UL Prospector

成功!

成功保存搜索结果
1257 Superfast Yellow 10G Shanghai Honor Industrial Co., LTD 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起
1260 SuperFast Yellow RNG Shanghai Honor Industrial Co., LTD 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。
Antioxidant SN-1 Tiarco Chemical Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...展开 Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. 收起
HESS NCS-10 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-12 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-15 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-3 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-5 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-8 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
Octocure 462 Tiarco Chemical Octocure 462 is an aqueous zinc oxide dispersion readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing SBR and natural latex rubber.
Octocure 487 Tiarco Chemical Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product m...展开 Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product may also be used at lower concentrations as a slow precure accelerator in natural latex. 收起
Octocure 530 Tiarco Chemical Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accel...展开 Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accelerator in SBR, neoprene, and nitrile latices. This product is typically used as an activator for MBT and other thiazole accelerators, or in conjunction with dithiocarbamates or thiocarbanilides. 收起
Octocure 551 Tiarco Chemical Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usu...展开 Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usually used in conjunction with diphenyl guanidine. 收起
Octocure 573 Tiarco Chemical Octocure 573 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber.
Octocure 803 Tiarco Chemical Octocure 803 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber.
Octocure ZBZ-42 Tiarco Chemical Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary acc...展开 Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary accelerators such as ZMBT. Octocure ZBZ-42 is ideal for vulcanization processes where the formation of volatile nitrosoamines needs to be reduced. 收起
Octocure ZDB-100 Tiarco Chemical Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This prod...展开 Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This product can also be applied in low doses in non-curing natural and SBR adhesive compounds as a non-discoloring antioxidant. 收起
Octocure ZDB-50 Tiarco Chemical Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus...展开 Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus. 收起
Octocure ZDB-50 CF Tiarco Chemical Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and h...展开 Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and high modulus. This product can also be used at low doses in noncuring natural and SBR latex compounds as a non-discoloring antioxidant. 收起
Octocure ZDE-50 Tiarco Chemical Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts z...展开 Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts zinc mercaptobenzothiazole. 收起
Octocure ZDIB-50 Tiarco Chemical Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high mo...展开 Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high modulus. As a secondary accelerator, this product works well with thiurams, thiazoles, and guanidines. Octocure ZDIB-50 may be used at low levels to increase cure rates of slower curing systems. It also serves as an effective free-radical emulsion polymerization shortstop in styrene-butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) elastomer production. 收起
Octocure ZDM-50 Tiarco Chemical Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suit...展开 Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suited for use as an additive in the production of latex and latex based products. 收起
Octocure ZMBT-50 Tiarco Chemical Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This...展开 Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起
Octocure ZMBT-50 CF Tiarco Chemical Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithioca...展开 Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起
Octoguard FR-11 DF Tiarco Chemical Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起
Octoguard FR-13 DF Tiarco Chemical Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起
Octolite 424-50 Tiarco Chemical Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...展开 Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. 收起
Octolite 497 Tiarco Chemical Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...展开 Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起
Octolite 544 CF Tiarco Chemical Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...展开 Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. 收起
Octolite 640 Tiarco Chemical Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...展开 Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. 收起
Octolite 647 Tiarco Chemical Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many p...展开 Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many polymers. It is non-blooming and of high durability. This product is typically used as a rubber antioxidant stabilizer for natural, butadiene, chloroprene, and nitile latex. Octolite 647 is also used as a corrosion inhibitor and preservative (it retards oxidation, deterioration, and rancidity). 收起
Octolite 668 Tiarco Chemical Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...展开 Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. 收起
Octolite 806 Tiarco Chemical Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for u...展开 Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for use in butadiene/styrene and synthetic latex compounds as well as SBR and natural rubber compounds. 收起
Octolite 809 Tiarco Chemical Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...展开 Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. 收起
Octolite AO-50 Tiarco Chemical Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...展开 Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. 收起
Octolite WL Tiarco Chemical Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...展开 Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起
Octopol NB-47 Tiarco Chemical Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex...展开 Octopol NB-47 is an ultra-fast accelerator composed of sodium dibutyldithiocarbamate. It is ideal for use in natural latex, SBR, and CR latex compounds, where it activates thiazoles in the latex cure system. This product is of particular interest in latex compounds where the zinc level from zinc dithiocarbamates can be reduced. 收起
