| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| Epolight™ 1117 | Epolin | Epolight™ 1117 is a near infrared dye. This product comes in a brown powder and is characterized by its tetrakis ammonium structure. It has a melting point of 185-188°C and is suitable for solvent-based coatings. | |
| Epolight™ 1125 | Epolin | Epolight™ 1125 is a near infrared dye. This product comes in a green powder and is characterized by its tetrakis ammonium structure. It has a melting point of 142-145°C and is suitable for coatings with high melt flow polycarbonate. | |
| Epolight™ 1130 | Epolin | Epolight™ 1130 is a near infrared dye. This product comes in a green powder and is characterized by its tetrakis ammonium structure. It has a melting point of 125-128°C and is suitable for coatings. | |
| Epolight™ 1178 | Epolin | Epolight™ 1178 is a near infrared dye. This product comes in a brown powder and is characterized by its tetrakis ammonium structure. It has a melting point of 210-213°C and is suitable for coatings. | |
| Epolight™ 2057 | Epolin | Epolight™ 2057 is a near infrared dye. This product comes in a green powder and is characterized by its light transmission properties. It has a melting point of 108-112°C and is suitable for coatings. | |
| Epolight™ 2062 | Epolin | Epolight™ 2062 is a near infrared dye. This product comes in a green powder and is characterized by its light transmission properties. It has a melting point of 98-102°C and is suitable for coatings. | |
| Epolight™ 2063 | Epolin | Epolight™ 2063 is a near infrared dye. This product comes in a dark green powder and is recommended for diode laser. It has a melting point of 136-140°C and is suitable for coatings. | |
| Epolight™ 2066 | Epolin | Epolight™ 2066 is a near infrared dye. This product comes in a green powder and is characterized by its light transmission properties. It has a melting point of 98-100°C and is suitable for coatings. | |
| Epolight™ 2164 | Epolin | Epolight™ 2164 is a near infrared dye. This product comes in a green powder and is characterized by its light transmission properties. It has a melting point of 116-120°C and is suitable for coatings. | |
| Epolight™ 3036 | Epolin | Epolight™ 3036 is a near infrared dye. It comes in a black powder and has a melting point of 62-64°C. This product is characterized by its soluble properties in organic solvents, good visible light transmission and thermal stability. It is often used in c...展开 Epolight™ 3036 is a near infrared dye. It comes in a black powder and has a melting point of 62-64°C. This product is characterized by its soluble properties in organic solvents, good visible light transmission and thermal stability. It is often used in coatings. 收起 | |
| Epolight™ 3442 | Epolin | Epolight™ 3442 is a near infrared dye. It comes in a blue-black powder and has a melting point of 184-188°C. This product is characterized by its good thermal stability and is often used in coatings for polar solvents. | |
| Epolight™ 3443 | Epolin | Epolight™ 3443 is a near infrared dye. It comes in a blue-black powder and has a melting point of 240-244°C. This product is characterized by its good thermal stability and is often used in coatings with polar solvents. | |
| Epolight™ 3801 | Epolin | Epolight™ 3801 is a near infrared dye. This product comes in a green powder and is characterized by its excellent visible light transmission, good thermal stability and solubility. It is often used in coatings. | |
| Epolight™ 4037 | Epolin | Epolight™ 4037 is a near infrared dye. It comes in a black powder and has a melting point of 67-70°C. This product is characterized by its soluble properties in organic solvents, excellent visible light transmission and thermal stability. It is often used...展开 Epolight™ 4037 is a near infrared dye. It comes in a black powder and has a melting point of 67-70°C. This product is characterized by its soluble properties in organic solvents, excellent visible light transmission and thermal stability. It is often used in coatings. 收起 | |
| Epolight™ 5262 | Epolin | Epolight™ 5262 is a visible light dye. This product comes in a blue powder and has a melting point of 154-160°C. It gives a deep blue color in solution and is also used in solventborne coatings. | |
