| RHEOBYK-405 | BYK 毕克 | 用于溶剂型体系的触变添加剂。最适合用于基于聚酯、丙烯酸和醇酸树脂，含气相二氧化硅的涂料。气相二氧化硅必须具备至少部分的亲水性。 | |
| RHEOBYK-410 | BYK 毕克 | 用于溶剂型和无溶剂型涂料的液态流变添加剂。使用后可在体系内形成一种假塑性，其触变型流动特性可以防止沉淀和流挂。可以后添加，使用简便。 | |
| RHEOBYK-411 | BYK 毕克 | 用于溶剂型和无溶剂型涂料的液态流变添加剂。使用后可在体系内形成一种假塑性，其触变型流动特性可以防止沉淀和流挂。由于产品呈液态，因而使用简便。 | |
| RHEOBYK-415 | BYK 毕克 | RHEOBYK-415 is a liquid rheology additive for solvent-borne baking coatings and forced drying systems to improve anti-sagging properties. It works together with the binder and builds a three-dimensional network via hydrogen bonds and van der Waals forces....展开 RHEOBYK-415 is a liquid rheology additive for solvent-borne baking coatings and forced drying systems to improve anti-sagging properties. It works together with the binder and builds a three-dimensional network via hydrogen bonds and van der Waals forces. In addition to the dosage level and the polarity of the system, the degree of disentanglement of the higher molecular weight additive is key to the effectiveness. The higher molecular weight and the more pronounced pseudoplastic flow behavior are the reasons for the more temperature-stable viscosity behavior of RHEOBYK-415, even at higher drying temperatures. 收起 | |
| RHEOBYK-420 | BYK 毕克 | 用于水性涂料和颜料浓缩浆的液体流变助剂，加入后能形成三维网络，这样形成的触变流动性防止沉降和改善流挂性，应加入到研磨基料中。 | |
| RHEOBYK-425 | BYK 毕克 | 用于水性涂料和浓缩颜料的液态流变添加剂。适用于水性和水稀释性体系。该添加剂可产生一种假塑性的流动特性，可以提高抗流挂性和抗沉淀性。不含VOC及APEO。与多种水性树脂体系有广泛的相容性。 | |
| RHEOBYK-430 | BYK 毕克 | 用于溶剂型体系(重型、防护型、抗腐蚀和一般工业涂料)的液态触变控制添加剂。 | |
| RHEOBYK-431 | BYK 毕克 | 用于溶剂型体系的液态触变控制添加剂。 | |
| RHEOBYK-440 | BYK 毕克 | RHEOBYK-440 is a liquid rheology additive based on a polyamide to improve the anti-sagging and anti-settling properties as well as the effect pigment orientation in aqueous coating systems. Extremely shear-thinning. | |
| RHEOBYK-7405 | BYK 毕克 | RHEOBYK-7405 is an aromatic- and tin-free rheology additive for solvent-free and solvent-borne systems to enhance the rheological properties in conjunction with organophilic phyllosilicates and hydrophilic fumed silica. | |
| RHEOBYK-7410 CA | BYK 毕克 | RHEOBYK-7410 CA is a liquid rheology additive to produce a highly thixotropic flow behavior for medium-polar solvent-borne and solvent-free systems. | |
| RHEOBYK-7410 ET | BYK 毕克 | RHEOBYK-7410 ET is a liquid rheology additive to generate highly thixotropic flow behavior for medium-polarity solvent-borne and solvent-free systems. | |
| RHEOBYK-7411 CA | BYK 毕克 | RHEOBYK-7411 CA is a liquid rheology additive for low-polarity solvent-borne and solvent-free systems to produce a highly thixotropic flow behavior and to improve anti-sagging and anti-settling properties. | |
| RHEOBYK-7411 ES | BYK 毕克 | RHEOBYK-7411 ES is a liquid rheology additive for low-polarity solvent-borne and solvent-free coating systems and cleaning products to generate highly thixotropic flow behavior and to improve the anti-sagging and anti-settling properties. | |
| RHEOBYK-7420 CA | BYK 毕克 | RHEOBYK-7420 CA is a liquid rheology additive to produce thixotropic flow behavior in aqueous and highly polar systems for improving anti-sagging and anti-settling properties. | |
| RHEOBYK-7420 ES | BYK 毕克 | RHEOBYK-7420 ES is a liquid rheology additive to generate thixotropic flow behavior in aqueous and highly polar systems to improve the anti-sagging and anti-settling properties. | |
| RHEOBYK-7420 ET | BYK 毕克 | RHEOBYK-7420 ET is a liquid rheology additive to generate thixotropic flow behavior in aqueous and highly polar systems to improve the anti-sagging and anti-settling properties. | |
| RHEOBYK-7502 | BYK 毕克 | RHEOBYK-7502 is an organic rheology additive in powder form for increasing the stability of single component, silane-modified prepolymer systems, epoxy systems, and alkyd-based coating systems. | |
| RHEOBYK-7503 | BYK 毕克 | RHEOBYK-7503 is an organic rheology additive in powder form for increasing the stability of single component, silane-modified prepolymer systems, epoxy systems, and alkyd-based coating systems. | |
