| Acronal® 296 D ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 阴离子乳液聚合物，粘度中等。它含有细小、良好分散的颗粒。它与颜填料具有出色的相容性。对颜料具有非常高的粘合力。未着色的Acronal®296 D apare涂膜透明、柔韧、高光泽，具有极高的耐水性和非常好的耐皂化性能 | |
| Acronal® 296 DS ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 高品质、通用型建筑涂料用乳液聚合物。Acronal® 296 DS ap是一种阴离子型低粘度的乳液聚合物，它由细小的微粒组成。与颜填料有出色的兼容性，具备超强的颜料粘结力。Acronal® 296 DS ap乳液膜在室温下不粘手。Acronal® 296 DS ap乳液膜透明，柔软且有光泽，具有极好的耐水性，且具备出色的耐皂化特性。 | |
| Acronal® 7015 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 一种具有中等黏度的细微分散乳液聚合物。它是一种拥有与常用填料及添加物良好兼容性的丙烯酸乳液，同时其对填料有着很好的粘结力。其在20℃左右可形成具有高硬度、高弹性以及很好的抗黏连性特点的膜.Acronal® 7015形成的膜具有优异的耐水性和耐光性，同时对于皂化和风化有着很好的抗性。它有着良好的耐水白性，即使在水中浸泡很长时间变白后仍能回复。 | |
| Acronal® 7016 G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 一种阴离子型中等粘度的乳液聚合物。它由细小的微粒组成，是一种拥有优异户外耐久性和耐沾污性的纯丙烯酸共聚物。能使涂膜拥有良好的耐擦洗性、抗粘连性、对混凝土表面有良好的附着力。 | |
| Acronal® 7026 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 良好分散的的聚合物乳液，粘度低。该乳液形成的涂膜在很宽的温度范围内具有高弹性，尤其是在寒冷气候环境下。与填料和颜料具有出色的相容性。它具有非常高的颜料粘合力。用Acronal®7026形成的涂膜具有出色的耐水、耐碱性能和耐风化性能。Acronal®7026配制的弹性墙面涂料具有良好的耐毛细裂纹，由于采用了紫外表面交联技术，即使在温暖高污染的环境下也具有非常好的耐玷污性能 | |
| Acronal® 7026 G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 一种细小粒径的低粘度乳液聚合物。这种乳液膜在各种温度条件下，特别是在气候寒冷地区都能保持良好弹性。它与颜填料相容性非常好，具有很强的颜填料的承载能力。Acronal® 7026 G 形成的涂膜具有优异的耐水、耐碱和抗风化性能。其配制的弹性墙面漆具有细微裂纹桥接功能，同时由于运用了紫外光表面交联技术，即便在热的天气和污染严重的环境中也表现出很强的耐沾污性能。 | |
| Acronal® 7035 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 耐擦洗性能优异的高PVC内墙涂料用乳液聚合物 Acronal®7035是不含APEO的低粘度阴离子乳液.它由细小的乳液粒子组成. Acronal®7035具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然 使得涂料具有突出的耐擦洗性 | |
| Acronal® 7035 G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 耐擦洗性能优异的高PVC内墙涂料用乳液聚合物。Acronal®7035G是不含APEO的低粘度阴离子乳液.它由细小的乳液粒子组成。Acronal®7035G具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然使得涂料具有突出的耐擦洗性 | |
| Acronal® 7037 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 具有极佳耐擦洗性多功能内墙建筑涂料用乳液聚合物,Acronal® 7037是一种不含APEO的低黏度阴离子乳液聚合物。它由细小的乳液粒子组成。Acronal® 7037 具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然使得涂料具有突出的耐擦洗性。 | |
| Acronal® 7051 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 适用于真石漆和质感涂料的水性聚合物乳液 Acronal®7051是一种具有中等黏度的细微分散乳液聚合物。它是一种与常用颜料及骨料具有良好相容性的纯丙烯酸乳液，同时其具有优异的钙离子稳定性。其涂膜坚韧，具有柔性及抗粘连性。Acronal® 7051形成的膜具高耐水性、耐光性，优异的抗皂化性及耐候性。即使在水中长时间浸泡，涂膜也不会水白。 | |
| Acronal® A 684 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 通用型，具有出色的附着力和出色的耐候性 | |
| Acronal® CN 18 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 不含甲醛、中等黏度、细小粒径的乳液聚合物。与颜填料有出色的兼容性。聚合物乳液干膜透明，柔软有光泽，杰出的耐水和抗皂化性能。 | |