Octosol 449 Tiarco Chemical Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compoun...展开 Octosol 449 is a potassium oleate soap in the form of a yellow to amber liquid. It is prepared from fine oleic acid (red oil) reacted with a minimum excess of potassium hydroxide (KOH, potash). This fatty acid soap plays an important role in latex compounds by contributing to mechanical and chemical stability. Octosol 449 may be used as a primary frothing aid in gelled latex foam compounds. It may also used as a dispersant for fillers, dry chemicals, and pigments. 收起
Octosol 571 Tiarco Chemical Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitiz...展开 Octosol 571 is a cationic surfactant consisting of lauryl trimethyl ammonium chloride in a solution of water and isopropyl alcohol. It is recommended as an emulsifier in cationic or blended ionic emulsion systems. Its use in latex compounds as a "sensitizer" is due to the fact that quaternary ammonium surfactants are not compatible with the anionic latex stabilizers. Some latex foams must be gelled before curing in order to mold or emboss while wet, or to prevent loss of gauge due to cell collapse during the cure interval. 收起
Octosol 687 Tiarco Chemical Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. O...展开 Octosol 687 is a fatty acid soap prepared from ricinoleic acid reacted with a minimum excess of potassium hydroxide (KOH, potash). Potassium ricinoleate plays an important role in latex compounds by contributing to the mechanical and chemical stability. Octosol 687 is suggested for use as a primary frothing aid in gelled latex foam compounds. It is may also be used as a dispersant for fillers, dry chemicals, and pigments. 收起
Octosol 730 Tiarco Chemical Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce q...展开 Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce quality-frothed adhesives and latex foams. 收起
Octosol 731 Tiarco Chemical Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with...展开 Octosol 731 is an anionic, light yellow liquid solution of sodium salt of a carboxylated polyelectrolyte. It serves as an excellent dispersing aid in wide variety of formulations - including carpet back-coatings, dyes, pigments, and clays, as well as with inorganic compounds. 收起
Octosol 828 Tiarco Chemical Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is f...展开 Octosol 828 is a 12-mole sodium lauryl ether sulfate used in emulsion polymerization. It is generally used with high molecular weight polymers, as well as in high acid systems as an emulsifier. This product minimizes the potential for coagulation and is formaldehyde free. 收起
Octosol 853 Tiarco Chemical Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This p...展开 Octosol 853 is an anionic surfactant, in the form of a dark reddish-brown aqueous solution of sulfated fatty acids. It aids in the mechanical and chemical stability of both natural and synthetic latices during compounding, storage, and application. This product is formulated to prevent premature coagulation of the latex under such conditions as high-speed agitation, acidification, or pigmentation. Octosol 853 may also be used for gelation-control. Used as a dipping aid, it ensures uniform film deposits and good penetration. 收起
Octosol A-18 Tiarco Chemical Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, a...展开 Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, and foaming. It is used as a textile-softening agent, as a suspending agent in emulsion polymerization, as a foaming agent in latex compounds, and in cleaning and penetrating formulations. 收起
Octosol A-18A Tiarco Chemical Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Bei...展开 Octosol A-18A is a dispersion of diammonium-n-octadecylsulfosuccinamate in the form of a clear amber to creamy white liquid or paste, depending on storage temperature. It is considered an ideal foaming agent for use in acrylic latex frothed compounds. Being an ammonium neutralized surfactant, Octosol A-18A allows for reduced sodium ion content in formulations where such fixed alkali ions are believed to retard the cross-linking cure systems. 收起
Octosol ALS Tiarco Chemical Octosol ALS is an aqueous solution of a ammonium lauryl sulfate, in the form of a pale clear liquid which readily mixes in water. It is an excellent stabilizer, emulsifier, and dispersant for many industrial aqueous systems.
Octosol SLS Tiarco Chemical Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a ...展开 Octosol SLS is a clear aqueous solution of sodium lauryl sulfate, characterized by light color, low odor, a low cloud point, and low salt content. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起
Octosol SLS-30K Tiarco Chemical Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and d...展开 Octosol SLS-30K is a clear, water white to pale yellow, aqueous solution of sodium lauryl sulfate preserved with Kathon CG™. It is an excellent stabilizer and frothing aid which produces stable foams of latex compounds. It is also a good emulsifying and dispersing agent. Octosol SLS-30K is recommended for use as a biodegradable wetting agent, detergent, and emulsion stabilizer. 收起
Octosperse 425 Tiarco Chemical Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 425 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. It is suggested that lab testing information be used for acceptable performance levels. 收起
Octosperse 428 Tiarco Chemical Octosperse 428 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concent...展开 Octosperse 428 is a solution of finely ground sodium silicaflouride in water, used as a non-temperature dependent gelling agent in latex foam curing systems. It is non-staining and non-discoloring. Generally the material is diluted with water to a concentration suitable for use in a specific formulation. 收起
Octosperse TS-10 Tiarco Chemical Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...展开 Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. The eventual concentration can be established which is the most economical and efficient for a given system. 收起
Octosperse TS-30 Tiarco Chemical Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...展开 Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. For starting, it is suggested that in dye becks and wash operations that 1/2 ounce of the defoamer be used per 100 gallons of the process volume. The concentration can then be adjusted to establish the most economical and efficient concentration. 收起
