| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| GENGLAZE® EC-2447 | Synthomer | GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally f...展开 GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| MOR-SHINE™ 4U | Synthomer | MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and...展开 MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and high maintenance schedules. 收起 | |
| MOR-SHINE™ ULTRA CSG | Synthomer | MOR-SHINE™ ULTRA CSG is a concentrated surface protectant for use on polished or decorative concrete surfaces. MOR-SHINE™ ULTRA CSG penetrates into functional concrete surfaces and provides excellent durability and protection from stains and abrasion. | |
| PLIOLITE® AC80 | Synthomer | PLIOLITE® AC80, often used in combination with PLIOLITE® AC4 or PLIOLITE® AC5G, forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties. Newtonian resin for exterior masonry coati...展开 PLIOLITE® AC80, often used in combination with PLIOLITE® AC4 or PLIOLITE® AC5G, forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties. Newtonian resin for exterior masonry coatings, anticarbonation, metal protective and intumescent coatings. 收起 | |
| POLYFOX™ PF-136A | Synthomer | POLYFOX™ PF-136A is an anionic fluorinated (CF3) polyether diammonium sulfate for aqueous formulations. POLYFOX™ PF-136A wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, floor finish, and ink applications. | |
| POLYFOX™ PF-154N | Synthomer | POLYFOX™ PF-154N is a 25 % active Nonionic fluorinated (C2F5) polyether ethoxylated. POLYFOX™ PF-154N wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, ink, and electronics applications. | |
| POLYFOX™ PF-156A | Synthomer | POLYFOX™ PF-156A is an anionic fluorinated (C2F5) polyether diammonium disulfate for aqueous formulations. POLYFOX™ PF-156A wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, floor finish, and ink applications. | |
| POLYFOX™ PF-159 | Synthomer | POLYFOX™ PF-159 is a 100 % active Nonionic fluorinated (C2F5) polyether ethoxylated. POLYFOX™ PF-159 highly efficient wetting, flow and leveling agent is suitable for use in a broad variety of aqueous, solvent, 100% solid coating, ink, and adhesive applic...展开 POLYFOX™ PF-159 is a 100 % active Nonionic fluorinated (C2F5) polyether ethoxylated. POLYFOX™ PF-159 highly efficient wetting, flow and leveling agent is suitable for use in a broad variety of aqueous, solvent, 100% solid coating, ink, and adhesive applications. 收起 | |
| POLYFOX™ PF-2002 | Synthomer | POLYFOX™ PF-2002 is an anionic fluorinated (C2F5) polyether diammonium disulfate for aqueous formulations. POLYFOX™ PF-2002 wetting, flow and leveling agent is designed for US DfE compliant floor finish applications. | |
| POLYFOX™ PF-2003 | Synthomer | POLYFOX™ PF-2003 is an anionic fluorinated (CF3) polyether diammonium disulfate for aqueous formulations. POLYFOX™ PF-2003 wetting, flow and leveling agent is designed for US DfE compliant floor finish applications. | |
| POLYFOX™ PF-6320 | Synthomer | POLYFOX™ PF-6320 is a solvent soluble diol functional fluorinated (CF3) polyether diol terminated. POLYFOX™ PF-6320 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, ele...展开 POLYFOX™ PF-6320 is a solvent soluble diol functional fluorinated (CF3) polyether diol terminated. POLYFOX™ PF-6320 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants. 收起 | |
| POLYFOX™ PF-636 | Synthomer | POLYFOX™ PF-636 is a solvent soluble diol functional fluorinated (CF3) polyether diol terminated. POLYFOX™ PF-636 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, elect...展开 POLYFOX™ PF-636 is a solvent soluble diol functional fluorinated (CF3) polyether diol terminated. POLYFOX™ PF-636 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants. 收起 | |
| POLYFOX™ PF-652-NF | Synthomer | POLYFOX™ PF-652-NF is a 50% active solvent soluble fluorinated (C2F5) ethoxylate A-B-A tri-block copolymer. POLYFOX™ PF-652-NF wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adh...展开 POLYFOX™ PF-652-NF is a 50% active solvent soluble fluorinated (C2F5) ethoxylate A-B-A tri-block copolymer. POLYFOX™ PF-652-NF wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, and litho plate coatings. 收起 | |
| POLYFOX™ PF-6520 | Synthomer | POLYFOX™ PF-6520 is a solvent soluble diol functional fluorinated (C2F5) polyether diol terminated. POLYFOX™ PF-6520 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, el...展开 POLYFOX™ PF-6520 is a solvent soluble diol functional fluorinated (C2F5) polyether diol terminated. POLYFOX™ PF-6520 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants. 收起 | |
| POLYFOX™ PF-656 | Synthomer | POLYFOX™ PF-656 is a solvent soluble diol functional fluorinated (C2F5) polyether diol terminated. POLYFOX™ PF-656 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, elec...展开 POLYFOX™ PF-656 is a solvent soluble diol functional fluorinated (C2F5) polyether diol terminated. POLYFOX™ PF-656 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants. 收起 |
