UL Prospector
Prospector
Company: Hess Pumice (NCS) Microfine Functional Fillers  Company: Hoten Chemical International Group  Company: Hengshui New Eastern Chemical Industry Co,. Ltd.  Company: Kuraray Europe GmbH 可乐丽  Company: Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部  Company: Burgess Pigment Company  Clear All 

成功!

成功保存搜索结果
155 条结果
AEPD™ VOX 1000 Multifunctional Neutralizer Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 AEPD™ VOX 1000中和胺能帮助您调配出零VOC(< 5克/升)的涂料，并不影响涂料本身的品质。它能够实现行业标杆产品AMP的全部功能，而且几乎没有任何气味。同时，和其他低VOC氨基醇相比，AEPD™ VOX 1000更为高效。 研磨时添加AEPD™ VOX 1000中和胺能够提高研磨分散的效率并降低分散剂的使用量。它的高沸点和低汽压使它特别适合于低VOC或零VOC涂料的调配，并且几乎完全去除胺类和氨气的气味。 推荐您在研磨和中和碱溶胀型增稠剂的调漆阶段使用本产品。
ALKATERGE®-E Nonvolatile Surface Active Agent Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性...展开 ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性皂与高级脂肪酸。这些盐和肥皂的润湿能力，经常可通过添加醇或二醇来增加。 ALKATERGE ® -E的盐溶液可以用作纸和纺织工业的渗透剂，并且在金属清洁剂配方中使用。 收起
ALKATERGE®-T Surface Active Agent Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对...展开 ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对性功能 收起
AMP™-75 Multifunctional Neutralizer Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配...展开 AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配方量）。 收起
AMP™-90 Multifunctional Neutralizer Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 AMP™-90多功能中和剂氨基醇是一种无色，流动的液体，具有多种用途，可用于金属加工液，油漆和涂料，锅炉水系统和个人护理产品中。它可作为胺用于树脂中和，作为助分散剂，甲醛清除剂，腐蚀抑制剂和作为原料进行合成。
AMP™-95 Multifunctional Neutralizer Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 AMP™-95 多功能中和剂是乳胶漆行业的旗舰标杆性产品。作为一款多功能胺类，AMP与其他胺相比，更能提高涂料的品质并增强涂料的性能。 AMP-95以其中和性能和多功能表现得到了全世界配方设计师的广泛信任。它可以作为一种共分散剂并为配方提供出色的涂膜性能。AMP-95带来的主要益处包括改进的pH稳定性，优异的耐擦洗性，理想的固色性能，以及更好的光泽和遮盖力。 同时，AMP共分散剂和中和胺能够减少抗冻融剂、开罐时间延长剂和分散剂的使用，从而减少涂料中所含的有机挥发物。
BURGESS 2211 Burgess Pigment Company BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...展开 BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS 30P® Burgess Pigment Company BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS 5178 Burgess Pigment Company BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...展开 BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS CB Burgess Pigment Company BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants.
BURGESS ICEBERG® Burgess Pigment Company BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...展开 BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. 收起
BURGESS ICECAP K® Burgess Pigment Company BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS ICECAP KSF Burgess Pigment Company BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely ...展开 BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely low 325 (45 micron) mesh residue. 收起
BURGESS KE Burgess Pigment Company BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...展开 BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS NO. 10 Burgess Pigment Company BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS.
BURGESS NO. 17 Burgess Pigment Company BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness.
BURGESS NO. 20 Burgess Pigment Company BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...展开 BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS NO. 27 Burgess Pigment Company BURGESS NO. 27 is an ultra fine particle size, medium brightness hydrous kaolin clay. This product is used as an extender in semigloss, satin, and gloss paints.
BURGESS NO. 28 Burgess Pigment Company BURGESS NO. 28 is an ultra fine particle size, higher brightness hydrous kaolin clay. This product is used to extend TiO2 while maintaining tint strength and gloss. It is used extensively in water based satin and semigloss coating systems.
BURGESS NO. 30® Burgess Pigment Company BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...展开 BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS NO. 40 Burgess Pigment Company BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives.
BURGESS NO. 50® Burgess Pigment Company BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...展开 BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. 收起
BURGESS NO. 60 Burgess Pigment Company BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS.
BURGESS NO. 97 Burgess Pigment Company BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints.
BURGESS NO. 98 Burgess Pigment Company BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss...展开 BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss paints. 收起
BURGESS OPTIPOZZ® Burgess Pigment Company BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants.
BURGESS OPTIWHITE® Burgess Pigment Company BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention...展开 BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention and hiding when embedded in coatings and polymers. It can provide excellent dispersion, high hiding, and improved film properties. 收起
BURGESS OPTIWHITE MX® Burgess Pigment Company BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...展开 BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. 收起
BURGESS OPTIWHITE P® Burgess Pigment Company BURGESS OPTIWHITE P® is a flash calcined clay used extensively to extend TiO2. This product exhibits GE Brightness, improves touchup, scrub, and burnish resistance. It is used in flat interior trade sales paints which do not require maximum whiteness.
