| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| GH-AS-C2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibil...展开 GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-C2-F | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high ...展开 GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-C2-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with ...展开 GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-D | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-D, in the form of a clear sticky solution, is a polyurethane modified acrylic resin. It is applicable to the production of alcohol and water-soluble gravure printing ink for extrusion lamination with environmental protection. | |
| GH-AS-SY-X | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibilit...展开 GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, wi...展开 GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W2A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJ | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibil...展开 GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJ-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability,...展开 GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJB-4 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product h...展开 GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has low viscosity (700 to 1200 mPas), no dispersing agent needed, and good print-ability. 收起 | |
| GH-ASJB-4Y | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product ...展开 GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起 | |
| GH-ASJB-4Y-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This produc...展开 GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起 | |
| GH-ASJG-A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitabl...展开 GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起 | |
| GH-ASJG-B | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitab...展开 GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起 | |
| GH-FF | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-FF, in the form of a clear solution, is a kind of green environmental protection, anti-corrosion coatings resin. It has good anti-corrosive performance and can be widely applied to anti-corrosion coating, in the metal. | |
| GH-OH-1015 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-1503 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-2607 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-3005 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-4007 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-PU-1 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-PU-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-PU-3 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-TCJ-1 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-TCJ-1, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 600 to 1200 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and cont...展开 GH-TCJ-1, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 600 to 1200 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and containers. 收起 | |
| GH-TCJ-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-TCJ-2, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 400 to 1000 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and cont...展开 GH-TCJ-2, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 400 to 1000 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and containers. 收起 | |
| GH-WPU | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing g...展开 GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing glue. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Yipin® Aluminium Triphosphate SAP-1 | Yipin Pigments, Inc. | Yipin® Aluminium Triphosphate SAP-1 is an anti-corrosion pigment in the form of a white powder. It has an aluminium content of 10.5 percent and a phosphate content of 42.5 percent. This product can be used in a variety of coating applications. | |
| Yipin® Aluminium Triphosphate SAP-2 | Yipin Pigments, Inc. | Yipin® Aluminium Triphosphate SAP-2 is an anti-corrosion pigment in the form of a white powder. It has an aluminium content of 8 percent and a phosphate content of 30.5 percent. This product can be used in a variety of coating applications. | |
| Yipin® Anatase SA10 | Yipin Pigments, Inc. | Yipin® Anatase SA10 is a white titanium dioxide pigment in the form of a white powder. It displays spherical particle shape and 98 percent purity. This product can be used in a variety of coating applications. | |
| Yipin® Apple Green Y9435 | Yipin Pigments, Inc. | Yipin® Apple Green Y9435 is a green pearlescent pigment in powder form. It has good heat and light resistance and provides a bright green luster. This product can be used in a variety of coating and ink applications. | |
| Yipin® Black Pearl S363 | Yipin Pigments, Inc. | Yipin® Black Pearl S363 is a black pigment powder. It is made from a mix of black pigments and offers both acid and alkali resistance. This product can be used in a variety of paint and coating applications. | |
| Yipin® Blackish Green Y9408 | Yipin Pigments, Inc. | Yipin® Blackish Green Y9408 is a very dark green pearlescent pigment in powder form. It has good heat and light resistance and provides a bright silver luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Blue D7079 | Yipin Pigments, Inc. | Yipin® Blue D7079 is a blue beta phthalocyanine pigment in powder form. It has a pH value of 6.5-8, a density of 1.59 g/cm³, and a specific surface area of 62 m²/g. This product can be use in ink applications. | |
| Yipin® Blue FR6840 | Yipin Pigments, Inc. | Yipin® Blue FR6840 is a blue alpha unstable phthalocyanine pigment in powder form. It has a pH value of 5.8-8, a density of 1.6 g/cm³, and a specific surface area of 66 m²/g. This product can be used in water-based ink applications. | |
