| 1257 Superfast Yellow 10G | Shanghai Honor Industrial Co., LTD | 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起 | |
| 1260 SuperFast Yellow RNG | Shanghai Honor Industrial Co., LTD | 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。 | |
| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| Alusil® ET | PQ Corporation - PQ公司 | Alusil® ET是一种水合无定形合成铝硅酸钠。它是作为一种二氧化钛增量剂应用于乳胶漆中。ALUMINASOL™是一种细而轻的粉末，应注意避免吸入。操作中应带上面罩，如果排气通风应开启。这种材料既不会导致矽肺，也不属于急性毒性，但安全方面要求它存储在干燥的地方，并合理地操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| Gasil® 114 | PQ Corporation - PQ公司 | GASIL®114是一种合成的无定形二氧化硅。它被用作硅土消光剂用于卷钢和罐头涂料，辐射固化涂料，和高固含量的涂料系统中用于控制光泽。它也可以用于直链低密度聚乙烯膜中作为高效防粘连剂。 GASIL®114是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® 200DF | PQ Corporation - PQ公司 | GASIL® 200DF是一种合成的无定形二氧化硅。它具有良好的颗粒尺寸控制，可用于制备平滑的绘制涂料。它提供了出色的'齿'，用于增加铅笔接受度，高耐腐蚀剂抛光性和耐重影性，适用于对金属打标。它也被用作照相纸的背面涂料，用于增加铅笔和吸墨接受度和铝涂料中的水清除性。GASIL® 200DF是一种细而轻的粉末。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® 23D (Industrial Use) | PQ Corporation - PQ公司 | GASIL® 23D是一种合成的无定形二氧化硅。它可以作为消光剂用于印刷油墨、罩印清漆、皮革和木器涂料。它也可以作为增稠剂、粘度调节剂和抗粘连剂，用于高透度聚丙烯和聚氯乙烯薄膜。GASIL® 23D是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® 23F | PQ Corporation - PQ公司 | GASIL® 23F是一种合成的无定形二氧化硅。它可作为通用型微粉化二氧化硅用于消光水性体系，包括皮革涂饰剂、增稠剂、承载和抗结块。它也可以作为油墨吸附颜料用于喷墨油墨。 GASIL® 23F是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® 35M W | PQ Corporation - PQ公司 | Gasil® 35M W is a synthetic amorphous silica. It is used as a general purpose silica matting agent which finds wide acceptance in the matting of inks, paints, paper coatings, matting and 'tooth' of sensitized papers, and drafting film. It is also used as ...展开 Gasil® 35M W is a synthetic amorphous silica. It is used as a general purpose silica matting agent which finds wide acceptance in the matting of inks, paints, paper coatings, matting and 'tooth' of sensitized papers, and drafting film. It is also used as an anti-plate-out additive for calendered PVC and as an ink adsorbing pigment for inkjet. Gasil® 35M W is a fine, light powder and care should be taken to avoid inhaling it. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. 收起 | Request Sample |
| Gasil® 937 | PQ Corporation - PQ公司 | GASIL ® 937是一种合成的无定形二氧化硅。它可作为一种通用型消光剂，可理想的用于高浓度消光膏。它广泛适用于工业和装饰木器涂料和金属涂料。GASIL® 937是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® EBN | PQ Corporation - PQ公司 | GASIL ® EBN是一种合成无定形二氧化硅。它是专为辐射固化涂料、塑料溶胶和高膜厚涂料设计的消光粉。GASIL® EBN是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® GM2 | PQ Corporation - PQ公司 | GASIL ® GM2是一种合成无定形二氧化硅。它经特别设计，结合了消光剂和抗结块剂功能，可用于粉末涂料。其结构和颗粒大小使它非常适合于承受混合/干混带来的机械破坏力，流变流出的影响最小。它被用作抛光助剂，但是，它也适合于食品应用。 GASIL® GM2是一种细而轻的粉末。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP210 | PQ Corporation - PQ公司 | GASIL ® HP210是一种合成的无定形二氧化硅。这是一个高效的蜡处理消光剂，可搅拌加入。本产品的中等粒径意味着它是一个非常通用的消光剂适合许多表面涂料。GASIL® HP210是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP220 | PQ Corporation - PQ公司 | Gasil® HP220 is a synthetic amorphous silica. It is a high efficiency, easy dispersible matting agent with controlled particle size. It is suitable for matting of both clear and pigmented coatings including wood finishes, alkyd paints and varnishes, and c...展开 Gasil® HP220 is a synthetic amorphous silica. It is a high efficiency, easy dispersible matting agent with controlled particle size. It is suitable for matting of both clear and pigmented coatings including wood finishes, alkyd paints and varnishes, and coil and can coatings. Gasil® HP220 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. 收起 | Request Sample |