Octotint 120 Tiarco Chemical Octotint 120 is an aqueous dispersion of ultramarine blue, an inorganic pigment having good alkali and heat resistance. This bright hue is opaque in water-based systems and not recommended for acidic systems. Octotint 120 blue is recommended for use in th...展开 Octotint 120 is an aqueous dispersion of ultramarine blue, an inorganic pigment having good alkali and heat resistance. This bright hue is opaque in water-based systems and not recommended for acidic systems. Octotint 120 blue is recommended for use in the rubber latex industry as a bluing agent, applied in very low percentages to intensify whiteness by offsetting yellowish undertones. 收起
Octotint 435 Tiarco Chemical Octotint 435 is an aqueous dispersion of highly refined chroma blue pigments of extremely fine particle size and purity. It can be used with good compatibility in aqueous formulations where its characteristic color is desired. Octotint 435 has pleasing an...展开 Octotint 435 is an aqueous dispersion of highly refined chroma blue pigments of extremely fine particle size and purity. It can be used with good compatibility in aqueous formulations where its characteristic color is desired. Octotint 435 has pleasing and useful color characteristics both in masstone and tint. Its pigment sources display high tinting strength and hiding power. Because it is water-based, dispersibility into a latex system is greatly enhanced while demonstrating excellent handling properties. 收起
Octotint 725 Tiarco Chemical Octotint 725 is a finely divided aqueous dispersion of rutile titanium dioxide pigment, at 60% activity. Titanium dioxide has the greatest hiding power, or opacifying power, of all pigments. It is also inert and noncombustible. Octotint 725 is formulated ...展开 Octotint 725 is a finely divided aqueous dispersion of rutile titanium dioxide pigment, at 60% activity. Titanium dioxide has the greatest hiding power, or opacifying power, of all pigments. It is also inert and noncombustible. Octotint 725 is formulated for direct addition into most latex-based compounds, thus providing the compounder with a ready-to-use, pourable form of TiO2 with improved dispersion properties. 收起
Octotint 790 Tiarco Chemical Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aq...展开 Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aqueous formulations where its characteristic color would be desired. 收起
Octowax 1500 Tiarco Chemical Octowax 1500 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining a...展开 Octowax 1500 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 1500 is designed to be added directly to latex compounds. 收起
Octowax 17 Tiarco Chemical Octowax 17 is a homogenized emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-s...展开 Octowax 17 is a homogenized emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 17 is designed to be added directly to latex compounds. 收起
Octowax 321 Tiarco Chemical Octowax 321 is a paraffin wax emulsion that is typically very stable to shear and heat-stable during drying. Suggested uses include physical modification of cured latex compounds, water resistance improvement, and improved aging characteristics brought ab...展开 Octowax 321 is a paraffin wax emulsion that is typically very stable to shear and heat-stable during drying. Suggested uses include physical modification of cured latex compounds, water resistance improvement, and improved aging characteristics brought about by the addition of this type of wax emulsion to latex. Octowax 321 is designed to be added directly to latex compounds. 收起
Octowax 5 Tiarco Chemical Octowax 5 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining anti...展开 Octowax 5 is an emulsion of blended paraffin and microcrystalline waxes, which may be used in latex rubber as an antiozonant. It can be an effective addition to the antidegradant components of latex rubber, especially in combination with non-staining antioxidants. The wax "blooms" during the cure process from the emulsion to the rubber surface, providing a barrier against ozone attack. Octowax 5 is designed to be added directly to latex compounds. 收起
Octowax MR-40 Tiarco Chemical Octowax MR-40 is a light amber-cream colored emulsion of an oxidized, modified hydrocarbon wax. The emulsion is based primarily on a nonionic surfactant, but is a mixture with anionic because of the amine-neutralized reactive components of the wax. Octowa...展开 Octowax MR-40 is a light amber-cream colored emulsion of an oxidized, modified hydrocarbon wax. The emulsion is based primarily on a nonionic surfactant, but is a mixture with anionic because of the amine-neutralized reactive components of the wax. Octowax MR-40 is suggested for use as a mold-release and lubricant. 收起
Octowet 70 Tiarco Chemical Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 70D Tiarco Chemical Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely use...展开 Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 70MS Tiarco Chemical Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 70PG Tiarco Chemical Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Additionally, Octowet 70PG is formulated so as to provide the surfactant in a non-flammable aqueous form. 收起
Octowet 70X Tiarco Chemical Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...展开 Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 75 Tiarco Chemical Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...展开 Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 75PG Tiarco Chemical Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a p...展开 Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
Octowet 75X Tiarco Chemical Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...展开 Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. 收起
PIGMENT BLUE 15:6(C.I.NO.:PB15:6,PIGMENT BLUE 15:6) Shanghai Honor Industrial Co., LTD C.I.NO.:PB15:6,PIGMENT BLUE 15:6 is the modification of copper phthalocyanine. It affords the reddest blue shade provided by any copper phthalocyanine blue pigment. In recent years it has become possible to sufficiently stabilize these pigments towards ch...展开 C.I.NO.:PB15:6,PIGMENT BLUE 15:6 is the modification of copper phthalocyanine. It affords the reddest blue shade provided by any copper phthalocyanine blue pigment. In recent years it has become possible to sufficiently stabilize these pigments towards change of modification in order to largely eliminate undesirable coloristic effects in application. In terms of fastness properties, C.I.NO.:PB15:6,PIGMENT BLUE 15:6 performs like other modifications. In baking enamels, stabilized types are completely fast to overcoating, but they are not entirely fast to bleeding in plasticized PVC. 收起
