| Grilonit® H 81016 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 81016 is a phenol free Mannichbase hardener formulated to provide fast and/or low temperature curing for wet and cold substrates. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 82044 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82044 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a low yellowing tendency and low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 82062 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82062 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a short pot life, and after full cure a low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 84024 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, c...展开 Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, curing with liquid epoxy resins. 收起 | |
| Grilonit® H 84026 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing ag...展开 Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing agent with liquid epoxy resins. 收起 | |
| Grilonit® H 84043 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84043 is a modified cycloaliphatic polyamine adduct that has good flow properties, low carbamate tendency, and low yellowing tendency. This product is used as a slow amine for self-levelling mortars. | |
| Grilonit® P 6835 | EMS-CHEMIE AG (PRIMID) | Grilonit® P 6835 is a thermoplastic modified co-polyamide additive that has improved abrasion resistance, enhanced slip coverage, and improved edge coverage. This product is used to produce nylon modified polyester and hybrid powder coatings. | |
| Grilonit® V-68-39 | EMS-CHEMIE AG (PRIMID) | Grilonit® V-68-39 is a high performance matting wax that is formulated to provide good gloss reduction, good flow, and enhanced mar and scratch resistance. This product used for matte finish powder coats. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Primid® QM-1260 | EMS-CHEMIE AG (PRIMID) | Primid® QM-1260 is an improved hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high color direct-fired powder coats. | |
| Primid® SF-4510 | EMS-CHEMIE AG (PRIMID) | Primid® SF-4510 is a hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high gloss powder coatings as well as applications were good outgassing properties are required. | |
| Primid® XL-552 | EMS-CHEMIE AG (PRIMID) | Primid® XL-552 is a beta-hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in exterior weather resistant powder coats. | |
| Zinc Oxide, First Grade | Zouping Huiyuan Chemical Co., Ltd. | Zinc Oxide, First Grade, in the form of a white to slightly yellow powder, is a mineral that can be used in coatings and pigments. This product contains less than 0.1% lead oxide and contains less than 0.10% water-soluble material. | |
| Zinc Oxide, Premium Grade | Zouping Huiyuan Chemical Co., Ltd. | Zinc Oxide, Premium Grade, in the form of a white powder, is a mineral that can be used in coatings and pigments. This product contains less than 0.037% lead oxide and contains less than 0.10% water-soluble material. | |
| Zinc Oxide, Qualified Grade | Zouping Huiyuan Chemical Co., Ltd. | Zinc Oxide, Qualified Grade, in the form of a white to slightly yellow powder, is a mineral that can be used in coatings and pigments. This product contains less than 0.14% lead oxide and contains less than 0.15% water-soluble material. | |
| Zinc Powder, First Class | Zouping Huiyuan Chemical Co., Ltd. | Zinc Powder, First Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 d...展开 Zinc Powder, First Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 degrees Celsius. It is insoluble in water but soluble in acid and alkaline conditions. 收起 | |
| Zinc Powder, Fourth Class | Zouping Huiyuan Chemical Co., Ltd. | Zinc Powder, Fourth Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 ...展开 Zinc Powder, Fourth Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 degrees Celsius. It is insoluble in water but soluble in acid and alkaline conditions. 收起 | |
| Zinc Powder, Second Class | Zouping Huiyuan Chemical Co., Ltd. | Zinc Powder, Second Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 ...展开 Zinc Powder, Second Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 degrees Celsius. It is insoluble in water but soluble in acid and alkaline conditions. 收起 | |
| Zinc Powder, Third Class | Zouping Huiyuan Chemical Co., Ltd. | Zinc Powder, Third Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 d...展开 Zinc Powder, Third Class, in the form of a dark gray, metallic powder, is a raw material that can be used in heavy anti-corrosion coatings. This product's density is 7.14 g/cm3. Its melting point is 419.58 degrees Celsius, and its boiling point is 907 degrees Celsius. It is insoluble in water but soluble in acid and alkaline conditions. 收起 |
