| SILIKOPUR® 8081 | Evonik Operations GmbH, BL Coating Additives | 硅改性的聚氨酯乳液，其特点为可产生水珠效果，用于皮革面漆手感滑，极高的柔韧性、良好的重涂性能、良好的自干性、高相容性和可用水稀释 | Request Sample |
| SIPERNAT® 800 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 800 is a precipitated synthetic sodium aluminosilicate that is manufactured in the USA. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SIPERNAT® 820 A | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 820 A is a sodium aluminium silicate. It is produced by a special precipitation and drying process and is employed as a partial replacement for titanium dioxide. | Request Sample |
| SIPERNAT® 833 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 833 is a precipitated synthetic sodium aluminosilicate. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SIPERNAT® 835 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic ...展开 SIPERNAT® 835 is a precipitated synthetic sodium magnesium aluminosilicate that can be effective as a titanium dioxide extender for paints and coatings applications. It has proven particularly useful in high PVC formulations based on VAE or vinyl acrylic binders. 收起 | Request Sample |
| SIPERNAT® 898 | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 898 is a precipitated synthetic sodium aluminosilicate. It is a versatile, cost-effective titanium dioxide extender for paints and coatings applications. | Request Sample |
| SPHERILEX® DP-0110 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss....展开 SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss. In particular, SPHERILEX® DP-0110 is ideal for achieving burnish-and scrub-resistant satin and eggshell finishes, and, when used in combination with silica matting agents, can enable deep matte, natural-looking wood coatings that have improved scratch, burnish, and mar resistance. It can also significantly improve the hardness of coil coatings. 收起 | Request Sample |
| SPHERILEX® DP-0111 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0111 is a precipitated amorphous (crystalline free) silica with unique spherical particle shape and very narrow particle size distribution. | Request Sample |
| SPHERILEX® DP-0112 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0112 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution. | Request Sample |
| SPHERILEX® DP-0115 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0115 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution. | Request Sample |
| STANLUX® Paste 1100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulatio...展开 STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses High Aromatic solvent. 收起 | |
| STANLUX® Paste 1120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation ...展开 STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 17 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...展开 STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial ...展开 STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...展开 STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...展开 STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...展开 STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展开 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...展开 STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| TEGO® Color Aid 7062 | Evonik Operations GmbH, BL Coating Additives | TEGO® Color Aid 7062 is a compatibilizer for solventborne base paints. It can be post added to low polar base paints and helps the color acceptance of universal colorants. | Request Sample |
| TEGO® Color Aid 7066 | Evonik Operations GmbH, BL Coating Additives | TEGO® Color Aid 7066 is a wetting and dispersing additive for waterborne formulations. It can be post added to the paint and helps the color strength development and color acceptance, so it works like a compatibilizer. When used as main dispersant, TEGO® ...展开 TEGO® Color Aid 7066 is a wetting and dispersing additive for waterborne formulations. It can be post added to the paint and helps the color strength development and color acceptance, so it works like a compatibilizer. When used as main dispersant, TEGO® Color Aid 7066 stabilizes inorganic pigments, especially iron oxide black. 收起 | Request Sample |
| TEGO® Dispers 711 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 711 W is an anionic wetting and dispersing additive for waterborne formulations. It is especially suitable for inorganic pigments and fillers and combines very good viscosity reduction with enhanced colorant acceptance. | Request Sample |
| TEGO® Dispers 712 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 712 W is an anionic wetting and dispersing additive for waterborne formulations. It is especially suitable for inorganic pigments and fillers and combines very good viscosity reduction with enhanced colorant acceptance. | Request Sample |
| TEGO® Dispers 717 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 717 W is an anionic wetting and dispersing additive for waterborne formulations. It combines very good viscosity reduction when used with inorganic pigments and enhanced compatibility of tinted paints. | Request Sample |
| TEGO® Foamex 11 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 11 is a highly efficient, especially low-VOC defoamer emulsion based on polyether siloxane technology. Developed for architectural paints. | Request Sample |
| TEGO® Foamex 18 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 18 is a compatible defoamer concentrate based on organic polymer technology. Free of silicone, solvent, and mineral oil. | Request Sample |
| TEGO® Foamex 2 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 2 is a cost-effective emulsion defoamer based on hydrocarbon compounds combining good defoaming and compatibility for water-based paints. TEGO® Foamex 2 is silicone-free and silica-free. | Request Sample |
| TEGO® Foamex 27 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 27 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam. | Request Sample |
| TEGO® Foamex 8050 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 8050 is a highly effective defoamer concentrate based on polyether siloxane technology. Highly suitable as grinding defoamer. | Request Sample |
| TEGO® Foamex 811 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 811 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam. | Request Sample |
| TEGO® Foamex 812 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 812 is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam. | Request Sample |
| TEGO® Foamex 8820 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 8820 is an effective bio-based defoamer concentrate based on organic polymer technology. It has broad food contact compliances with green and renewable contents. Free of silicone, solvent, and mineral oil. | Request Sample |
| TEGO® Protect 5100 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Protect 5100 N is an emulsion of a hydroxyfunctional polydimethylsiloxane. | Request Sample |
| TEGO® VariPlus AP | Evonik Operations GmbH, BL Coating Additives | 酮醛缩聚树脂，改善硬度、光泽并缩短干燥时间。 | Request Sample |
| TEGO® VariPlus DS 50 | Evonik Operations GmbH, BL Coating Additives | 这是一种聚氨酯多元醇树脂的阴离子乳液，可以增加颜料润湿和稳定性，并具有出色的耐水性 | Request Sample |
| ZetaSperse® 175 | Evonik Operations GmbH, BL Coating Additives | ZETASPERSE® 175 is a non-ionic wetting and dispersing additive with focus on pigment wetting. It shows outstanding color strength development when used as a co-dispersant to an anionic polymer. It improves color acceptance when used in the direct grind of...展开 ZETASPERSE® 175 is a non-ionic wetting and dispersing additive with focus on pigment wetting. It shows outstanding color strength development when used as a co-dispersant to an anionic polymer. It improves color acceptance when used in the direct grind of a base paint. 收起 | Request Sample |
