| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Barium Chloride | BassTech International | Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the man...展开 Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the manufacture of pigments, oil lubricants, PVC stabilizers and in the manufacture of other barium salts, such as Barium Sulfate, Barium Chromate and Barium Fluoride. 收起 | |
| Barium Neodecanoate (EGECat Ba 10%) | EGE Kimya San ve Tic A.S. | Barium Neodecanoate (EGECat Ba 10%) is a clear liquid that consists of neodecanoic acid barium salt. This product is typically used as a replacement for lead (Pb) in free coatings. It also helps promote thorough drying, good pigment wetting properties, an...展开 Barium Neodecanoate (EGECat Ba 10%) is a clear liquid that consists of neodecanoic acid barium salt. This product is typically used as a replacement for lead (Pb) in free coatings. It also helps promote thorough drying, good pigment wetting properties, and it can increase the stability of the coating. 收起 | |
| Barium Neodecanoate (EGECat Ba 12.5%) | EGE Kimya San ve Tic A.S. | Barium Neodecanoate (EGECat Ba 12.5%) is a clear liquid that consists of neodecanoic acid barium salt. This product is typically used as a replacement for lead (Pb) in free coatings. It also helps promote thorough drying, good pigment wetting properties, ...展开 Barium Neodecanoate (EGECat Ba 12.5%) is a clear liquid that consists of neodecanoic acid barium salt. This product is typically used as a replacement for lead (Pb) in free coatings. It also helps promote thorough drying, good pigment wetting properties, and it can increase the stability of the coating. 收起 | |
| Barium Nitrate | BassTech International | Barium Nitrate is a salt of barium and the nitrate ion, with chemical formula Ba(NO3)2 which appears as a white solid. This product is used in paint, coatings, and inks. | |
| Barium Octoate (EGEDry 1A2221) | EGE Kimya San ve Tic A.S. | Barium Octoate (EGEDry 1A2221) is a clear liquid that consists of barium octoate. This product is often used as a replacement for lead in free coatings. It can provide thorough drying, good pigment wetting properties, gloss, and increase the stability of ...展开 Barium Octoate (EGEDry 1A2221) is a clear liquid that consists of barium octoate. This product is often used as a replacement for lead in free coatings. It can provide thorough drying, good pigment wetting properties, gloss, and increase the stability of coatings. It is soluble in organic solvent and oils, and has a barium metal content of 12.5% and a total solids content of 47.5%. 收起 | |
| Bismuth Octoate (EGECat Bi 24%) | EGE Kimya San ve Tic A.S. | Bismuth Octoate (EGECat Bi 24%) is a catalyst that is used in polyurethane applications. This product is soluble in organic solvent and oils, and has a bismuth metal content of 24% and a total solids content of 100%. | |
| Blanc Fixe | BassTech International | Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consi...展开 Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consistency, depending on the application and grade. 收起 | |
| Budit 3 | BassTech International | Budit 3 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 3H | BassTech International | Budit 3H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4 | BassTech International | Budit 4 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4H | BassTech International | Budit 4H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6 | BassTech International | Budit 6 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6H | BassTech International | Budit 6H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7 | BassTech International | Budit 7 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7H | BassTech International | Budit 7H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 8H | BassTech International | Budit 8H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 9 | BassTech International | Budit 9 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Calcium Octoate (EGEDry 135151) | EGE Kimya San ve Tic A.S. | Calcium Octoate (EGEDry 135151) is a clear liquid that consists of calcium octoate. This product is often used as an auxiliary drier and good wetting agent that can reduce loss of drying. It can improve drying characteristics at low temperature and high h...展开 Calcium Octoate (EGEDry 135151) is a clear liquid that consists of calcium octoate. This product is often used as an auxiliary drier and good wetting agent that can reduce loss of drying. It can improve drying characteristics at low temperature and high humidity and be used in combination with lead. It is soluble in organic solvent and oils, and has a calcium metal content of 5% and a total solids content of 23.8%. 收起 | |
