| #249 HI-TECH | PCI Group, Inc. | #249 HI-TECH is a clear blend of Alkyl-Aryl modified silicones. It is designed for high solids coating systems to improve mar resistance without the standard recoat problems. Designed for use in virtually all high solids solvent-borne systems. | |
| 901-GDA-2 | PCI Group, Inc. | 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide,...展开 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide, polyester and urethane for pigmented and non-pigmented systems. 收起 | |
| 941 LBA | PCI Group, Inc. | 941 LBA is a clear, linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums. It provides higher brightness, controlled uniformity and burnishing and helps prevent “black” float. | |
| AMA | PCI Group, Inc. | AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clea...展开 AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clear topcoats. 收起 | |
| AMAFCA | PCI Group, Inc. | AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip,...展开 AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip, conventional and airless spray systems. 收起 | |
| AMMA | PCI Group, Inc. | AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acryl...展开 AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acrylic resins, alkyds, epoxy, melamine, phenolic, polyamide, polyester, urea and urethane. 收起 | |
| APACA | PCI Group, Inc. | APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gl...展开 APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gloss, slip and mar resistance. 收起 | |
| ASAFA | PCI Group, Inc. | ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float ...展开 ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float while sharpening gloss, improving pigment wetting and enhancing leveling. 收起 | |
| ASAFA #3 | PCI Group, Inc. | ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epox...展开 ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epoxies, vinyls and most oleo-resinous non-aqueous systems. 收起 | |
| ASAFAMA | PCI Group, Inc. | ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and i...展开 ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and improves mar resistance without recoating problems. 收起 | |
| ASASWA | PCI Group, Inc. | ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows ...展开 ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows for enhanced pigment wetting and color development and eliminates hard settling. 收起 | |
| ASLA | PCI Group, Inc. | ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester ...展开 ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester and urethane pigmented and non-pigmented systems. 收起 | |
| C-485-FBRA | PCI Group, Inc. | C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve ...展开 C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve leveling and slip. 收起 | |
| CHEM-REZ A-1050 | PCI Group, Inc. | CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and...展开 CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and is useful in dip and flow coater systems. 收起 | |
| CLAWB | PCI Group, Inc. | CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. W...展开 CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. Waterborne coating formulations using CLAWB show improved solvent, impact and mar resistance, superior wet and dry adhesion, gloss retention upon aging and improved stain resistance in wood coatings. 收起 | |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...展开 EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. 收起 | |
| EcoFlame B-543 | Unibrom Corp. | EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, fou...展开 EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, found in most electrical appliances. It is also used as an intermediate, to make other flame retardants, and brominated carbon/carbonate oligomers (that use TBBA as a raw material) are used to flame retard thermoplastic resin systems such as certain grades of polycarbonate (PC) and polybutylene terephthalate (PBT). EcoFlame B-543 has a molecular weight of 543.7, a moisture percent of 0.2 max, a melting point of 179 min, and an organic bromide of 58 min. 收起 | |
| EcoFlame B-641 | Unibrom Corp. | EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...展开 EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. 收起 | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...展开 EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. 收起 | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...展开 EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. 收起 | |
| EcoFlame B-959 | Unibrom Corp. | EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, bu...展开 EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. 收起 | |
| FCABA 2 | PCI Group, Inc. | FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and air...展开 FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and airless spray applications. It is stable over a wide temperature range. 收起 | |
| FSDS | PCI Group, Inc. | FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives b...展开 FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives by acting as a de-aerator and flow / leveling agent. It is well suited for clear formulations and readily miscible with alkyds, polyesters, cellulosics, acrylics and high solids coating systems. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HSADA-42 | PCI Group, Inc. | HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orang...展开 HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orange peel. HSADA-42 is active throughout the curing process and demonstrates significantly less foam development than many other fluorosurfactants. 收起 | |
