Acrylic Modified Alkyd Resin Gabriel Performance Products 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...展开 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. 收起
5060-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated.
5063-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...展开 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. 收起
5075-BS-85 Water Reducible Saturated Polyester Resin Gabriel Performance Products 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes.
5113-V-60 Medium Oil Alkyd Gabriel Performance Products 5113-V-60 Medium Oil Alkyd is suitable for use in traffic and road marking paints.
5121-BC-85 Water Reducible Alkyd Resin Gabriel Performance Products 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...展开 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. 收起
CAPCURE® 3-800 Gabriel Performance Products CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...展开 CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. 收起
CAPCURE® 3830-81 Gabriel Performance Products CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...展开 CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 收起
CAPCURE® 3830-CB Gabriel Performance Products CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...展开 CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. 收起
CAPCURE® 3850-101 Gabriel Performance Products CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...展开 CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 收起
GABEPRO® GPM-800 Gabriel Performance Products GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and i...展开 GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. 收起
GABEPRO® GPM-8003 Gabriel Performance Products GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and ...展开 GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. 收起
GABEPRO® GPM-800LO Gabriel Performance Products GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and...展开 GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. GPM-800LO is formulated to have an improved odor relative to our standard product. 收起
GABEPRO® GPM-888 Gabriel Performance Products GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low te...展开 GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. This material is formulated to cure epoxy resin in approximately 5 minutes. 收起
GABEPRO® GPM-891 Gabriel Performance Products GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinnin...展开 GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinning problems. GABEPRO® GPM-891 is designed to provide a gel time of 5 minutes when formulated with a standard bis-phenol A epoxy resin. 收起
HESS NCS-10 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-12 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-15 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-3 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-5 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-8 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
Phenoxy PK™FE Gabriel Performance Products Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...展开 Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™FE may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™FE is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起
Phenoxy PK™HA Gabriel Performance Products Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...展开 Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HA may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HA is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起
