| 1257 Superfast Yellow 10G | Shanghai Honor Industrial Co., LTD | 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起 | |
| 1260 SuperFast Yellow RNG | Shanghai Honor Industrial Co., LTD | 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。 | |
| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| BAL 101 H WS-70 | Bonyan Kala Chemie Co. | BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and g...展开 BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 101 L WS-70 | Bonyan Kala Chemie Co. | BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and ...展开 BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 102 WS-70 | Bonyan Kala Chemie Co. | BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in...展开 BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in architectural and industrial varnishes. 收起 | |
| BAL 103 WS-70 | Bonyan Kala Chemie Co. | BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood...展开 BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 104 WS-70 | Bonyan Kala Chemie Co. | BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-c...展开 BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-corrosion and anti-rust primers. 收起 | |
| BAL 106 H WS-70 | Bonyan Kala Chemie Co. | BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural,...展开 BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 106 L WS-70 | Bonyan Kala Chemie Co. | BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal...展开 BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, spray paints, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 108 WS-70 | Bonyan Kala Chemie Co. | BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood...展开 BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 116 WS-70 | Bonyan Kala Chemie Co. | BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood,...展开 BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 118 WS-70 | Bonyan Kala Chemie Co. | BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coa...展开 BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 120 WS-70 | Bonyan Kala Chemie Co. | BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coating...展开 BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...展开 BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. 收起 | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...展开 BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. 收起 | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...展开 BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 收起 | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...展开 BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. 收起 | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...展开 BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. 收起 | |
| BAS 302 X-60 | Bonyan Kala Chemie Co. | BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...展开 BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. 收起 | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...展开 BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 收起 | |
| BAS 307 X-60 | Bonyan Kala Chemie Co. | BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...展开 BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. 收起 | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...展开 BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...展开 BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...展开 BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...展开 BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BD-Ca-5 | Bonyan Kala Chemie Co. | BD-Ca-5 is a drier that appears as a clear yellow liquid. This product is an auxiliary drier and has a metal content of 5±0.2. It is often used for air through and surface drying systems. | |
| BD-Co-10 | Bonyan Kala Chemie Co. | BD-Co-10 is a drier that appears as a violet liquid. This product is an active oxidation drier and has a metal content of 10±0.2. It is often used as an accelerator for unsaturated polyester resins and in air drying systems. | |
| BD-Pb-32 | Bonyan Kala Chemie Co. | BD-Pb-32 is a drier that appears as a clear yellow liquid. This product is a through drier and has a metal content of 32±0.5. It is often used for air through and surface drying systems. | |
| BD-Zr-18 | Bonyan Kala Chemie Co. | BD-Zr-18 is a drier that appears as a light yellow liquid. This product is a through drier and has a metal content of 18±0.3. It is often used in air drying systems, metallic paints, metallic varnishes and coatings. | |
| BUP 612 | Bonyan Kala Chemie Co. | BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a ...展开 BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 550-750CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 615 | Bonyan Kala Chemie Co. | BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in ...展开 BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 620 | Bonyan Kala Chemie Co. | BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a visc...展开 BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 400-650CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 621 | Bonyan Kala Chemie Co. | BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity...展开 BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 623 | Bonyan Kala Chemie Co. | BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a v...展开 BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a viscosity of 500-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 624 | Bonyan Kala Chemie Co. | BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP ...展开 BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 625 | Bonyan Kala Chemie Co. | BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly use...展开 BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 626 | Bonyan Kala Chemie Co. | BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of ...展开 BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 450-650CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 629 | Bonyan Kala Chemie Co. | BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...展开 BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 630 | Bonyan Kala Chemie Co. | BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...展开 BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 631 | Bonyan Kala Chemie Co. | BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product ha...展开 BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 640 | Bonyan Kala Chemie Co. | BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C a...展开 BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 643 | Bonyan Kala Chemie Co. | BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and...展开 BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 660 | Bonyan Kala Chemie Co. | BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 600-900CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 665 | Bonyan Kala Chemie Co. | BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 800-1200CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 690 | Bonyan Kala Chemie Co. | BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and ...展开 BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and is commonly used in general purpose applications. 收起 | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 |
