| Acry-25 | Macro Polymers Pvt. Ltd. | Acry-25 is an acrylic-modified, soya fatty acid, pentaerythritol base alkyd resin. This product has high gloss and high build in air-drying industrial finishes. Acry-25 features excellent outdoor, water, oil and weather resistance. It can be used in pa...展开 Acry-25 is an acrylic-modified, soya fatty acid, pentaerythritol base alkyd resin. This product has high gloss and high build in air-drying industrial finishes. Acry-25 features excellent outdoor, water, oil and weather resistance. It can be used in pale-coloured varnishes for industrial uses. 收起 | |
| Acry-300 | Macro Polymers Pvt. Ltd. | Acry-300 is a modified acrylic alkyd resin. This product has very high gloss, and excellent weather, water and oil resistant properties. It can be used in pale coloured varnishes for industrial uses, in clear coat wood finishes, and in auto refinishing. | |
| Acry-302 | Macro Polymers Pvt. Ltd. | Acry-302 is a specialty alkyd resin. This product has very high gloss, and rapid drying properties. It provides weather resistance with good water and oil resistance characteristics. It can be used in pale-coloured industrial varnishes. | |
| Acry-35 | Macro Polymers Pvt. Ltd. | Acry-35 is an acrylic-modified alkyd resin. This product has very high gloss, and excellent weather, water and oil-resistant properties. It can be used in pale-coloured varnishes for industrial uses. | |
| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| C-1025 | Macro Polymers Pvt. Ltd. | C-1025 is a short oil, glycerol-esterified alkyd resin that has been modified with saturated fatty acids. This product shows high gloss, good hardness and flexibility in stoving enamels. If used in nitrocellulose lacquers, it has very good yellowing res...展开 C-1025 is a short oil, glycerol-esterified alkyd resin that has been modified with saturated fatty acids. This product shows high gloss, good hardness and flexibility in stoving enamels. If used in nitrocellulose lacquers, it has very good yellowing resistance, flexibility and durability. It can be used in white baking enamels and in wood coatings. 收起 | |
| C-1030 | Macro Polymers Pvt. Ltd. | C-1030 is a short oil glycerol esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, flexibility and yellowing resistance in stoving enamels. It can be used in stoving enamels for aut...展开 C-1030 is a short oil glycerol esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, flexibility and yellowing resistance in stoving enamels. It can be used in stoving enamels for automotive and kitchen appliance applications. It can also be used in clear and pigmented nitrocellulose lacquer for furniture and automotives. 收起 | |
| C-1031 | Macro Polymers Pvt. Ltd. | C-1031 is a short oil glycerol-esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, yellowing resistance, and flexibility in stoving enamels. It can be used in white baking enamels a...展开 C-1031 is a short oil glycerol-esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, yellowing resistance, and flexibility in stoving enamels. It can be used in white baking enamels and wood coatings. 收起 | |
| C-1032 | Macro Polymers Pvt. Ltd. | C-1032 is a non-drying alkyd resin based on trimethylol propane and isophthalic acid. This product has very high temperature resistance, up to 200 degrees Celsius. It can be used in high temperature industrial finishes and insulation. | |
| C-1032 | Macro Polymers Pvt. Ltd. | C-1032 is a short-oil glycerol-esterified resin, that has been modified with coconut oil. This product provides good hardness, high gloss, yellowing resistance and flexibility in stoving enamels. It can be used in stoving enamels for automotive and kitc...展开 C-1032 is a short-oil glycerol-esterified resin, that has been modified with coconut oil. This product provides good hardness, high gloss, yellowing resistance and flexibility in stoving enamels. It can be used in stoving enamels for automotive and kitchen appliance applications. 收起 | |
| CA-3045 | Macro Polymers Pvt. Ltd. | CA-3045 is a medium oil, penta-esterified alkyd resin that has been modified with castor oil. This product has good compatibility with nitrocellulose lacquers. It can be used in nitrocellulose polishing lacquers for furniture, nitrocellulose base puttie...展开 CA-3045 is a medium oil, penta-esterified alkyd resin that has been modified with castor oil. This product has good compatibility with nitrocellulose lacquers. It can be used in nitrocellulose polishing lacquers for furniture, nitrocellulose base putties, and leather polishes. 收起 | |
