| AEPD® VOX 1000 | ANGUS Chemical Company 安格斯化学公司 | 一个新的多官能团添加剂，用于低气味，零VOC户内水性油漆。它具有非常温和的气味，高沸点和低蒸汽压。这些特点使之成为需要符合EU directive 2004/42/EC法规的油漆生产商一个理想的配方工具 | |
| ALKATERGE®-T | ANGUS Chemical Company 安格斯化学公司 | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展开 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起 | |
| AMP® | ANGUS Chemical Company 安格斯化学公司 | 这是一种无色，低粘度流体，大量用于金属加工流体，涂料，锅炉水体系和个人护理等领域。它可用作中和树脂的胺，协同分散剂，脱甲醛剂，腐蚀抑制剂以及作为合成的原料。 | |
| AMP-95® | ANGUS Chemical Company 安格斯化学公司 | 被普遍认为是一种用于所有类型的乳胶漆的多功能添加剂。 | |
| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中，也具有上述性能 | |
| ANTIGEL® HS | Bernd Schwegmann GmbH & Co. KG | 具有良好润湿性和分散性的粘度稳定剂，尤其适合高固体份涂料体系，不含酮肟和芳香族化合物，可生物降解 | |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF是一种多功能助剂，适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物，可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀，因而色度深。可减少分散时间、絮凝和沉降现象，提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性，可获得最佳的颜色深度 | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中 | |
| AVANTANE® PA 4000 | ANGUS Chemical Company 安格斯化学公司 | 一种专门设计用于满足溶剂型轮转凹印和柔印印刷性能要求的添加剂。 | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | Blister Free 3可用于含溶剂和水稀释体系。在含溶剂体系中，Blister Free 3作为消泡剂尤为有效，也可部分作为流平剂。它适用于以下基料：醇酸、醇酸/聚酯-、不饱和聚酯-、NC-、AC-、PU和丙烯酸体系。Blister Free 3在水稀释涂料体系中也非常有效，尤其是基于醇酸/丙烯酸、饱和聚酯和环氧体系 | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | Blister Free 45在以下溶剂型体系中具有良好的消泡效果，基于硝基纤维素、酸催化、通用聚氨酯。Blister Free 45对于水稀释涂料也具有非常好的消泡效果，基于以下基料：聚酯、酸性树脂、丙烯酸 | |
| BLISTER FREE 54 | Bernd Schwegmann GmbH & Co. KG | Blister Free 54可有效应用于几乎所有含溶剂单或多组分油漆和涂料体系，包括自干和烘烤醇酸、环氧体系、PU体系、丙烯酸，特殊的应用领域是印刷油墨和卷材涂料体系 | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | Blister Free 55在各种水性醇酸体系中具有出色的消泡效果，例如那些中和后变水溶性，以及在醇酸乳液中，含或不含助溶剂的。在很多改性醇酸和醇酸/丙烯酸混合体系中也具有非常好的消泡效果 | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | Blister Free 56 可用于UV固化体系。它可用于下面提到的水稀释体系。Blister Free 56具有良好的消泡效果，它在这些体系：醇酸/丙烯酸油漆、饱和聚酯、环氧中有部分流平功能 | |
| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | Blister Free 66可作为消泡剂应用于所有常规涂料体系中。Blister Free 66 在基于聚酯、聚氨酯和丙烯酸酯的体系中尤为有效 | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | Blister Free 75在常规NC体系和NC混合体系、AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡效果。Blister Free 75在基于以下基料：长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有非常好的消泡效果 | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | 完全消泡是形成一个出色涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷，它也经常会降低光泽和耐水性。Blister Free 77可相当大程度上减少气泡形成，造成强烈消泡，并均一地形成不饱和聚酯蜡层 | |
| BLISTER FREE 88 | Bernd Schwegmann GmbH & Co. KG | Blister Free 88是一种表面活性添加剂，会影响表面张力。该性能可减少在油漆的生产或施工过程中气泡的形成。任何形成的气泡都可被快速摧毁。通常Blister Free 88对涂膜流平具有良好的效果 | |
| DMAMP-80® | ANGUS Chemical Company 安格斯化学公司 | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...展开 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. 收起 | |
| Epolight™ 1117 | Epolin | Epolight™ 1117 is a near infrared dye. This product comes in a brown powder and is characterized by its tetrakis ammonium structure. It has a melting point of 185-188°C and is suitable for solvent-based coatings. | |
| Epolight™ 1125 | Epolin | Epolight™ 1125 is a near infrared dye. This product comes in a green powder and is characterized by its tetrakis ammonium structure. It has a melting point of 142-145°C and is suitable for coatings with high melt flow polycarbonate. | |
| Epolight™ 1130 | Epolin | Epolight™ 1130 is a near infrared dye. This product comes in a green powder and is characterized by its tetrakis ammonium structure. It has a melting point of 125-128°C and is suitable for coatings. | |
