| B-100 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | B-100 Polyether Amine colorless to pale yellow liquid which permits a slight haze. This product has an average molecular weight of about 1000 and a flash point of 193.3 degrees Celsius. B-100 Polyether Amine acts as a dispersant in coatings and inks. | |
| CH-4900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ult...展开 CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ultraviolet, and ozone resistance to adhesives. 收起 | |
| CH-5800 Insulating Glass Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...展开 CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. 收起 | |
| CH-5900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...展开 CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. 收起 | |
| CH-910 | Yangzhou Chenhua New Material CO., LTD. | CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating. | |
| CH-911 | Yangzhou Chenhua New Material CO., LTD. | CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance ...展开 CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance to coatings. 收起 | |
| CH-920 | Yangzhou Chenhua New Material CO., LTD. | CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating. | |
| CH-940 | Yangzhou Chenhua New Material CO., LTD. | CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating. | |
| D-230 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-230 Polyether Amine is a diamine on the base of copolymer backbone with an average molecular weight of 220. This product has a specific gravity of 0.9080 g/cm3 and a pH value of 11.6. D-230 Polyether Amine provides light color, low viscosity, low vapor ...展开 D-230 Polyether Amine is a diamine on the base of copolymer backbone with an average molecular weight of 220. This product has a specific gravity of 0.9080 g/cm3 and a pH value of 11.6. D-230 Polyether Amine provides light color, low viscosity, low vapor pressure, and high primary amine content to coatings and adhesives. 收起 | |
| D-400 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether ...展开 D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether Amine acts as a curing agent which provides flexibility and toughness in adhesives. 收起 | |
| DIBUTYL PHTHALATE (DBP) | Aekyung Petrochemical Co., Ltd. | DIBUTYL PHTHALATE (DBP) is a common plasticizer for PVC. This product is highly compatible with other resins. It is used in construction materials, paint, adhesives, and lubricants. | |
| DIOCTYL PHTHALATE (DOP) | Aekyung Petrochemical Co., Ltd. | DIOCTYL PHTHALATE (DOP), otherwise known as DI-2-ETHYLHEXYL PHTHALATE, is the most common plasticizing additive for phthalate. This product is compatible with PVC and PVA. It can be used in paints, leather, PVC films, plastic products and electrical wire...展开 DIOCTYL PHTHALATE (DOP), otherwise known as DI-2-ETHYLHEXYL PHTHALATE, is the most common plasticizing additive for phthalate. This product is compatible with PVC and PVA. It can be used in paints, leather, PVC films, plastic products and electrical wire applications. 收起 | |
| DMMP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | DMMP Flame Retardant is dimethyl methyl phosphonate, a colorless to yellow, transparent liquid. This product has a specific gravity of 1.16 and a molecular weight of 124.08. This product provides flame retardant properties as a coating. | |
| ED-2003 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | ED-2003 Polyether Amine is a water soluble, aliphatic, diamine which appears as a white, waxy solid. This product has a molecular weight of 2000 and a water weight percentage of 0.35. ED-2003 Polyether Amine provides low color and vapor pressure, water so...展开 ED-2003 Polyether Amine is a water soluble, aliphatic, diamine which appears as a white, waxy solid. This product has a molecular weight of 2000 and a water weight percentage of 0.35. ED-2003 Polyether Amine provides low color and vapor pressure, water solubility, and reactivity to water-based coatings. 收起 | |
| ED-600 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | ED-600 Polyether Amine is an aliphatic polyether diamine which appears as a colorless to light yellow liquid with a slight haze. This product has a molecular weight of 600 and pH value between 11 and 12. ED-600 Polyether Amine is used in the preparation o...展开 ED-600 Polyether Amine is an aliphatic polyether diamine which appears as a colorless to light yellow liquid with a slight haze. This product has a molecular weight of 600 and pH value between 11 and 12. ED-600 Polyether Amine is used in the preparation or bio compatible articles and coatings. 收起 | |
| ED-900 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | ED-900 Polyether Amine is a colorless to light yellow aliphatic polyether diamine which is water soluble. This product has a molecular weight of 900 and a melting point which is close to room temperature. ED-900 Polyether Amine provides flexibility, hydr...展开 ED-900 Polyether Amine is a colorless to light yellow aliphatic polyether diamine which is water soluble. This product has a molecular weight of 900 and a melting point which is close to room temperature. ED-900 Polyether Amine provides flexibility, hydrophilicity, reactivity, and biocompatability to coatings. 收起 | |
| GH-AS-C2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibil...展开 GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-C2-F | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high ...展开 GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-C2-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with ...展开 GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-D | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-D, in the form of a clear sticky solution, is a polyurethane modified acrylic resin. It is applicable to the production of alcohol and water-soluble gravure printing ink for extrusion lamination with environmental protection. | |