Phenoxy PK™HB Gabriel Performance Products Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...展开 Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HB may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HB is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起
Phenoxy PK™HH Gabriel Performance Products Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...展开 Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HH may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HH is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起
Phenoxy PK™HM-301 Gabriel Performance Products Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent...展开 Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). PK™HM-301 provides for improved reactivity due to the presence of primary hydroxyls and the lower glass transition temperature of the alloy. PK™HM-301 has a glass transition temperature of about 35 °C which imparts improved solids/viscosity ratios in common solvents like MEK. Coatings of PK™HM-301 exhibit high levels of flexibility and formability when appropriately cured. 收起
Phenoxy PK™HP-80 Gabriel Performance Products Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, ...展开 Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, and excellent vapor barrier properties. Phenoxy resins also react with cross-linkers like isocyanates, phenolic and melamine resins along the backbone hydroxyl groups. PK™HP-80 provides for ease of incorporation into liquid resins due to its high surface area; recommended levels of PKHP-80 incorporated into epoxy resins are 5 to 25% depending on the desired mix viscosity. 收起
PIGMENT BLUE 15:6(C.I.NO.:PB15:6,PIGMENT BLUE 15:6) Shanghai Honor Industrial Co., LTD C.I.NO.:PB15:6,PIGMENT BLUE 15:6 is the modification of copper phthalocyanine. It affords the reddest blue shade provided by any copper phthalocyanine blue pigment. In recent years it has become possible to sufficiently stabilize these pigments towards ch...展开 C.I.NO.:PB15:6,PIGMENT BLUE 15:6 is the modification of copper phthalocyanine. It affords the reddest blue shade provided by any copper phthalocyanine blue pigment. In recent years it has become possible to sufficiently stabilize these pigments towards change of modification in order to largely eliminate undesirable coloristic effects in application. In terms of fastness properties, C.I.NO.:PB15:6,PIGMENT BLUE 15:6 performs like other modifications. In baking enamels, stabilized types are completely fast to overcoating, but they are not entirely fast to bleeding in plasticized PVC. 收起
PIGMENT BLUE 60(C.I.NO.:PB60,PIGMENT BLUE 60) Shanghai Honor Industrial Co., LTD C.I.NO.:PB60,PIGMENT BLUE 60 is an Indanthrone pigment which demonstrates excellent weatherfastness. Most grades of this pigment, like other commercial vat type pigments, provide good transparency. They are primarily applied in automotive finishes, especi...展开 C.I.NO.:PB60,PIGMENT BLUE 60 is an Indanthrone pigment which demonstrates excellent weatherfastness. Most grades of this pigment, like other commercial vat type pigments, provide good transparency. They are primarily applied in automotive finishes, especially in metallic finishes. It is highly durable even in light white reductions, and shows very good fastness to organic solvents, including alcohols, esters, and ketones, aromatic and aliphatic hydrocarbons, and various types of plasticizers. This product may also be employed in plastics, rubber, and elastomers. 收起