| Calcium Octoate (EGEDry 135201-1) | EGE Kimya San ve Tic A.S. | Calcium Octoate (EGEDry 135201-1) is a clear liquid that consists of calcium octoate. This product is often used as an auxiliary drier and good wetting agent that can reduce loss of drying. It can improve drying characteristics at low temperature and high...展开 Calcium Octoate (EGEDry 135201-1) is a clear liquid that consists of calcium octoate. This product is often used as an auxiliary drier and good wetting agent that can reduce loss of drying. It can improve drying characteristics at low temperature and high humidity and be used in combination with lead. It is soluble in organic solvent and oils, and has a calcium metal content of 10% and a total solids content of 45.3%. 收起 | |
| Cobalt Neodecanoate (EGECat Co 10%) | EGE Kimya San ve Tic A.S. | Cobalt Neodecanoate (EGECat Co 10%) is a strong oxidation catalyst that consists of neodecanoic acid and cobalt salt. This product is often used as a polyester accelerator in UPR systems. It is soluble in organic solvent and oils, and has a cobalt metal c...展开 Cobalt Neodecanoate (EGECat Co 10%) is a strong oxidation catalyst that consists of neodecanoic acid and cobalt salt. This product is often used as a polyester accelerator in UPR systems. It is soluble in organic solvent and oils, and has a cobalt metal content of 10% and a total solids content of 60%. 收起 | |
| Cobalt Neodecanoate (EGECat Co 12%) | EGE Kimya San ve Tic A.S. | Cobalt Neodecanoate (EGECat Co 12%) is a strong oxidation catalyst that consists of neodecanoic acid and cobalt salt. This product is often used as a polyester accelerator in UPR systems. It is soluble in organic solvent and oils, and has a cobalt metal c...展开 Cobalt Neodecanoate (EGECat Co 12%) is a strong oxidation catalyst that consists of neodecanoic acid and cobalt salt. This product is often used as a polyester accelerator in UPR systems. It is soluble in organic solvent and oils, and has a cobalt metal content of 12% and a total solids content of 74%. 收起 | |
| Cobalt Octoate (EGECat Co 0.5%, in Styrene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 0.5%, in Styrene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 0.5% and a total solids content of 5%. | |
| Cobalt Octoate (EGECat Co 0.5%, in TXIB) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 0.5%, in TXIB) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 0.5% and a total solids content of 100%. | |
| Cobalt Octoate (EGECat Co 0.5%, in WS) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 0.5%, in WS) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 0.5% and a total solids content of 5%. | |
| Cobalt Octoate (EGECat Co 0.5%, in Xylene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 0.5%, in Xylene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 0.5% and a total solids content of 5%. | |
| Cobalt Octoate (EGECat Co 1%, in Styrene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 1%, in Styrene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 1% and a total solids content of 6%. | |
| Cobalt Octoate (EGECat Co 1%, in Toluene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 1%, in Toluene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 1% and a total solids content of 5%. | |
| Cobalt Octoate (EGECat Co 1%, in TXIB) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 1%, in TXIB) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 1% and a total solids content of 100%. | |
| Cobalt Octoate (EGECat Co 1%, in WS) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 1%, in WS) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 1% and a total solids content of 10%. | |
| Cobalt Octoate (EGECat Co 1%, in Xylene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 1%, in Xylene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 1% and a total solids content of 10%. | |
| Cobalt Octoate (EGECat Co 10%, in Toluene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 10%, in Toluene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 10% and a total solids content of 60%. | |
| Cobalt Octoate (EGECat Co 10%, in TXIB) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 10%, in TXIB) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 10% and a total solids content of 100%. | |
| Cobalt Octoate (EGECat Co 10%, in WS) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 10%, in WS) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 10% and a total solids content of 65%. | |
| Cobalt Octoate (EGECat Co 10%, in Xylene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 10%, in Xylene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 10% and a total solids content of 65%. | |
| Cobalt Octoate (EGECat Co 12%, in D60) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 12%, in D60) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 12% and a total solids content of 80%. | |
| Cobalt Octoate (EGECat Co 12%, in WS) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 12%, in WS) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 12% and a total solids content of 80%. | |
| Cobalt Octoate (EGECat Co 12%, in Xylene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 12%, in Xylene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 12% and a total solids content of 80%. | |
| Cobalt Octoate (EGECat Co 4%, in Styrene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 4%, in Styrene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 4% and a total solids content of 25%. | |
