| AEPD™ VOX 1000 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AEPD™ VOX 1000中和胺能帮助您调配出零VOC(< 5克/升)的涂料，并不影响涂料本身的品质。它能够实现行业标杆产品AMP的全部功能，而且几乎没有任何气味。同时，和其他低VOC氨基醇相比，AEPD™ VOX 1000更为高效。 研磨时添加AEPD™ VOX 1000中和胺能够提高研磨分散的效率并降低分散剂的使用量。它的高沸点和低汽压使它特别适合于低VOC或零VOC涂料的调配，并且几乎完全去除胺类和氨气的气味。 推荐您在研磨和中和碱溶胀型增稠剂的调漆阶段使用本产品。 | |
| ALKATERGE®-E Nonvolatile Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性...展开 ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性皂与高级脂肪酸。这些盐和肥皂的润湿能力，经常可通过添加醇或二醇来增加。 ALKATERGE ® -E的盐溶液可以用作纸和纺织工业的渗透剂，并且在金属清洁剂配方中使用。 收起 | |
| ALKATERGE®-T Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对...展开 ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对性功能 收起 | |
| AMP™-75 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配...展开 AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配方量）。 收起 | |
| AMP™-90 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-90多功能中和剂氨基醇是一种无色，流动的液体，具有多种用途，可用于金属加工液，油漆和涂料，锅炉水系统和个人护理产品中。它可作为胺用于树脂中和，作为助分散剂，甲醛清除剂，腐蚀抑制剂和作为原料进行合成。 | |
| AMP™-95 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-95 多功能中和剂是乳胶漆行业的旗舰标杆性产品。作为一款多功能胺类，AMP与其他胺相比，更能提高涂料的品质并增强涂料的性能。 AMP-95以其中和性能和多功能表现得到了全世界配方设计师的广泛信任。它可以作为一种共分散剂并为配方提供出色的涂膜性能。AMP-95带来的主要益处包括改进的pH稳定性，优异的耐擦洗性，理想的固色性能，以及更好的光泽和遮盖力。 同时，AMP共分散剂和中和胺能够减少抗冻融剂、开罐时间延长剂和分散剂的使用，从而减少涂料中所含的有机挥发物。 | |
| CP-4104 MI | Kuraray Europe GmbH 可乐丽 | 是一种聚乙烯醇，适用于熔融成型。基于特殊技术，粒状聚乙烯醇可通过常规塑料加工技术处理，例如吹塑、片材挤出和注塑成型 | |
| DMAMP-80™ Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | DMAMP - 80™多功能中和剂是一种中和胺，适合油漆、涂料和水处理中使用。它可以作为一种乳化剂、腐蚀抑制剂、树脂增溶剂、生产发泡体的催化剂和表面处理稳定剂，以及和化学合成的原料。 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| EXCEVAL™ AQ-4104 | Kuraray Europe GmbH 可乐丽 | 完全水解的水溶性乙烯基乙烯醇共聚物，兼具高耐水性和粘度稳定性 | |
| EXCEVAL™ HR-3010 | Kuraray Europe GmbH 可乐丽 | 是一种超级水解等级的水溶性乙烯基乙烯醇共聚物，兼具高耐水性和粘度稳定性 | |
| EXCEVAL™ RS-1717 | Kuraray Europe GmbH 可乐丽 | 一种新的水溶性聚合物，可提供良好的耐水性，其水溶液具有充分的粘度稳定性 | |
| EXCEVAL™ RS-2117 | Kuraray Europe GmbH 可乐丽 | 一种新的水溶性聚合物，可提供良好的耐水性，其水溶液具有充分的粘度稳定性 | |
| FLEXITANE™ CA 6000 Specialty Coating Additive | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | FLEXITANE™ CA 6000 是一种多功能、高性能的硝基烷烃类特种涂料添加剂。通过添加该多功效的助剂，通常可以减少油漆中其它高剂量的特种助剂的使用，为实现高性能的油性漆提供有效的解决方案 | |
| Greesol™ A04 A | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Ethylhexanol solvent based product. 收起 | |
| Greesol™ A04 BC | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Butoxylethanol solvent based product. 收起 | |
| Greesol™ A04 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Dipropandiol monomethanol ether solvent based product. 收起 | |
| Greesol™ A04 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Ethandiol solvent based product. 收起 | |
| Greesol™ A04 NP | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propanol solvent based product. 收起 | |
| Greesol™ A04 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Isopropanol solvent based product. 收起 | |
| Greesol™ A04 PG | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propandiol solvent based product. 收起 | |
| Greesol™ A04 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive and paint and dye manufacturing. It is a solvent based product according to user needs. 收起 | |
| Greesol™ A06 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, an...展开 Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, a...展开 Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. The dipropylene glycol monomethyl ether percentage can be customized per request. 收起 | |
| Greesol™ ASE | Chem Additive (YueYang) Co.,Ltd. | Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic c...展开 Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV and laminating adhesives. 收起 | |
| Greesol™ DF11 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks...展开 Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks, intaglio inks, OPV, and laminating adhesives. 收起 | |
| Greesol™ DF42 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF42 is a silica-based defoamer. This miscible product is well suited for use in paints, inks, emulsion polymerization processes, and adhesive foam control. | |
| Greesol™ DF901 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, a...展开 Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ DF975 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF975 is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 100%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. | |
| Greesol™ DFM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DFM is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 60%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, OPV. | |
| Greesol™ DP1600 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DP1600 is a wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has anionic and non-ionic properties. This product has a low viscosity and is suitable for carbon black and organic pigment dispersion. Its ...展开 Greesol™ DP1600 is a wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has anionic and non-ionic properties. This product has a low viscosity and is suitable for carbon black and organic pigment dispersion. Its active ingredient content is 80%. 收起 | |