PIGMENT BLUE 60(C.I.NO.:PB60,PIGMENT BLUE 60) Shanghai Honor Industrial Co., LTD C.I.NO.:PB60,PIGMENT BLUE 60 is an Indanthrone pigment which demonstrates excellent weatherfastness. Most grades of this pigment, like other commercial vat type pigments, provide good transparency. They are primarily applied in automotive finishes, especi...展开 C.I.NO.:PB60,PIGMENT BLUE 60 is an Indanthrone pigment which demonstrates excellent weatherfastness. Most grades of this pigment, like other commercial vat type pigments, provide good transparency. They are primarily applied in automotive finishes, especially in metallic finishes. It is highly durable even in light white reductions, and shows very good fastness to organic solvents, including alcohols, esters, and ketones, aromatic and aliphatic hydrocarbons, and various types of plasticizers. This product may also be employed in plastics, rubber, and elastomers. 收起
PIGMENT BULE 15:2(C.I.NO.;PB15:2,PIGMENT BLUE 15:2) Shanghai Honor Industrial Co., LTD C.I.NO.:PB15:2,PIGMENT BLUE 15:2 encompasses a number of Copper Phthalocyanine types which are stabilized towards flocculation and change of modification. Their main area of application is in paints. In accordance with its good fastness to flocculation, C...展开 C.I.NO.:PB15:2,PIGMENT BLUE 15:2 encompasses a number of Copper Phthalocyanine types which are stabilized towards flocculation and change of modification. Their main area of application is in paints. In accordance with its good fastness to flocculation, C.I.NO.:PB15:2,PIGMENT BLUE 15:2 demonstrates good resistance to rub-out in most common binder systems. Other fastness properties in application largely equal those of P.B.15:1. In printing inks, C.I.NO.:PB15:2,PIGMENT BLUE 15:2 is employed mostly in special gravure and flexographic inks. 收起
PIGMENT BULE 15:4(C.I.NO.;PB15:4,PIGMENT BLUE 15:4) Shanghai Honor Industrial Co., LTD C.I.NO.:PB15:4,PIGMENT BLUE 15:4 is a Copper Phthalocyanine Blue pigment designated in the the Colour Index. It is stabilized towards flocculation, and shows largely the same coloristic and fastness properties as C.I.NO.:PB15:3,PIGMENT BLUE 15:3 types, bu...展开 C.I.NO.:PB15:4,PIGMENT BLUE 15:4 is a Copper Phthalocyanine Blue pigment designated in the the Colour Index. It is stabilized towards flocculation, and shows largely the same coloristic and fastness properties as C.I.NO.:PB15:3,PIGMENT BLUE 15:3 types, but often exhibits much better rheology. As with stabilized Copper Phthalocyanine Blue types, stabilization through surface treatment has proven to decrease the solvent fastness of Copper Phthalocyanine Blue, sometimes considerably so, making the pigment more sensitive to aromatics, alcohols, ethylene glycol, and ketones. This product is an attractive choice for oven drying paints, and is also recommended for gravure printing inks. 收起
PIGMENT GREEN 7 Shanghai Honor Industrial Co., LTD PIGMENT GREEN 7, C.I.NO.PG7是一种有蓝色阴影的酞菁绿颜料。它主要用于工业涂料,建筑涂料和粉末涂料,打印油墨和塑料中。这款产品具有出色的色牢度和良好的热稳定性。
PIGMENT ORANGE 13 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 13 含有C.I.NO. PO13。它与C.I.NO.:PO34,PIGMENT ORANGE 34有十分相似的颜色性,但一般更加偏黄一些。C.I.NO.:PO13, PIGMENT ORANGE 13的应用产品中聚烯烃含量很有限。此颜料是很快的清洁剂。它也被用于粘性旋转染色以及原浆染色。在图像行业,从另一方面说,使用C.I.NO.:PO13, PIGMENT ORANGE 13到一定程度用于包装印刷油墨。其耐光度比较均衡但是对一些有机溶剂色素的稳定性是极好的或近乎完美的。同...展开 PIGMENT ORANGE 13 含有C.I.NO. PO13。它与C.I.NO.:PO34,PIGMENT ORANGE 34有十分相似的颜色性,但一般更加偏黄一些。C.I.NO.:PO13, PIGMENT ORANGE 13的应用产品中聚烯烃含量很有限。此颜料是很快的清洁剂。它也被用于粘性旋转染色以及原浆染色。在图像行业,从另一方面说,使用C.I.NO.:PO13, PIGMENT ORANGE 13到一定程度用于包装印刷油墨。其耐光度比较均衡但是对一些有机溶剂色素的稳定性是极好的或近乎完美的。同样,此油墨在石蜡,植物酯和脂肪酸盐应用迅速。它们热稳定性强,能高达200°C。C.I.NO.:PO13, PIGMENT ORANGE 13也被用于金属装饰涂装,提供适合的耐光性。同样,它对清洁的漆层有抵抗性,杀菌能力也是很好的。 收起
PIGMENT ORANGE 16 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 16也被称为Dianisidine Orange。它呈黄橙色,比P.O.13和34红。PIGMENT ORANGE 16应用的主要领域在打印油墨行业。这种颜料专门用于调整P.Y.12型苯胺黄色颜料的色调。为了提供更好的透明度还生产了树脂处理类型。PIGMENT ORANGE 16不耐光也并不耐用,不适合用于涂料。但是由于它成本较低,使其适用于橡胶和纺织印刷的着色剂。
PIGMENT ORANGE 34(C.I.NO.:PO34,PIGMENT ORANGE 34) Shanghai Honor Industrial Co., LTD C.I.NO.:PO34,PIGMENT ORANGE 34 is supplied in a variety of types, which differ considerably in their particle size distributions. Specific surface areas range from 15 m2/g in highly opaque versions to about 75 m2/g in transparent types. Transparent C.I.NO...展开 C.I.NO.:PO34,PIGMENT ORANGE 34 is supplied in a variety of types, which differ considerably in their particle size distributions. Specific surface areas range from 15 m2/g in highly opaque versions to about 75 m2/g in transparent types. Transparent C.I.NO.:PO34,PIGMENT ORANGE 34 versions represent the most frequent choice for printing inks as they provide a clean, yellowish orange hue and high tinctorial strength. This product is also used in textiles and plastics to a certain extent. 收起
PIGMENT ORANGE 36, C.I.NO.: PO36 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 36, C.I.NO.: PO36, red shade orange, HP Orange 3633,an Benzimidazolone Pigments, with excellent light fastness, weather fastness, solvent fastness, and opaque organic pigments, used for industrial and automotive coatings, packaging inks, me...展开 PIGMENT ORANGE 36, C.I.NO.: PO36, red shade orange, HP Orange 3633,an Benzimidazolone Pigments, with excellent light fastness, weather fastness, solvent fastness, and opaque organic pigments, used for industrial and automotive coatings, packaging inks, metal inks. 收起
PIGMENT ORANGE 38 (C.I.NO.:PO38, PIGMENT ORANGE 38) Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 38是一种黄色调红色,主要用于打印油墨和塑料中。它显示出良好的牢度,适用于胶印油墨以及金属装饰印刷。塑料行业主要使用P.O.38为PVC,聚烯烃和聚苯乙烯着色。在涂料行业中,这种颜料有出色的耐溶剂性,可以在高档工业涂料等对于光牢度和耐用性要求不太苛刻的应用中使用。
PIGMENT ORANGE 71, C.I.NO.71, DPP Orange - HP ORANGE 3349 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 71,C.I.NO.71, DPP orange pigments is a medium orange pigment. It is mainly used for plastic color concentrate, in HDPE, PP AND PVC resins. This product has perfect migration-resistance properties, and heat resistance up to 300 degrees. It i...展开 PIGMENT ORANGE 71,C.I.NO.71, DPP orange pigments is a medium orange pigment. It is mainly used for plastic color concentrate, in HDPE, PP AND PVC resins. This product has perfect migration-resistance properties, and heat resistance up to 300 degrees. It is also used in printing inks with perfect solvent fastness and light-fastness and weather fastness. 收起
PIGMENT ORANGE 73, C.I.NO.73-HP ORANGE 3642 Shanghai Honor Industrial Co., LTD PIGMENT ORANGE 73,C.I.NO.73, DPP orange, Orange 3642 is recommended for high grade industrial paints, like OEM, Solvent stove paints, powder coatings and Coil coatings.