| GH-AS-SY-X | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibilit...展开 GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, wi...展开 GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W2A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJ | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibil...展开 GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJ-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability,...展开 GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJB-4 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product h...展开 GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has low viscosity (700 to 1200 mPas), no dispersing agent needed, and good print-ability. 收起 | |
| GH-ASJB-4Y | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product ...展开 GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起 | |
| GH-ASJB-4Y-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This produc...展开 GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起 | |
| GH-ASJG-A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitabl...展开 GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起 | |
| GH-ASJG-B | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitab...展开 GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起 | |
| GH-FF | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-FF, in the form of a clear solution, is a kind of green environmental protection, anti-corrosion coatings resin. It has good anti-corrosive performance and can be widely applied to anti-corrosion coating, in the metal. | |
| GH-OH-1015 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-1503 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-2607 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-3005 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-4007 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-PU-1 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-PU-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-PU-3 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-TCJ-1 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-TCJ-1, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 600 to 1200 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and cont...展开 GH-TCJ-1, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 600 to 1200 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and containers. 收起 | |
| GH-TCJ-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-TCJ-2, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 400 to 1000 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and cont...展开 GH-TCJ-2, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 400 to 1000 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and containers. 收起 | |
| GH-WPU | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing g...展开 GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing glue. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| M-2070 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | M-2070 Polyether Amine is a colorless to light yellow monoamine which is based on copolymer backbone. This product has an average molecular weight of about 2000 and a PO/EO ratio of 10/31. M-2070 Polyether Amine provides surfactant properties and water so...展开 M-2070 Polyether Amine is a colorless to light yellow monoamine which is based on copolymer backbone. This product has an average molecular weight of about 2000 and a PO/EO ratio of 10/31. M-2070 Polyether Amine provides surfactant properties and water solubility to adhesives. 收起 | |
| Maleic Anhydride (MA) | Aekyung Petrochemical Co., Ltd. | Maleic Anhydride (MA) is used as an ingredient in Unsaturated Polyester Resins. The resulting resins can be used in automotive coatings, inks, and paints. | |
| T-3000 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | T-3000 Polyether Amine is a colorless to pale yellow primary polyether triamine. This product has an approximate molecular weight of 3000 and a water weight percentage of 0.25. T-3000 Polyether Amine works as an adhesion promoter in coatings. | |
| T-5000 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | T-5000 Polyether Amine is a primary polyether triamine which appears as a colorless to pale yellow liquid with a slight haze. This product is has a molecular weight of 5000 and a water weight percentage of less than 25. T-5000 Polyether Amine is used in c...展开 T-5000 Polyether Amine is a primary polyether triamine which appears as a colorless to pale yellow liquid with a slight haze. This product is has a molecular weight of 5000 and a water weight percentage of less than 25. T-5000 Polyether Amine is used in coatings and acts as an adhesive in epoxy systems. 收起 | |
| TCEP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardan...展开 TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardant properties as a nitrocellulose varnish additive due to its plasticization. 收起 | |
| TCPP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | TCPP Flame Retardant is a colorless to yellowish, oily liquid with a molecular weight of 327.56. This product has an aquatic solubility of 1.6g/l at 20 degrees Celsius and is insoluble in aliphatic hydrocarbons. This product acts as a flame retardant in c...展开 TCPP Flame Retardant is a colorless to yellowish, oily liquid with a molecular weight of 327.56. This product has an aquatic solubility of 1.6g/l at 20 degrees Celsius and is insoluble in aliphatic hydrocarbons. This product acts as a flame retardant in coatings. 收起 |