| Acronal® DS 6266 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 可广泛用于各种乳胶漆和质感面漆的聚合物乳液 Acronal®DS 6266 ap 是一种中等粘度的阴离子型聚合物乳液。它拥有极细的 粒径，能形成无色、透明滑爽的涂膜。产品性能优异，具有良好的抗发白性、低吸水性和高耐候性。 | |
| Acronal® ECO 338 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是一种细粒径，低黏度的水性乳液。无气味，而且不包含氨水，溶剂及增塑剂。它与常用的颜料与填料展现优异的相容性。形成的涂膜透明，柔性且有光泽，并具备好的耐水性及耐水解性。 | |
| Acronal® ECO 502 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是低黏度，细小乳胶，无气味，不含氨水及任何溶剂或增塑剂，拥有出色的颜料相容性和粘结能力，而且配方内不需要助成膜助剂。其干膜透明，有光泽和弹性，并有很好的耐水和抗水解性能。 | |
| Acronal® ECO 612 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 全丙烯酸共聚物，用于低光泽建筑涂料。用Acronal®ECO 612 ap形成的涂料能在保持VOC含量接近零的条件下满足严苛性能。由于其出色的附着力和抗粘连性能，Acronal®ECO 612 ap配制的涂料非常适合各种表面类型和应用。另外，Acronal®ECO 612 ap表现出优秀的耐常规家庭污染物的能力 | |
| Acronal® ECO 702 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是一种阴离子型中等黏度，细小粒径的水性乳胶。拥有优异的颜料和填料的相容性与粘结性能。Acronal ECO 702 ap 在无颜填料时形成的膜透明，有弹性和光泽，并具有出色的耐水和抗皂化性能。 | |
| Acronal® ECO 7078 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 耐沾污性能出众的乳液聚合物。（依据 GB/T 9780 建筑涂料涂层耐沾污性试验方法）Acronal® ECO 7078 粒径细，粘度低， 无气味且不含氨、溶剂和增塑剂。 在常用的内墙涂料配方中，表现出优秀的耐沾污性与耐湿擦洗性。 | |
| Acronal® ECO 9056 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 阴离子乳液聚合物，具有中等粘度。它含有细小良好分散的颗粒。它与颜料和填料具有出色的相容性。它具有非常高的颜料粘合力。未着色的Acronal®ECO 9056涂膜可在室温下指干。Acronal®ECO 9056的涂膜透明、柔韧和高光，具有极高的耐水性和非常好的耐皂化性能 | |
| Acronal® Flex SC 138 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 良好分散的聚合物乳液，粘度低。与填料和颜料具有出色的相容性。它具有非常高的颜料粘合力。用Acronal®FLEX SC 138形成的涂膜具有出色的耐水、耐碱性能和耐候性。Acronal®FLEX SC 138配制的弹性墙面涂料即使在温暖高污染的环境下也具有良好的耐毛细裂纹以及非常好的耐玷污性能 | |
| Acronal® GS 409 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是一种低粘度细小粒径聚合物乳液。它与填料和颜料具有优异的相容性，同时具有极高的颜料粘结力。由Acronal GS 409 ap形成的漆膜具有优异的耐水性、耐碱性和耐候性。采用Acronal GS 409 ap配制的弹性涂料能能够提供毛细裂纹的桥接，即使在温暖和污染的环境中，也具有非常出色的耐沾污性。 | |
| Acronal® IA734 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® IA734 ap是一种直链丙烯酸阴离子乳液聚合物，专门设计用于顶级户外应用。聚合物细而窄的粒径分布确保了良好的附着力。交联作用使它获得最好的机械性能而无需牺牲耐沾污性。它不含增塑剂和溶剂 | |
| Acronal® JC 7043 X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是一种拥有细小粒径和低粘度的阴离子R-C乳液。它是一 种长链的丙烯酸和苯乙烯共聚物，具备优异的对粉化基材的渗透性和优异的耐碱性，适用于水性渗透性和耐碱性底漆，该底漆可替代溶剂型体系。该产品对粉化砖石基材具有优异的粘结力。 Acronal® JC 7043 适用于制备全效合一水性底漆产品。 | |
| Acronal® LR8977 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 安固力® LR8977是一种自交联丙烯酸乳液，用于工业金属防护涂料。很好的抗压粘性。适用高PVC配方。不含APEO，与防锈颜料相容性好，具有优异的金属防护性能 | |
| Acronal® NX 3587 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® NX 3587是一种水性丙烯酸乳液，用于弹性屋顶涂料。它是一种BASF新设计的聚合物，解决了弹性屋顶涂料工业的许多顾虑。首先，它是一种含可交联官能团的纯丙烯酸聚合物，这不仅仅提高的聚合物的抗张强度，而且改善了基材的附着力尤其是在聚氨酯上。其次，Acronal® NX 3587解决了当作为白色涂料遮盖沥青基材时的耐沥青渗出问题。根据紫外和热(50°C) 条件下的测试，它显示几乎没有沥青渗出。最后，当该产品复合到典型的42 PVC弹性屋顶涂料配方中时，它显示了非常低的吸水值 | |