| Greesol™ DPB | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DPB is a non-ionic class wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has a Low viscosity and is suitable for carbon black and organic pigment dispersion. Its active ingredient content is 100% | |
| Greesol™ E20 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E20 is a multifunctional surfactant and gemini nonionic surfactant containing 20% of ethylene oxide. It is widely applied to waterborne printing ink. This product is well suit for use in fountain solutions for offset printing applications. This p...展开 Greesol™ E20 is a multifunctional surfactant and gemini nonionic surfactant containing 20% of ethylene oxide. It is widely applied to waterborne printing ink. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ E40 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well su...展开 Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ E65 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E65 is a multifunctional surfactant and gemini nonionic surfactant containing 65% of ethylene oxide and has wetting, defoaming, flow and leveling capabilities. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. T...展开 Greesol™ E65 is a multifunctional surfactant and gemini nonionic surfactant containing 65% of ethylene oxide and has wetting, defoaming, flow and leveling capabilities. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can also be use as a gloss agent in a electroplating and pickling solution. 收起 | |
| Greesol™ E85 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E85 is a multifunctional surfactant and gemini nonionic surfactant containing 85% of ethylene oxide. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can be also be used as a gloss agent in a elect...展开 Greesol™ E85 is a multifunctional surfactant and gemini nonionic surfactant containing 85% of ethylene oxide. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can be also be used as a gloss agent in a electroplating and pickling solution. 收起 | |
| Greesol™ F06 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, a...展开 Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. 收起 | |
| Greesol™ F07 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F07 surfactant is a gemini low-foam nonionic wetting agent. It can reduce static surface tension and dynamic surface tension to promote the wetting of base materials of many waterborne systems. This product can be used in the production of waterb...展开 Greesol™ F07 surfactant is a gemini low-foam nonionic wetting agent. It can reduce static surface tension and dynamic surface tension to promote the wetting of base materials of many waterborne systems. This product can be used in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. 收起 | |
| Greesol™ FS85 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ FS85 surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems and is specially developed for fountain solutions with little to no alcohol content. This product is suit...展开 Greesol™ FS85 surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems and is specially developed for fountain solutions with little to no alcohol content. This product is suitable for use in commercial printing presses, and been shown to be effective in clear edge of printing dots and does not cause excessive ink emulsion in ink jet inks. 收起 | |
| Greesol™ LE5 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, w...展开 Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE7 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production o...展开 Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE8 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The con...展开 Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| KURARAY POLYOL C-1090 | Kuraray Europe GmbH 可乐丽 | 是一种液体聚碳酸酯多元醇，可配合你的新项目：高端皮革涂料、耐化学品PU、低裂/低起霜硬涂膜、全新氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯 | |
| KURARAY POLYOL C-2090 | Kuraray Europe GmbH 可乐丽 | 是一种液体聚碳酸酯多元醇，可配合你的新项目：高端皮革涂料、耐化学品PU、低裂/低起霜硬涂膜、全新氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯 | |
| KURARAY POLYOL C-3090 | Kuraray Europe GmbH 可乐丽 | 是一种液体聚碳酸酯多元醇，可配合你的新项目：高端皮革涂料、耐化学品PU、低裂/低起霜硬涂膜、全新氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯 | |
| KURARAY POLYOL P-1010 | Kuraray Europe GmbH 可乐丽 | 是一种低粘度、非晶态的聚酯多醇，可配合你的新项目：低/更低VOC的双组分PU、清漆&透明涂料、不含增塑剂的软TPU、柔韧的氨基甲酸酯丙烯酸酯和聚酯树脂改性 | |
| KURARAY POLYOL P-1011 | Kuraray Europe GmbH 可乐丽 | 是一种液体聚酯多醇，可配合你的新项目：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯 | |
| KURARAY POLYOL P-1012 | Kuraray Europe GmbH 可乐丽 | 是一种液体聚酯多醇，可配合你的新项目：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯 | |
| KURARAY POLYOL P-1020 | Kuraray Europe GmbH 可乐丽 | MPD对苯二酸酯的聚酯多醇，适用于：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯 | |
