| BAL 101 H WS-70 | Bonyan Kala Chemie Co. | BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and g...展开 BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 101 L WS-70 | Bonyan Kala Chemie Co. | BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and ...展开 BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 102 WS-70 | Bonyan Kala Chemie Co. | BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in...展开 BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in architectural and industrial varnishes. 收起 | |
| BAL 103 WS-70 | Bonyan Kala Chemie Co. | BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood...展开 BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 104 WS-70 | Bonyan Kala Chemie Co. | BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-c...展开 BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-corrosion and anti-rust primers. 收起 | |
| BAL 106 H WS-70 | Bonyan Kala Chemie Co. | BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural,...展开 BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 106 L WS-70 | Bonyan Kala Chemie Co. | BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal...展开 BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, spray paints, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 108 WS-70 | Bonyan Kala Chemie Co. | BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood...展开 BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 116 WS-70 | Bonyan Kala Chemie Co. | BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood,...展开 BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 118 WS-70 | Bonyan Kala Chemie Co. | BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coa...展开 BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 120 WS-70 | Bonyan Kala Chemie Co. | BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coating...展开 BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...展开 BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. 收起 | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...展开 BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. 收起 | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...展开 BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 收起 | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...展开 BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. 收起 | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...展开 BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. 收起 | |
| BAS 302 X-60 | Bonyan Kala Chemie Co. | BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...展开 BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. 收起 | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...展开 BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 收起 | |
| BAS 307 X-60 | Bonyan Kala Chemie Co. | BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...展开 BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. 收起 | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...展开 BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...展开 BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...展开 BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...展开 BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BD-Ca-5 | Bonyan Kala Chemie Co. | BD-Ca-5 is a drier that appears as a clear yellow liquid. This product is an auxiliary drier and has a metal content of 5±0.2. It is often used for air through and surface drying systems. | |
| BD-Co-10 | Bonyan Kala Chemie Co. | BD-Co-10 is a drier that appears as a violet liquid. This product is an active oxidation drier and has a metal content of 10±0.2. It is often used as an accelerator for unsaturated polyester resins and in air drying systems. | |
| BD-Pb-32 | Bonyan Kala Chemie Co. | BD-Pb-32 is a drier that appears as a clear yellow liquid. This product is a through drier and has a metal content of 32±0.5. It is often used for air through and surface drying systems. | |
| BD-Zr-18 | Bonyan Kala Chemie Co. | BD-Zr-18 is a drier that appears as a light yellow liquid. This product is a through drier and has a metal content of 18±0.3. It is often used in air drying systems, metallic paints, metallic varnishes and coatings. | |
| BUP 612 | Bonyan Kala Chemie Co. | BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a ...展开 BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 550-750CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 615 | Bonyan Kala Chemie Co. | BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in ...展开 BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 620 | Bonyan Kala Chemie Co. | BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a visc...展开 BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 400-650CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 621 | Bonyan Kala Chemie Co. | BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity...展开 BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 623 | Bonyan Kala Chemie Co. | BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a v...展开 BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a viscosity of 500-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 624 | Bonyan Kala Chemie Co. | BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP ...展开 BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 625 | Bonyan Kala Chemie Co. | BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly use...展开 BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 626 | Bonyan Kala Chemie Co. | BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of ...展开 BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 450-650CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 629 | Bonyan Kala Chemie Co. | BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...展开 BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 630 | Bonyan Kala Chemie Co. | BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...展开 BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 631 | Bonyan Kala Chemie Co. | BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product ha...展开 BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 640 | Bonyan Kala Chemie Co. | BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C a...展开 BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 643 | Bonyan Kala Chemie Co. | BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and...展开 BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 660 | Bonyan Kala Chemie Co. | BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 600-900CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 665 | Bonyan Kala Chemie Co. | BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 800-1200CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 690 | Bonyan Kala Chemie Co. | BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and ...展开 BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and is commonly used in general purpose applications. 收起 | |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...展开 EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. 收起 | |
| EcoFlame B-543 | Unibrom Corp. | EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, fou...展开 EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, found in most electrical appliances. It is also used as an intermediate, to make other flame retardants, and brominated carbon/carbonate oligomers (that use TBBA as a raw material) are used to flame retard thermoplastic resin systems such as certain grades of polycarbonate (PC) and polybutylene terephthalate (PBT). EcoFlame B-543 has a molecular weight of 543.7, a moisture percent of 0.2 max, a melting point of 179 min, and an organic bromide of 58 min. 收起 | |
| EcoFlame B-641 | Unibrom Corp. | EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...展开 EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. 收起 | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...展开 EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. 收起 | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...展开 EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. 收起 | |
| EcoFlame B-959 | Unibrom Corp. | EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, bu...展开 EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| Titanium Dioxide Anatase | Hoten Chemical International Group | Titanium Dioxide Anatase is a white powder derived from titanium concentrates and sulfuric acid. This anatase titanium dioxide pigment can provide whiteness, gloss, and high intensity in paints, coatings, and printing inks. | |
| Titanium Dioxide Rutile for Paint Industry HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting ...展开 Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing inks. 收起 | |
| Titanium Dioxide Rutile HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durabilit...展开 Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing ink. 收起 |