BURGESS POLYCLAY Burgess Pigment Company BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks.
BURGESS THERMOGLACE H Burgess Pigment Company BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...展开 BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. 收起
CP-4104 MI Kuraray Europe GmbH 可乐丽 是一种聚乙烯醇，适用于熔融成型。基于特殊技术，粒状聚乙烯醇可通过常规塑料加工技术处理，例如吹塑、片材挤出和注塑成型
DMAMP-80™ Multifunctional Neutralizer Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 DMAMP - 80™多功能中和剂是一种中和胺，适合油漆、涂料和水处理中使用。它可以作为一种乳化剂、腐蚀抑制剂、树脂增溶剂、生产发泡体的催化剂和表面处理稳定剂，以及和化学合成的原料。
Enamel Grade Titanium Dioxide HTD-E Hoten Chemical International Group Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material.
EXCEVAL™ AQ-4104 Kuraray Europe GmbH 可乐丽 完全水解的水溶性乙烯基乙烯醇共聚物，兼具高耐水性和粘度稳定性
EXCEVAL™ HR-3010 Kuraray Europe GmbH 可乐丽 是一种超级水解等级的水溶性乙烯基乙烯醇共聚物，兼具高耐水性和粘度稳定性
EXCEVAL™ RS-1717 Kuraray Europe GmbH 可乐丽 一种新的水溶性聚合物，可提供良好的耐水性，其水溶液具有充分的粘度稳定性
EXCEVAL™ RS-2117 Kuraray Europe GmbH 可乐丽 一种新的水溶性聚合物，可提供良好的耐水性，其水溶液具有充分的粘度稳定性
FLEXITANE™ CA 6000 Specialty Coating Additive Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 FLEXITANE™ CA 6000 是一种多功能、高性能的硝基烷烃类特种涂料添加剂。通过添加该多功效的助剂，通常可以减少油漆中其它高剂量的特种助剂的使用，为实现高性能的油性漆提供有效的解决方案
HESS NCS-10 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-12 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-15 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-3 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-5 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-8 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HTM-A Barium Sulphate Modified Hoten Chemical International Group HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起
HTM-B Barium Sulphate Modified Hoten Chemical International Group HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起
HTM-C Barium Sulphate Modified Hoten Chemical International Group HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起
HTN-NO Barium Sulfate Natural Hoten Chemical International Group HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings.
HTN-NP Barium Sulfate Natural Hoten Chemical International Group HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures.
HTN-NQ Barium Sulfate Natural Hoten Chemical International Group HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures.
HTN-NR Barium Sulfate Natural Hoten Chemical International Group HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures.
HTN-NS Barium Sulfate Natural Hoten Chemical International Group HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures.
HTS-H Synthetic Barium Sulfate Hoten Chemical International Group HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起
HTS-L Synthetic Barium Sulfate Hoten Chemical International Group HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起
HTS-M Synthetic Barium Sulfate Hoten Chemical International Group HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起
KURARAY POLYOL C-1090 Kuraray Europe GmbH 可乐丽 是一种液体聚碳酸酯多元醇，可配合你的新项目：高端皮革涂料、耐化学品PU、低裂/低起霜硬涂膜、全新氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯
KURARAY POLYOL C-2090 Kuraray Europe GmbH 可乐丽 是一种液体聚碳酸酯多元醇，可配合你的新项目：高端皮革涂料、耐化学品PU、低裂/低起霜硬涂膜、全新氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯
KURARAY POLYOL C-3090 Kuraray Europe GmbH 可乐丽 是一种液体聚碳酸酯多元醇，可配合你的新项目：高端皮革涂料、耐化学品PU、低裂/低起霜硬涂膜、全新氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯
KURARAY POLYOL P-1010 Kuraray Europe GmbH 可乐丽 是一种低粘度、非晶态的聚酯多醇，可配合你的新项目：低/更低VOC的双组分PU、清漆&透明涂料、不含增塑剂的软TPU、柔韧的氨基甲酸酯丙烯酸酯和聚酯树脂改性
KURARAY POLYOL P-1011 Kuraray Europe GmbH 可乐丽 是一种液体聚酯多醇，可配合你的新项目：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯
KURARAY POLYOL P-1012 Kuraray Europe GmbH 可乐丽 是一种液体聚酯多醇，可配合你的新项目：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯
KURARAY POLYOL P-1020 Kuraray Europe GmbH 可乐丽 MPD对苯二酸酯的聚酯多醇，适用于：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯
KURARAY POLYOL P-2010 Kuraray Europe GmbH 可乐丽 是一种低粘度、非晶态的聚酯多醇，可配合你的新项目：低/更低VOC的双组分PU、清漆&透明涂料、不含增塑剂的软TPU、柔韧的氨基甲酸酯丙烯酸酯和聚酯树脂改性
KURARAY POLYOL P-2011 Kuraray Europe GmbH 可乐丽 是一种液体聚酯多醇，可配合你的新项目：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯
KURARAY POLYOL P-2012 Kuraray Europe GmbH 可乐丽 是一种液体聚酯多醇，可配合你的新项目：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯
KURARAY POLYOL P-2020 Kuraray Europe GmbH 可乐丽 是一种液体聚酯多醇，可配合你的新项目：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯
KURARAY POLYOL P-3010 Kuraray Europe GmbH 可乐丽 是一种低粘度、非晶态的聚酯多醇，可配合你的新项目：低/更低VOC的双组分PU、清漆&透明涂料、不含增塑剂的软TPU、柔韧的氨基甲酸酯丙烯酸酯和聚酯树脂改性
KURARAY POLYOL P-4010 Kuraray Europe GmbH 可乐丽 是一种低粘度、非晶态的聚酯多醇，可配合你的新项目：低/更低VOC的双组分PU、清漆&透明涂料、不含增塑剂的软TPU、柔韧的氨基甲酸酯丙烯酸酯和聚酯树脂改性
KURARAY POLYOL P-5010 Kuraray Europe GmbH 可乐丽 是一种低粘度、非晶态的聚酯多醇，可配合你的新项目：低/更低VOC的双组分PU、清漆&透明涂料、不含增塑剂的软TPU、柔韧的氨基甲酸酯丙烯酸酯和聚酯树脂改性