PIGMENT RED 112 Shanghai Honor Industrial Co., LTD PIGMENT RED 112 是一种十分好的中度红色颜料,混合了C.I. No. PR112。它的主要应用市场包括油墨印刷,抛光剂及涂料;但它也被用于其他一些领域。印刷油墨领域使用此产品主要在凸版印刷和平板印刷,凹版包装印刷油墨,柔性油墨。它的着色力很强。此颜料显现出了极好的耐光性。本产品极易溶于脂肪酸盐中,虽然它完全不能溶于石蜡,只是仅仅微溶于黄油及其它油脂类(步骤3)。它们也被干净漆涂层影响和具有杀菌作用。 在油漆中,PIGMENT RED 112 产生了类似红色的颜色。它或许能被使用到,但绝...展开 PIGMENT RED 112 是一种十分好的中度红色颜料,混合了C.I. No. PR112。它的主要应用市场包括油墨印刷,抛光剂及涂料;但它也被用于其他一些领域。印刷油墨领域使用此产品主要在凸版印刷和平板印刷,凹版包装印刷油墨,柔性油墨。它的着色力很强。此颜料显现出了极好的耐光性。本产品极易溶于脂肪酸盐中,虽然它完全不能溶于石蜡,只是仅仅微溶于黄油及其它油脂类(步骤3)。它们也被干净漆涂层影响和具有杀菌作用。 在油漆中,PIGMENT RED 112 产生了类似红色的颜色。它或许能被使用到,但绝不仅限于空气干燥漆之中,而且在烘烤搪瓷中,提供了合适的条件以避免爆裂。烘烤温度介于140-160°C 之间,浓度阈值为0.1%;介于180-200°C,极限位2.5%。其耐涂性不尽人意。但耐光性和耐环境性十分优异,甚至减少了白色。优异的牢固性能使得该产品适用于高级涂料,比如汽车漆及其他普通工业涂料。电泳漆是一种特殊用途的涂料,在乳胶漆中也有其特殊的用途,尽管它在外观上的固定性相对较差。 收起
PIGMENT RED 12 Shanghai Honor Industrial Co., LTD PIGMENT RED 12 是其中一种更为重要的波尔多有色材料,混合了C.I. No. PR12。印刷行业在平版印刷,凹版包装印刷和柔性水墨中广泛使用了PIGMENT RED 12。此颜料十分的耐晒而不褪色。它显示出很高的着色强度;对溶剂及其他的媒介的印刷牢度很适度。印刷品会受石蜡、黄油及其他的因素影响。PIGMENT RED 12 同样相似的对碱很敏感。 纺织品印刷使用PIGMENT RED 12 绝对的耐晒且不褪色。它能够承受最高达150°C的高温;甚至到了180°C,此颜料可保持其初始颜色值。涂...展开 PIGMENT RED 12 是其中一种更为重要的波尔多有色材料,混合了C.I. No. PR12。印刷行业在平版印刷,凹版包装印刷和柔性水墨中广泛使用了PIGMENT RED 12。此颜料十分的耐晒而不褪色。它显示出很高的着色强度;对溶剂及其他的媒介的印刷牢度很适度。印刷品会受石蜡、黄油及其他的因素影响。PIGMENT RED 12 同样相似的对碱很敏感。 纺织品印刷使用PIGMENT RED 12 绝对的耐晒且不褪色。它能够承受最高达150°C的高温;甚至到了180°C,此颜料可保持其初始颜色值。涂料行业主要将其用在干燥漆之中。它仅适用于高浓度配方。特别是在充分和相关的色调中。PIGMENT RED 12 具有相当令人满意的耐光性。此种颜料实际上偶尔也用于其牢度性能符合其规格的乳胶漆中。此产品也有一些特殊的运用, 比如说汽车清洁剂、地板抛光、鞋抛光等,并经常用于将办公用品和皮革染色。 收起
PIGMENT RED 122, C.I.NO.: PR122 Shanghai Honor Industrial Co., LTD PIGMENT RED 122,C.I.NO.: PR122, HP Red 26120 is a Quinacridone pigments with color index number pigment red 122, C.I.NO.: PR122, this is belong to Quinacridone group, with excellent anti-migration and heat stability property, and blue shade red or Pink co...展开 PIGMENT RED 122,C.I.NO.: PR122, HP Red 26120 is a Quinacridone pigments with color index number pigment red 122, C.I.NO.: PR122, this is belong to Quinacridone group, with excellent anti-migration and heat stability property, and blue shade red or Pink color. Is mainly used for high quality coatings, inks and plastics. 收起
PIGMENT RED 146 Shanghai Honor Industrial Co., LTD PIGMENT RED 146是一种具有很好耐溶性的蓝红色颜料。它主要用于印刷油墨、涂料和油漆。油墨行业使用C.I.NO.:PR146, PIGMENT RED 146来作为凸版印刷和胶印的油墨,同时也作为包装凹印和柔印印刷的油墨。此颜料可抗石油溶剂、邻苯二甲酸二丁酯、黄油、肥皂脂肪酸盐、碱、酸。此外,它们也十分稳定以清理漆涂层。至于热稳定性,C.I.NO.:PR146, PIGMENT RED 14能保留其颜色至10分钟(200°C),以及在180°C时30分钟。C.I.NO.:PR146, PIGME...展开 PIGMENT RED 146是一种具有很好耐溶性的蓝红色颜料。它主要用于印刷油墨、涂料和油漆。油墨行业使用C.I.NO.:PR146, PIGMENT RED 146来作为凸版印刷和胶印的油墨,同时也作为包装凹印和柔印印刷的油墨。此颜料可抗石油溶剂、邻苯二甲酸二丁酯、黄油、肥皂脂肪酸盐、碱、酸。此外,它们也十分稳定以清理漆涂层。至于热稳定性,C.I.NO.:PR146, PIGMENT RED 14能保留其颜色至10分钟(200°C),以及在180°C时30分钟。C.I.NO.:PR146, PIGMENT RED 14在纺织品中还显现出了良好的耐光性。C.I.NO.:PR146, PIGMENT RED 14还可用于涂料,主要应用于乳液建筑涂料;它也适合应用在耐久性不是很重要的一般工业涂料行业。C.I.NO.:PR146, PIGMENT RED 14可用于与钼酸盐颜料产生明亮的不透明红色颜料组合。在聚合物中,C.I.NO.:PR146, PIGMENT RED 14只用于彩色硬质PVC。C.I.NO.:PR146, PIGMENT RED 14是各种特殊应用的合适选择。该列表中包括木材污渍。此产品具有快速覆盖和稳定性在硝基酸催化聚酯清漆。强烈的色彩处于蓝色色标第七等耐光性。它的其它应用领域包括办公用品和艺术类颜料,清洁剂、纸张的纺前原浆着色,洗衣标记等。 收起
