| A121 | Sino-American Pigment Systems, Inc. | A121, in the form of a white powder, is an anatase titanium dioxide pigment. This product can be used in printing inks, interior paints, paper coatings, and ceramics. It offers whiteness, dispersibility, and good hiding power. | |
| Barium Metaborate | Sino-American Pigment Systems, Inc. | Barium Metaborate, in the form of a white crystalline powder, is a non-toxic anti-corrosive pigment. This product can be used in solvent-borne or water-based coatings. In addition, it is resistant to powdering, mildew, stain, and fire. This product con...展开 Barium Metaborate, in the form of a white crystalline powder, is a non-toxic anti-corrosive pigment. This product can be used in solvent-borne or water-based coatings. In addition, it is resistant to powdering, mildew, stain, and fire. This product contains at most 1% moisture. 收起 | |
| Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 μm | Sino-American Pigment Systems, Inc. | Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It off...展开 Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 μm | Sino-American Pigment Systems, Inc. | Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It off...展开 Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| Blanc Fixe, Ultra Fine Grade, 198-BT, 0.4 μm | Sino-American Pigment Systems, Inc. | Blanc Fixe, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It of...展开 Blanc Fixe, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm | Sino-American Pigment Systems, Inc. | BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It of...展开 BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...展开 EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. 收起 | |
| EcoFlame B-543 | Unibrom Corp. | EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, fou...展开 EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, found in most electrical appliances. It is also used as an intermediate, to make other flame retardants, and brominated carbon/carbonate oligomers (that use TBBA as a raw material) are used to flame retard thermoplastic resin systems such as certain grades of polycarbonate (PC) and polybutylene terephthalate (PBT). EcoFlame B-543 has a molecular weight of 543.7, a moisture percent of 0.2 max, a melting point of 179 min, and an organic bromide of 58 min. 收起 | |
| EcoFlame B-641 | Unibrom Corp. | EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...展开 EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. 收起 | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...展开 EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. 收起 | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...展开 EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. 收起 | |
| EcoFlame B-959 | Unibrom Corp. | EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, bu...展开 EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. 收起 | |
| EME1900 | Sino-American Pigment Systems, Inc. | EME1900, in the form of a clear liquid, is a monoglycidyl ether of C12-C14 aliphatic alcohol. This product can be used in adhesives, flooring, potting and encapsulation applications. It is commonly used as a reactive diluent for high-viscosity epoxy res...展开 EME1900, in the form of a clear liquid, is a monoglycidyl ether of C12-C14 aliphatic alcohol. This product can be used in adhesives, flooring, potting and encapsulation applications. It is commonly used as a reactive diluent for high-viscosity epoxy resins. This product has a very low viscosity and is compatible at all concentrations with epoxy resins. Resulting blends can be cured using any epoxy curing agents. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| FR50 | Sino-American Pigment Systems, Inc. | FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. 收起 | |
| FR52 | Sino-American Pigment Systems, Inc. | FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. 收起 | |
| FR54 | Sino-American Pigment Systems, Inc. | FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. 收起 | |
| FR56 | Sino-American Pigment Systems, Inc. | FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. 收起 | |
| FR58 | Sino-American Pigment Systems, Inc. | FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. 收起 | |
| FR60 | Sino-American Pigment Systems, Inc. | FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. 收起 | |
| FR62 | Sino-American Pigment Systems, Inc. | FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. 收起 | |
| FR64 | Sino-American Pigment Systems, Inc. | FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. 收起 | |
| Glass Beads, Type I | Sino-American Pigment Systems, Inc. | Glass Beads, Type I, in the form of a colorless and transparent ball without visible bubbles or impurities, are a reflecting agent used in traffic paints. This product is composed of sodium and calcium, with its silicon dioxide content greater than 68%. ...展开 Glass Beads, Type I, in the form of a colorless and transparent ball without visible bubbles or impurities, are a reflecting agent used in traffic paints. This product is composed of sodium and calcium, with its silicon dioxide content greater than 68%. Its density lies between 2.4 and 2.6 g/cm3 and its refractive index is greater than 1.5. 收起 | |
| Glass Beads, Type III | Sino-American Pigment Systems, Inc. | Glass Beads, Type III, in the form of a colorless and transparent ball without visible bubbles or impurities, are grinding agents. This product can be used as filler or a dispersant in paint, inks, and chemicals. its specific gravity lies between 2.4 an...展开 Glass Beads, Type III, in the form of a colorless and transparent ball without visible bubbles or impurities, are grinding agents. This product can be used as filler or a dispersant in paint, inks, and chemicals. its specific gravity lies between 2.4 and 2.6 g/cm3 and its compressive strength is greater than 1200N. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| R208 | Sino-American Pigment Systems, Inc. | R208, in the form of a white powder, is a general-purpose grade of rutile titanium dioxide. This product has been created through the sulfate process and can be used in inks and traffic paints. It offers fair hiding power, dispersibility, and low oil ab...展开 R208, in the form of a white powder, is a general-purpose grade of rutile titanium dioxide. This product has been created through the sulfate process and can be used in inks and traffic paints. It offers fair hiding power, dispersibility, and low oil absorption. 收起 | |
| R255z/R255 | Sino-American Pigment Systems, Inc. | R255z/R255, in the form of a white powder, is a general-purpose rutile titanium dioxide pigment. This product has been created through the sulfate process, and can be used in aqueous or solvent-based paints, paper coatings, waxing stock, and rubber appli...展开 R255z/R255, in the form of a white powder, is a general-purpose rutile titanium dioxide pigment. This product has been created through the sulfate process, and can be used in aqueous or solvent-based paints, paper coatings, waxing stock, and rubber applications. It has been treated with organic and inorganic surface material and offers good hiding, brightness, and dispersibility. 收起 | |
| SR50 | Sino-American Pigment Systems, Inc. | SR50, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR50, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. 收起 | |