PIGMENT BULE 15:2(C.I.NO.;PB15:2,PIGMENT BLUE 15:2) Shanghai Honor Industrial Co., LTD C.I.NO.:PB15:2,PIGMENT BLUE 15:2 encompasses a number of Copper Phthalocyanine types which are stabilized towards flocculation and change of modification. Their main area of application is in paints. In accordance with its good fastness to flocculation, C...展开 C.I.NO.:PB15:2,PIGMENT BLUE 15:2 encompasses a number of Copper Phthalocyanine types which are stabilized towards flocculation and change of modification. Their main area of application is in paints. In accordance with its good fastness to flocculation, C.I.NO.:PB15:2,PIGMENT BLUE 15:2 demonstrates good resistance to rub-out in most common binder systems. Other fastness properties in application largely equal those of P.B.15:1. In printing inks, C.I.NO.:PB15:2,PIGMENT BLUE 15:2 is employed mostly in special gravure and flexographic inks. 收起
PIGMENT BULE 15:4(C.I.NO.;PB15:4,PIGMENT BLUE 15:4) Shanghai Honor Industrial Co., LTD C.I.NO.:PB15:4,PIGMENT BLUE 15:4 is a Copper Phthalocyanine Blue pigment designated in the the Colour Index. It is stabilized towards flocculation, and shows largely the same coloristic and fastness properties as C.I.NO.:PB15:3,PIGMENT BLUE 15:3 types, bu...展开 C.I.NO.:PB15:4,PIGMENT BLUE 15:4 is a Copper Phthalocyanine Blue pigment designated in the the Colour Index. It is stabilized towards flocculation, and shows largely the same coloristic and fastness properties as C.I.NO.:PB15:3,PIGMENT BLUE 15:3 types, but often exhibits much better rheology. As with stabilized Copper Phthalocyanine Blue types, stabilization through surface treatment has proven to decrease the solvent fastness of Copper Phthalocyanine Blue, sometimes considerably so, making the pigment more sensitive to aromatics, alcohols, ethylene glycol, and ketones. This product is an attractive choice for oven drying paints, and is also recommended for gravure printing inks. 收起
PIGMENT GREEN 7 Shanghai Honor Industrial Co., LTD PIGMENT GREEN 7, C.I.NO.PG7是一种有蓝色阴影的酞菁绿颜料。它主要用于工业涂料，建筑涂料和粉末涂料，打印油墨和塑料中。这款产品具有出色的色牢度和良好的热稳定性。
PIGMENT ORANGE 13 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 13 含有C.I.NO. PO13。它与C.I.NO.:PO34，PIGMENT ORANGE 34有十分相似的颜色性，但一般更加偏黄一些。C.I.NO.:PO13, PIGMENT ORANGE 13的应用产品中聚烯烃含量很有限。此颜料是很快的清洁剂。它也被用于粘性旋转染色以及原浆染色。在图像行业，从另一方面说，使用C.I.NO.:PO13, PIGMENT ORANGE 13到一定程度用于包装印刷油墨。其耐光度比较均衡但是对一些有机溶剂色素的稳定性是极好的或近乎完美的。同...展开 PIGMENT ORANGE 13 含有C.I.NO. PO13。它与C.I.NO.:PO34，PIGMENT ORANGE 34有十分相似的颜色性，但一般更加偏黄一些。C.I.NO.:PO13, PIGMENT ORANGE 13的应用产品中聚烯烃含量很有限。此颜料是很快的清洁剂。它也被用于粘性旋转染色以及原浆染色。在图像行业，从另一方面说，使用C.I.NO.:PO13, PIGMENT ORANGE 13到一定程度用于包装印刷油墨。其耐光度比较均衡但是对一些有机溶剂色素的稳定性是极好的或近乎完美的。同样，此油墨在石蜡，植物酯和脂肪酸盐应用迅速。它们热稳定性强，能高达200°C。C.I.NO.:PO13, PIGMENT ORANGE 13也被用于金属装饰涂装，提供适合的耐光性。同样，它对清洁的漆层有抵抗性，杀菌能力也是很好的。 收起
PIGMENT ORANGE 16 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 16也被称为Dianisidine Orange。它呈黄橙色，比P.O.13和34红。PIGMENT ORANGE 16应用的主要领域在打印油墨行业。这种颜料专门用于调整P.Y.12型苯胺黄色颜料的色调。为了提供更好的透明度还生产了树脂处理类型。PIGMENT ORANGE 16不耐光也并不耐用，不适合用于涂料。但是由于它成本较低，使其适用于橡胶和纺织印刷的着色剂。
PIGMENT ORANGE 34(C.I.NO.:PO34,PIGMENT ORANGE 34) Shanghai Honor Industrial Co., LTD C.I.NO.:PO34,PIGMENT ORANGE 34 is supplied in a variety of types, which differ considerably in their particle size distributions. Specific surface areas range from 15 m2/g in highly opaque versions to about 75 m2/g in transparent types. Transparent C.I.NO...展开 C.I.NO.:PO34,PIGMENT ORANGE 34 is supplied in a variety of types, which differ considerably in their particle size distributions. Specific surface areas range from 15 m2/g in highly opaque versions to about 75 m2/g in transparent types. Transparent C.I.NO.:PO34,PIGMENT ORANGE 34 versions represent the most frequent choice for printing inks as they provide a clean, yellowish orange hue and high tinctorial strength. This product is also used in textiles and plastics to a certain extent. 收起