| Cobalt Octoate (EGECat Co 6%, in Spindle Oil) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 6%, in Spindle Oil) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 6% and a total solids content of 100%. | |
| Cobalt Octoate (EGECat Co 6%, in Toluene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 6%, in Toluene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 6% and a total solids content of 37%. | |
| Cobalt Octoate (EGECat Co 6%, in TXIB) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 6%, in TXIB) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 6% and a total solids content of 100%. | |
| Cobalt Octoate (EGECat Co 6%, in WS) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 6%, in WS) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 6% and a total solids content of 37%. | |
| Cobalt Octoate (EGECat Co 6%, in Xylene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 6%, in Xylene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 6% and a total solids content of 37%. | |
| Cobalt Octoate (EGECat Co 8%, in Toluene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 8%, in Toluene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 8% and a total solids content of 45%. | |
| Cobalt Octoate (EGECat Co XB) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co XB) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. This product is a clear liquid that has a total solids content of 40%. | |
| Cobalt Octoate (EGECat Co XB-1) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co XB-1) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 4% and a total solids content of 45%. | |
| Cobalt Octoate (EGECat Co XC) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co XC) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. This product is a clear liquid that has a total solids content of 45%. | |
| Cobalt Octoate (EGECat Co XF) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co XF) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. This product is a clear liquid that has a total solids content of 30%. | |
| Cobalt Octoate (EGEDry 112111) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGEDry 112111) is a clear liquid that consists of cobalt octoate. This product is used as an oil-based paint drier and polyester accelerator for unsaturated polyester systems. As the most active metal drier and strong oxidant, cobalt impro...展开 Cobalt Octoate (EGEDry 112111) is a clear liquid that consists of cobalt octoate. This product is used as an oil-based paint drier and polyester accelerator for unsaturated polyester systems. As the most active metal drier and strong oxidant, cobalt improves surface drying and can be used with auxiliary drier components. It has a cobalt metal content of 1% and a total solids content of 6%. 收起 | |
| Cobalt Octoate (EGEDry 112161) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGEDry 112161) is a clear liquid that consists of cobalt octoate. This product is often used as an oil-based paint drier and polyester accelerator. As the most active metal drier and strong oxidant, cobalt improves surface drying and can b...展开 Cobalt Octoate (EGEDry 112161) is a clear liquid that consists of cobalt octoate. This product is often used as an oil-based paint drier and polyester accelerator. As the most active metal drier and strong oxidant, cobalt improves surface drying and can be used with auxiliary drier components. It has a cobalt metal content of 6% and a total solids content of 37%. 收起 | |
| Cobalt Octoate (EGEDry 112201) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGEDry 112201) is a clear liquid that consists of cobalt octoate. This product is often used as an oil-based paint drier and polyester accelerator. As the most active metal drier and strong oxidant, cobalt improves surface drying and can b...展开 Cobalt Octoate (EGEDry 112201) is a clear liquid that consists of cobalt octoate. This product is often used as an oil-based paint drier and polyester accelerator. As the most active metal drier and strong oxidant, cobalt improves surface drying and can be used with auxiliary drier components. It has a cobalt metal content of 10% and a total solids content of 63%. 收起 | |
| Cobalt Octoate (EGEDry 112221) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGEDry 112221) is a clear liquid that consists of cobalt octoate. This product is often used as an oil-based paint drier and polyester accelerator. As the most active metal drier and strong oxidant, cobalt improves surface drying and can b...展开 Cobalt Octoate (EGEDry 112221) is a clear liquid that consists of cobalt octoate. This product is often used as an oil-based paint drier and polyester accelerator. As the most active metal drier and strong oxidant, cobalt improves surface drying and can be used with auxiliary drier components. It has a cobalt metal content of 12% and a total solids content of 76%. 收起 | |
