UL Prospector

成功!

成功保存搜索结果
1,4-Butanediol (1,4-BDO) DCC (Dairen Chemical Corp.) 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起
1257 Superfast Yellow 10G Shanghai Honor Industrial Co., LTD 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起
1260 SuperFast Yellow RNG Shanghai Honor Industrial Co., LTD 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。
2-Methyl-1,3-Propanediol DCC (Dairen Chemical Corp.) 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起
Alkoxylated 2-Methyl-1,3-Propanediol DCC (Dairen Chemical Corp.) Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起
DA-100 DCC (Dairen Chemical Corp.) DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-100L DCC (Dairen Chemical Corp.) DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-101 DCC (Dairen Chemical Corp.) DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-102 DCC (Dairen Chemical Corp.) DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-102H DCC (Dairen Chemical Corp.) DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-103 DCC (Dairen Chemical Corp.) DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-103H DCC (Dairen Chemical Corp.) DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-104 DCC (Dairen Chemical Corp.) DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-107 DCC (Dairen Chemical Corp.) DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-1100 DCC (Dairen Chemical Corp.) DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起
DA-111 DCC (Dairen Chemical Corp.) DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-1120 DCC (Dairen Chemical Corp.) DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起
DA-1122 DCC (Dairen Chemical Corp.) DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起
DA-1126 DCC (Dairen Chemical Corp.) DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起
DA-1130 DCC (Dairen Chemical Corp.) DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起
DA-1133 DCC (Dairen Chemical Corp.) DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起
DA-117 DCC (Dairen Chemical Corp.) DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起
DA-1200 DCC (Dairen Chemical Corp.) DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起
DA-1210 DCC (Dairen Chemical Corp.) DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起
DA-125 DCC (Dairen Chemical Corp.) DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-128 DCC (Dairen Chemical Corp.) DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-128H DCC (Dairen Chemical Corp.) DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-1400 DCC (Dairen Chemical Corp.) DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起
DA-1410 DCC (Dairen Chemical Corp.) DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起
DA-1420 DCC (Dairen Chemical Corp.) DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起
DA-1430 DCC (Dairen Chemical Corp.) DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起
DA-1450 DCC (Dairen Chemical Corp.) DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起
DA-179 DCC (Dairen Chemical Corp.) DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起
DA-180L DCC (Dairen Chemical Corp.) DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起
DA-183 DCC (Dairen Chemical Corp.) DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起
DA-265 DCC (Dairen Chemical Corp.) DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起
DA-265H DCC (Dairen Chemical Corp.) DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起
DA-310 DCC (Dairen Chemical Corp.) DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起
DA-3510 DCC (Dairen Chemical Corp.) DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起
DA-371 DCC (Dairen Chemical Corp.) DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起
DA-500 DCC (Dairen Chemical Corp.) DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起
DA-502 DCC (Dairen Chemical Corp.) DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起
DA-511 DCC (Dairen Chemical Corp.) DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起
DA-523 DCC (Dairen Chemical Corp.) DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起
DA-524 DCC (Dairen Chemical Corp.) DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起
DA-6200 DCC (Dairen Chemical Corp.) DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起
DA-652 DCC (Dairen Chemical Corp.) DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起
DA-691 DCC (Dairen Chemical Corp.) DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起
DA-901 DCC (Dairen Chemical Corp.) DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起
DA-908 DCC (Dairen Chemical Corp.) DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起
DA-910 DCC (Dairen Chemical Corp.) DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起
DA-920 DCC (Dairen Chemical Corp.) DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起
DA-930 DCC (Dairen Chemical Corp.) DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起
EMULTROL DFM AFO-3 Concentrol, S.A., Productos EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial proce...展开 EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. 收起
EMULTROL DFM AFO-5 Concentrol, S.A., Productos EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This high...展开 EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This highly stable product is compatible with a wide range of chemical products over wide pH range. 收起
EMULTROL DFM AFO-6 Concentrol, S.A., Productos EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and indus...展开 EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH range. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. 收起
EMULTROL DFM AFO-7 Concentrol, S.A., Productos EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compati...展开 EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compatible with a wide range of chemical products over wide pH range. Its long term foam inhibition effect permits usage of low dosages. 收起
EMULTROL DFM CP-1 Concentrol, S.A., Productos EMULTROL DFM CP-1 is a highly stable silicone antifoam compound formulated to control foam creation in aqueous systems.
EMULTROL DFM CP-14 Concentrol, S.A., Productos EMULTROL DFM CP-14 is a silicone antifoam compound, mainly for a wide range of aqueous and nonaqueous industrial applications.
EMULTROL DFM CP-6 Concentrol, S.A., Productos EMULTROL DFM CP-6 is a silicone anti-foam compound, mainly for textile applications where a water dispersible anti-foam is needed.