PIGMENT ORANGE 36, C.I.NO.: PO36 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 36, C.I.NO.: PO36, red shade orange, HP Orange 3633,an Benzimidazolone Pigments, with excellent light fastness, weather fastness, solvent fastness, and opaque organic pigments, used for industrial and automotive coatings, packaging inks, me...展开 PIGMENT ORANGE 36, C.I.NO.: PO36, red shade orange, HP Orange 3633,an Benzimidazolone Pigments, with excellent light fastness, weather fastness, solvent fastness, and opaque organic pigments, used for industrial and automotive coatings, packaging inks, metal inks. 收起
PIGMENT ORANGE 38 (C.I.NO.:PO38, PIGMENT ORANGE 38) Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 38是一种黄色调红色，主要用于打印油墨和塑料中。它显示出良好的牢度，适用于胶印油墨以及金属装饰印刷。塑料行业主要使用P.O.38为PVC，聚烯烃和聚苯乙烯着色。在涂料行业中，这种颜料有出色的耐溶剂性，可以在高档工业涂料等对于光牢度和耐用性要求不太苛刻的应用中使用。
PIGMENT ORANGE 71, C.I.NO.71, DPP Orange - HP ORANGE 3349 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 71,C.I.NO.71, DPP orange pigments is a medium orange pigment. It is mainly used for plastic color concentrate, in HDPE, PP AND PVC resins. This product has perfect migration-resistance properties, and heat resistance up to 300 degrees. It i...展开 PIGMENT ORANGE 71,C.I.NO.71, DPP orange pigments is a medium orange pigment. It is mainly used for plastic color concentrate, in HDPE, PP AND PVC resins. This product has perfect migration-resistance properties, and heat resistance up to 300 degrees. It is also used in printing inks with perfect solvent fastness and light-fastness and weather fastness. 收起
PIGMENT ORANGE 73, C.I.NO.73-HP ORANGE 3642 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 73,C.I.NO.73, DPP orange, Orange 3642 is recommended for high grade industrial paints, like OEM, Solvent stove paints, powder coatings and Coil coatings.
PIGMENT RED 112 Shanghai Honor Industrial Co., LTD PIGMENT RED 112 是一种十分好的中度红色颜料，混合了C.I. No. PR112。它的主要应用市场包括油墨印刷，抛光剂及涂料；但它也被用于其他一些领域。印刷油墨领域使用此产品主要在凸版印刷和平板印刷，凹版包装印刷油墨，柔性油墨。它的着色力很强。此颜料显现出了极好的耐光性。本产品极易溶于脂肪酸盐中，虽然它完全不能溶于石蜡，只是仅仅微溶于黄油及其它油脂类（步骤3）。它们也被干净漆涂层影响和具有杀菌作用。 在油漆中，PIGMENT RED 112 产生了类似红色的颜色。它或许能被使用到，但绝...展开 PIGMENT RED 112 是一种十分好的中度红色颜料，混合了C.I. No. PR112。它的主要应用市场包括油墨印刷，抛光剂及涂料；但它也被用于其他一些领域。印刷油墨领域使用此产品主要在凸版印刷和平板印刷，凹版包装印刷油墨，柔性油墨。它的着色力很强。此颜料显现出了极好的耐光性。本产品极易溶于脂肪酸盐中，虽然它完全不能溶于石蜡，只是仅仅微溶于黄油及其它油脂类（步骤3）。它们也被干净漆涂层影响和具有杀菌作用。 在油漆中，PIGMENT RED 112 产生了类似红色的颜色。它或许能被使用到，但绝不仅限于空气干燥漆之中，而且在烘烤搪瓷中，提供了合适的条件以避免爆裂。烘烤温度介于140-160°C 之间，浓度阈值为0.1%；介于180-200°C，极限位2.5%。其耐涂性不尽人意。但耐光性和耐环境性十分优异，甚至减少了白色。优异的牢固性能使得该产品适用于高级涂料，比如汽车漆及其他普通工业涂料。电泳漆是一种特殊用途的涂料，在乳胶漆中也有其特殊的用途，尽管它在外观上的固定性相对较差。 收起
PIGMENT RED 12 Shanghai Honor Industrial Co., LTD PIGMENT RED 12 是其中一种更为重要的波尔多有色材料，混合了C.I. No. PR12。印刷行业在平版印刷，凹版包装印刷和柔性水墨中广泛使用了PIGMENT RED 12。此颜料十分的耐晒而不褪色。它显示出很高的着色强度；对溶剂及其他的媒介的印刷牢度很适度。印刷品会受石蜡、黄油及其他的因素影响。PIGMENT RED 12 同样相似的对碱很敏感。 纺织品印刷使用PIGMENT RED 12 绝对的耐晒且不褪色。它能够承受最高达150°C的高温；甚至到了180°C，此颜料可保持其初始颜色值。涂...展开 PIGMENT RED 12 是其中一种更为重要的波尔多有色材料，混合了C.I. No. PR12。印刷行业在平版印刷，凹版包装印刷和柔性水墨中广泛使用了PIGMENT RED 12。此颜料十分的耐晒而不褪色。它显示出很高的着色强度；对溶剂及其他的媒介的印刷牢度很适度。印刷品会受石蜡、黄油及其他的因素影响。PIGMENT RED 12 同样相似的对碱很敏感。 纺织品印刷使用PIGMENT RED 12 绝对的耐晒且不褪色。它能够承受最高达150°C的高温；甚至到了180°C，此颜料可保持其初始颜色值。涂料行业主要将其用在干燥漆之中。它仅适用于高浓度配方。特别是在充分和相关的色调中。PIGMENT RED 12 具有相当令人满意的耐光性。此种颜料实际上偶尔也用于其牢度性能符合其规格的乳胶漆中。此产品也有一些特殊的运用， 比如说汽车清洁剂、地板抛光、鞋抛光等，并经常用于将办公用品和皮革染色。 收起
