| 1257 Superfast Yellow 10G | Shanghai Honor Industrial Co., LTD | 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起 | |
| 1260 SuperFast Yellow RNG | Shanghai Honor Industrial Co., LTD | 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。 | |
| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| ATA-125 | Zhejiang Chembest United Industrial Co., Ltd. | ATA-125 is an anatase titanium dioxide pigment. This product contains above 98% titanium dioxide. It can be used in indoor water-based paints, oil paints, and in the paper industry. | |
| ATR-312 | Zhejiang Chembest United Industrial Co., Ltd. | ATR-312 is a rutile titanium dioxide pigment. This product appears as a white powder that has been treated with aluminum and silicon compounds. It can be used in paints, coatings, printing inks, decorative materials, plastics, and in rubber applications...展开 ATR-312 is a rutile titanium dioxide pigment. This product appears as a white powder that has been treated with aluminum and silicon compounds. It can be used in paints, coatings, printing inks, decorative materials, plastics, and in rubber applications. 收起 | |
| Benzidine Yellow 10G | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow 10G, in the form of a greenish yellow powder, is a dye in the diazo chemical family. This product can be used in industrial paints and in plastic applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0. | |
| Benzidine Yellow 121H | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow 121H, in the form of a bright yellow powder, is a dye that can be used in polyamide inks, nitrocellulose inks, polypropylene inks, and in toluene-based inks. Its density is 1.5 and its pH value exists between 6.0 and 7.0. | |
| Benzidine Yellow DHG | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow DHG, in the form of a bright yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. | |
| Benzidine Yellow G | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow G, in the form of a transparent, reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its pH value...展开 Benzidine Yellow G, in the form of a transparent, reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. 收起 | |
| Benzidine Yellow G-A | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow G-A, in the form of a reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing and in plastic applications. Its density is 1.5 and its pH value exists betw...展开 Benzidine Yellow G-A, in the form of a reddish yellow powder, is a dye in the diazo chemical family. This product can be used in offset inks, water-based inks, textile printing and in plastic applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. 收起 | |
| Benzidine Yellow G-B | Zhejiang Chembest United Industrial Co., Ltd. | Benzidine Yellow G-B, in the form of a semi-transparent greenish yellow powder, is a dye in the diazo chemical family. This product can be sued in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its p...展开 Benzidine Yellow G-B, in the form of a semi-transparent greenish yellow powder, is a dye in the diazo chemical family. This product can be sued in offset inks, water-based inks, textile printing, and in plastic applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. 收起 | |
| Bronze Red C | Zhejiang Chembest United Industrial Co., Ltd. | Bronze Red C, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water based inks, offset inks, and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Bronze Red C-P | Zhejiang Chembest United Industrial Co., Ltd. | Bronze Red C-P, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in offset ink applications and in plastic. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Bronze Red C-S | Zhejiang Chembest United Industrial Co., Ltd. | Bronze Red C-S, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, offset inks, polyamide inks, and in polypropylene ink applications. Its density is 1.8 and its pH value exi...展开 Bronze Red C-S, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, offset inks, polyamide inks, and in polypropylene ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Bronze Red C-W | Zhejiang Chembest United Industrial Co., Ltd. | Bronze Red C-W, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Chrome Titanate Brown | Zhejiang Chembest United Industrial Co., Ltd. | Chrome Titanate Brown, in the form of a yellowish brown powder, is an inorganic dye. This product is non-toxic, weather-resistant, and acid-resistant. It can be used in heat-reflective coatings and inks. | |
| Cobalt Blue | Zhejiang Chembest United Industrial Co., Ltd. | Cobalt Blue, in the form of a blue powder, is an inorganic dye. This product is heat-resistant, acid-resistant, alkali-resistant, and non-toxic. It can be used in fluorocarbon coatings and heat-resistant coatings. | |
| Cobalt Green | Zhejiang Chembest United Industrial Co., Ltd. | Cobalt Green, in the form of a green powder, is an inorganic dye. This product is heat-resistant, acid resistant, alkali-resistant, and non-toxic. It can be used in fluorocarbon coatings and in heat-resistant coatings. | |
| Copper Chromite Black | Zhejiang Chembest United Industrial Co., Ltd. | Copper Chromite Black, in the form of a bluish-black powder, is an inorganic dye. This product is heat-resistant, alkali-resistant, and acid resistant. It can be used in heat-resistant coatings, coil coatings, and high-temperature glass inks. | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| Deep Chrome Yellow 805 | Zhejiang Chembest United Industrial Co., Ltd. | Deep Chrome Yellow 805, in the form of a yellow powder, is an inorganic dye. This product can be used in solvent-based paints, solvent-based inks, and in offset ink applications. Its pH value exists between 4.0 and 8.0. | |
| Fast Blue B | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue B, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and plastic applications. Its density is 1.8 and it...展开 Fast Blue B, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Blue BGNCF | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue BGNCF, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and plastic applications. Its density is 1.8 an...展开 Fast Blue BGNCF, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Blue BGS | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue BGS, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and in plastic applications. Its density is 1.8 a...展开 Fast Blue BGS, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing, and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Blue BS | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue BS, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, plastics, and in textile printing applications. Its density is 1.8 a...展开 Fast Blue BS, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, plastics, and in textile printing applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Blue Lake BO | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue Lake BO, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in offset inks and in water-based ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0. | |
| Fast Blue Toner | Zhejiang Chembest United Industrial Co., Ltd. | Fast Blue Toner, in the form of a bluish violet powder, is a dye in the triphenylmethane chemical family. This product can be used in offset inks and in water-based ink applications. Its density is 1.5 and its pH value exists between 7.0 and 8.0. | |