| Epolight™ 1178 | Epolin | Epolight™ 1178 is a near infrared dye. This product comes in a brown powder and is characterized by its tetrakis ammonium structure. It has a melting point of 210-213°C and is suitable for coatings. | |
| Epolight™ 2057 | Epolin | Epolight™ 2057 is a near infrared dye. This product comes in a green powder and is characterized by its light transmission properties. It has a melting point of 108-112°C and is suitable for coatings. | |
| Epolight™ 2062 | Epolin | Epolight™ 2062 is a near infrared dye. This product comes in a green powder and is characterized by its light transmission properties. It has a melting point of 98-102°C and is suitable for coatings. | |
| Epolight™ 2063 | Epolin | Epolight™ 2063 is a near infrared dye. This product comes in a dark green powder and is recommended for diode laser. It has a melting point of 136-140°C and is suitable for coatings. | |
| Epolight™ 2066 | Epolin | Epolight™ 2066 is a near infrared dye. This product comes in a green powder and is characterized by its light transmission properties. It has a melting point of 98-100°C and is suitable for coatings. | |
| Epolight™ 2164 | Epolin | Epolight™ 2164 is a near infrared dye. This product comes in a green powder and is characterized by its light transmission properties. It has a melting point of 116-120°C and is suitable for coatings. | |
| Epolight™ 3036 | Epolin | Epolight™ 3036 is a near infrared dye. It comes in a black powder and has a melting point of 62-64°C. This product is characterized by its soluble properties in organic solvents, good visible light transmission and thermal stability. It is often used in c...展开 Epolight™ 3036 is a near infrared dye. It comes in a black powder and has a melting point of 62-64°C. This product is characterized by its soluble properties in organic solvents, good visible light transmission and thermal stability. It is often used in coatings. 收起 | |
| Epolight™ 3442 | Epolin | Epolight™ 3442 is a near infrared dye. It comes in a blue-black powder and has a melting point of 184-188°C. This product is characterized by its good thermal stability and is often used in coatings for polar solvents. | |
| Epolight™ 3443 | Epolin | Epolight™ 3443 is a near infrared dye. It comes in a blue-black powder and has a melting point of 240-244°C. This product is characterized by its good thermal stability and is often used in coatings with polar solvents. | |
| Epolight™ 3801 | Epolin | Epolight™ 3801 is a near infrared dye. This product comes in a green powder and is characterized by its excellent visible light transmission, good thermal stability and solubility. It is often used in coatings. | |
| Epolight™ 4037 | Epolin | Epolight™ 4037 is a near infrared dye. It comes in a black powder and has a melting point of 67-70°C. This product is characterized by its soluble properties in organic solvents, excellent visible light transmission and thermal stability. It is often used...展开 Epolight™ 4037 is a near infrared dye. It comes in a black powder and has a melting point of 67-70°C. This product is characterized by its soluble properties in organic solvents, excellent visible light transmission and thermal stability. It is often used in coatings. 收起 | |