| Yipin® Blue L6875F | Yipin Pigments, Inc. | Yipin® Blue L6875F is a blue alpha stable phthalocyanine pigment in powder form. It has a pH value of 6.5-9, a density of 1.6 g/cm³, and a specific surface area of 52 m²/g. This product can be used in paint and coating applications. | |
| Yipin® Blue L6905F | Yipin Pigments, Inc. | Yipin® Blue L6905F is a blue alpha stable phthalocyanine pigment in powder form. It has a pH value of 6.5-9, a density of 1.6 g/cm³, and a specific surface area of 76 m²/g. This product can be used in paint and coating applications. | |
| Yipin® Blue L6920 | Yipin Pigments, Inc. | Yipin® Blue L6920 is a blue alpha stable phthalocyanine pigment in powder form. It has a pH value of 6.5-9, a density of 1.6 g/cm³, and a specific surface area of 72 m²/g. This product can be used in paint and coating applications. | |
| Yipin® Blue L7101F | Yipin Pigments, Inc. | Yipin® Blue L7101F is a blue beta phthalocyanine pigment in powder form. It has a pH value of 6.5-9, a density of 1.6 g/cm³, and a specific surface area of 64 m²/g. This product can be used in paint and coating applications. | |
| Yipin® Blue Pearl Y9225 | Yipin Pigments, Inc. | Yipin® Blue Pearl Y9225 is a blue pearlescent pigment in powder form. It has good heat and light resistance and provides a bright blue luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Bronze Satin Y9520 | Yipin Pigments, Inc. | Yipin® Bronze Satin Y9520 is a bronze, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a satin bronze luster. This product can be used in coating and ink applications. | |
| Yipin® Bronze Y9500 | Yipin Pigments, Inc. | Yipin® Bronze Y9500 is a bronze, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a bright bronze luster. This product can be used in coating and ink applications. | |
| Yipin® Bronze-Brown Y9410 | Yipin Pigments, Inc. | Yipin® Bronze-Brown Y9410 is a brown-bronze pearlescent pigment in powder form. It has good heat and light resistance and provides a bright bronze-brown luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Brown-Red Y9502 | Yipin Pigments, Inc. | Yipin® Brown-Red Y9502 is a brown-red, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a bright brown-red luster. This product can be used in coating and ink applications. | |
| Yipin® Chrome Orange 115N | Yipin Pigments, Inc. | Yipin® Chrome Orange 115N is an orange-yellow lead chromate pigment in powder form. It has a pH value of 4-8 and is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. | |
| Yipin® Chrome Orange 350-T | Yipin Pigments, Inc. | Yipin® Chrome Orange 350-T is an orange-yellow lead chromate pigment in powder form. It has a pH value of 6-8 and a light fastness value of 6-7. This product can be used in paint and coating applications. | |
| Yipin® Complex Blue S463 | Yipin Pigments, Inc. | Yipin® Complex Blue S463 is a blue pigment powder. It is made from a mix of blue and white pigments and offers both acid and alkali resistance. This product can be used in paint and coating applications. | |
| Yipin® Complex Blue S466 | Yipin Pigments, Inc. | Yipin® Complex Blue S466 is a blue pigment powder. It is made from a mix of blue, red, and black pigments and offers both acid and alkali resistance. This product can be used in paint and coating applications. | |
| Yipin® Complex Green S5605-1B | Yipin Pigments, Inc. | Yipin® Complex Green S5605-1B is a green pigment powder. It contains a maximum of 3% water soluble content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and blue pigments and offers both acid and alkali resistance. This product can...展开 Yipin® Complex Green S5605-1B is a green pigment powder. It contains a maximum of 3% water soluble content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and blue pigments and offers both acid and alkali resistance. This product can be used in paint and coating applications. 收起 | |
| Yipin® Complex Green S5605-2B | Yipin Pigments, Inc. | Yipin® Complex Green S5605-2B is a green pigment powder. It contains a maximum of 3% water content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and blue pigments and offers both acid and alkali resistance. This product can be used...展开 Yipin® Complex Green S5605-2B is a green pigment powder. It contains a maximum of 3% water content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and blue pigments and offers both acid and alkali resistance. This product can be used in paint and coating applications. 收起 | |
| Yipin® Complex Green S5605-3B | Yipin Pigments, Inc. | Yipin® Complex Green S5605-3B is a green pigment powder. It contains a maximum of 3% water soluble content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and blue pigments and offers both acid and alkali resistance. This product can...展开 Yipin® Complex Green S5605-3B is a green pigment powder. It contains a maximum of 3% water soluble content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and blue pigments and offers both acid and alkali resistance. This product can be used in paint and coating applications. 收起 | |
| Yipin® Complex Green S561B | Yipin Pigments, Inc. | Yipin® Complex Green S561B is a green pigment powder. It contains a maximum of 3% water soluble content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and green pigments and offers both acid and alkali resistance. This product can b...展开 Yipin® Complex Green S561B is a green pigment powder. It contains a maximum of 3% water soluble content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and green pigments and offers both acid and alkali resistance. This product can be used in paint and coating applications. 收起 | |