PIGMENT RED 169(C.I.NO.:PR169,PIGMENT RED 169) Shanghai Honor Industrial Co., LTD C.I.NO.:PR169,PIGMENT RED 169 is suited to letterpress and offset printing inks, where it provides the standard purple-red for three and four color printing in accordance with the DIN scale. Moreover, this product is frequently used for toluene based publ...展开 C.I.NO.:PR169,PIGMENT RED 169 is suited to letterpress and offset printing inks, where it provides the standard purple-red for three and four color printing in accordance with the DIN scale. Moreover, this product is frequently used for toluene based publication gravure printing inks, where it is sometimes applied in combination with C.I.NO.:PR53,PIGMENT RED 53. One of the major fields of application for C.I.NO.:PR169,PIGMENT RED 169 is in aqueous flexographic printing inks. 收起
PIGMENT RED 176 (C.I.NO.:PR176, PIGMENT RED 176) Shanghai Honor Industrial Co., LTD PIGMENT RED 176提供蓝红色调,比C.I.NO.:PR187,PIGMENT RED 187和208更蓝,比C.I.NO.:PR185和PIGMENT RED 185更黄。它主要用于塑料行业。该颜料在增塑PVC中显示出很好的迁移牢度。这款颜料还用于聚烯烃和聚苯乙烯,其耐光性同样良好。应用包括层压塑料板装饰打印等。PIGMENT RED 176的色调接近三和四色打印的标准洋红色。
PIGMENT RED 177(C.I.NO.:PR177,PIGMENT RED 177) Shanghai Honor Industrial Co., LTD C.I.NO.:PR177,PIGMENT RED 177 is mainly applied in industrial paints, in spin dyeing, and in polyolefin and PVC coloration. Combined with inorganic pigments, ir exhibits high lightfastness and weatherfastness. Combinations with Molybdate Red are also used...展开 C.I.NO.:PR177,PIGMENT RED 177 is mainly applied in industrial paints, in spin dyeing, and in polyolefin and PVC coloration. Combined with inorganic pigments, ir exhibits high lightfastness and weatherfastness. Combinations with Molybdate Red are also used in automotive finishes, especially for automotive O.E.M. finishes and for automotive refinishes. The types are highly transparent, which makes them suitable colorants for transparent paints. At typical processing temperatures for oven drying systems, C.I.NO.:PR177,PIGMENT RED 177 is entirely fast to overcoating. This product is recommended for automotive finishes, plastics, transparent films, PUR and PVC, spin dyeing, and printing inks. 收起
PIGMENT RED 179(C.I.NO.:PR179,PIGMENT RED 179) Shanghai Honor Industrial Co., LTD C.I.NO.:PR179,PIGMENT RED 179, a dimethyllperylimide compound, is probably the most significant member of its class. The pigment is primarily used in industrial coatings, especially for high grade original automotive (O.E.M) finishes and automotive refini...展开 C.I.NO.:PR179,PIGMENT RED 179, a dimethyllperylimide compound, is probably the most significant member of its class. The pigment is primarily used in industrial coatings, especially for high grade original automotive (O.E.M) finishes and automotive refinishes. It can provide clean shades of red, as well as maroon and Bordeaux shades. Transparent types are available for metallic finishes, sometimes also in combination with other organic or inorganic pigments. This product is used to a considerable extent in paints, and may also be used in plastics. 收起