| Copper Octoate (EGECat Copper 6%) | EGE Kimya San ve Tic A.S. | Copper Octoate (EGECat Copper 6%) is a clear liquid that consists of copper octoate. This product is often used as a fungicide in dispersion-based wood coatings. It is soluble in organic solvent and oils and contains 6% copper (Cu) metal. | |
| Copper Octoate (EGEDry 172161) | EGE Kimya San ve Tic A.S. | Copper Octoate (EGEDry 172161) is a clear liquid that consists of copper octoate. This product is often used as a fungicide in dispersion based wood coatings. It is soluble in organic solvent and oils, and has a copper metal content of 6% and a total soli...展开 Copper Octoate (EGEDry 172161) is a clear liquid that consists of copper octoate. This product is often used as a fungicide in dispersion based wood coatings. It is soluble in organic solvent and oils, and has a copper metal content of 6% and a total solids content of 42%. 收起 | |
| Dehydran® P 3615 | BASF Formulation Additives 巴斯夫配方助剂 | 基于烷基聚醚和改性脂肪族化合物的乳液配方用抑泡消泡剂。 | |
| DISPEX® AA 4030 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4030 is an effective polymeric dispersing agent based on acrylic acid ammonium salt. | |
| DISPEX® AA 4135 NA | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| DISPEX® AA 4140 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of ...展开 DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes. 收起 | |
| Dispex® AA S 760 | BASF Formulation Additives 巴斯夫配方助剂 | 水性颜料的分散剂，和聚乙烯丙烯酸，聚乙烯丙烯酸酯，苯乙烯丁二烯和它们的共聚物相容 | |
| Dispex® AA S040 | BASF Formulation Additives 巴斯夫配方助剂 | 用于水性颜填料、色浆及制陶业的润湿分散剂。 | |
| DISPEX® CX 4230 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4230 is a low VOC, low odor hydrophobic dispersant for interior and exterior architectural coatings. It is used to disperse titanium dioxide and extender pigments. It is added levels ranging from 1.05 to 3.0% based on pigment solids. | |
| Dispex® CX 4231 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4231 (以前的Ultradispers® AB 30)是一种羧酸共聚物的多铵盐。它具有显著的憎水性，可减少拖尾和吸水性 | |
| Dispex® CX 4234 | BASF Formulation Additives 巴斯夫配方助剂 | 用于内外墙建筑涂料的疏水性分散剂。 | |
| DISPEX® CX 4240 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in...展开 DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. 收起 | |
| DISPEX® CX 4320 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersi...展开 DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersing inorganic fillers and pigments in high gloss, semi-gloss and highly filled interior paints. It also improves wet-scrub resistance, blocking resistance and has excellent ZnO-compatibility. 收起 | |
| DISPEX® CX 4340 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in wa...展开 DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. 收起 | |
| Dispex® CX 4345 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4345 (以前的Ultradispers® MD 21)是一种高效羧酸共聚物的多钠盐的水溶液。它的憎水性可大大改善其耐湿擦洗性 | |
| DISPEX® CX 4910 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. ...展开 DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. DISPEX® CX 4910 is a sodium salt of an acrylic polymer. For the production of systems, traded as ‘dry systems’, DISPEX® CX 4910 is typically incorporated into the dry powder mix by a normal dry blending operation. Upon wetting of such a ‘dry system’ a waterbased paste/slurry is generated. DISPEX® CX 4910 is effective over a pH range 5-12 and up to temperatures in excess of 100°C. 收起 | |
| Dispex® Ultra FA 4401 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4401 (formerly Pluracoat® Dispersal DA 120) is a non-ionic surfactant with excellent pigment wetting and dispersing properties. It is compatible with other nonionic, anionic, and cationic surfactants. | |
| DISPEX® Ultra FA 4404 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyp...展开 DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyphosphate with those of an organic dispersant thus yielding highly concentrated, stable and low-viscosity inorganic pigment suspensions, e. g. TiO2-slurries. 收起 | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...展开 DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. 收起 | |
| DISPEX® Ultra FA 4420 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal c...展开 DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal colorants for decorative paints. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4420 to the base paints (water and solvent) can increase compatibility and color acceptance and prevents de-wetting of the colorants. DISPEX® Ultra FA 4420 is an activator for Bentonites as well as for associated and acrylic thickeners. 收起 | |
| DISPEX® Ultra FA 4425 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints ...展开 DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints into which they may be incorporated. This results in: maximum color development of the colorant based on DISPEX® Ultra FA 4425, optimum color acceptance of universal colorants in base-paints, and higher pigment loading in colorants. DISPEX® Ultra FA 4425, used as a single wetting and dispersing agent, is considered suitable for VOC-free applications, particularly universal colorants. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4425 to the base paints (water and solvent) can increase compatibility and color acceptance, especially in water-based and ultra-low aromatic content decorative paints. 收起 | |