| Acronal® PA 510 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 是一种阴离子型的分散介质的粘度。该乳液具有非常细的颗粒，提供优良的增稠响应。 ACRONAL®PA510配方的高光泽涂料耐高挡。 ACRONAL®PA510具有优异的湿附着力对木材和任何关键基材，尤其是老化醇酸的基材. | |
| Acronal® PA 619 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal®PA 619 ap为水性丙烯酸乳液，用于改性水硬性胶黏剂。它被推荐用于砂浆修补或喷涂应用。本产品所配制的混合物在高温下或多种类型水泥时均表现出优异的开罐可使用时间，夹带空气少，它可提供卓越的冷冻/解冻稳定性。 ACRONAL®PA 619 ap也建议用于水泥基瓷砖薄集胶粘剂，改性砂浆和水泥修复系统。相比未改性砂浆混合物，使用本产品改性的砂浆混合物具有更好的抗弯，抗拉强度和耐水渗透性。 | |
| Acronal® PA 807 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 乳液聚合物，耐久、低粘灰，用于高品质户外乳胶漆。Acronal® PA 807 ap是一种阴离子乳液聚合物，粘度中等，含有细小、良好分散的颗粒。它是一种全丙烯酸共聚物具有出色的户外耐久性和良好的耐玷污性能。该聚合物制备的涂膜具有良好的耐擦洗性能，防粘连性能，良好的对圬工表面的附着力以及特别好的湿遮盖力。Acronal® PA 807 ap适合用于制备各种应用的油漆，可配制不同光泽水平。 | |
| Acronal® PLUS 7045 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 低环境影响型抗菌内墙涂料用聚合物乳液 Acronal® PLUS 7045 是一种低气味、非渗出型抗菌涂料用乳液。Acronal® PLUS 7045 使用了特殊的聚合物载体，将银离子牢牢锁住，从而使其既具有优异的抗菌性能，又不会渗出衰减，同时不会导致涂料变灰。该乳液干燥后可以形成透明的高光涂膜，具有优异的耐水性及抗风化性能 | |
| Acronal® PLUS 7048 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PLUS 7048是一种无气味的阴离子乳液聚合物，可提供去甲醛功能，适用于户内墙面涂料。它含特殊单体可帮助捕获室内房间里的游离甲醛。从它制备的涂膜清澈高光，具有出色的耐水和耐风化性能 | |
| Acronal® PLUS 7048G | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PLUS 7048G 是一种用于内墙抗甲醛涂料的低气味聚 合物乳液。Acronal® PLUS 7048G 采用了特殊的功能性单体，它能够帮助捕获室内空气中的游离甲醛。该乳液干燥后可以形成 透明的高光涂膜，具有优异的耐水性及抗风化性能。 | |
| Acronal® PRO80 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 安固力® PRO80 是一种不含APEO，不含锌的丙烯酸乳液。具有非常好的防护性能和对湿热的屏蔽性。早期耐水性好，对各种颜填料的润湿性好。推荐用于金属底漆，中涂或面漆 | |
| Acronal® PS 608 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal®PS608 ap为水性丙烯酸乳液，用于水硬性胶结剂的改性。它用来改性水硬性胶结剂，尤其是含有水泥的混合物。用本产品改性的化合物具有非常好的流体均一性，允许大大减少用水量，而不改变最终产品的性能。可看到弯曲强度显著增加。 ACRONAL®PS608 ap推荐用于制造修补砂浆，工业地坪找平，finescreeds，以及水泥基自流平化合物。 | |
| Acronal® PS 673 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal®PS 673 ap为阴离子乳液聚合物，具有中等粘度。它含有小而细碎的颗粒。它与颜料和填料的相容性非常好，而且对颜料具有很高的粘结力。通过加入Acronal®PS 673 ap形成的膜是透明的，柔韧的，有光泽的，它们具有极高的防水性，并且具有非常好的耐皂化性能。本产品的未着色膜可在室温下表干。 | |
| Acronal® PS 707 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 阴离子乳液聚合物，具有中等粘度。它含有细小良好溶解的无机盐。它的未着色涂膜光亮、透明、柔韧，具有耐水性和耐皂化性能 | |
| Acronal® PS 713 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | ACRONAL®PS 713 ap是一种水性丙烯酸乳液，适合高品质胶黏水泥应用。它是一种高度通用的水性丙烯酸乳液，适合于不同的防水应用，并且对各种表面具有很高的附着力。它是一个功能强大的产品，它可提供高颜料粘合力，并具有高剪切力下非常好的稳定性。它可以被添加到研磨料中配制非常高固含量的涂料，制备厚膜。 ACRONAL®PS 713 ap被广泛应用于建筑行业，尤其是胶黏水泥防水。 | |