| RHEOBYK-7590 | BYK 毕克 | RHEOBYK-7590 is a powdered rheology additive for non-polar solvent-borne systems, powder coatings, adhesives and sealants. It is suitable for systems based on aliphatic non-polar solvents. The main fields of application are alkyd resin coatings such as ar...展开 RHEOBYK-7590 is a powdered rheology additive for non-polar solvent-borne systems, powder coatings, adhesives and sealants. It is suitable for systems based on aliphatic non-polar solvents. The main fields of application are alkyd resin coatings such as architectural coatings, glazes and general industrial coatings as well as protective coatings. 收起 | |
| RHEOBYK-7591 | BYK 毕克 | RHEOBYK-7591 is a rheology and processing additive for powder coatings particularly suitable for use in powder coating systems, and in this segment it is broadly compatible with various binders. | |
| RHEOBYK-7600 | BYK 毕克 | RHEOBYK-7600 is a VOC-, APEO- and tin-free associative thickener (HEUR) for aqueous systems, to generate a highly pseudoplastic flow behavior. | |
| RHEOBYK-7610 | BYK 毕克 | RHEOBYK-7610 is a VOC-, APEO- and tin-free associative thickener for aqueous systems, to generate a highly pseudoplastic flow behavior. | |
| RHEOBYK-D 410 | BYK 毕克 | RHEOBYK-D 410 is a liquid rheology additive for medium-polarity solvent-borne and solvent-free systems to generate highly thixotropic flow behavior. After being stirred into the coating system, the additive generates a three-dimensional network structure....展开 RHEOBYK-D 410 is a liquid rheology additive for medium-polarity solvent-borne and solvent-free systems to generate highly thixotropic flow behavior. After being stirred into the coating system, the additive generates a three-dimensional network structure. The resulting thixotropic flow behavior is highly suited for preventing sedimentation and increasing the anti-sagging properties without impairing leveling. 收起 | |
| RHEOBYK-D 420 | BYK 毕克 | RHEOBYK-D 420 is a liquid rheology additive for aqueous systems to generate thixotropic flow behavior. It is preferably used as an anti-settling additive to produce aqueous pigment, filler and matting agent concentrates. The additive's excellent shear thi...展开 RHEOBYK-D 420 is a liquid rheology additive for aqueous systems to generate thixotropic flow behavior. It is preferably used as an anti-settling additive to produce aqueous pigment, filler and matting agent concentrates. The additive's excellent shear thinning effect is advantageous for dosing such concentrates because of their low viscosity. In addition, it is suitable for controlling the thixotropic flow behavior and for optimizing the anti-sagging properties and leveling. 收起 | |
| RHEOBYK-H 3300 VF | BYK 毕克 | OPTIFLO® H3300 VF是不含VOC的聚合物溶液，用于产生低剪切粘度。它是一种疏水改性的非离子型聚合物水溶液，通常被称为缔合增稠剂。使用OPTIFLO® H3300 VF将通过产生低剪切粘度增加体粘度，对高剪切粘度具有一定的影响。 | |
| RHEOBYK-H 6500 VF | BYK 毕克 | OPTIFLO® H6500 VF是疏水改性的非离子型聚合物水溶液，通常被称为缔合增稠剂。它不含VOC和不含APEO。使用本产品会增加低剪切流变，如Stormer粘度，并改善流挂控制和一些高剪切或ICI粘度。 | |
| RHEOBYK-H 7500 VF | BYK 毕克 | OPTIFLO® H7500 VF 是一种HEUR基非离子型缔合增稠剂，其目的是用作水性油漆和涂料的增稠剂。它主要是用来产生KU或中等剪切粘度和流挂控制，用于难增稠体系如VAE、VaVEOVA和乙烯基丙烯酸胶乳体系。它相比传统HEUR基聚合物可采用较低使用量，由于它可与这些低VOC基料如VAE体系形成强相互作用。该产品比常规系统高效达25％。常见的应用包括水性油漆和涂料、工业涂料、水性胶黏剂、乳液基胶黏剂、屋顶涂料、封泥和密封化合物。 | |
| RHEOBYK-H 7625 VF | BYK 毕克 | RHEOBYK-H 7625 VF is a VOC-, APEO- and tin-free associative thickener (HEUR) for aqueous systems to generate highly pseudoplastic flow behavior. It dramatically increases viscosity in the low shear range. It reduces the sagging tendency and increases stor...展开 RHEOBYK-H 7625 VF is a VOC-, APEO- and tin-free associative thickener (HEUR) for aqueous systems to generate highly pseudoplastic flow behavior. It dramatically increases viscosity in the low shear range. It reduces the sagging tendency and increases storage stability. The additive is liquid and therefore easy to handle. It is not necessary to adjust the pH value or control the temperature during incorporation. Combining with rheology additives that are effective in the same high shear range as the RHEOBYK-L/T series, results in optimum processability. 收起 | |