PIGMENT RED 122, C.I.NO.: PR122 Shanghai Honor Industrial Co., LTD PIGMENT RED 122,C.I.NO.: PR122, HP Red 26120 is a Quinacridone pigments with color index number pigment red 122, C.I.NO.: PR122, this is belong to Quinacridone group, with excellent anti-migration and heat stability property, and blue shade red or Pink co...展开 PIGMENT RED 122,C.I.NO.: PR122, HP Red 26120 is a Quinacridone pigments with color index number pigment red 122, C.I.NO.: PR122, this is belong to Quinacridone group, with excellent anti-migration and heat stability property, and blue shade red or Pink color. Is mainly used for high quality coatings, inks and plastics. 收起
PIGMENT RED 146 Shanghai Honor Industrial Co., LTD PIGMENT RED 146是一种具有很好耐溶性的蓝红色颜料。它主要用于印刷油墨、涂料和油漆。油墨行业使用C.I.NO.:PR146, PIGMENT RED 146来作为凸版印刷和胶印的油墨，同时也作为包装凹印和柔印印刷的油墨。此颜料可抗石油溶剂、邻苯二甲酸二丁酯、黄油、肥皂脂肪酸盐、碱、酸。此外，它们也十分稳定以清理漆涂层。至于热稳定性，C.I.NO.:PR146, PIGMENT RED 14能保留其颜色至10分钟(200°C)，以及在180°C时30分钟。C.I.NO.:PR146, PIGME...展开 PIGMENT RED 146是一种具有很好耐溶性的蓝红色颜料。它主要用于印刷油墨、涂料和油漆。油墨行业使用C.I.NO.:PR146, PIGMENT RED 146来作为凸版印刷和胶印的油墨，同时也作为包装凹印和柔印印刷的油墨。此颜料可抗石油溶剂、邻苯二甲酸二丁酯、黄油、肥皂脂肪酸盐、碱、酸。此外，它们也十分稳定以清理漆涂层。至于热稳定性，C.I.NO.:PR146, PIGMENT RED 14能保留其颜色至10分钟(200°C)，以及在180°C时30分钟。C.I.NO.:PR146, PIGMENT RED 14在纺织品中还显现出了良好的耐光性。C.I.NO.:PR146, PIGMENT RED 14还可用于涂料，主要应用于乳液建筑涂料；它也适合应用在耐久性不是很重要的一般工业涂料行业。C.I.NO.:PR146, PIGMENT RED 14可用于与钼酸盐颜料产生明亮的不透明红色颜料组合。在聚合物中，C.I.NO.:PR146, PIGMENT RED 14只用于彩色硬质PVC。C.I.NO.:PR146, PIGMENT RED 14是各种特殊应用的合适选择。该列表中包括木材污渍。此产品具有快速覆盖和稳定性在硝基酸催化聚酯清漆。强烈的色彩处于蓝色色标第七等耐光性。它的其它应用领域包括办公用品和艺术类颜料，清洁剂、纸张的纺前原浆着色，洗衣标记等。 收起
PIGMENT RED 169(C.I.NO.:PR169,PIGMENT RED 169) Shanghai Honor Industrial Co., LTD C.I.NO.:PR169,PIGMENT RED 169 is suited to letterpress and offset printing inks, where it provides the standard purple-red for three and four color printing in accordance with the DIN scale. Moreover, this product is frequently used for toluene based publ...展开 C.I.NO.:PR169,PIGMENT RED 169 is suited to letterpress and offset printing inks, where it provides the standard purple-red for three and four color printing in accordance with the DIN scale. Moreover, this product is frequently used for toluene based publication gravure printing inks, where it is sometimes applied in combination with C.I.NO.:PR53,PIGMENT RED 53. One of the major fields of application for C.I.NO.:PR169,PIGMENT RED 169 is in aqueous flexographic printing inks. 收起
PIGMENT RED 176 (C.I.NO.:PR176, PIGMENT RED 176) Shanghai Honor Industrial Co., LTD PIGMENT RED 176提供蓝红色调，比C.I.NO.:PR187，PIGMENT RED 187和208更蓝，比C.I.NO.:PR185和PIGMENT RED 185更黄。它主要用于塑料行业。该颜料在增塑PVC中显示出很好的迁移牢度。这款颜料还用于聚烯烃和聚苯乙烯，其耐光性同样良好。应用包括层压塑料板装饰打印等。PIGMENT RED 176的色调接近三和四色打印的标准洋红色。
PIGMENT RED 177(C.I.NO.:PR177,PIGMENT RED 177) Shanghai Honor Industrial Co., LTD C.I.NO.:PR177,PIGMENT RED 177 is mainly applied in industrial paints, in spin dyeing, and in polyolefin and PVC coloration. Combined with inorganic pigments, ir exhibits high lightfastness and weatherfastness. Combinations with Molybdate Red are also used...展开 C.I.NO.:PR177,PIGMENT RED 177 is mainly applied in industrial paints, in spin dyeing, and in polyolefin and PVC coloration. Combined with inorganic pigments, ir exhibits high lightfastness and weatherfastness. Combinations with Molybdate Red are also used in automotive finishes, especially for automotive O.E.M. finishes and for automotive refinishes. The types are highly transparent, which makes them suitable colorants for transparent paints. At typical processing temperatures for oven drying systems, C.I.NO.:PR177,PIGMENT RED 177 is entirely fast to overcoating. This product is recommended for automotive finishes, plastics, transparent films, PUR and PVC, spin dyeing, and printing inks. 收起