| Yipin® Complex Green S562B | Yipin Pigments, Inc. | Yipin® Complex Green S562B is a green pigment powder. It contains a maximum of 3% water soluble content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and green pigments and offers both acid and alkali resistance. This product can b...展开 Yipin® Complex Green S562B is a green pigment powder. It contains a maximum of 3% water soluble content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and green pigments and offers both acid and alkali resistance. This product can be used in paint and coating applications. 收起 | |
| Yipin® Complex Green S564B | Yipin Pigments, Inc. | Yipin® Complex Green S564B is a green pigment powder. It contains a maximum of 3% water soluble content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and blue pigments and offers both acid and alkali resistance. This product can be...展开 Yipin® Complex Green S564B is a green pigment powder. It contains a maximum of 3% water soluble content, 0.5% sieve residue, and 1% moisture. It is made from a mix of yellow and blue pigments and offers both acid and alkali resistance. This product can be used in paint and coating applications. 收起 | |
| Yipin® Deep Chrome Yellow 124 | Yipin Pigments, Inc. | Yipin® Deep Chrome Yellow 124 is a yellow lead chromate pigment in powder form. It is stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. | |
| Yipin® Deep Chrome Yellow 300-T | Yipin Pigments, Inc. | Yipin® Deep Chrome Yellow 300-T is a yellow lead chromate pigment in powder form. It has a pH value of 6-8 and a light fastness value of 4-5. This product can be used in paint and coating applications. | |
| Yipin® Fine Gold Satin Y9201 | Yipin Pigments, Inc. | Yipin® Fine Gold Satin Y9201 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a satin yellow luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Glitter Bronze Y9530 | Yipin Pigments, Inc. | Yipin® Glitter Bronze Y9530 is a bronze, micaceous iron, pearlescent pigment in powder form. It has good heat and light resistance and provides a shimmery, flashing bronze luster. This product can be used in coating and ink applications. | |
| Yipin® Glitter Gold Y9355 | Yipin Pigments, Inc. | Yipin® Glitter Gold Y9355 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a sparkling, flashing golden luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Gold Pearl Y9300 | Yipin Pigments, Inc. | Yipin® Gold Pearl Y9300 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a bright pearl golden luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Gold Satin Y9302 | Yipin Pigments, Inc. | Yipin® Gold Satin Y9302 is a gold pearlescent pigment in powder form. It has good heat and light resistance and provides a stain satin golden luster to desired formulations. This product can be used in coating and ink applications. | |
| Yipin® Green Chrome SGC | Yipin Pigments, Inc. | Yipin® Green Chrome SGC is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be u...展开 Yipin® Green Chrome SGC is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 | |
| Yipin® Green Chrome SGC-M | Yipin Pigments, Inc. | Yipin® Green Chrome SGC-M is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.1%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be...展开 Yipin® Green Chrome SGC-M is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.1%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 | |
| Yipin® Green Chrome SGN | Yipin Pigments, Inc. | Yipin® Green Chrome SGN is a green chrome oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.1%, and a pH value of 6-8. It is very stable with strong tinting capabilities. This product can be use...展开 Yipin® Green Chrome SGN is a green chrome oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.1%, and a pH value of 6-8. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 | |
| Yipin® Green Chrome SGP | Yipin Pigments, Inc. | Yipin® Green Chrome SGP is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be u...展开 Yipin® Green Chrome SGP is a green chrome oxide pigment in powder form. It has water soluble content of no more than 0.3%, sieve residue of no more than 0.3%, and a pH value of 4-7. It is very stable with strong tinting capabilities. This product can be used in coating, ink, and print applications. 收起 | |
| Yipin® Green L8710 | Yipin Pigments, Inc. | Yipin® Green L8710 is a green halogenated phthalocyanine pigment in powder form. It has a pH value of 6.5-8, a density of 2.1 g/cm³, and a specific surface area of 61 m²/g. This product can be used in paint and coating applications. | |
| Yipin® Green Pearl Y9235 | Yipin Pigments, Inc. | Yipin® Green Pearl Y9235 is a green pearlescent pigment in powder form. It has a particle size range of 10-60 µm, water soluble content of no more than 0.3%, and a pH value of 6-9. It has good heat and light resistance and provides a bright green luster t...展开 Yipin® Green Pearl Y9235 is a green pearlescent pigment in powder form. It has a particle size range of 10-60 µm, water soluble content of no more than 0.3%, and a pH value of 6-9. It has good heat and light resistance and provides a bright green luster to desired formulations. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black 353 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 353 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is...展开 Yipin® Iron Oxide Black 353 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1.0%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black 357 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 357 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 95%. It is very stable with good tinting capabiliti...展开 Yipin® Iron Oxide Black 357 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 95%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black 370 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 370 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is v...展开 Yipin® Iron Oxide Black 370 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black 4330 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 4330 is a synthetic black iron oxide pigment in fine powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.3%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm....展开 Yipin® Iron Oxide Black 4330 is a synthetic black iron oxide pigment in fine powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.3%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It facilitates quicker and more even dispersion. This product can be used in coating applications. 收起 | |
