| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...展开 CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. 收起 | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...展开 CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. 收起 | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...展开 CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. 收起 | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...展开 CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. 收起 | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...展开 CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. 收起 | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...展开 CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. 收起 | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...展开 CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. 收起 | |
| ENOVA® Aerogel IC3100 | Cabot Corporation - Additives | ENOVA® Aerogel IC3100 is a thermal insulation additive featuring ultra-low thermal conductivity, extreme shear resistance, complete hydrophobicity, and a smooth, even finish. This product is well suited for use in thin-film, thermally-insulative coating a...展开 ENOVA® Aerogel IC3100 is a thermal insulation additive featuring ultra-low thermal conductivity, extreme shear resistance, complete hydrophobicity, and a smooth, even finish. This product is well suited for use in thin-film, thermally-insulative coating applications. 收起 | |
| ENOVA® Aerogel IC3110 | Cabot Corporation - Additives | ENOVA® Aerogel IC3110 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use i...展开 ENOVA® Aerogel IC3110 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use in thermally-insulative coating applications. 收起 | |
| ENOVA® Aerogel IC3120 | Cabot Corporation - Additives | ENOVA® Aerogel IC3120 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use i...展开 ENOVA® Aerogel IC3120 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use in thermally-insulative coating applications. 收起 | |
| ENOVA® Aerogel MT1100 | Cabot Corporation - Additives | ENOVA® Aerogel MT1100 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV...展开 ENOVA® Aerogel MT1100 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV-curable coating applications. 收起 | |
| ENOVA® Aerogel MT1200 | Cabot Corporation - Additives | ENOVA® Aerogel MT1200 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV...展开 ENOVA® Aerogel MT1200 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV-curable coating applications 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| LUMIRA® Translucent Aerogel LA1000 | Cabot Corporation - Additives | LUMIRA® Translucent Aerogel LA1000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited fo...展开 LUMIRA® Translucent Aerogel LA1000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited for use in glass and polycarbonate daylighting systems. 收起 | |
| LUMIRA® Translucent Aerogel LA2000 | Cabot Corporation - Additives | LUMIRA® Translucent Aerogel LA2000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited fo...展开 LUMIRA® Translucent Aerogel LA2000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited for use in glass and polycarbonate daylighting systems. 收起 | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. |