PIGMENT RED 184 Shanghai Honor Industrial Co., LTD PIGMENT RED 184 带来了C.I.NO.:PR146.中偏蓝色的红色色彩。这两种产品在应用之中也十分的类似。它的印刷品抗脂肪酸盐、黄油、石蜡、邻苯二甲酸二丁酯、石油溶剂,和甲苯。C.I.NO.:PR184, PIGMENT RED 184是特殊用于抗碱、酸、耐皂性环境中。优良的耐有机溶剂性使得C.I.NO.:PR184, PIGMENT RED 184成为凸版印刷和胶印应用的合适选择,以及包装凹印油墨、柔印油墨。其金属装饰印刷品能抵抗清漆涂层。. C.I.NO.:PR184, PIGMENT ...展开 PIGMENT RED 184 带来了C.I.NO.:PR146.中偏蓝色的红色色彩。这两种产品在应用之中也十分的类似。它的印刷品抗脂肪酸盐、黄油、石蜡、邻苯二甲酸二丁酯、石油溶剂,和甲苯。C.I.NO.:PR184, PIGMENT RED 184是特殊用于抗碱、酸、耐皂性环境中。优良的耐有机溶剂性使得C.I.NO.:PR184, PIGMENT RED 184成为凸版印刷和胶印应用的合适选择,以及包装凹印油墨、柔印油墨。其金属装饰印刷品能抵抗清漆涂层。. C.I.NO.:PR184, PIGMENT RED 184还用于橡胶之中。 收起
PIGMENT RED 185 (C.I.NO.:PR185, PIGMENT RED 185) Shanghai Honor Industrial Co., LTD PIGMENT RED 185提干净,偏蓝色调的红色。这款颜料完全或几乎完全不溶于普通溶剂中。其主要应用在图形打印和塑料的大量着色领域。打印油墨行业在所有印刷技术中使用C.I.NO.:PR185,PIGMENT RED 185。打印油墨显示出很好的溶剂牢度。C.I.NO.:PR185,PIGMENT RED 185在塑料行业广泛应用于为PVC、聚氯乙烯和聚烯烃上色。
PIGMENT RED 188 Shanghai Honor Industrial Co., LTD PIGMENT RED 188 是一种偏黄的红色颜料,其具有很好的色牢性。其主要应用领域是在印刷油墨和油漆,此颜料适用于所有的印刷技术。1/1-1/25 SD凸版印刷论证此产品5-6等在蓝色色标上的耐光性等同于5等。颜料的着色强度表现的较差。然而,这些印刷品能很快抗御有机溶剂、脂肪、石蜡、脂肪酸盐、碱和酸。它们亦可以快速清除漆涂层,并可用于消毒。在DIN 16 524/1混合溶剂中色牢度稳定,然而,这还不够完美。说到它的热稳定性,, P.R.188颜料可容忍暴露在最高220°C的环境中10分钟,或是在18...展开 PIGMENT RED 188 是一种偏黄的红色颜料,其具有很好的色牢性。其主要应用领域是在印刷油墨和油漆,此颜料适用于所有的印刷技术。1/1-1/25 SD凸版印刷论证此产品5-6等在蓝色色标上的耐光性等同于5等。颜料的着色强度表现的较差。然而,这些印刷品能很快抗御有机溶剂、脂肪、石蜡、脂肪酸盐、碱和酸。它们亦可以快速清除漆涂层,并可用于消毒。在DIN 16 524/1混合溶剂中色牢度稳定,然而,这还不够完美。说到它的热稳定性,, P.R.188颜料可容忍暴露在最高220°C的环境中10分钟,或是在180°C 达到30分钟. 涂料工业使用C.I.NO.:PR188, PIGMENT RED 188在高档工业涂料的优秀稳定性。它的全色调等于蓝色色标上的第七等。TiO2降到1:5也能表现出相同点耐光性。颜料的耐候性同样等同于全色彩和其余相近的深色调。此颜料在烘烤温度低于160°C的情况下不渗透分散,它在涂料在可以保持其色彩在最高200°C当中。C.I.NO.:PR188, PIGMENT RED 188常常可在装饰性涂料中找到,此领域在美国的适用范围十分广泛。高度不透明的C.I.NO.:PR188, PIGMENT RED 188级已被推广在市场中。它比其他任何种类带来了灿烂的,至今更加偏黄的红色。 收起
PIGMENT RED 2 Shanghai Honor Industrial Co., LTD PIGMENT RED 2 是一种中等红色类型颜料混合了C.I. No. PR2。它主要的实用范围是印刷油墨领域。此类型物质是一些粗糙的颗粒,经常被用来配制高度着色的油墨,具有良好的流动性,并能够够满足相应的应用要求的类型。此颜料同时也展现出了良好的光泽型。 PIGMENT RED 2 在一些特殊的印刷品之中并不是表现的很完美。它主要用于平版印刷和凹版包装印刷和柔印水墨。此颜料同时也适用于纺织印刷。本产品还可作为一种颜料连接黏胶纤维和黏胶纤维素染色纺织品以及作为木浆棉膜的纺前染色。
PIGMENT RED 202(C.I.NO.:PR202,PIGMENT RED 202) Shanghai Honor Industrial Co., LTD C.I.NO.:PR202,PIGMENT RED 202, a very lightfast and weatherfast mixed phase quinacridone pigment, provides a dull bluish shade. It is primarily applied in automotive finishes. Even highly transparent types with fine particle sizes provide two-coat metalli...展开 C.I.NO.:PR202,PIGMENT RED 202, a very lightfast and weatherfast mixed phase quinacridone pigment, provides a dull bluish shade. It is primarily applied in automotive finishes. Even highly transparent types with fine particle sizes provide two-coat metallic finishes which offer excellent rheological properties. In terms of fastness to overcoating and other aspects of pigment performance and properties, C.I.NO.:PR202,PIGMENT RED 202 largely behaves like C.I.NO.:PR122,PIGMENT RED 122. 收起