| Epolight™ 5262 | Epolin | Epolight™ 5262 is a visible light dye. This product comes in a blue powder and has a melting point of 154-160°C. It gives a deep blue color in solution and is also used in solventborne coatings. | |
| Epolight™ 5391 | Epolin | Epolight™ 5391 is a fluorescent visible light dye. This product comes in a red powder and has a melting point of 220-225°C. It is often used in solventborne coatings. | |
| Epolight™ 5393 | Epolin | Epolight™ 5393 is a visible light dye. This product comes in a red powder and has a melting point of 325-329°C. It is often used in coatings and inks. | |
| Epolight™ 5394 | Epolin | Epolight™ 5394 is a visible light dye. This product comes in a violet powder and has a melting point of 172-175°C. It is thermally stable and is also used in solventborne coatings. | |
| Epolight™ 5396 | Epolin | Epolight™ 5396 is a visible light dye. This product comes in a red powder and has a melting point of 243-245°C. It has strong fluorescence and is also used in solventborne coatings. | |
| Epolight™ 5397 | Epolin | Epolight™ 5397 is a visible light dye. This product comes in a violet powder and has a melting point of 217-220°C. It is thermally stable and is often used in solventborne coatings. | |
| Epolight™ 5411 | Epolin | Epolight™ 5411 is a visible light dye. This product comes in a blue powder and has a melting point of 228-235°C. It has good thermal stability and is often used in solventborne coatings. | |
| Epolight™ 5547 | Epolin | Epolight™ 5547 is a near infrared dye. This product comes in a reddish-brown powder and is characterized by its absorption properties. It has a melting point of 224-227°C and is suitable for solvent-based coatings. | |
| Epolight™ 5548 | Epolin | Epolight™ 5548 is a near infrared dye. This product comes in a green powder and is characterized by its absorption properties. It has a melting point of 255-258°C and is suitable for solvent-based coatings. | |
| Epolight™ 5587 | Epolin | Epolight™ 5587 is a near infrared dye. This product comes in a brown powder and is characterized by its absorption properties. It is suitable for solvent-based coatings. | |
| Epolight™ 5588 | Epolin | Epolight™ 5588 is a near infrared dye. This product comes in a brown powder and is characterized by its absorption properties. It is suitable for solvent-based coatings. | |
| Epolight™ 5699 | Epolin | Epolight™ 5699 is a visible dye. This product comes in a purple powder and has good solar stability and excellent visible light transmission. It has a melting point of >300°C and is suitable for solvent-based coatings. | |
| Epolight™ 5753 | Epolin | Epolight™ 5753 is a near infrared dye. This product comes in a green powder and is characterized by its absorption properties. It has a melting point of 212-214°C and is suitable for inks and coatings. | |
| Epolight™ 5768 | Epolin | Epolight™ 5768 is a near infrared dye. This product comes in a light green powder and is characterized by its absorption properties. It is thermally stable and is suitable for solvent-based coatings. | |
| Epolight™ 5820 | Epolin | Epolight™ 5820 is an azo/chrome complex absorbing dye. This product comes in a yellow powder and has a melting point of 290°C. It is suitable for inks and solvent-based coatings. | |
| Epolight™ 6084 | Epolin | Epolight™ 6084 is a phthalocyanine dye. This product comes in a blue powder and has a melting point of 190-195°C. It is characterized by its soluble properties in polycarbonate and is suitable for solvent-based coatings. | |