| SR52 | Sino-American Pigment Systems, Inc. | SR52, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR52, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. 收起 | |
| SR54 | Sino-American Pigment Systems, Inc. | SR54, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR54, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. 收起 | |
| SR56 | Sino-American Pigment Systems, Inc. | SR56, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR56, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. 收起 | |
| SR58 | Sino-American Pigment Systems, Inc. | SR58, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR58, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. 收起 | |
| SR60 | Sino-American Pigment Systems, Inc. | SR60, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR60, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. 收起 | |
| SR62 | Sino-American Pigment Systems, Inc. | SR62, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR62, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. 收起 | |
| SR64 | Sino-American Pigment Systems, Inc. | SR64, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR64, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. 收起 | |
| Titanium Dioxide Anatase | Hoten Chemical International Group | Titanium Dioxide Anatase is a white powder derived from titanium concentrates and sulfuric acid. This anatase titanium dioxide pigment can provide whiteness, gloss, and high intensity in paints, coatings, and printing inks. | |
| Titanium Dioxide Rutile for Paint Industry HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting ...展开 Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing inks. 收起 | |
| Titanium Dioxide Rutile HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durabilit...展开 Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing ink. 收起 | |
| White Cloud® 30 LITHOPONE | Sino-American Pigment Systems, Inc. | White Cloud® 30 LITHOPONE, in the form of a white powder, is a zinc sulfide opacifying pigment extender of titanium dioxide. This product can be used in high or medium grades of paints and coatings. It is compatible with all water-based or solvent-borne...展开 White Cloud® 30 LITHOPONE, in the form of a white powder, is a zinc sulfide opacifying pigment extender of titanium dioxide. This product can be used in high or medium grades of paints and coatings. It is compatible with all water-based or solvent-borne UV, EB and thermoset systems for paints, coatings, and inks from primers to finish coats. It offers fineness and good dispersibility in a co-crystalline particle with a high light-scattering and refractive index. 收起 | |
| White Cloud® SAFE YELLOW 65-c | Sino-American Pigment Systems, Inc. | White Cloud® SAFE YELLOW 65-c, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior or exterior latex applications, alkyd and acrylic coatings, and flexographic, g...展开 White Cloud® SAFE YELLOW 65-c, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior or exterior latex applications, alkyd and acrylic coatings, and flexographic, gravure or lithographic thermoset or UV-cured printing ink formulations. It is an inorganic pigment with a monoarylide yellow PY-65 shell that provides the chemical stability, thermostability, and abrasion resistance of inorganic pigments with the brightness, luster and tinting strength of organic pigments. 收起 | |
| White Cloud® SAFE YELLOW 74-HEI | Sino-American Pigment Systems, Inc. | White Cloud® SAFE YELLOW 74-HEI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in industrial coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure ...展开 White Cloud® SAFE YELLOW 74-HEI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in industrial coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure or lithographic thermoset or UV-cured printing ink formulations. It is a colored inorganic pigment encapsulated with a monoarylide yellow PY-74 shell, which provides the chemical stability, heat stability, and abrasion resistance of inorganic pigments with the brightness, luster, and tinting strength of an organic pigment. 收起 | |
| White Cloud® SAFE YELLOW 83-CI | Sino-American Pigment Systems, Inc. | White Cloud® SAFE YELLOW 83-CI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure and ...展开 White Cloud® SAFE YELLOW 83-CI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure and lithographic thermoset or UV-cured printing ink formulations. It is a colored inorganic pigment encapsulated in a diarylide yellow PY-83 shell, which provides the chemical stability, heat stability, and abrasion resistance of inorganic pigments, with the brightness, luster and tinting strength of organic pigments. 收起 | |
| White Cloud® SYIC-c | Sino-American Pigment Systems, Inc. | White Cloud® SYIC-c, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces orga...展开 White Cloud® SYIC-c, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces organic usage while improving flow, opacity, dispersibility and film performance. 收起 | |
| White Cloud® SYIC-h | Sino-American Pigment Systems, Inc. | White Cloud® SYIC-h, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces orga...展开 White Cloud® SYIC-h, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces organic usage while improving flow, opacity, dispersibility and film performance. 收起 | |
| WLZn-1000 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-1000 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 2-4. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-120 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-120 is a low-lead, zinc powder that appears as a gray powder. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-1500 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-1500 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 1-3. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-200 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-200 is a low-lead, zinc powder that appears as a gray powder. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-325 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-325 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 7-9. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-400 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-400 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 6-8. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-500 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-500 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 5-7. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-600 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-600 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 4-6. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. | |
| WLZn-80 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-80 is a low-lead, zinc powder that appears as a gray powder with a nominal particle size of 80 mesh. This product can be used in a variety of coating applications. | |
| WLZn-800 | Changsha New Welllink Zinc Industry Co.,Ltd. | WLZn-800 is a low-lead, zinc powder that appears as a gray powder with an average particle size of 3-5. This product can be used in zinc-rich coatings, particularly in anti-corrosion and other high-performance applications. |