| Acronal® PS 715 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal®PS 715 ap为水性丙烯酸乳液，用于胶黏水泥和抗碳化涂层。它是高性能胶黏水泥防水膜用的合适基料。由于它的弹性和优良的抗裂-桥接性能，它赋予了建筑物长期耐久性。基于此产品的胶黏水泥防水膜对各种基材具有良好的附着力和非常好的耐玷污性能。它可理想地用于外墙防水应用，以保护建筑物，防止漏水和来自天气的影响。 | |
| Acronal® PS 719 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal®PS 719 ap是一种阴离子型乳液聚合物，粘度中等。它含有细小的良好分散的颗粒。它与颜料和填料具有出色的相容性。它具有非常高的颜料粘合力。未着色的Acronal®PS 719涂膜可在室温下指干。Acronal®PS 719的涂膜透明、柔韧和高光，具有极高的耐水性和非常好的耐皂化性能 | |
| Acronal® PS 791 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 乳液聚合物，用于高品质通用型建筑涂料，Acronal® PS 791 ap是一种阴离子乳液聚合物，粘度低，含有细小、良好分散的颗粒。它具有与颜填料出色的相容性和非常高的颜料粘合力。未着色的Acronal® PS 791 ap涂膜可在室温下指干。Acronal® PS 791 ap形成的涂膜透明、柔韧、光泽高，具有极高的耐水性，和非常好的耐皂化性能 | |
| Acronal® S 400 F ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | ACRONAL®S400 F ap是一种水性丙烯酸乳液，用于弹性防水膜。水泥防水膜在耐久、高品质的建设项目中发挥重要作用。它是一种水性丙烯酸乳液，可为水泥防水膜提供出色的防水性和优异的抗裂缝-桥接性能。它不含有氨或甲醛，可增加您工作场所的健康和安全。 | |
| Acronal® S 727 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal®S 727是疏水性共聚物基料，它含有活性化合物来阻止和锁定单宁和尼古丁。它创建了一个无粘性，弹性而耐用的膜。它可为热带木头和木节着色剂提供耐水性和出色的单宁阻隔性能。它不含任何配方中需要的附加氧化锌或替代活性化合物。本产品是单宁和尼古丁阻隔底漆，装饰和工业应用应用，它普遍适用于透明，特别是有色体系。 | |
| Acronal® Xpress 7512 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | ACRONAL®Xpress AP 7512 ap是一种水性丙烯酸乳液，用于配制超快速固化胶黏水泥防水膜。它是快速固化技术单组分胶黏水泥防水膜界的“行业标杆”。它专门设计用于在高潮湿的气候条件下的快速重涂。巴斯夫的最新防水聚合物利用多种创新的表面特征和独特的成分组合，可实现低吸水率，出色的耐起泡性，高颜料粘合能力。 | |
| Basonat® HB 100 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HB 100是一种脂肪族聚异氰酸酯，用于制备耐光和耐候性双组分聚氨酯涂料。它由基于六亚甲基二异氰酸酯的多异氰酸酯缩二脲组成。Basonat® HB 100可用于配制涂料。而其它Basonat®HB系列产品所含的溶剂证明用于涂料是麻烦的，比如芳族烃过度增溶聚苯乙烯。 | |
| Basonat® HB 175 MP/X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 75%溶于丙二醇单甲醚醋酸酯和二甲苯（1：1）的缩二脲改性HDI聚异氰酸酯，适用于高耐候性和高性能的双组分聚氨酯涂料 | |
| Basonat® HB 175 MP/X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 75%溶于丙二醇单甲醚醋酸酯和二甲苯（1：1）的缩二脲改性HDI聚异氰酸酯，适用于高耐候性和高性能的双组分聚氨酯涂料 | |
| Basonat® HB 275 B | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HB 275 B是脂肪族聚异氰酸酯，用于制备耐光和耐候性双组分聚氨酯涂料。它由基于六亚甲基二异氰酸酯的多异氰酸酯缩二脲组成，供应方式为75％固体，溶于25％的醋酸丁酯中，以应对无苯的工作环境。本品用于配制高耐光和耐候性的涂料。脂肪族多异氰酸酯有时甚至用在底漆中，用于难以附着的基材，例如铝或各种塑料，或复合材料涂布。 | |
| Basonat® HB 475 B/X | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HB 475 B/X是脂肪族聚异氰酸酯，用于制备耐光和耐候性双组分聚氨酯涂料。它由基于六亚甲基二异氰酸酯的多异氰酸酯缩二脲组成，供应方式为约75％固体，溶于1:1混合的醋酸丁酯和二甲苯中。本品用于配制高耐光和耐候性的涂料。脂肪族多异氰酸酯有时甚至用在底漆中，用于难以附着的基材，例如铝或各种塑料，或复合材料涂布。 | |
| Basonat® HI 100 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 无溶剂，异氰脲酸酯改性HDI聚异氰酸酯，适用于高耐候性和高性能的双组分聚氨酯涂料 | |