| Epolight™ 6661 | Epolin | Epolight™ 6661 is a phthalocyanine dye that comes in a blue powder. This product is suitable for solvent-based coatings. | |
| Epolight™ 7527A | Epolin | Epolight™ 7527A is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 675 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527B | Epolin | Epolight™ 7527B is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 695 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527C | Epolin | Epolight™ 7527C is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 835 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527D | Epolin | Epolight™ 7527D is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 875 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527E | Epolin | Epolight™ 7527E is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 920 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527F | Epolin | Epolight™ 7527F is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 975 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527G | Epolin | Epolight™ 7527G is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 1065 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7568 | Epolin | Epolight™ 7568 is a laser absorbing dye recommended for the YAG laser. This product has NIR absorbing properties that block light at a rate of 700 to 1150 nm. It is a bright green powder suitable for coatings. | |
| Epolight™ 8316 | Epolin | Epolight™ 8316 is a transparent screen printing ink for laminated PVC cards. This product is a yellow screen ink and has a solids content of <0.1%. | |
| Epolight™ 8330 | Epolin | Epolight™ 8330 is a transparent screen printing ink for laminated PVC cards. This product is a grey screen ink and has a solids content of <0.1%. | |
| Epolight™ 8331 | Epolin | Epolight™ 8331 is a transparent screen printing ink for laminated PVC cards. This product is a light-grey screen ink and has a solids content of <0.1%. | |
| Epolight™ 8412 | Epolin | Epolight™ 8412 is a transparent screen printing ink for laminated PVC cards. This product is a blue screen ink and has a solids content of <0.1%. | |
| Epolight™ 8422 | Epolin | Epolight™ 8422 is a transparent screen printing ink for laminated PVC cards. This product is an orange screen ink and has a solids content of <0.1%. | |
| Epolight™ 8423 | Epolin | Epolight™ 8423 is a transparent screen printing ink for laminated PVC cards. This product is a blue screen ink and has a solids content of <0.1%. | |
| Epolight™ 8424 | Epolin | Epolight™ 8424 is a transparent screen printing ink for laminated PVC cards. This product is a green-grey screen ink and has a solids content of <0.1%. | |
| Epolight™ 8425 | Epolin | Epolight™ 8425 is a transparent screen printing ink for laminated PVC cards. This product is a red screen ink and has a solids content of <0.1%. | |
| Epolight™ 8426 | Epolin | Epolight™ 8426 is a transparent screen printing ink for laminated PVC cards. This product is a grey screen ink and has a solids content of <0.1%. | |
| Epolight™ 8551 | Epolin | Epolight™ 8551 is a transparent screen printing ink for laminated PVC cards. This product is a very pale yellow screen ink and has a solids content of <0.1%. | |
| Epolight™ 8656 | Epolin | Epolight™ 8656 is a transparent screen printing ink for laminated PVC cards. This product is a true blue screen ink and has a solids content of <0.1%. | |