| RHEOBYK-HV 80 | BYK 毕克 | OPTIFLO® HV80是疏水改性的碱溶性乳液聚合物，可有效用于水性建筑和工业水性涂料，产生高Stormer（KU）和ICI粘度。使用本产品提供了一种经济有效的方法，为平光，缎光和半光配方生成流变性能。 | |
| RHEOBYK-L 1400 VF | BYK 毕克 | OPTIFLO® L1400是疏水改性的非离子聚合物水溶液，通常被称为缔合增稠剂。本产品设计用于厚乳液（乳胶）油漆。它可用于丙烯酸、苯乙烯/丙烯酸和乙酸乙烯酯共聚物胶乳。 | |
| RHEOBYK-M 2600 VF | BYK 毕克 | OPTIFLO® M2600 VF是一种非离子型，疏水改性聚合物，特别适用于乳液涂料和水性涂料体系的增稠。它可用于各种乳液，例如苯乙烯丙烯酸酯、纯丙烯酸酯、聚醋酸乙烯酯、聚氨酯和其它，以及醇酸树脂和环氧乳液。使用本产品不会给涂料增加VOC溶剂，并改善耐起泡性能。它也可显著增加表观粘度，提供极佳的流动和流平性，一遍涂覆即可产生更高的涂膜厚度，并在施工过程中减少飞溅。 | |
| RHEOBYK-R 607 | BYK 毕克 | BYK-R 607是一种流变助剂，用于非溶剂和溶剂型体系，可结合亲水性气相二氧化硅和粘土添加剂使用，提高流变性能。它使亲水性气相法二氧化硅或粘土添加剂可以单独使用于双组分环氧体系。当使用BYK-R 607，没有必要使用环氧树脂中疏水性气相法二氧化硅和固化剂中亲水性气相法二氧化硅，以获取非常高的膜厚。此产品推荐用于环氧树脂体系、聚氨酯体系、丙烯酸酯体系、防护涂料和一般工业涂料。 | |
| RHEOBYK-T 1000 VF | BYK 毕克 | OPTIFLO T1000是疏水改性的非离子型聚合物水溶液，通常被称为缔合增稠剂。它可高效增加ICI或高剪切粘度，不含VOC和在溶液中粘度低。使用本产品将通过产生高剪切粘度提高成膜性，低剪切粘度下影响微乎其微。 | |
| RHEOBYK-T 1010 VF | BYK 毕克 | RHEOBYK-T 1010 VF is a VOC-free associative thickener (HEUR) for aqueous systems to generate Newtonian flow behavior. It is preferably used in emulsion paints and coatings that are based on acrylics, styrene acrylics and vinyl acetate copolymer binders as...展开 RHEOBYK-T 1010 VF is a VOC-free associative thickener (HEUR) for aqueous systems to generate Newtonian flow behavior. It is preferably used in emulsion paints and coatings that are based on acrylics, styrene acrylics and vinyl acetate copolymer binders as well as PU and alkyd emulsions. It is also well suited for aqueous wood and furniture coatings based on PU, acrylics and UV-curing systems. 收起 | |
| Titanium Dioxide Anatase | Hoten Chemical International Group | Titanium Dioxide Anatase is a white powder derived from titanium concentrates and sulfuric acid. This anatase titanium dioxide pigment can provide whiteness, gloss, and high intensity in paints, coatings, and printing inks. | |
| Titanium Dioxide Rutile for Paint Industry HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting ...展开 Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing inks. 收起 | |
| Titanium Dioxide Rutile HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durabilit...展开 Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing ink. 收起 | |
| VISCOBYK®-4041 | BYK 毕克 | PVC塑料溶胶的降粘剂。它是一种脂肪族碳氢化合物，含有中性的润湿和分散组分 | |
| WLZn-1000 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-1000 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 2-4. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-120 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-120 is a low-lead, zinc powder that appears as a gray powder. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-1500 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-1500 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 1-3. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-200 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-200 is a low-lead, zinc powder that appears as a gray powder. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-325 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-325 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 7-9. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-400 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-400 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 6-8. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-500 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-500 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 5-7. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-600 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-600 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 4-6. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-80 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-80 is a low-lead, zinc powder that appears as a gray powder with a nominal particle size of 80 mesh. This product can be used in a variety of coating applications. | |
| WLZn-800 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-800 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 3-5. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. |