PIGMENT RED 179(C.I.NO.:PR179,PIGMENT RED 179) Shanghai Honor Industrial Co., LTD C.I.NO.:PR179,PIGMENT RED 179, a dimethyllperylimide compound, is probably the most significant member of its class. The pigment is primarily used in industrial coatings, especially for high grade original automotive (O.E.M) finishes and automotive refini...展开 C.I.NO.:PR179,PIGMENT RED 179, a dimethyllperylimide compound, is probably the most significant member of its class. The pigment is primarily used in industrial coatings, especially for high grade original automotive (O.E.M) finishes and automotive refinishes. It can provide clean shades of red, as well as maroon and Bordeaux shades. Transparent types are available for metallic finishes, sometimes also in combination with other organic or inorganic pigments. This product is used to a considerable extent in paints, and may also be used in plastics. 收起
PIGMENT RED 184 Shanghai Honor Industrial Co., LTD PIGMENT RED 184 带来了C.I.NO.:PR146.中偏蓝色的红色色彩。这两种产品在应用之中也十分的类似。它的印刷品抗脂肪酸盐、黄油、石蜡、邻苯二甲酸二丁酯、石油溶剂，和甲苯。C.I.NO.:PR184, PIGMENT RED 184是特殊用于抗碱、酸、耐皂性环境中。优良的耐有机溶剂性使得C.I.NO.:PR184, PIGMENT RED 184成为凸版印刷和胶印应用的合适选择，以及包装凹印油墨、柔印油墨。其金属装饰印刷品能抵抗清漆涂层。. C.I.NO.:PR184, PIGMENT ...展开 PIGMENT RED 184 带来了C.I.NO.:PR146.中偏蓝色的红色色彩。这两种产品在应用之中也十分的类似。它的印刷品抗脂肪酸盐、黄油、石蜡、邻苯二甲酸二丁酯、石油溶剂，和甲苯。C.I.NO.:PR184, PIGMENT RED 184是特殊用于抗碱、酸、耐皂性环境中。优良的耐有机溶剂性使得C.I.NO.:PR184, PIGMENT RED 184成为凸版印刷和胶印应用的合适选择，以及包装凹印油墨、柔印油墨。其金属装饰印刷品能抵抗清漆涂层。. C.I.NO.:PR184, PIGMENT RED 184还用于橡胶之中。 收起
PIGMENT RED 185 (C.I.NO.:PR185, PIGMENT RED 185) Shanghai Honor Industrial Co., LTD PIGMENT RED 185提干净，偏蓝色调的红色。这款颜料完全或几乎完全不溶于普通溶剂中。其主要应用在图形打印和塑料的大量着色领域。打印油墨行业在所有印刷技术中使用C.I.NO.:PR185，PIGMENT RED 185。打印油墨显示出很好的溶剂牢度。C.I.NO.:PR185，PIGMENT RED 185在塑料行业广泛应用于为PVC、聚氯乙烯和聚烯烃上色。
PIGMENT RED 188 Shanghai Honor Industrial Co., LTD PIGMENT RED 188 是一种偏黄的红色颜料，其具有很好的色牢性。其主要应用领域是在印刷油墨和油漆，此颜料适用于所有的印刷技术。1/1-1/25 SD凸版印刷论证此产品5-6等在蓝色色标上的耐光性等同于5等。颜料的着色强度表现的较差。然而，这些印刷品能很快抗御有机溶剂、脂肪、石蜡、脂肪酸盐、碱和酸。它们亦可以快速清除漆涂层，并可用于消毒。在DIN 16 524/1混合溶剂中色牢度稳定，然而，这还不够完美。说到它的热稳定性，, P.R.188颜料可容忍暴露在最高220°C的环境中10分钟，或是在18...展开 PIGMENT RED 188 是一种偏黄的红色颜料，其具有很好的色牢性。其主要应用领域是在印刷油墨和油漆，此颜料适用于所有的印刷技术。1/1-1/25 SD凸版印刷论证此产品5-6等在蓝色色标上的耐光性等同于5等。颜料的着色强度表现的较差。然而，这些印刷品能很快抗御有机溶剂、脂肪、石蜡、脂肪酸盐、碱和酸。它们亦可以快速清除漆涂层，并可用于消毒。在DIN 16 524/1混合溶剂中色牢度稳定，然而，这还不够完美。说到它的热稳定性，, P.R.188颜料可容忍暴露在最高220°C的环境中10分钟，或是在180°C 达到30分钟. 涂料工业使用C.I.NO.:PR188, PIGMENT RED 188在高档工业涂料的优秀稳定性。它的全色调等于蓝色色标上的第七等。TiO2降到1：5也能表现出相同点耐光性。颜料的耐候性同样等同于全色彩和其余相近的深色调。此颜料在烘烤温度低于160°C的情况下不渗透分散，它在涂料在可以保持其色彩在最高200°C当中。C.I.NO.:PR188, PIGMENT RED 188常常可在装饰性涂料中找到，此领域在美国的适用范围十分广泛。高度不透明的C.I.NO.:PR188, PIGMENT RED 188级已被推广在市场中。它比其他任何种类带来了灿烂的，至今更加偏黄的红色。 收起
PIGMENT RED 2 Shanghai Honor Industrial Co., LTD PIGMENT RED 2 是一种中等红色类型颜料混合了C.I. No. PR2。它主要的实用范围是印刷油墨领域。此类型物质是一些粗糙的颗粒，经常被用来配制高度着色的油墨，具有良好的流动性，并能够够满足相应的应用要求的类型。此颜料同时也展现出了良好的光泽型。 PIGMENT RED 2 在一些特殊的印刷品之中并不是表现的很完美。它主要用于平版印刷和凹版包装印刷和柔印水墨。此颜料同时也适用于纺织印刷。本产品还可作为一种颜料连接黏胶纤维和黏胶纤维素染色纺织品以及作为木浆棉膜的纺前染色。
PIGMENT RED 202(C.I.NO.:PR202,PIGMENT RED 202) Shanghai Honor Industrial Co., LTD C.I.NO.:PR202,PIGMENT RED 202, a very lightfast and weatherfast mixed phase quinacridone pigment, provides a dull bluish shade. It is primarily applied in automotive finishes. Even highly transparent types with fine particle sizes provide two-coat metalli...展开 C.I.NO.:PR202,PIGMENT RED 202, a very lightfast and weatherfast mixed phase quinacridone pigment, provides a dull bluish shade. It is primarily applied in automotive finishes. Even highly transparent types with fine particle sizes provide two-coat metallic finishes which offer excellent rheological properties. In terms of fastness to overcoating and other aspects of pigment performance and properties, C.I.NO.:PR202,PIGMENT RED 202 largely behaves like C.I.NO.:PR122,PIGMENT RED 122. 收起