| HSADA-44 | PCI Group, Inc. | HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange...展开 HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange peel. HSADA-44 is active throughout the curing process and demonstrates significantly less foam development than other fluorosurfactants. 收起 | |
| HSWADA | PCI Group, Inc. | HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigmen...展开 HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigment grinding speed. It is designed for systems such as alkyds, drying oils, amino resins, vinyls, acrylics, oil modified urethanes, polyesters, and epoxy esters. 收起 | |
| HSWADA-60 | PCI Group, Inc. | HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oi...展开 HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, and epoxy ester coating systems. 收起 | |
| HSWADA-B | PCI Group, Inc. | HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino ...展开 HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, epoxy ester and polyester coating systems. 收起 | |
| MFA 31 | PCI Group, Inc. | MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances c...展开 MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances color uniformity and allows for sharper gloss. 收起 | |
| NOFO 1032 | PCI Group, Inc. | NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperatu...展开 NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperature range and will not cause surface defects associated with most silicone defoamers. 收起 | |
| NVOCF-WB | PCI Group, Inc. | NVOCF-WB is a clear liquid, non-ionic, water soluble fluorosurfactant designed to improve flow, leveling and surface appearance of water based coating systems. It contains no volatile organic components, has excellent water solubility and is recommended f...展开 NVOCF-WB is a clear liquid, non-ionic, water soluble fluorosurfactant designed to improve flow, leveling and surface appearance of water based coating systems. It contains no volatile organic components, has excellent water solubility and is recommended for use in clear coatings. NVOCF-WB can be added at any point during the manufacturing and/or use processes. 收起 | |
| OWSS | PCI Group, Inc. | OWSS is a non-ionic, clear liquid which acts as a multifunctional solubilizer and surfactant. It can be used in a wide range of products and applications including paint & coatings, water based degreasers and printing inks. | |
| RAMA | PCI Group, Inc. | RAMA is a recoatable, clear-colored blend of Alkyl-Aryl modified silicones. It is used to improve mar resistance without the standard recoat problems of common silicones. It can be used in virtually all solvent-borne systems to reduce flooding and floatin...展开 RAMA is a recoatable, clear-colored blend of Alkyl-Aryl modified silicones. It is used to improve mar resistance without the standard recoat problems of common silicones. It can be used in virtually all solvent-borne systems to reduce flooding and floating, improve flow, sharpen gloss and improve slip. 收起 | |
| SA #1 | PCI Group, Inc. | SA #1 is a clear-colored silicone blend useful in high solids coatings. Its primary function is to improve flow and leveling during application, including elimination of bubbles during application, reducing orange peel and improving the final product's ma...展开 SA #1 is a clear-colored silicone blend useful in high solids coatings. Its primary function is to improve flow and leveling during application, including elimination of bubbles during application, reducing orange peel and improving the final product's mar resistance. It can be used in virtually all high solids resins. 收起 | |
| SAFA 302 | PCI Group, Inc. | SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coeffic...展开 SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coefficient of friction. It is compatible with most types of solvent and water systems, including emulsions. 收起 | |
| So-Thick 30 | PCI Group, Inc. | So-Thick 30 is a translucent, non-ionic, non-urethane based associative thickener. It is specifically designed for high quality latex paints, high gloss, semi gloss and flat finishes in interior or exterior applications. It provides flow, leveling and thi...展开 So-Thick 30 is a translucent, non-ionic, non-urethane based associative thickener. It is specifically designed for high quality latex paints, high gloss, semi gloss and flat finishes in interior or exterior applications. It provides flow, leveling and thinning enhancements, good color acceptance and sag resistance. It can also be used in adhesives, sealants and inks. 收起 | |
| SWASW | PCI Group, Inc. | SWASW is a nonionic, clear liquid comprised of a fluoropolymer/silicone glycol polymer hybrid superspreader and a superwetting agent. It can be used in both solvent and waterborne systems. It is designed to significantly reduce surface tension, improve fl...展开 SWASW is a nonionic, clear liquid comprised of a fluoropolymer/silicone glycol polymer hybrid superspreader and a superwetting agent. It can be used in both solvent and waterborne systems. It is designed to significantly reduce surface tension, improve flow, leveling, surface appearance and overall performance by direct addition into coating and ink systems. 收起 | |