KURARAY POVAL® 10-98 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 10-98是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为9.0 - 11.0 mPa.s。
KURARAY POVAL® 13-88 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 13-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为11.5 - 14.5 mPa.s。
KURARAY POVAL® 15-99 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 15-99是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为12.5 - 17.5 mPa.s。
KURARAY POVAL® 17-94 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 17-94是消泡级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为14.5 - 18.5 mPa.s。
KURARAY POVAL® 18-88 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 18-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为16.5 - 19.8 mPa.s。
KURARAY POVAL® 18-88 S2 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 18-88 S2是精细粉末级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为16.5 - 19.8 mPa.s。
KURARAY POVAL® 20-98 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 30-98是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为28.0 - 32.0 mPa.s。
KURARAY POVAL® 22-88 S2 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 22-88 S2是精细粉末级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为20.5 - 24.5 mPa.s。
KURARAY POVAL® 22-88 SB Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 22-88 SB是消泡级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为20.5 - 24.5 mPa.s。
KURARAY POVAL® 23-88 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 23-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为21.5 - 24.5 mPa.s。
KURARAY POVAL® 23-88 S2 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 23-88 S2是精细粉末级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为21.5 - 24.5 mPa.s。
KURARAY POVAL® 25-88 KL Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 25-88 KL是精品级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为20.0 - 30.0 mPa.s。
KURARAY POVAL® 25-98 R Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 25-98 R是精品级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为20.0 - 30.0 mPa.s。
KURARAY POVAL® 26-80 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 26-80是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为21.0 - 31.0 mPa.s。
KURARAY POVAL® 26-88 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 26-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为24.5 - 27.5 mPa.s.。
KURARAY POVAL® 28-88 K Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 28-88 K是消泡级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为25.0 - 31.0 mPa.s。
KURARAY POVAL® 28-99 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 28-99是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为26.0 - 30.0 mPa.s。
KURARAY POVAL® 28-99 LA Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 28-99 LA是低灰级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为26.0 - 30.0 mPa.s。
KURARAY POVAL® 3-80 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 3-80是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为2.8 - 3.3 mPa.s。
KURARAY POVAL® 3-85 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 3-85是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为of 3.4 - 4.0 mPa.s。
KURARAY POVAL® 3-85 S4 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 3-85 S4是精细粉末级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为3.4 - 4.0 mPa.s。
KURARAY POVAL® 3-86 SD Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 3-86 SD是精品级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为2.4 - 3.40 mPa.s。
KURARAY POVAL® 3-88 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 3-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为of 3.2 - 3.6 mPa.s。
KURARAY POVAL® 3-98 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 3-98是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为3.2 - 3.8 mPa.s。
KURARAY POVAL® 30-75 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 30-75是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为28.0 - 33.0 mPa.s。
KURARAY POVAL® 30-92 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 30-92是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为28.0 - 32.0 mPa.s。
KURARAY POVAL® 30-98 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 30-98是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为28.0 - 32.0 mPa.s。
KURARAY POVAL® 32-80 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 32-80是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为29.0 - 35.0 mPa.s。
KURARAY POVAL® 32-88 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 32-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为30.0 - 34.0 mPa.s。
KURARAY POVAL® 4-88 Kuraray Europe GmbH 可乐丽 KURARAY POVAL® 4-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为3.5 - 4.5 mPa.s。