UL Prospector

成功!

成功保存搜索结果
Alcohol Soluble Maleic Resin WMR110 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Alcohol Soluble Maleic Resin WMR130 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Alcohol Soluble Maleic Resin WMR150 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
C5-F(A123) Zhejiang Henghe Petrochemical Co., Ltd. C5-F(A123) is a transparent, straw yellow solid grain. This product is a petroleum resin that is used in adhesives, reinforcing agents, and fillers.
C9-L Zhejiang Henghe Petrochemical Co., Ltd. C9-L is a light petroleum resin. It is generally used with other resins as promoters, adjusting agents, and modifiers. It can be used to make paints, rubbers, adhesives, and printing inks.
Disproportionated Rosin 1st Grade Resin Chemicals Co., Ltd. Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起
Disproportionated Rosin Extra Grade Resin Chemicals Co., Ltd. Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起
GH-AS-C2 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibil...展开 GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-AS-C2-F SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high ...展开 GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-AS-C2-Q SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with ...展开 GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-AS-D SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-AS-D, in the form of a clear sticky solution, is a polyurethane modified acrylic resin. It is applicable to the production of alcohol and water-soluble gravure printing ink for extrusion lamination with environmental protection.
GH-AS-SY-X SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-AS-W SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibilit...展开 GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-AS-W-Q SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, wi...展开 GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-AS-W2A SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-ASJ SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibil...展开 GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-ASJ-2 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability,...展开 GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-ASJB-4 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product h...展开 GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has low viscosity (700 to 1200 mPas), no dispersing agent needed, and good print-ability. 收起
GH-ASJB-4Y SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product ...展开 GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起
GH-ASJB-4Y-2 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This produc...展开 GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起
GH-ASJG-A SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitabl...展开 GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起
GH-ASJG-B SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitab...展开 GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起
GH-FF SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-FF, in the form of a clear solution, is a kind of green environmental protection, anti-corrosion coatings resin. It has good anti-corrosive performance and can be widely applied to anti-corrosion coating, in the metal.
GH-OH-1015 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起
GH-OH-1503 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起
GH-OH-2607 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起
GH-OH-3005 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起
GH-OH-4007 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起
GH-PU-1 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-PU-2 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-PU-3 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起
GH-TCJ-1 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-TCJ-1, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 600 to 1200 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and cont...展开 GH-TCJ-1, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 600 to 1200 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and containers. 收起
GH-TCJ-2 SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-TCJ-2, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 400 to 1000 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and cont...展开 GH-TCJ-2, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 400 to 1000 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and containers. 收起
GH-WPU SICHUAN GUOHE NEW MATERIALS CO., LTD. GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing g...展开 GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing glue. 收起
Gum Rosin K Resin Chemicals Co., Ltd. Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin M Resin Chemicals Co., Ltd. Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin N Resin Chemicals Co., Ltd. Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin WG Resin Chemicals Co., Ltd. Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin WW Resin Chemicals Co., Ltd. Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin X Resin Chemicals Co., Ltd. Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
HESS NCS-10 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-12 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-15 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-3 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-5 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-8 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HH-2100 Zhejiang Henghe Petrochemical Co., Ltd. HH-2100 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2110 Zhejiang Henghe Petrochemical Co., Ltd. HH-2210 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2120 Zhejiang Henghe Petrochemical Co., Ltd. HH-2120 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2130 Zhejiang Henghe Petrochemical Co., Ltd. HH-2130 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2203 Zhejiang Henghe Petrochemical Co., Ltd. HH-2203 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
Heavy Turpentine Oil Resin Chemicals Co., Ltd. Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起
Hydrocarbon DCPD Resin HSU100 Resin Chemicals Co., Ltd. Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起
Hydrocarbon Resin C5 HPE100A Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrocarbon Resin C5 HPE100A-L Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrocarbon Resin C5 HPE100R Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起
Hydrocarbon Resin C5 HPE100R-S Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起
Hydrocarbon Resin C9 HPE100P Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE100P-D Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120P Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120P-D Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120PL Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrogenated Hydrocarbon Resin C5 HPE100H Resin Chemicals Co., Ltd. Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrogenated Hydrocarbon Resin C9 HFM-100 Resin Chemicals Co., Ltd. Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起
Hydrogenated Rosin Ester Resin Chemicals Co., Ltd. Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起
Hydrogenated Rosin-A Resin Chemicals Co., Ltd. Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-B Resin Chemicals Co., Ltd. Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-C Resin Chemicals Co., Ltd. Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-D Resin Chemicals Co., Ltd. Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Liquid Rosin Ester LRE-1 Resin Chemicals Co., Ltd. Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue.
PR-100 Zhejiang Henghe Petrochemical Co., Ltd. PR-100 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-110 Zhejiang Henghe Petrochemical Co., Ltd. PR-110 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-50 Zhejiang Henghe Petrochemical Co., Ltd. PR-50 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-60 Zhejiang Henghe Petrochemical Co., Ltd. PR-60 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-80 Zhejiang Henghe Petrochemical Co., Ltd. PR-80 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-90 Zhejiang Henghe Petrochemical Co., Ltd. PR-90 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
Polymerized Rosin Resin Chemicals Co., Ltd. Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起
Refined Gum Rosin Resin Chemicals Co., Ltd. Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Refined Rosin Modified Resin GE-85L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin GE-90L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-100L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-105L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-95L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Rosin Modified Maleic Resin MR-130 Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起
Rosin Modified Maleic Resin MR-130D Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起
Rosin Modified Maleic Resin MR115R Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起
Rosin Modified Maleic Resin MR120R Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起
Rosin Modified Maleic Resin MR125R Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起
Rosin Modified Phenolic Resin PI116 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI118 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI136 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI138 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI142 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI145 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI146 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI147 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI148 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI149 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI152 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI155 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起