| TA-816 | PCI Group, Inc. | TA-816 is a reactive siloxane polymer blend which can produce a rough or textured appearance to paints and coatings. It can be used with lacquers, alkyd, epoxy, melamine phenolic, polyester and urethane systems. | |
| WBAFD | PCI Group, Inc. | WBAFD is a water-soluble blend of unique siloxane copolymers and castor polyethylene ethers with a milky appearance. It can be used in a variety of water based coating systems. It fosters the release and anti-foaming of a number of water based coatings an...展开 WBAFD is a water-soluble blend of unique siloxane copolymers and castor polyethylene ethers with a milky appearance. It can be used in a variety of water based coating systems. It fosters the release and anti-foaming of a number of water based coatings and inks. It is stable over wide temperature range and will not contribute to surface defects associated with some silicone defoamers. 收起 | |
| WBWADA-60 | PCI Group, Inc. | WBWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments used in solution acrylics, polyesters, alkyds and epoxies. | |
| WBWADA-B | PCI Group, Inc. | WBWADA-B is an amber colored blend of amine chemistry with dimerized acid. The resulting product is a wetting agent with high efficiency toward acidic based pigments used in solution acrylics, polyesters, alkyds and epoxies. It also has a weak affinity fo...展开 WBWADA-B is an amber colored blend of amine chemistry with dimerized acid. The resulting product is a wetting agent with high efficiency toward acidic based pigments used in solution acrylics, polyesters, alkyds and epoxies. It also has a weak affinity for alkaline pigments, which should be considered when both acid and base pigments are present. 收起 | |
| WLZn-1000 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-1000 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 2-4. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-120 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-120 is a low-lead, zinc powder that appears as a gray powder. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-1500 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-1500 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 1-3. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-200 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-200 is a low-lead, zinc powder that appears as a gray powder. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-325 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-325 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 7-9. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-400 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-400 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 6-8. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-500 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-500 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 5-7. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-600 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-600 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 4-6. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-80 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-80 is a low-lead, zinc powder that appears as a gray powder with a nominal particle size of 80 mesh. This product can be used in a variety of coating applications. | |
| WLZn-800 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-800 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 3-5. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WRACLA | PCI Group, Inc. | WRACLA is a clear colored, anionic fluorosurfactant designed for use in water-based coating systems. It fosters improved wetting, enhanced adhesion, improves leveling and reduces edge pull. It is also used to enhance adhesion to chalky surfaces in aqueous...展开 WRACLA is a clear colored, anionic fluorosurfactant designed for use in water-based coating systems. It fosters improved wetting, enhanced adhesion, improves leveling and reduces edge pull. It is also used to enhance adhesion to chalky surfaces in aqueous coatings. 收起 | |
| WREAMA | PCI Group, Inc. | WREAMA is a clear solution of a polyether-modified dimethyl polysiloxane co-polymer designed for use in all water based and water reducible alkyd resin systems. It is used to improve mar resistance, slip, flow and to enhance gloss. | |
| WRFAA | PCI Group, Inc. | WRFAA is a milky white liquid water repellent additive incorporating a VOC-compliant, EPA registered, non-leaching antimicrobial agent. It was developed to enhance water repellency in dried paint films and to increase mold, fungi and algae protection on c...展开 WRFAA is a milky white liquid water repellent additive incorporating a VOC-compliant, EPA registered, non-leaching antimicrobial agent. It was developed to enhance water repellency in dried paint films and to increase mold, fungi and algae protection on commonly used cellulosic based materials. It can be used in interior or exterior applications. 收起 |