| CR-250 | Macro Polymers Pvt. Ltd. | CR-250 is an unmodified liquid epoxy resin that is based on Bisphenol A and epichlorohydrine. This product is soluble in alcohols, esters, ketones, glycol ethers, and aromatic hydrocarbons. It can be used in castings, encapsulations, flooring, potting, ...展开 CR-250 is an unmodified liquid epoxy resin that is based on Bisphenol A and epichlorohydrine. This product is soluble in alcohols, esters, ketones, glycol ethers, and aromatic hydrocarbons. It can be used in castings, encapsulations, flooring, potting, adhesives, laminating, reinforced plastics, filament winding, coatings, and electrotechnical applications. 收起 | |
| D-2040M | Macro Polymers Pvt. Ltd. | D-2040M is a short oil, glycerol-esterified alkyd resin that has been modified with monomeric dehydrated castor oil. This product has rapid curing and good yellowing resistance in stoving enamels. It also has excellent flexibility, with good impact resi...展开 D-2040M is a short oil, glycerol-esterified alkyd resin that has been modified with monomeric dehydrated castor oil. This product has rapid curing and good yellowing resistance in stoving enamels. It also has excellent flexibility, with good impact resistance and adhesion on steel. It can be used as a stoving primer. 收起 | |
| D-2040MHV | Macro Polymers Pvt. Ltd. | D-2040MHV is a short-oil, glycerol-esterified alkyd resin that has been modified with dehydrated castor oil. This product provides good yellowing resistance, high gloss and good durability with rapid curing in stoving enamels. It can be used in stoving ...展开 D-2040MHV is a short-oil, glycerol-esterified alkyd resin that has been modified with dehydrated castor oil. This product provides good yellowing resistance, high gloss and good durability with rapid curing in stoving enamels. It can be used in stoving enamels for automotive and bicycle applications. It can also be used in stoving primers and acid hardening varnishes. 收起 | |
| D-2050 | Macro Polymers Pvt. Ltd. | D-2050 is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with dehydrated castor oil. This product has good brushability and durability. It can be used in decorative pastel enamels for interior and exterior use. | |
| D-2050R | Macro Polymers Pvt. Ltd. | D-2050R is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with dehydrated castor oil and rosin. This product has good brushability, good durability, and high initial gloss. It can be used in decorative pastel enamels for int...展开 D-2050R is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with dehydrated castor oil and rosin. This product has good brushability, good durability, and high initial gloss. It can be used in decorative pastel enamels for interior and exterior use. 收起 | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| Epoxy-450 | Macro Polymers Pvt. Ltd. | Epoxy-450 is an epoxy resin in a 75% xylene solution. This product shows good hardness and adhesion to a variety of substrates. It can be used in two-pack cold-curing industrial, maintenance and marine coatings. If it is used with various polyamine har...展开 Epoxy-450 is an epoxy resin in a 75% xylene solution. This product shows good hardness and adhesion to a variety of substrates. It can be used in two-pack cold-curing industrial, maintenance and marine coatings. If it is used with various polyamine hardeners, it can impart good corrosion and chemical resistance. 收起 | |
| F-4035 | Macro Polymers Pvt. Ltd. | F-4035 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product has excellent yellowing resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows hig...展开 F-4035 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product has excellent yellowing resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows high gloss and good gloss retention. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators and kitchen equipment, two-component polyurethane lacquers, and automotive paints for refinishing. 收起 | |
| F-4035 55% HV | Macro Polymers Pvt. Ltd. | F-4035 55% HV is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows high...展开 F-4035 55% HV is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows high gloss and high gloss retention, excellent hardness and flexibility. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators, kitchen equipment, two-component polyurethane lacquers, and automotive paints for refinishing applications. 收起 | |