EMULTROL DFM CP-8 Concentrol, S.A., Productos EMULTROL DFM CP-8 is a silicone anti-foam compound, mainly for kraft and sulfite process stock washing. Emulsifiable anti-foam concentrate which can be used in very small dosage compared with traditional oil-based anti-foams.
EMULTROL DFM DV-1 Concentrol, S.A., Productos EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfa...展开 EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfactants and textile auxiliaries. Control foams in the processes of dyeing, printing, bleaching, scouring, finishing and sizing. 收起
EMULTROL DFM DV-110 Concentrol, S.A., Productos EMULTROL DFM DV-110 antifoam has been formulated for use in general industrial processes in very low concentrations.
EMULTROL DFM DV-25 Concentrol, S.A., Productos EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming ...展开 EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起
EMULTROL DFM DV-8 P Concentrol, S.A., Productos EMULTROL DFM DV-8 P antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. The product has been specially formulated in order to cover the requirements in waste-water treatment plants.
EMULTROL DFM OL-4 Concentrol, S.A., Productos EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its lon...展开 EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起
EMULTROL DFM OL-9 Concentrol, S.A., Productos EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintai...展开 EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. EMULTROL DFM OL-9 should be added at a point of high agitation to ensure a good dispersion. The dosage of application is between 50 and 800 grams per ton of paper manufactured, depending on the grade and type of foam. 收起
EMULTROL DFM OLM-12 Concentrol, S.A., Productos EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH r...展开 EMULTROL DFM OLM-12 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Its main application is wastewater treatment. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起
EMULTROL DFM OLM-14 Concentrol, S.A., Productos EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foami...展开 EMULTROL DFM OLM-14 has been specially formulated for being used in industrial processes, especially in the control of foam in wastewater treatment plants. It is a low viscosity product, easy to handle and dispense. It has an excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. The product must be used directly without prior dilution. 收起
EMULTROL DFM OLM-15 Concentrol, S.A., Productos EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems....展开 EMULTROL DFM OLM-15 defoamer has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起
EMULTROL DFM OLM-17 Concentrol, S.A., Productos EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits ...展开 EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits usage of a single dose. 收起
EMULTROL DFM OLM-18 Concentrol, S.A., Productos EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with mos...展开 EMULTROL DFM OLM-18 is a mineral oil defoamer fore mulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. 收起
EMULTROL DFM OLM-20 Concentrol, S.A., Productos EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end p...展开 EMULTROL DFM OLM-20 is formulated with high purity white mineral oils which, unlike conventional mineral oils, have a neutral color and smell. This prevents the yellowing of the paint and the generation of odors. This product is recommended for high-end paints. 收起
EMULTROL DFM OLM-22 Concentrol, S.A., Productos EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Exc...展开 EMULTROL DFM OLM-22 is a white oil defoamer for water based dispersions, coatings and adhesives, also indicated for use during the production process of emulsions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. 收起
EMULTROL DFM OLV-52 Concentrol, S.A., Productos EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish ...展开 EMULTROL DFM OLV-52 has been specially formulated for being used in food products. The product is suitable for being used as defoaming agent in food processes such as washing potatoes, fruits and green vegetables; and cleaning of other foods such as fish and shellfish. It can be easily dispersed in foaming systems and it has long term foam inhibition effect. It should be used directly, used manually or with automatic dosage system. 收起
EMULTROL DFM OLV-54 Concentrol, S.A., Productos EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with m...展开 EMULTROL DFM OLV-54 is a vegetable oil defoamer for emulsion paints, coatings and adhesives, also indicated for use during the production process of emulsions. Excellent performance in acrylic and PVA dispersions. It is a stable product, compatible with most chemical products over a wide range of pH. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. 收起
EMULTROL DFM P-20 Concentrol, S.A., Productos EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical produc...展开 EMULTROL DFM P-20 antifoam has been specially formulated for controlling foam in biotechnology applications, ultrafiltration systems, fermentation, detergents, fertilizers and food processing. The product is stable and compatible with most chemical products in a wide pH range (1-14). It should be added to dry products to prevent foaming when liquids are added at the point of use. 收起
EMULTROL DFM PG-100 FR Concentrol, S.A., Productos EMULTROL DFM PG-100 FR is a silicone-free polymeric antifoam formulated to control the foam creation in aqueous systems.