| KURARAY POLYOL P-2010 | Kuraray Europe GmbH 可乐丽 | 是一种低粘度、非晶态的聚酯多醇，可配合你的新项目：低/更低VOC的双组分PU、清漆&透明涂料、不含增塑剂的软TPU、柔韧的氨基甲酸酯丙烯酸酯和聚酯树脂改性 | |
| KURARAY POLYOL P-2011 | Kuraray Europe GmbH 可乐丽 | 是一种液体聚酯多醇，可配合你的新项目：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯 | |
| KURARAY POLYOL P-2012 | Kuraray Europe GmbH 可乐丽 | 是一种液体聚酯多醇，可配合你的新项目：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯 | |
| KURARAY POLYOL P-2020 | Kuraray Europe GmbH 可乐丽 | 是一种液体聚酯多醇，可配合你的新项目：强效胶粘剂助剂、韧性高但软的PU、新型氨基甲酸酯乳液和柔韧的氨基甲酸酯丙烯酸酯 | |
| KURARAY POLYOL P-3010 | Kuraray Europe GmbH 可乐丽 | 是一种低粘度、非晶态的聚酯多醇，可配合你的新项目：低/更低VOC的双组分PU、清漆&透明涂料、不含增塑剂的软TPU、柔韧的氨基甲酸酯丙烯酸酯和聚酯树脂改性 | |
| KURARAY POLYOL P-4010 | Kuraray Europe GmbH 可乐丽 | 是一种低粘度、非晶态的聚酯多醇，可配合你的新项目：低/更低VOC的双组分PU、清漆&透明涂料、不含增塑剂的软TPU、柔韧的氨基甲酸酯丙烯酸酯和聚酯树脂改性 | |
| KURARAY POLYOL P-5010 | Kuraray Europe GmbH 可乐丽 | 是一种低粘度、非晶态的聚酯多醇，可配合你的新项目：低/更低VOC的双组分PU、清漆&透明涂料、不含增塑剂的软TPU、柔韧的氨基甲酸酯丙烯酸酯和聚酯树脂改性 | |
| KURARAY POVAL® 10-98 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 10-98是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为9.0 - 11.0 mPa.s。 | |
| KURARAY POVAL® 13-88 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 13-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为11.5 - 14.5 mPa.s。 | |
| KURARAY POVAL® 15-99 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 15-99是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为12.5 - 17.5 mPa.s。 | |
| KURARAY POVAL® 17-94 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 17-94是消泡级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为14.5 - 18.5 mPa.s。 | |
| KURARAY POVAL® 18-88 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 18-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为16.5 - 19.8 mPa.s。 | |
| KURARAY POVAL® 18-88 S2 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 18-88 S2是精细粉末级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为16.5 - 19.8 mPa.s。 | |
| KURARAY POVAL® 20-98 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 30-98是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为28.0 - 32.0 mPa.s。 | |
| KURARAY POVAL® 22-88 S2 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 22-88 S2是精细粉末级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为20.5 - 24.5 mPa.s。 | |
| KURARAY POVAL® 22-88 SB | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 22-88 SB是消泡级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为20.5 - 24.5 mPa.s。 | |
| KURARAY POVAL® 23-88 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 23-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为21.5 - 24.5 mPa.s。 | |
| KURARAY POVAL® 23-88 S2 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 23-88 S2是精细粉末级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为21.5 - 24.5 mPa.s。 | |
| KURARAY POVAL® 25-88 KL | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 25-88 KL是精品级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为20.0 - 30.0 mPa.s。 | |
| KURARAY POVAL® 25-98 R | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 25-98 R是精品级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为20.0 - 30.0 mPa.s。 | |
| KURARAY POVAL® 26-80 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 26-80是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为21.0 - 31.0 mPa.s。 | |
| KURARAY POVAL® 26-88 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 26-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为24.5 - 27.5 mPa.s.。 | |
| KURARAY POVAL® 28-88 K | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 28-88 K是消泡级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为25.0 - 31.0 mPa.s。 | |
| KURARAY POVAL® 28-99 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 28-99是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为26.0 - 30.0 mPa.s。 | |
| KURARAY POVAL® 28-99 LA | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 28-99 LA是低灰级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为26.0 - 30.0 mPa.s。 | |
| KURARAY POVAL® 3-80 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 3-80是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为2.8 - 3.3 mPa.s。 | |
| KURARAY POVAL® 3-85 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 3-85是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为of 3.4 - 4.0 mPa.s。 | |
| KURARAY POVAL® 3-85 S4 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 3-85 S4是精细粉末级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为3.4 - 4.0 mPa.s。 | |
| KURARAY POVAL® 3-86 SD | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 3-86 SD是精品级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为2.4 - 3.40 mPa.s。 | |
| KURARAY POVAL® 3-88 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 3-88是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为of 3.2 - 3.6 mPa.s。 | |
| KURARAY POVAL® 3-98 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 3-98是完全皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为3.2 - 3.8 mPa.s。 | |
| KURARAY POVAL® 30-75 | Kuraray Europe GmbH 可乐丽 | KURARAY POVAL® 30-75是部分皂化级聚乙烯醇。它以一定晶粒尺寸的精细粉末/颗粒形式供货。KURARAY POVAL®推荐用于多种用途，包括作为乳化聚合助剂或纸张用颜料的基料。这款产品的粘度为28.0 - 33.0 mPa.s。 |