PIGMENT RED 208(C.I.NO.:PR208,PIGMENT RED 208) Shanghai Honor Industrial Co., LTD C.I.NO.:PR208,PIGMENT RED 208 affords medium shades of red. The pigment exhibits good fastness to chemicals and solvents. Its main area of application is in the mass coloration of plastics and in packaging gravure printing inks. This product can be also b...展开 C.I.NO.:PR208,PIGMENT RED 208 affords medium shades of red. The pigment exhibits good fastness to chemicals and solvents. Its main area of application is in the mass coloration of plastics and in packaging gravure printing inks. This product can be also be used in spin dyeing, general industrial finishes, and in a variety of specialty media. 收起
PIGMENT RED 213 (C.I.NO.:PR213, PIGMENT RED 213) Shanghai Honor Industrial Co., LTD PIGMENT RED 213是一种很少在日本以外遇到的产品。颜料呈现蓝色调红色，匹配三和四色打印的标准品红色时其蓝色太深。市售类型相对较不透明，但是与其它Naphthol AS颜料相比比较不耐光。
PIGMENT RED 22 Shanghai Honor Industrial Co., LTD PIGMENT RED 22 是一种黄-红色颜料混合C.I. No. PR22.。它主要的市场在纺织品印刷，但它也被用于整个图像领域，比如说在平面印刷和凹版印刷，尤其是在硝化纤维为基础的油墨中。PIGMENT RED 22 在抗脂肪酸盐与碱性必须条件下使用十分有效。这款产品有着很高的着色强度，它在一定程度上又比C.I.NO.:PR9 淡一些，PIGMENT RED 9有着很高的区域浓度；在较低浓度的色素区是偏黄色。涂料工业在空气干燥系统中采用PIGMENT RED 22，在乳胶漆中，有时偶尔用于工业用漆。...展开 PIGMENT RED 22 是一种黄-红色颜料混合C.I. No. PR22.。它主要的市场在纺织品印刷，但它也被用于整个图像领域，比如说在平面印刷和凹版印刷，尤其是在硝化纤维为基础的油墨中。PIGMENT RED 22 在抗脂肪酸盐与碱性必须条件下使用十分有效。这款产品有着很高的着色强度，它在一定程度上又比C.I.NO.:PR9 淡一些，PIGMENT RED 9有着很高的区域浓度；在较低浓度的色素区是偏黄色。涂料工业在空气干燥系统中采用PIGMENT RED 22，在乳胶漆中，有时偶尔用于工业用漆。其应用领域包括paper mass和表面着色，颜色铅笔，艺术上色及其他用途。 收起
PIGMENT RED 242(C.I.NO.:PR242,PIGMENT RED 242) Shanghai Honor Industrial Co., LTD C.I.NO.:PR242,PIGMENT RED 242 affords a yellowish red shade, referred to as scarlet. It exhibits good to excellent resistance to organic solvents, such as alcohols, esters, ketones, and aliphatic hydrocarbons. The pigment is more soluble in aromatic hydro...展开 C.I.NO.:PR242,PIGMENT RED 242 affords a yellowish red shade, referred to as scarlet. It exhibits good to excellent resistance to organic solvents, such as alcohols, esters, ketones, and aliphatic hydrocarbons. The pigment is more soluble in aromatic hydrocarbons. C.I.NO.:PR242,PIGMENT RED 242, like other members of its class, is fast to alkali and acid. This product is used in plastics, paints, and printing inks. 收起
PIGMENT RED 254(C.I.NO.:PR254,PIGMENT RED 254) Shanghai Honor Industrial Co., LTD C.I.NO.:PR254,PIGMENT RED 254 is a DPP pigment which shows good coloristic and fastness properties. It is a widely used pigment for high industrial paints, especially in original automotive finishes and automotive refinishes. This product shows very good ...展开 C.I.NO.:PR254,PIGMENT RED 254 is a DPP pigment which shows good coloristic and fastness properties. It is a widely used pigment for high industrial paints, especially in original automotive finishes and automotive refinishes. This product shows very good fastness to organic solvents, fast blooming and bleeding, and good lightfastness and weatherfastness. It is used to color plastics which are processed at high temperatures. 收起
