| Barium Sulphate BS-419 | Briture Co., Ltd. | Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in po...展开 Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in powder coatings and printing ink. 收起 | |
| Chlorinated Polypropylene Granular Form | Briture Co., Ltd. | Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and ...展开 Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and fire resistance. Chlorinated Polypropylene Granular Form is used in composite printing inks, coating film, and plastics paint. 收起 | |
| FY-4902 Silicone Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4902 Silicone Surfactant appears as a yellowish, transparent liquid. This product is a nonionic surfactant, and is designed to increase wetting, spreading, and dispersion properties. It can be used in inks and coating applications. | |
| FY-4903 Silicon Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating ...展开 FY-4903 Silicon Surfactant appears as a colorless to yellowish transparent liquid. This product is designed to increase wetting, spreading, and dispersion properties in the end product. It can be used in solvent-based or water-based inks and in coating applications. 收起 | |
| FY-F501 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or wa...展开 FY-F501 Fluoride Surfactant appears as a yellowish, transparent liquid. This product is designed to reduce the surface tension in a liquid, and to increase wetting, dispersion, and levelling, among other properties. It can be used in solvent-based or water-based coatings and ink applications. 收起 | |
| FY-F502 Fluoride Surfactant | Guangzhou Fluorine Reason Silicon Science and Technology Co., Ltd. | FY-F502 Fluoride Surfactant appears as a dark yellow transparent liquid. This product is used to reduce the surface tension of liquids and to increase foaming abilities. In particular, it can be used in solvent-based and water-based coatings and inks. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Hydroxyl Modified Ternary Copolymer Resin B-VAGH | Briture Co., Ltd. | Hydroxyl Modified Ternary Copolymer Resin B-VAGH is a hydroxyl modified ternary copolymer white powder of vinyl chloride, vinyl acetate and vinyl alcohol. This product improves paint performance, reinforces adhesive power, and has good solubility, flexibi...展开 Hydroxyl Modified Ternary Copolymer Resin B-VAGH is a hydroxyl modified ternary copolymer white powder of vinyl chloride, vinyl acetate and vinyl alcohol. This product improves paint performance, reinforces adhesive power, and has good solubility, flexibility, hardness, and chemical resistance. Hydroxyl Modified Ternary Copolymer Resin B-VAGH is used in industrial paint, repair paint, vessel paint, wood paint, steel board adhesives, varnish, and tape adhesive. 收起 | |
| Polyamide Resin Alcohol Soluble PA-010 | Briture Co., Ltd. | Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stabi...展开 Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stability. Polyamide Resin Alcohol Soluble PA-010 is used in flexographic plastic ink, printing ink, and heat seal coating. 收起 | |
| Polyamide Resin Co-Solvent Soluble | Briture Co., Ltd. | Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in va...展开 Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in various printing inks. 收起 | |
| Saturated Epoxy Resin E-12 | Briture Co., Ltd. | Saturated Epoxy Resin E-12 is a light yellow granular epoxy resin. This product has a softening point of 88 to 96°C. Saturated Epoxy Resin E-12 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive co...展开 Saturated Epoxy Resin E-12 is a light yellow granular epoxy resin. This product has a softening point of 88 to 96°C. Saturated Epoxy Resin E-12 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive coatings. 收起 | |
| Saturated Epoxy Resin E-14 | Briture Co., Ltd. | Saturated Epoxy Resin E-14 is a light yellow granular epoxy resin. This product has a softening point of 89 to 94°C. Saturated Epoxy Resin E-14 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive co...展开 Saturated Epoxy Resin E-14 is a light yellow granular epoxy resin. This product has a softening point of 89 to 94°C. Saturated Epoxy Resin E-14 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive coatings. 收起 | |
| Saturated Epoxy Resin E-20 | Briture Co., Ltd. | Saturated Epoxy Resin E-20 is a light yellow granular epoxy resin. This product has a softening point of 64 to 76°C. Saturated Epoxy Resin E-20 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive co...展开 Saturated Epoxy Resin E-20 is a light yellow granular epoxy resin. This product has a softening point of 64 to 76°C. Saturated Epoxy Resin E-20 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive coatings. 收起 | |
| Saturated Polyester Resin P7030 | Briture Co., Ltd. | Saturated Polyester Resin P7030 is a clear light yellow carboxyl saturated polyester resin. This product has high gloss, good flow effect, mechanical properties, decorative effects, yellowing resistance and durability. Saturated Polyester Resin P7030 is u...展开 Saturated Polyester Resin P7030 is a clear light yellow carboxyl saturated polyester resin. This product has high gloss, good flow effect, mechanical properties, decorative effects, yellowing resistance and durability. Saturated Polyester Resin P7030 is used to produce hybrid powder coatings. 收起 | |
| Silane Coupling Agent 792 | Briture Co., Ltd. | Silane Coupling Agent 792 is a colorless to yellowish transparent liquid silane coupling agent. This product is an adhesion promoter for epoxy, MS polymer, RTV silicone and PVC-based sealants. Silane Coupling Agent 792 is also a component in primer system...展开 Silane Coupling Agent 792 is a colorless to yellowish transparent liquid silane coupling agent. This product is an adhesion promoter for epoxy, MS polymer, RTV silicone and PVC-based sealants. Silane Coupling Agent 792 is also a component in primer systems for hybrid, MS polymer and polyurethane sealants. 收起 | |
| Silane Coupling Agent BA-550 | Briture Co., Ltd. | Silane Coupling Agent BA-550 is a colorless transparent liquid that is completely and immediately soluble in water, alcohol, and aromatic and alip hatic hydrocarbons. This product improves adhesion and pigment dispersion. Silane Coupling Agent BA-550 is u...展开 Silane Coupling Agent BA-550 is a colorless transparent liquid that is completely and immediately soluble in water, alcohol, and aromatic and alip hatic hydrocarbons. This product improves adhesion and pigment dispersion. Silane Coupling Agent BA-550 is used in latex coatings, and adhesives. 收起 | |
| Silane Coupling Agent BA-560 | Briture Co., Ltd. | Silane Coupling Agent BA-560 is a colorless transparent liquid coupling agent. This product improves adhesion and mechanical strength. Silane Coupling Agent BA-560 is used in adhesives and epoxy sealing. | |
| Thermoplastic Solid Acrylic Resin BA-66 | Briture Co., Ltd. | Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA...展开 Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA-66 is used in soft plastic paint, plastic printing ink, container paint, and industry paint. 收起 | |
| Titanium Dioxide Anatase BA-01 | Briture Co., Ltd. | Titanium Dioxide Anatase BA-01 is a white titanium dioxide powdered pigment. This product has tinting power and fineness and dispersibility properties. Titanium Dioxide Anatase BA-01 is used in paints. | |
| Titanium Dioxide Rutile BR-889 | Briture Co., Ltd. | Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-l...展开 Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-level solvent coatings, high gloss paint, industrial paint, surface printing ink, iron printing ink, and powder coatings. 收起 | |
| Tri Isobutyl Phosphate 99%min | Briture Co., Ltd. | Tri Isobutyl Phosphate 99%min is a colorless transparent liquid. This product is used as a defoamer. Tri Isobutyl Phosphate 99%min is used in dyeing and printing ink. |