| Epolight™ 8679 | Epolin | Epolight™ 8679 is a transparent screen printing ink for laminated PVC cards. This product is a yellow screen ink and has a solids content of <0.1%. | |
| Epolight™ 8680 | Epolin | Epolight™ 8680 is a transparent screen printing ink for laminated PVC cards. This product is an orange screen ink and has a solids content of <0.1%. | |
| Epolight™ 8681 | Epolin | Epolight™ 8681 is a transparent screen printing ink for laminated PVC cards. This product is a red screen ink and has a solids content of <0.1%. | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company 安格斯化学公司 | 一种经过改进的万能专业涂料助剂，是一种有效的溶液，能够满足涂料配方的要求，减少特殊助剂的用量。 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| KORRODUR | Bernd Schwegmann GmbH & Co. KG | Korrodur主要作为一种锈转化助剂应用于常规醇酸树脂涂料中。然而，Korrodur在基于环氧、氯化橡胶或丙烯酸基料的含溶剂油漆中也有良好效果。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| KORRODUR AL 2 | Bernd Schwegmann GmbH & Co. KG | Korrodur AL 2用于底漆中消除差的基材和差强人意的喷涂条件的影响。Korrodur AL 2可将残留的锈转换成非腐蚀性丹宁酸铁，并提供长期腐蚀保护。如果存在湿气，它会在喷涂过程中乳化进入膜中，干燥时会蒸发。润湿剂可确保对残留锈颗粒、灰尘的良好渗透以及对除油很差的表面的润湿 | |
| LA THIX FB | Bernd Schwegmann GmbH & Co. KG | 可增稠所有常规带极性基团基料的含溶剂体系。尤其适用于高膜厚体系、纹理烤漆、墙面和DIY油漆。主要优势为：液态，因此易添加、耐温、对光泽无负面影响、可防止沉降和流挂 | |
| MITTEL S | Bernd Schwegmann GmbH & Co. KG | Mittel S适用于几乎所有非水性体系，可高效应用于醇酸（自干）、醇酸/聚酯（热固化）、氯化橡胶、环氧、聚氨酯、热塑性丙烯酸和反应性丙烯酸体系 | |
| NIKANE® MS 3000 | ANGUS Chemical Company 安格斯化学公司 | 一种性能独特的多功能溶剂，用于构成多种工业保养涂料体系中的溶剂型还原剂和冲淡剂。 | |
| NIKANE® MS 5000 | ANGUS Chemical Company 安格斯化学公司 | 一种多功能溶剂，在溶剂型体系中有独特的性能。不但能够轻易地溶解各种材料，而且能够赋予溶解液以特性，因此得到了广泛的应用。 | |
| NO SED | Bernd Schwegmann GmbH & Co. KG | 防沉降助剂，适合溶剂型涂料 | |
| SCHWEGO ® Pur 8051 | Bernd Schwegmann GmbH & Co. KG | Schwego® Pur 8051是一种非离子型增稠剂，能有效改善水性涂料和清漆的流变性能。同时，Schwego®Pur 8051也可以与其它增稠剂配合使用而达到某种特别的效果。这种特别效果也取决于基料的种类。 | |
| SCHWEGO® Antimec | Bernd Schwegmann GmbH & Co. KG | Schwego® Antimec可用于几乎所有常规油漆体系，水性和溶剂型。而防结皮效果只对长油度醇酸树脂体系有效 | |
| SCHWEGO® corrit | Bernd Schwegmann GmbH & Co. KG | Schwego® Corrit主要作为一种锈转化助剂应用于水性油漆。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| SCHWEGO® Everlast | Bernd Schwegmann GmbH & Co. KG | 基于螯合物的铁锈净化系统。轻微浆状的液体，可与中和的铁锈层形成金属有机离子复合物。该逐步形成的、黑色的、非常小巧的保护层可提供长期腐蚀耐久性，由于它含有成膜助剂，同时也是一个完美的底漆 | |
| SCHWEGO® Flow 8057 | Bernd Schwegmann GmbH & Co. KG | Schwego® Flow 8057可用于几乎所有水稀释涂料体系。不存在不相容性问题。 | |
| SCHWEGO® Flow 8058 | Bernd Schwegmann GmbH & Co. KG | Schwego® Flow 8058可用于几乎所有水稀释涂料体系。不存在不相容性问题。Schwego® Flow 8058仅含有水一种挥发性组分，使其特别适合用于无溶剂水稀释体系 | |
| SCHWEGO® Flow 8060 | Bernd Schwegmann GmbH & Co. KG | Schwego® Flow 8060可用于常规含溶剂或无溶剂涂料体系。一般来说，Schwego® Flow 8060对所有基料体系均有效，但它不适合用于水性涂料材料 | |
| SCHWEGO® Fluor 6523 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，可生物降解，不含PFOS和PFOA，基于C4技术 | |
| SCHWEGO® Fluor 6536 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，不含PFOS和PFOA，基于环保型C4、C6技术 | |
| SCHWEGO® Fluor 6543 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，不含PFOS和PFOA，基于环保型C4、C6技术 | |
| SCHWEGO® Foam 6303 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6303可用于含溶剂和水稀释体系。在含溶剂体系中，Schwego® Foam 6303作为消泡脱气剂尤为有效，也可部分作为流平剂。适合以下基料：醇酸、醇酸/聚酯、不饱和聚酯、NC-、AC-、PU和聚丙烯酸体系 | |
| SCHWEGO® Foam 6325 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6325是一种液体，是所有乳胶漆非常有效的消泡剂，尤其是对于基于苯乙烯/丁二烯乳胶和丙烯酸共聚物的乳胶漆。Schwego® Foam 6325在水中易乳化，不含硅 | |
| SCHWEGO® Foam 6343 | Bernd Schwegmann GmbH & Co. KG | 消泡剂，适合溶剂型涂料体系 | |
| SCHWEGO® Foam 6351 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6351可用于几乎所有无溶剂和含溶剂涂料体系。在锤纹罩面漆、建筑涂料、反应性厚涂膜体系、重着色涂料体系和配方中特别有效，适用于无气喷涂。Schwego® Foam 6351在水性工业漆（醇酸/三聚氰胺体系）中也有效果 |