| Epolight™ 5391 | Epolin | Epolight™ 5391 is a fluorescent visible light dye. This product comes in a red powder and has a melting point of 220-225°C. It is often used in solventborne coatings. | |
| Epolight™ 5393 | Epolin | Epolight™ 5393 is a visible light dye. This product comes in a red powder and has a melting point of 325-329°C. It is often used in coatings and inks. | |
| Epolight™ 5394 | Epolin | Epolight™ 5394 is a visible light dye. This product comes in a violet powder and has a melting point of 172-175°C. It is thermally stable and is also used in solventborne coatings. | |
| Epolight™ 5396 | Epolin | Epolight™ 5396 is a visible light dye. This product comes in a red powder and has a melting point of 243-245°C. It has strong fluorescence and is also used in solventborne coatings. | |
| Epolight™ 5397 | Epolin | Epolight™ 5397 is a visible light dye. This product comes in a violet powder and has a melting point of 217-220°C. It is thermally stable and is often used in solventborne coatings. | |
| Epolight™ 5411 | Epolin | Epolight™ 5411 is a visible light dye. This product comes in a blue powder and has a melting point of 228-235°C. It has good thermal stability and is often used in solventborne coatings. | |
| Epolight™ 5547 | Epolin | Epolight™ 5547 is a near infrared dye. This product comes in a reddish-brown powder and is characterized by its absorption properties. It has a melting point of 224-227°C and is suitable for solvent-based coatings. | |
| Epolight™ 5548 | Epolin | Epolight™ 5548 is a near infrared dye. This product comes in a green powder and is characterized by its absorption properties. It has a melting point of 255-258°C and is suitable for solvent-based coatings. | |
| Epolight™ 5587 | Epolin | Epolight™ 5587 is a near infrared dye. This product comes in a brown powder and is characterized by its absorption properties. It is suitable for solvent-based coatings. | |
| Epolight™ 5588 | Epolin | Epolight™ 5588 is a near infrared dye. This product comes in a brown powder and is characterized by its absorption properties. It is suitable for solvent-based coatings. | |
| Epolight™ 5699 | Epolin | Epolight™ 5699 is a visible dye. This product comes in a purple powder and has good solar stability and excellent visible light transmission. It has a melting point of >300°C and is suitable for solvent-based coatings. | |
| Epolight™ 5753 | Epolin | Epolight™ 5753 is a near infrared dye. This product comes in a green powder and is characterized by its absorption properties. It has a melting point of 212-214°C and is suitable for inks and coatings. | |
| Epolight™ 5768 | Epolin | Epolight™ 5768 is a near infrared dye. This product comes in a light green powder and is characterized by its absorption properties. It is thermally stable and is suitable for solvent-based coatings. | |
| Epolight™ 5820 | Epolin | Epolight™ 5820 is an azo/chrome complex absorbing dye. This product comes in a yellow powder and has a melting point of 290°C. It is suitable for inks and solvent-based coatings. | |
| Epolight™ 6084 | Epolin | Epolight™ 6084 is a phthalocyanine dye. This product comes in a blue powder and has a melting point of 190-195°C. It is characterized by its soluble properties in polycarbonate and is suitable for solvent-based coatings. | |
| Epolight™ 6661 | Epolin | Epolight™ 6661 is a phthalocyanine dye that comes in a blue powder. This product is suitable for solvent-based coatings. | |
| Epolight™ 7527A | Epolin | Epolight™ 7527A is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 675 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527B | Epolin | Epolight™ 7527B is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 695 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527C | Epolin | Epolight™ 7527C is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 835 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527D | Epolin | Epolight™ 7527D is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 875 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527E | Epolin | Epolight™ 7527E is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 920 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527F | Epolin | Epolight™ 7527F is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 975 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7527G | Epolin | Epolight™ 7527G is a visible opaque dye. This product comes in a black powder and blocks light from 200 to 1065 nm. It is suitable for solvent-based coatings. | |