| Gasil® HP230 | PQ Corporation - PQ公司 | GASIL ® HP230是一种合成的无定形二氧化硅。它作为消光剂用于薄涂工业涂料、油墨和高透明度的水性涂料。 GASIL® HP230是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP240 | PQ Corporation - PQ公司 | GASIL ® HP240是一种合成的无定形二氧化硅。它是一种通用型消光剂，适用于光滑木器漆、卷材和罐头涂料，以及辐射固化体系。GASIL® HP240是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP255 | PQ Corporation - PQ公司 | GASIL ® HP255是一种合成的无定形二氧化硅。本产品粒径小，具有高消光效率，适合硅涂卷材涂料和油墨配方。GASIL® HP255是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP260 | PQ Corporation - PQ公司 | GASIL ® HP260是一种合成的无定形二氧化硅。本品是一种高效，通用的，易分散的消光剂。它适用于多种溶剂型体系，包括金属涂料、木器漆和织物涂料。GASIL® HP260是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP270 | PQ Corporation - PQ公司 | GASIL ® HP270是一种合成的无定形二氧化硅。本品是一种高效，易分散的消光剂，具有良好的粒度控制。它适合用于高固含体系，以及卷材和罐头涂料。它也可以用来作为油墨吸附颜料用于喷墨涂层。GASIL® HP270是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP280 | PQ Corporation - PQ公司 | GASIL ® HP280是一种合成的无定形二氧化硅。本品是一种高效，易分散的消光剂，它提供了一个低光泽比。它适合用于高固含和酸催化的卷材体系的消光。它也可以作为油墨吸附颜料用于喷墨涂层。GASIL® HP280是一种细而轻的粉末，应注意避免吸入。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP290 | PQ Corporation - PQ公司 | GASIL ® HP290是一种合成的无定形二氧化硅。它是一种高效，易分散的消光剂，它提供了一个低光泽比。它适合用于高固含和酸催化的卷材体系的消光。它也可以作为油墨吸附颜料的喷墨涂层。GASIL® HP290是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP335 | PQ Corporation - PQ公司 | Gasil® HP335 features a small particle size that is carefully controlled combined with a high internal pore volume. In addition Gasil® HP335 has high purity and specially designed organic surface treatment that makes it the product of choice for many appl...展开 Gasil® HP335 features a small particle size that is carefully controlled combined with a high internal pore volume. In addition Gasil® HP335 has high purity and specially designed organic surface treatment that makes it the product of choice for many applications. 收起 | Request Sample |
| Gasil® HP33C | PQ Corporation - PQ公司 | Gasil® HP33C features a very small particle size that is carefully controlled combined with a high internal pore volume and high purity. Gasil® HP33C with its high matting efficiency and transparency is the product of choice for the formulation of inks an...展开 Gasil® HP33C features a very small particle size that is carefully controlled combined with a high internal pore volume and high purity. Gasil® HP33C with its high matting efficiency and transparency is the product of choice for the formulation of inks and overprint varnishes. 收起 | Request Sample |
| Gasil® HP340M | PQ Corporation - PQ公司 | GASIL ® HP340M是一种合成的无定形二氧化硅。本品是一种高效的蜡处理消光剂，具有优良的分散性和悬浮性能。虽然它在工业木器涂料中特别适用，它也是一个非常好的通用型消光剂。 GASIL® HP340M是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP380 | PQ Corporation - PQ公司 | Gasil® HP380是一种人工合成的非定晶硅。它在标准（紫外线，高固体含量，水基）涂料中作为经处理氧化硅的消光剂。它主要的特点包括消光率高，透明且具有耐磨性。 | Request Sample |
| Gasil® HP39 | PQ Corporation - PQ公司 | GASIL ® HP39是一种合成的无定形二氧化硅。它是一个大粒径的消光剂，设计用于无溶剂辐射固化涂料、高固含系统以及厚膜涂料。它也可以作为油墨吸附颜料用于喷墨涂层。 GASIL® HP39是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP395 | PQ Corporation - PQ公司 | GASIL ® HP395是一种合成的无定形二氧化硅。本产品是一种容易润湿/分散的大粒径的消光剂，可用于水性和溶剂型体系。它是作为壁纸超级涂料、屋顶瓦乳液涂料、百叶窗涂料的消光。它也被用于乳胶漆的光泽控制，作为一种有效的防滑剂，用于涂料，以及作为墨水吸附颜料用于喷墨涂层。GASIL® HP395既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP560 | PQ Corporation - PQ公司 | GASIL ® HP560是一种合成的无定形二氧化硅。本品适合用于木器涂料，提供高消光效率和出色的透明性和分散性。GASIL® HP560是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP576 | PQ Corporation - PQ公司 | Gasil® HP576 is a very high efficiency wax treated silica matting agent for UV curable coatings. | Request Sample |
| Gasil® HP710 | PQ Corporation - PQ公司 | Gasil® HP710 is a synthetic amorphous silica. It can be used as a matting agent suitable for high solids and waterborne coatings with excellent performances in 100% UV curable formulations. | Request Sample |