| Yipin® Iron Oxide Black 4330-3 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 4330-3 is a synthetic black iron oxide pigment in fine powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.3%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µ...展开 Yipin® Iron Oxide Black 4330-3 is a synthetic black iron oxide pigment in fine powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.3%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It facilitates quicker and more even dispersion. This product can be used in coating applications. 收起 | |
| Yipin® Iron Oxide Black 723 | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 723 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is v...展开 Yipin® Iron Oxide Black 723 is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black 733J | Yipin Pigments, Inc. | Yipin® Iron Oxide Black 733J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is ...展开 Yipin® Iron Oxide Black 733J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, iron oxide content of at least 95%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black S330M | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S330M is a high performance synthetic black iron oxide pigment in fine powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.05%, iron oxide content of at least 94%, and a predominant parti...展开 Yipin® Iron Oxide Black S330M is a high performance synthetic black iron oxide pigment in fine powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.05%, iron oxide content of at least 94%, and a predominant particle size of 0.2 µm. It allows for faster mixing times and quicker dispersion. This product can be used in coating applications. 收起 | |
| Yipin® Iron Oxide Black S722A | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S722A is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It ...展开 Yipin® Iron Oxide Black S722A is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.1%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black S722J | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S722J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of 0.5%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It is very stable ...展开 Yipin® Iron Oxide Black S722J is a synthetic black iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of 0.5%, iron oxide content of at least 92%, and a predominant particle size of 0.2 µm. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black S733-DG | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S733-DG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron ...展开 Yipin® Iron Oxide Black S733-DG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron oxide content of at least 87%. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Black S733-WG | Yipin Pigments, Inc. | Yipin® Iron Oxide Black S733-WG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron ...展开 Yipin® Iron Oxide Black S733-WG is a granular, synthetic black iron oxide pigment that has been developed with low dust technologies to make it safer for employees to work with. It has water soluble content of no more than 4%, a pH value of 3-7, and iron oxide content of at least 87%. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Brown 4686 | Yipin Pigments, Inc. | Yipin® Iron Oxide Brown 4686 is a synthetic brown iron oxide pigment in fine powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.05%, and iron oxide content of at least 95%. It facilitates quicker and more even ...展开 Yipin® Iron Oxide Brown 4686 is a synthetic brown iron oxide pigment in fine powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.05%, and iron oxide content of at least 95%. It facilitates quicker and more even dispersion. This product can be used in coating applications. 收起 | |
| Yipin® Iron Oxide Brown S610 | Yipin Pigments, Inc. | Yipin® Iron Oxide Brown S610 is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 88%. It is very stable with good tinting capabilit...展开 Yipin® Iron Oxide Brown S610 is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 88%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Brown S660(860) | Yipin Pigments, Inc. | Yipin® Iron Oxide Brown S660(860) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capa...展开 Yipin® Iron Oxide Brown S660(860) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Brown S686(868) | Yipin Pigments, Inc. | Yipin® Iron Oxide Brown S686(868) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capa...展开 Yipin® Iron Oxide Brown S686(868) is a synthetic brown iron oxide pigment in powder form. It has water soluble content of no more than 1%, sieve residue of no more than 0.5%, and iron oxide content of at least 94%. It is very stable with good tinting capabilities. This product can be used in coating and ink applications. 收起 | |
| Yipin® Iron Oxide Orange 4960 | Yipin Pigments, Inc. | Yipin® Iron Oxide Orange 4960 is a synthetic orange iron oxide pigment in fine powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.05%, iron oxide content of at least 86%, and a pH value of 5-7. It facilitates q...展开 Yipin® Iron Oxide Orange 4960 is a synthetic orange iron oxide pigment in fine powder form. It has water soluble content of no more than 0.5%, sieve residue of no more than 0.05%, iron oxide content of at least 86%, and a pH value of 5-7. It facilitates quicker and more even dispersion. This product can be used in coating applications. 收起 |