| Epolight™ 7568 | Epolin | Epolight™ 7568 is a laser absorbing dye recommended for the YAG laser. This product has NIR absorbing properties that block light at a rate of 700 to 1150 nm. It is a bright green powder suitable for coatings. | |
| Epolight™ 8316 | Epolin | Epolight™ 8316 is a transparent screen printing ink for laminated PVC cards. This product is a yellow screen ink and has a solids content of <0.1%. | |
| Epolight™ 8330 | Epolin | Epolight™ 8330 is a transparent screen printing ink for laminated PVC cards. This product is a grey screen ink and has a solids content of <0.1%. | |
| Epolight™ 8331 | Epolin | Epolight™ 8331 is a transparent screen printing ink for laminated PVC cards. This product is a light-grey screen ink and has a solids content of <0.1%. | |
| Epolight™ 8412 | Epolin | Epolight™ 8412 is a transparent screen printing ink for laminated PVC cards. This product is a blue screen ink and has a solids content of <0.1%. | |
| Epolight™ 8422 | Epolin | Epolight™ 8422 is a transparent screen printing ink for laminated PVC cards. This product is an orange screen ink and has a solids content of <0.1%. | |
| Epolight™ 8423 | Epolin | Epolight™ 8423 is a transparent screen printing ink for laminated PVC cards. This product is a blue screen ink and has a solids content of <0.1%. | |
| Epolight™ 8424 | Epolin | Epolight™ 8424 is a transparent screen printing ink for laminated PVC cards. This product is a green-grey screen ink and has a solids content of <0.1%. | |
| Epolight™ 8425 | Epolin | Epolight™ 8425 is a transparent screen printing ink for laminated PVC cards. This product is a red screen ink and has a solids content of <0.1%. | |
| Epolight™ 8426 | Epolin | Epolight™ 8426 is a transparent screen printing ink for laminated PVC cards. This product is a grey screen ink and has a solids content of <0.1%. | |
| Epolight™ 8551 | Epolin | Epolight™ 8551 is a transparent screen printing ink for laminated PVC cards. This product is a very pale yellow screen ink and has a solids content of <0.1%. | |
| Epolight™ 8656 | Epolin | Epolight™ 8656 is a transparent screen printing ink for laminated PVC cards. This product is a true blue screen ink and has a solids content of <0.1%. | |
| Epolight™ 8679 | Epolin | Epolight™ 8679 is a transparent screen printing ink for laminated PVC cards. This product is a yellow screen ink and has a solids content of <0.1%. | |
| Epolight™ 8680 | Epolin | Epolight™ 8680 is a transparent screen printing ink for laminated PVC cards. This product is an orange screen ink and has a solids content of <0.1%. | |
| Epolight™ 8681 | Epolin | Epolight™ 8681 is a transparent screen printing ink for laminated PVC cards. This product is a red screen ink and has a solids content of <0.1%. | |
| Epoxy Resin E-10 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-10 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow solid granular powder that has good mechanical and anti-corrosive properties. It can be used in paints and powder coatings. | |
| Epoxy Resin E-12 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...展开 Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. 收起 | |
| Epoxy Resin E-14 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...展开 Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起 | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF808 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...展开 Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF818 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...展开 Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF828 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...展开 Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF838 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...展开 Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B HEC，非离子型水溶性聚合物，是一种白色，自由流动的粒状粉末。它不溶于有机溶剂，但它很容易分散在冷水和热水中，得到不同粘度的溶液。此产品被用作增稠剂，保护胶体，基料，稳定剂和助悬剂，特别是应用于的需要非离子型材料的场合。 | |
| Natrosol™ FPS | Ashland | Natrosol™ FPS has high solids liquid suspensions designed for easy handling in conventional paint manufacturing equipment. | |
| Natrosol™ FPS Plus 330 | Ashland | Natrosol™ FPS Plus 330 is a aqueous dispersions of cellulosic water-soluble polymers for use as latex paint thickeners. |