EMULTROL DFM PG-100 PK Concentrol, S.A., Productos EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manual...展开 EMULTROL DFM PG-100 PK has been specially formulated for being used in aqueous applications from room temperature. The product is stable and compatible with most of the chemical products in a wide range of pH. The product can be used directly, used manually or with automatic dosage system. The product is suitable for use in food processes such as washing potatoes, fruits, green vegetables, seafood and drink packaging processes. It can also be used in other processes such as the processing of cellulose. 收起
EMULTROL DFM PGM-100 CB Concentrol, S.A., Productos EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stabl...展开 EMULTROL DFM PGM-100 CB defoamer has been specially formulated for the treatment of wastewater from slaughterhouses cleaning processes. Highly effective in the prevention and elimination of the foam caused by organic material, fats and blood. Highly stable product, compatible with a wide range of chemical products over wide pH range. 收起
EMULTROL DFM PGM-60 CV Concentrol, S.A., Productos EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a ...展开 EMULTROL DFM PG-60 CV defoamer has been specially formulated for the treatment of wastewater from cleaning processes with organic material (slaughterhouses). Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose. Highly stable product, compatible with a wide range of chemical products over wide pH range. 收起
HESS NCS-10 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-12 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-15 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-3 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-5 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-8 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
ORDISOL SWT-01 Concentrol, S.A., Productos ORDISOL SWT-01 is a silicone surfactant for application in aqueous systems. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems.
ORDISOL SWT-01 R Concentrol, S.A., Productos ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surf...展开 ORDISOL SWT-01 R is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure that promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-01 Rs low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 收起
ORDISOL SWT-03 Concentrol, S.A., Productos ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for ...展开 ORDISOL SWT-03 is a silicone additive. In aqueous systems, it provides good repaintability, low foaming, improves pore wetting in wood coatings and also improves leveling. ORDISOL SWT-03 can be used in a wide range of applications, including coatings for wood and furniture, and varnishes. 收起
ORDISOL SWT-04 Concentrol, S.A., Productos ORDISOL SWT-04 is a silicone based additive for waterborne formulations of finishing auxiliaries.
ORDISOL SWT-05 Concentrol, S.A., Productos ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides a...展开 ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides an additional anti-blocking effect. 收起
ORDISOL SWT-06 Concentrol, S.A., Productos ORDISOL SWT-06 is a silicone additive for use in the coatings industry. It is highly effective, compatible, and offers an improvement to scratch resistance.
ORDISOL SWT-07 Concentrol, S.A., Productos ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coat...展开 ORDISOL SWT-07 is a silicone surfactant for a wide variety of applications. It improves flow and leveling properties in solvent-based, solvent-free or water-based coatings systems. ORDISOL SWT-07 can be used in both transparent coatings and pigmented coating systems. 收起
ORDISOL SWT-10 Concentrol, S.A., Productos ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scra...展开 ORDISOL SWT-10 is a silicone surfactant that can be used in a wide range of applications. It improves flow and leveling properties in solvent based coatings systems, solventless systems and water soluble systems. ORDISOL SWT-10 also provides wear and scratch resistance. 收起
ORDISOL SWT-11 Concentrol, S.A., Productos ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfa...展开 ORDISOL SWT-11 is a silicone surfactant for application in aqueous systems with poor wetting. It has a special siloxane structure which promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-11s low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 收起
ORDISOL SWT-13 Concentrol, S.A., Productos ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Béna...展开 ORDISOL SWT-13 is a silicone surface additive with an average reduction of surface tension. It is solvent free and suitable for aqueous or solvent based systems. Improvement in slippage, leveling and gloss of the surface is obtained. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. It is recommended for use in all systems where solvent-free additives are required. 收起
ORDISOL SWT-13 XI Concentrol, S.A., Productos ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and ...展开 ORDISOL SWT-13 XI is a silicone surface additive with an average reduction of surface tension. It provides slippage, leveling and gloss of the surface. The formation of Bénard cells is avoided. This additive also improves the wetting of the substrate and provides antiblocking properties. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. ORDISOL SWT-13 XI is recommended for use in solvent systems. 收起
ORDISOL SWT-13-100 Concentrol, S.A., Productos ORDISOL SWT-13-100 is a silicone additive. It provides improved slippage, leveling, and anti-blocking properties. ORDISOL SWT-13-100 is recommended for use in all systems where solvent-free additives are required or special solvents are required.
ORDISOL SWT-14 Concentrol, S.A., Productos ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it d...展开 ORDISOL SWT-14 is a silicone surfactant for application in aqueous systems with poor wetting. The special siloxane structure promotes a "superwetting" effect, reducing surface tension in aqueous systems. As it is a non-ionic type silicone surfactant, it does not cause interference in anionic or cationic type emulsifying systems. Its low level of foaming enables the dosage of antifoam to be appreciably reduced in the aqueous system, a characteristic which is not achieved by the use of traditional humectants such as salts of the sulfosuccinates. 收起