| F-4038 | Macro Polymers Pvt. Ltd. | F-4038 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures, When used in stoving enamels, it has very high gloss and ...展开 F-4038 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures, When used in stoving enamels, it has very high gloss and good gloss retention, excellent hardness and flexibility. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators, kitchen equipment, two component polyurethane lacquers, and and automotive paints in refinishing applications. 收起 | |
| F-4043 | Macro Polymers Pvt. Ltd. | F-4043 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to yellowing in light and heat, even at high temperatures. If used in stoving enamels, it shows very h...展开 F-4043 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to yellowing in light and heat, even at high temperatures. If used in stoving enamels, it shows very high gloss and good gloss retention, excellent hardness and flexibility. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators and kitchen equipment, two-component polyurethane lacquers, and automotive paints for refinishing applications. 收起 | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| H-101 | Macro Polymers Pvt. Ltd. | H-101 is an aliphatic polyamide resin. This product should be used in an aliphatic epoxy adduct as a hardener, in order to induce chemical-resistant protection for coatings with or without coal tar modification. It can be used in coatings. | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100R | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C5 HPE100R-S | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| KF-10 | Macro Polymers Pvt. Ltd. | KF-10 is a ketone formaldehyde resin. This product has compatibility with drying and non-drying short oil alkyds that have been dissolved in aromatic solvents. It shows high gloss and excellent build in air-drying nitrocellulose industrial finishes. If...展开 KF-10 is a ketone formaldehyde resin. This product has compatibility with drying and non-drying short oil alkyds that have been dissolved in aromatic solvents. It shows high gloss and excellent build in air-drying nitrocellulose industrial finishes. If it is used with non-reactive polyamides, it gives good gloss in flexo inks. KF-10 can be used in nitrocellulose paints, adhesives, printing inks, ballpoint pen ink pastes, wood varnishes, metal and paper. 收起 | |
| L-602054 | Macro Polymers Pvt. Ltd. | L-602054 is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil and phenols. This product has good brushability, good drying, durability and very good gloss. It can be used in decorative, fast-drying enamels for ...展开 L-602054 is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil and phenols. This product has good brushability, good drying, durability and very good gloss. It can be used in decorative, fast-drying enamels for interior and exterior uses. It can also be used in primers for automotive undercoats. 收起 | |
| L-6050 | Macro Polymers Pvt. Ltd. | L-6050 is a medium oil, pentaerythritol-esterified alkyd resin modified with linseed oil. This product has high viscosity and good hardness after short drying times, and a limited compatibility with basic pigments. It can be used in low-end paints, spra...展开 L-6050 is a medium oil, pentaerythritol-esterified alkyd resin modified with linseed oil. This product has high viscosity and good hardness after short drying times, and a limited compatibility with basic pigments. It can be used in low-end paints, spraying enamels for trucks and buses, and stoving enamels for steel furniture. 收起 | |
| L-6050R | Macro Polymers Pvt. Ltd. | L-6050R is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil and rosin. This product has good brushability and durability with good initial gloss. It can be used in decorative pastel enamels for interior and ex...展开 L-6050R is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil and rosin. This product has good brushability and durability with good initial gloss. It can be used in decorative pastel enamels for interior and exterior use. 收起 | |
| L-6060 | Macro Polymers Pvt. Ltd. | L-6060 is a long oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil. This product has very good drying rates and a thorough hardness, with excellent durability, surface hardness and gloss retention. It can be used in dec...展开 L-6060 is a long oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil. This product has very good drying rates and a thorough hardness, with excellent durability, surface hardness and gloss retention. It can be used in decorative paints in deep colour shades, undercoats, and primers. 收起 | |