PIGMENT RED 208(C.I.NO.:PR208,PIGMENT RED 208) Shanghai Honor Industrial Co., LTD C.I.NO.:PR208,PIGMENT RED 208 affords medium shades of red. The pigment exhibits good fastness to chemicals and solvents. Its main area of application is in the mass coloration of plastics and in packaging gravure printing inks. This product can be also b...展开 C.I.NO.:PR208,PIGMENT RED 208 affords medium shades of red. The pigment exhibits good fastness to chemicals and solvents. Its main area of application is in the mass coloration of plastics and in packaging gravure printing inks. This product can be also be used in spin dyeing, general industrial finishes, and in a variety of specialty media. 收起
PIGMENT RED 213 (C.I.NO.:PR213, PIGMENT RED 213) Shanghai Honor Industrial Co., LTD PIGMENT RED 213是一种很少在日本以外遇到的产品。颜料呈现蓝色调红色,匹配三和四色打印的标准品红色时其蓝色太深。市售类型相对较不透明,但是与其它Naphthol AS颜料相比比较不耐光。
PIGMENT RED 22 Shanghai Honor Industrial Co., LTD PIGMENT RED 22 是一种黄-红色颜料混合C.I. No. PR22.。它主要的市场在纺织品印刷,但它也被用于整个图像领域,比如说在平面印刷和凹版印刷,尤其是在硝化纤维为基础的油墨中。PIGMENT RED 22 在抗脂肪酸盐与碱性必须条件下使用十分有效。这款产品有着很高的着色强度,它在一定程度上又比C.I.NO.:PR9 淡一些,PIGMENT RED 9有着很高的区域浓度;在较低浓度的色素区是偏黄色。涂料工业在空气干燥系统中采用PIGMENT RED 22,在乳胶漆中,有时偶尔用于工业用漆。...展开 PIGMENT RED 22 是一种黄-红色颜料混合C.I. No. PR22.。它主要的市场在纺织品印刷,但它也被用于整个图像领域,比如说在平面印刷和凹版印刷,尤其是在硝化纤维为基础的油墨中。PIGMENT RED 22 在抗脂肪酸盐与碱性必须条件下使用十分有效。这款产品有着很高的着色强度,它在一定程度上又比C.I.NO.:PR9 淡一些,PIGMENT RED 9有着很高的区域浓度;在较低浓度的色素区是偏黄色。涂料工业在空气干燥系统中采用PIGMENT RED 22,在乳胶漆中,有时偶尔用于工业用漆。其应用领域包括paper mass和表面着色,颜色铅笔,艺术上色及其他用途。 收起
PIGMENT RED 242(C.I.NO.:PR242,PIGMENT RED 242) Shanghai Honor Industrial Co., LTD C.I.NO.:PR242,PIGMENT RED 242 affords a yellowish red shade, referred to as scarlet. It exhibits good to excellent resistance to organic solvents, such as alcohols, esters, ketones, and aliphatic hydrocarbons. The pigment is more soluble in aromatic hydro...展开 C.I.NO.:PR242,PIGMENT RED 242 affords a yellowish red shade, referred to as scarlet. It exhibits good to excellent resistance to organic solvents, such as alcohols, esters, ketones, and aliphatic hydrocarbons. The pigment is more soluble in aromatic hydrocarbons. C.I.NO.:PR242,PIGMENT RED 242, like other members of its class, is fast to alkali and acid. This product is used in plastics, paints, and printing inks. 收起
PIGMENT RED 254(C.I.NO.:PR254,PIGMENT RED 254) Shanghai Honor Industrial Co., LTD C.I.NO.:PR254,PIGMENT RED 254 is a DPP pigment which shows good coloristic and fastness properties. It is a widely used pigment for high industrial paints, especially in original automotive finishes and automotive refinishes. This product shows very good ...展开 C.I.NO.:PR254,PIGMENT RED 254 is a DPP pigment which shows good coloristic and fastness properties. It is a widely used pigment for high industrial paints, especially in original automotive finishes and automotive refinishes. This product shows very good fastness to organic solvents, fast blooming and bleeding, and good lightfastness and weatherfastness. It is used to color plastics which are processed at high temperatures. 收起