| Basonat® HI 100AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 无溶剂，异氰脲酸酯改性HDI聚异氰酸酯，适用于高耐候性和高性能的双组分聚氨酯涂料，相对BASONAT® HI 100 储存更稳定 | |
| Basonat® HI 190 B/S | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 90%溶于醋酸丁酯和 Solvesso®（1：1）的异氰脲酸酯改性HDI聚异氰酸酯，适用于高耐候性和高性能的双组分聚氨酯涂料 | |
| Basonat® HI 190 B/S AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 90%溶于醋酸丁酯和 Solvesso®（1：1）的异氰脲酸酯改性HDI聚异氰酸酯，适用于高耐候性和高性能的双组分聚氨酯涂料，相对BASONAT® HI 190 B/S储存更稳定 | |
| Basonat® HI2000 (old name : LR 9046) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 无溶剂，低粘度的异氰脲酸酯改性HDI聚异氰酸酯，适用于高固含，低有机挥发物，高耐候性和高性能的双组分聚氨酯涂料 | |
| Basonat® HW 1180 PC (old name : HW 180 PC) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 巴速耐® HW180PC是一种可水乳化的HDI类型的聚异氰酸酯，可与含活性羟基的聚合物乳液交联。推荐用于双组分工业涂料 | |
| Basonat® HW 2000 (old name : LR9056) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | 巴速耐® LR9056 是一种可水乳化的HDI类型的聚异氰酸酯，可与含活性羟基的聚合物乳液交联。推荐用于双组分工业涂料 | |
| Basonat® HW 3180 B (old name : LR 9080) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® 3180 B是基于异氰酸酯六亚甲基二异氰酸酯和异佛尔酮二异氰酸酯的可水稀释的多功能异氰酸酯，80％的乙酸正丁酯溶液。它用作助固化剂，结合亲水HDI基聚异氰酸酯，制备水性双组分聚氨酯涂料。 | |
| Basonol® HPE 1170 B | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonol® HPE 1170 B is a OH functional hyperbranched Polyester to be used as a cobinder in 2K PUR and 1K clear- and pigmented coating 2K systems for improved performance. | |
| BRB Siloen® SMA 285 | BRB International BV | BRB Siloen® SMA 285 is a 30% active emulsion of a high molecular weight silicone urethane resin. It can be used as a silicone additive for water-based coatings. | |
| BRB Siloen® SR 385 FD | BRB International BV | BRB Siloen® SR 385 FD is a medium hardness Methyl-Phenyl resin supplied at 50 % solid in Xilene, designed to produce non-stick coating materials in contact with foodstuff. It can be used in non-sticking bakery pans for bread, rusks, biscuits, cakes, etc.,...展开 BRB Siloen® SR 385 FD is a medium hardness Methyl-Phenyl resin supplied at 50 % solid in Xilene, designed to produce non-stick coating materials in contact with foodstuff. It can be used in non-sticking bakery pans for bread, rusks, biscuits, cakes, etc., as well as non-stick coatings for toaster, grills, BBQs, etc. 收起 | |
| BRB Siloen® TA 394 | BRB International BV | BRB Siloen® TA 394 is a solvent based high molecular weight polydimethylsiloxane formulation, designed as a hammertone finish additive. It provides a hammertone finish effect to paints and coatings. | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 |