| L-6060 100% | Macro Polymers Pvt. Ltd. | L-6060 100% is a long-oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil. This product shows very good drying and thorough hardening, with excellent durability in all climates, surface hardness, gloss and gloss retention....展开 L-6060 100% is a long-oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil. This product shows very good drying and thorough hardening, with excellent durability in all climates, surface hardness, gloss and gloss retention. It can be used in decorative enamels, undercoats and primers. 收起 | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| MF-268 | Macro Polymers Pvt. Ltd. | MF-268 is a butylated melamine formaldehyde resin. This product has excellent reactivity and color retention. It can be used in stoving finishes for automotive and kitchen appliances, and strip and roller coating enamels. | |
| MF-910 | Macro Polymers Pvt. Ltd. | MF-910 is a butylated melamine formaldehyde resin. This product has medium reactivity and good color retention on stoving. It can be used in stoving finishes for automotive and kitchen appliance applications, and in strip and roller coating enamels. | |
| MF-970 | Macro Polymers Pvt. Ltd. | MF-970 is a butylated melamine formaldehyde resin. This product has good flexibility and colour retention. It can be used in stoving finishes for automotive and kitchen appliances. | |
| MFAP | Macro Polymers Pvt. Ltd. | MFAP is a specialty alkyd resin. This product has compatibilty with drying oils and long oil alkyds, with very low acid values. It can be used as a medium for single-pack aluminum paints. This paste will not turn black for three months. | |
| MFHF | Macro Polymers Pvt. Ltd. | MFHF is a specialty alkyd resin. This product is compatible with drying oils and long-oil alkyds. It can be used as a medium for hammertone finishes and coatings. | |
| MR-Gly | Macro Polymers Pvt. Ltd. | MR-Gly is a rosin-modified maleic glycerin ester resin. This product is compatible with nitrocellulose, drying and non-drying alkyd that have been dissolved in aromatic solvents. It has very high gloss and is a rapid-drying resin. MR-Gly can be used in...展开 MR-Gly is a rosin-modified maleic glycerin ester resin. This product is compatible with nitrocellulose, drying and non-drying alkyd that have been dissolved in aromatic solvents. It has very high gloss and is a rapid-drying resin. MR-Gly can be used in pale-coloured industrial varnishes and in nitrocellulose base formulations. 收起 | |
| MR-Penta | Macro Polymers Pvt. Ltd. | MR-Penta is a rosin-modified maleic glycerin ester resin. This product is compatible with nitrocellulose, drying and non-drying alkyds that have been dissolved in aromatic solvents. It shows very high loss and is a rapid-drying resin. MR-Penta can be u...展开 MR-Penta is a rosin-modified maleic glycerin ester resin. This product is compatible with nitrocellulose, drying and non-drying alkyds that have been dissolved in aromatic solvents. It shows very high loss and is a rapid-drying resin. MR-Penta can be used in pale-coloured industrial varnishes and in nitrocellulose base formulations. 收起 | |
| P-10 | Macro Polymers Pvt. Ltd. | P-10 is an unsaturated polyester resin. This product gives a hard, glass-like film when cured. It is used as a lamination for wood coatings in three-pack systems, and has very good exterior and stain resistance. | |
| P-11 | Macro Polymers Pvt. Ltd. | P-11 is a linear oil free polyester resin. This product is compatible with a wide range of melamines, and is typically used with either hexamethoxymethyl melamines or partially methylated melamines. It can be used in coil coatings, sheet-fed metal decor...展开 P-11 is a linear oil free polyester resin. This product is compatible with a wide range of melamines, and is typically used with either hexamethoxymethyl melamines or partially methylated melamines. It can be used in coil coatings, sheet-fed metal decoration or general industrial applications. 收起 | |
| P-12 | Macro Polymers Pvt. Ltd. | P-12 is a linear oil free polyester resin. This product is compatible with a wide range of melamines, and is typically used with hexamethoxymethyl melamines or partially methylated melamines. It can be used in coil coatings, sheet-fed metal decorating o...展开 P-12 is a linear oil free polyester resin. This product is compatible with a wide range of melamines, and is typically used with hexamethoxymethyl melamines or partially methylated melamines. It can be used in coil coatings, sheet-fed metal decorating or general industrial applications. 收起 | |