| Gasil® HP860 | PQ Corporation - PQ公司 | GASIL ® HP860是一种合成的无定形二氧化硅。本品适合用于光滑的木器漆消光。它具有出色的手感和分散性。其有机处理极其耐溶剂剥离。 GASIL® HP860是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HP880 | PQ Corporation - PQ公司 | GASIL ® HP880是一种合成的无定形二氧化硅。它是一种高效，易分散的消光剂，具有良好的粒度控制。它同时适用于清漆和色漆，包括装饰涂料、木器漆，以及卷材和罐头涂料。用于100％固含UV固化涂料也具有良好的性能。 GASIL® HP880是一种细而轻的粉末，应注意避免吸入。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® HS104 | PQ Corporation - PQ公司 | Gasil® HS104 is a synthetic amorphous silica. This fine particle size silica is used as a matting agent for leather finishes, as well as a high-efficiency matting agent for water-based and solvent-based wood lacquers. Gasil® HS104 combines excellent weigh...展开 Gasil® HS104 is a synthetic amorphous silica. This fine particle size silica is used as a matting agent for leather finishes, as well as a high-efficiency matting agent for water-based and solvent-based wood lacquers. Gasil® HS104 combines excellent weight effectiveness with good dispersibility in most applications. 收起 | Request Sample |
| Gasil® HS106 | PQ Corporation - PQ公司 | Gasil® HS106 is a synthetic amorphous silica. It is a general purpose silica matting agent for use in industrial coatings, and is highly efficient in coil coatings and wood lacquers. Gasil® HS106 combines excellent weight effectiveness with good dispersib...展开 Gasil® HS106 is a synthetic amorphous silica. It is a general purpose silica matting agent for use in industrial coatings, and is highly efficient in coil coatings and wood lacquers. Gasil® HS106 combines excellent weight effectiveness with good dispersibility in most applications. 收起 | Request Sample |
| Gasil® HS110 | PQ Corporation - PQ公司 | Gasil® HS110 is a synthetic amorphous silica product. It is a high efficiency silica matting agent for use in decorative paints, general industrial coatings, and coil coatings. | Request Sample |
| Gasil® HY500 | PQ Corporation - PQ公司 | Gasil® HY500 is a fine particle size silica matting agent for use in Industrial Coatings. High Efficiency in Waterborne formulations. | Request Sample |
| Gasil® HY600 | PQ Corporation - PQ公司 | Gasil® HY600 is a silica matting agent for use in Industrial Coatings. High Efficiency in Waterborne formulations. | Request Sample |
| Gasil® IJ37 | PQ Corporation - PQ公司 | Gasil® IJ37是一种有机处理的硅胶，在水基木地板和辐射固化涂料中用作有效的消光剂。它提供出色的消光效率，并将对透明度和力学薄膜性质的影响最小化。 | Request Sample |
| Gasil® P-10W | PQ Corporation - PQ公司 | GASIL ®P -10W是一种合成的无定形二氧化硅。它是一种大粒度的消光剂，设计用于水性漆。它也可以作为油墨吸附颜料用于喷墨涂层。 GASIL® P- 10W是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® P-28 | PQ Corporation - PQ公司 | Gasil® P-28 is a synthetic amorphous silica. It is used as a synthetic silica for use in coatings for thermal paper. Gasil® P-28 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust v...展开 Gasil® P-28 is a synthetic amorphous silica. It is used as a synthetic silica for use in coatings for thermal paper. Gasil® P-28 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. 收起 | Request Sample |
| Gasil® UV55C | PQ Corporation - PQ公司 | GASIL ® UV55C是一种合成的无定形二氧化硅。本品是一种消光剂，可用于UV固化涂料。它广泛适用于UV固化木器涂料、包装涂料和工业涂料。它可理想的应用于需要低粘度的场合。GASIL® UV55C是一种细而轻的粉末，应注意避免吸入。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® UV70C | PQ Corporation - PQ公司 | GASIL ® UV70C是一种合成的无定形二氧化硅。这是一个高效蜡处理消光剂。中等粒径，表面经处理，易于分散，可通用于UV固化体系。GASIL® UV70C是一种细而轻的粉末，应注意避免吸入。操作时应带上面罩，并采用排气通风装置。该材料既不会导致矽肺，也不属于急性毒性，但安全方面需要合理操作，以尽量减少产生灰尘和累积静电。 | Request Sample |
| Gasil® WP100 | PQ Corporation - PQ公司 | Gasil® WP100 is a high performance Silica Hydrogel designed to provide increased scrub and burnishing resistance in water based paints. Gasil® WP100 - helps to increase water resistance of latex and silicate coatings. Also used to increase the ratio in Al...展开 Gasil® WP100 is a high performance Silica Hydrogel designed to provide increased scrub and burnishing resistance in water based paints. Gasil® WP100 - helps to increase water resistance of latex and silicate coatings. Also used to increase the ratio in Alkali Silicate Zinc Rich Primers. 收起 | Request Sample |
| Gasil® XE3100 | PQ Corporation - PQ公司 | Gasil® XE3100 is a synthetic amorphous silica. It is used as an ultra high efficient silica matting agent. This product is suitable for wood, coil, and general industrial coatings. It performs well in waterbased formulations. | Request Sample |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 |