| Dispex® Ultra FA 4430 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4430 (以前的Lumiten® N-OC 30) 是一种非离子型表面活性剂，可用于改善乳胶漆的储存稳定性及其与水泥和石灰的相容性 | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...展开 DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. 收起 | |
| DISPEX® Ultra FA 4437 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to...展开 DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to-wet substrates. The emulsifying effect of this product also prevents surface defects such as craters, fisheyes, pinholes and streaks caused by incompatible components. Furthermore, DISPEX® Ultra FA 4437 has a strong affinity to pigment surfaces thereby reducing color acceptance problems. 收起 | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra...展开 DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. 收起 | |
| Dispex® Ultra FA 4483 | BASF Formulation Additives 巴斯夫配方助剂 | 无机颜料分散剂和乳胶制备的稳定表面活性剂 | |
| DISPEX® Ultra PA 4503 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- a...展开 DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- and solvent-based decorative paint systems means these concentrates are suitable for the production of tinting systems where only low shear forces (shaking machines) are used. The chemical character of DISPEX® Ultra PA 4503 makes it suitable for systems with a wide pH range (5–12). 收起 | |
| Dispex® Ultra PA 4516 | BASF Formulation Additives 巴斯夫配方助剂 | 开发作为颜料研磨树脂，用于水性油墨。可作为单一树脂组分用于颜料研磨基料，该基料随后可用作开稀阶段使用其他担体的水性油墨基底 | |
| DISPEX® Ultra PA 4550 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. D...展开 DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. DISPEX® Ultra PA 4550 is pH-independent and has a broad compatibility in most commonly used water-based coatings. It is completely water-soluble and does not need to be neutralized. 收起 | |
| DISPEX® Ultra PA 4560 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior...展开 DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. DISPEX® Ultra PA 4560 is, in combination with DISPEX® Ultra PA 4503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). 收起 | |
| Dispex® Ultra PA 4580 | BASF Formulation Additives 巴斯夫配方助剂 | 稳定有机颜料和无机颜料，在色浆中有强降黏效果，提高光泽，防止浮色和发花，提高颜料着色力，抗絮凝 | |
| Dispex® Ultra PA 4590 | BASF Formulation Additives 巴斯夫配方助剂 | 经济型高分子分散剂，用于各类水性工业涂料和颜料色浆中 | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...展开 DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. 收起 | |
| DISPEX® Ultra PX 4575 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra ...展开 DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. 收起 | |
| DISPEX® Ultra PX 4585 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low...展开 DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4585 is especially suited for the dispersion of pigments in water-based coatings. DISPEX® Ultra PX 4585 offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes DISPEX® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC). 收起 | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| Dorkafill® H | BassTech International | Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) ...展开 Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) without a loss of quality. 收起 | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...展开 Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). 收起 | |
| Efka® 3650 N | BASF Formulation Additives 巴斯夫配方助剂 | Efka® 3650 N可降低有机涂料体系的表面张力。其良好的相容性使之可有效防缩孔并提供流平控制。它的物理状态为浅黄色液体。Efka® 3650 N尤其适合用于基于醇酸的烤瓷漆、丙烯酸或聚酯树脂、聚氨酯涂料，双组份环氧涂料和自干醇酸体系 | |
| EFKA® FA 4600 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...展开 EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. 收起 | |
| EFKA® FA 4601 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regardi...展开 EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regarding interfacial activity. The mode of action of EFKA® FA 4601 systems results from the high surface activity of its constituents with almost all pigments. If processed properly, the individual pigment particles are coated with a monomolecular layer of adsorbed compounds which prevent agglomeration into larger particles, with the result that the fine particles remain in suspension and no caking occurs. This viscous liquid is a blend of selected fatty alcohol sulfates. EFKA® FA 4601 does not contain any alkali ions, and it is effective in most paints, provided they are not distinctly polar in their composition. 收起 | |
| Efka® FA 4610 | BASF Formulation Additives 巴斯夫配方助剂 | 阴离子型分散剂，特为钛白粉分散开发，也可用于其他的填料和无机颜料中，适用于汽车漆，工业漆，卷钢涂料和酸固化 | |
| Efka® FA 4612 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4612 (以前的 Efka® 5210)可帮助润湿和分散填料（CaCO3和AI (OH) 3），含不饱和聚酯树脂或结合聚苯乙烯，聚醋酸乙烯和苯乙烯-丁二烯共聚物。它可使填料易于添加，减少分散时间。它也可降低和稳定浆体粘度，从而改善流平，增加填料含量，并提高防火性能。Efka® FA 4612设计用于含填料的SMC和BMC共混物。它也适合用于含填料的胶衣涂料 | |
| Efka® FA 4615 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4615 (以前的Efka® 5215是一种有效地润湿和分散助剂，适用于无机填料。它可改善润湿性，使填料易于添加，降低浆体/混合物的粘度，增加填料含量。Efka® FA 4615适用于含填料的不饱和聚酯体系（SMC、BMC共混物、胶衣涂料和腻子）或结合聚苯乙烯、聚醋酸乙烯和苯乙烯-丁二烯共聚物。 |