| PO-3670 | Macro Polymers Pvt. Ltd. | PO-3670 is a glycerol-esterified alkyd resin that has been modified with saturated fatty acids. When it is used in stoving enamels, this product shows high gloss, good hardness, flexibility and very good yellowing-resistance. When it is used in nitrocel...展开 PO-3670 is a glycerol-esterified alkyd resin that has been modified with saturated fatty acids. When it is used in stoving enamels, this product shows high gloss, good hardness, flexibility and very good yellowing-resistance. When it is used in nitrocellulose lacquers, it has an excellent combination of hardness, flexibility and durability. It can be used in low-cost paints, stoving enamels for automotives and kitchen appliances, and clear or pigmented nitrocellulose lacquers for furniture and automotives. 收起 | |
| Polyester IPA-NPG | Macro Polymers Pvt. Ltd. | Polyester IPA-NPG is a specialty alkyd resin based on isophthalic acid and neo-pantene glycol. This product has good gloss retention, excellent yellowing resistance, and good durability. It can be used in stoving coil coatings, two-pack polyurethane pai...展开 Polyester IPA-NPG is a specialty alkyd resin based on isophthalic acid and neo-pantene glycol. This product has good gloss retention, excellent yellowing resistance, and good durability. It can be used in stoving coil coatings, two-pack polyurethane paints and coatings, and wood finishes. 收起 | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| Polyol-280 | Macro Polymers Pvt. Ltd. | Polyol-280 is a specialty alkyd resin. This product is a polyester polyol based on pentaerythritol and anhydrous phthalic acid. It is compatible with drying oils, drying and non-drying alkyds, and aliphatic/aromatic isocyanates. Polyol-280 can be used ...展开 Polyol-280 is a specialty alkyd resin. This product is a polyester polyol based on pentaerythritol and anhydrous phthalic acid. It is compatible with drying oils, drying and non-drying alkyds, and aliphatic/aromatic isocyanates. Polyol-280 can be used as a polyol in polyurethane finishes. 收起 | |
| Polyol-32 | Macro Polymers Pvt. Ltd. | Polyol-32 is a specialty alkyd resin based on glycerine and anhydrous phthalic acid. This product has compatibility with drying oils, nitrocellulose, drying and non-drying alkyds, and aliphatic/aromatic isocyanates. It can be used as a polyol in polyure...展开 Polyol-32 is a specialty alkyd resin based on glycerine and anhydrous phthalic acid. This product has compatibility with drying oils, nitrocellulose, drying and non-drying alkyds, and aliphatic/aromatic isocyanates. It can be used as a polyol in polyurethane finishes. 收起 | |
| PUD-53 | Macro Polymers Pvt. Ltd. | PUD-53 is a polyester resin. This product appears as an opaque but translucent substrate. It can be used in coatings and adhesives for wood and metal. PUD-53 wets well on low-surface energy substrates, with excellent outdoor and UV durability. It has ...展开 PUD-53 is a polyester resin. This product appears as an opaque but translucent substrate. It can be used in coatings and adhesives for wood and metal. PUD-53 wets well on low-surface energy substrates, with excellent outdoor and UV durability. It has high chemical and hydrolysis-resistance. 收起 | |
| PUD-54 | Macro Polymers Pvt. Ltd. | PUD-54 is a polycarbonate resin. This product appears as an opaque but translucent substrate. It can be used in coatings and adhesives for wood. PUD-54 shows good wetting on low surface-energy substrates, with excellent outdoor and UV durability. It h...展开 PUD-54 is a polycarbonate resin. This product appears as an opaque but translucent substrate. It can be used in coatings and adhesives for wood. PUD-54 shows good wetting on low surface-energy substrates, with excellent outdoor and UV durability. It has good chemical- and hydrolysis-resistance. 收起 | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI142 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI145 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI146 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI147 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI148 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI149 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI152 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI155 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI160 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Resin GE85 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin GE90 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE 105 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 |