PIGMENT RED 255(C.I.NO.:PR255,PIGMENT RED 255) Shanghai Honor Industrial Co., LTD C.I.NO.:PR255,PIGMENT RED 255 affords reddish shades of orange, actually scarlet shades, which are distinctly more yellowish than those of C.I.NO.:PR254,PIGMENT RED 254. It shows excellent hiding power, lightfastness, and weatherfastness. This product is ...展开 C.I.NO.:PR255,PIGMENT RED 255 affords reddish shades of orange, actually scarlet shades, which are distinctly more yellowish than those of C.I.NO.:PR254,PIGMENT RED 254. It shows excellent hiding power, lightfastness, and weatherfastness. This product is recommended for high grade lead-free industrial finishes, especially automotive O.E.M. finishes. It is also of interest for the use in tinting systems for decorative paints. Within the plastics area it can be used in rigid and plasticized PVC. The list of applications also includes packaging and decorative printing inks. 收起
PIGMENT RED 269 Shanghai Honor Industrial Co., LTD PIGMENT RED 269的C.I.号码为PR269。它提供蓝色色调。这款颜料推荐用于打印油墨。
PIGMENT RED 272(C.I.NO.:PR272,PIGMENT RED 272) Shanghai Honor Industrial Co., LTD C.I.NO.:PR272,PIGMENT RED 272 is a medium red shade pigment and exhibits high color strength. It is said to be designed for use in PE, PP and PVC plastics applications, such as injection molding, sheet and cable extrusion and calendering as well as PP fib...展开 C.I.NO.:PR272,PIGMENT RED 272 is a medium red shade pigment and exhibits high color strength. It is said to be designed for use in PE, PP and PVC plastics applications, such as injection molding, sheet and cable extrusion and calendering as well as PP fibers application. The heat stability in these plastic materials reaches 300°C in the mass tone and 260°C in white reductions with a very low influence on shrinkage in HDPE. The pigment demonstrates good lightfastness and weatherfastness, but mass tone colorations tend to darken. Due to its good opacity, the pigment is recommended in general industrial paint applications for lead- and cadmium-free formulations. 收起
PIGMENT RED 3 Shanghai Honor Industrial Co., LTD PIGMENT RED 3也叫做C.I.NO.:PR3或甲苯胺红。它主要用于风干涂料。其色相随着粒径改变有很大变化，因此颜料制造商通常可以提供一系列品牌。较粗粒径的产品通常是蓝色的。甲苯胺红的全色彩非常耐光和耐候，但是随着添加白色颜料而迅速变差。该颜料推荐在全色或相似的深色调使用。推荐在室内应用或短期广告和标记等应用中使用。C.I.NO.:PR3, PIGMENT RED 3在打印油墨中的应用受到限制。在塑料行业，Toluidine Red仅限用于PVC。
PIGMENT RED 31 Shanghai Honor Industrial Co., LTD PIGMENT RED 31 呈现出红中带蓝色调，波尔多红（枣红色）。它主要应用在橡胶中，它具有良好的耐光性。此产品据观察不会渗透到自然橡胶或织物背面。该颜料能抗冷、抗热开水、肥皂类脂肪酸盐，洗涤剂溶剂，5%个水乙酸，和50%乙醇水。在聚苯乙烯、聚甲基丙烯酸酯、不饱和聚酯树脂等类似的中介物，C.I.NO.:PR31，PIGMENT RED 31高度透明的中等红色，这可被用作汽车尾灯及其它信号灯目的。它在PS和PMA挤压制品中的热稳定性好（5分钟），可在最高约280°C仍然稳定。C.I.NO.:PR31, ...展开 PIGMENT RED 31 呈现出红中带蓝色调，波尔多红（枣红色）。它主要应用在橡胶中，它具有良好的耐光性。此产品据观察不会渗透到自然橡胶或织物背面。该颜料能抗冷、抗热开水、肥皂类脂肪酸盐，洗涤剂溶剂，5%个水乙酸，和50%乙醇水。在聚苯乙烯、聚甲基丙烯酸酯、不饱和聚酯树脂等类似的中介物，C.I.NO.:PR31，PIGMENT RED 31高度透明的中等红色，这可被用作汽车尾灯及其它信号灯目的。它在PS和PMA挤压制品中的热稳定性好（5分钟），可在最高约280°C仍然稳定。C.I.NO.:PR31, PIGMENT RED 31对常见的过氧化物催化剂很稳定。此颜料有很好耐光性(0.025%在PMA制剂中，1.5mm毫米厚度层:位于蓝色色标第七等)。C.I.NO.:PR31, PIGMENT RED 31也常被用于纺织印染。 收起
PIGMENT RED 48:1 (C.I.NO.:PR48:1, PIGMENT RED 48:1) Shanghai Honor Industrial Co., LTD PIGMENT RED 48:1是一种通用的钡盐颜料。根据产品的表面情况提供淡黄色到中等红色色调。在多种常见有机溶剂中的牢度良好，如酯，酮，脂肪族和芳香烃等。P.R.48:1的主要应用领域是在打印油墨和塑料行业中。为了在印刷中增加透明性和减少印刷变成青铜色的强烈倾向，设计用于打印油墨的颜料常常以树脂化形式供应。这款产品常用于廉价的工业涂料中，展现出良好的重涂色牢度。
PIGMENT RED 48:2 (C.I.NO.:PR48:2, PIGMENT RED 48:2) Shanghai Honor Industrial Co., LTD PIGMENT RED 48:2是一种钙盐颜料，赋予蓝红色或红宝石般的色调。它常用于凹版包装油墨，以及印刷油墨中，特别是以NC为基础的包装油墨中。这款产品推荐用于三和四色印刷区域，如杂志封面等。这款产品通常用于塑料，提供良好的着色强度。
PIGMENT RED 49:1 Shanghai Honor Industrial Co., LTD PIGMENT RED 49:1是一种孔雀蓝，C.I. No.为PR49:1。它与Lake Red C颜料（P.R.53:1）在有机溶剂、酸碱和应用中的色牢度方面类似，热稳定性较差。应用方面，特别是在美国，包括弹性体，工业涂料，风干和硝基涂料。主要市场是印刷油墨。