| Fast Green G | Zhejiang Chembest United Industrial Co., Ltd. | Fast Green G, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing applications, and in plastics. Its density is 1.8 a...展开 Fast Green G, in the form of a reddish blue powder, is a dye in the copper phthalocyanine chemical family. This product can be used in offset inks, water-based inks, industrial paints, textile printing applications, and in plastics. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Orange G | Zhejiang Chembest United Industrial Co., Ltd. | Fast Orange G, in the form of a reddish yellow powder, is a dye in the diazo chemical family. This product can be used in water-based inks, textile printing, offset inks, nitrocellulose inks, and in plastics. | |
| Fast Orange RL | Zhejiang Chembest United Industrial Co., Ltd. | Fast Orange RL, in the form of a reddish yellow powder, is a dye in the azo chemical family. This product can be used in water-based inks, textile printing, and in plastic applications. Its density is 1.6 and its pH value exists between 6.0 and 7.0. | |
| Fast Pink Lake | Zhejiang Chembest United Industrial Co., Ltd. | Fast Pink Lake, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in offset ink applications. Its density is 1.6 and its pH value exists between 6.5 and 7.5. | |
| Fast Pink Toner | Zhejiang Chembest United Industrial Co., Ltd. | Fast Pink Toner, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in offset ink applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. | |
| Fast Pink Toner NC | Zhejiang Chembest United Industrial Co., Ltd. | Fast Pink Toner NC, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in nitrocellulose inks, polyamide inks, and polypropylene ink applications. Its density is 1.5 and its pH value exists between 6.5...展开 Fast Pink Toner NC, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in nitrocellulose inks, polyamide inks, and polypropylene ink applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. 收起 | |
| Fast Pink Toner W | Zhejiang Chembest United Industrial Co., Ltd. | Fast Pink Toner W, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in water-based ink applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. | |
| Fast Red 2R | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red 2R, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in industrial paint applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. | |
| Fast Red BBC | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBC, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in industrial paints and plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red BBC-S | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBC-S, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, polyamide inks, and polypropylene ink applications. Its density is 1.8 and its pH value exists between 7.0 and...展开 Fast Red BBC-S, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in nitrocellulose inks, polyamide inks, and polypropylene ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. 收起 | |
| Fast Red BBM | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBM, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in industrial paint applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red BBN | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBN, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in offset inks and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red BBN-W | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBN-W, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red BBS | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBS, in the form of a red powder, is a dye in the mono azo chemical family. This product can be used in industrial paints and in plastic applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red BBS-W | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red BBS-W, in the form of a red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red F2R | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red F2R, in the appearance of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. | |
| Fast Red F3RK | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red F3RK, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based coatings, industrial paints, automotive paints, and in plastic applications. Its density is 1.5 and its pH value exis...展开 Fast Red F3RK, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based coatings, industrial paints, automotive paints, and in plastic applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. 收起 | |
| Fast Red F4R | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red F4R, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. | |
| Fast Red F5RK | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red F5RK, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in industrial paints, automotive paints, water-based coatings, and in plastic applications. Its density is 1.5 and its pH value exists ...展开 Fast Red F5RK, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in industrial paints, automotive paints, water-based coatings, and in plastic applications. Its density is 1.5 and its pH value exists between 6.5 and 7.5. 收起 | |
| Fast Red FBB | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red FBB, in the form of a bright red powder, is a dye in the mono azo chemical family. This product can be used in offset inks, water-based inks, plastic applications, and in textile printing. Its density is 1.6 and its pH value exists between 6.0 ...展开 Fast Red FBB, in the form of a bright red powder, is a dye in the mono azo chemical family. This product can be used in offset inks, water-based inks, plastic applications, and in textile printing. Its density is 1.6 and its pH value exists between 6.0 and 7.0. 收起 | |
| Fast Red FBL | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red FBL, in the form of a bluish red powder, is a dye in the mono azo chemical family. This product can be used in industrial paints and in automotive paint applications. Its density is 1.8 and its pH value exists between 7.0 and 8.0. | |
| Fast Red FGR | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red FGR, in the form of a bright red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks, textile printing, industrial paints, and air-drying paint applications. Its density is 1.5 and is pH value exists b...展开 Fast Red FGR, in the form of a bright red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks, textile printing, industrial paints, and air-drying paint applications. Its density is 1.5 and is pH value exists between 6.0 and 7.0. 收起 | |
| Fast Red N | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red N, in the form of a yellowish red powder, is a dye in the mono azo chemical family. This product can be used in water-based inks and in textile printing applications. Its density is 1.5 and its pH value exists between 6.0 and 7.0. | |
| Fast Red W | Zhejiang Chembest United Industrial Co., Ltd. | Fast Red W, in the form of a bluish red powder, is a dye in the xanthene chemical family. This product can be used in water-based inks and in offset ink applications. Its density is 1.6 and its pH value exists between 7.0 and 8.0. |
