UL Prospector

成功!

成功保存搜索结果
Alcohol Soluble Maleic Resin WMR110 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Alcohol Soluble Maleic Resin WMR130 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Alcohol Soluble Maleic Resin WMR150 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
C5-F(A123) Zhejiang Henghe Petrochemical Co., Ltd. C5-F(A123) is a transparent, straw yellow solid grain. This product is a petroleum resin that is used in adhesives, reinforcing agents, and fillers.
C9-L Zhejiang Henghe Petrochemical Co., Ltd. C9-L is a light petroleum resin. It is generally used with other resins as promoters, adjusting agents, and modifiers. It can be used to make paints, rubbers, adhesives, and printing inks.
Disproportionated Rosin 1st Grade Resin Chemicals Co., Ltd. Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起
Disproportionated Rosin Extra Grade Resin Chemicals Co., Ltd. Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起
Gum Rosin K Resin Chemicals Co., Ltd. Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin M Resin Chemicals Co., Ltd. Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin N Resin Chemicals Co., Ltd. Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin WG Resin Chemicals Co., Ltd. Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin WW Resin Chemicals Co., Ltd. Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin X Resin Chemicals Co., Ltd. Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
HESS NCS-10 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-12 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-15 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-3 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-5 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-8 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HH-2100 Zhejiang Henghe Petrochemical Co., Ltd. HH-2100 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2110 Zhejiang Henghe Petrochemical Co., Ltd. HH-2210 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2120 Zhejiang Henghe Petrochemical Co., Ltd. HH-2120 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2130 Zhejiang Henghe Petrochemical Co., Ltd. HH-2130 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2203 Zhejiang Henghe Petrochemical Co., Ltd. HH-2203 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
Heavy Turpentine Oil Resin Chemicals Co., Ltd. Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起
Hydrocarbon DCPD Resin HSU100 Resin Chemicals Co., Ltd. Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起
Hydrocarbon Resin C5 HPE100A Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrocarbon Resin C5 HPE100A-L Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrocarbon Resin C5 HPE100R Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起
Hydrocarbon Resin C5 HPE100R-S Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起
Hydrocarbon Resin C9 HPE100P Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE100P-D Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120P Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120P-D Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120PL Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrogenated Hydrocarbon Resin C5 HPE100H Resin Chemicals Co., Ltd. Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrogenated Hydrocarbon Resin C9 HFM-100 Resin Chemicals Co., Ltd. Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起
Hydrogenated Rosin Ester Resin Chemicals Co., Ltd. Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起
Hydrogenated Rosin-A Resin Chemicals Co., Ltd. Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-B Resin Chemicals Co., Ltd. Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-C Resin Chemicals Co., Ltd. Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-D Resin Chemicals Co., Ltd. Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Liquid Rosin Ester LRE-1 Resin Chemicals Co., Ltd. Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue.
PR-100 Zhejiang Henghe Petrochemical Co., Ltd. PR-100 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-110 Zhejiang Henghe Petrochemical Co., Ltd. PR-110 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-50 Zhejiang Henghe Petrochemical Co., Ltd. PR-50 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-60 Zhejiang Henghe Petrochemical Co., Ltd. PR-60 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-80 Zhejiang Henghe Petrochemical Co., Ltd. PR-80 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-90 Zhejiang Henghe Petrochemical Co., Ltd. PR-90 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
Picassian® AC-049 Stahl Polymers Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss p...展开 Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss properties, high UV resistance properties, and good outdoor durability. 收起
Picassian® AC-111 Stahl Polymers Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance ...展开 Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance properties, and low water absorption properties. 收起
Picassian® AC-122 Stahl Polymers Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties...展开 Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties, good scratch resistance, good clarity properties, good gloss properties, and is quick and easy to sand. 收起
Picassian® AC-126 Stahl Polymers Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glo...展开 Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glossy, hard, and transparent films once coalesced. This product has good water resistance, humidity resistance, adhesion, corrosion resistance, blister resistance, and mechanical properties. It also has good compatibility with other binders such as acrylics and polyurethanes. 收起
Picassian® AC-169 Stahl Polymers Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance ...展开 Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance properties, good clarity properties, and is quick and easy to sand. 收起
Picassian® AC-176 Stahl Polymers Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...展开 Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. 收起
Picassian® AC-177 Stahl Polymers Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...展开 Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. 收起
Picassian® AC-191 Stahl Polymers Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resi...展开 Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resistance properties, good alcohol resistance, has good hand cream resistance, is stable with treated aluminium flakes, and provides clear, very hard, and glossy films. 收起
Picassian® AC-192 Stahl Polymers Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good sc...展开 Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good scratch resistance properties, has good transparency properties, is easy to sand, is quick to sand, and is crosslinkable with isocyanates. 收起
Picassian® AC-213 Stahl Polymers Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...展开 Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. 收起
Picassian® AC-222 Stahl Polymers Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This pro...展开 Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This product has good pigment wetting attributes, high pigment loading capacity attributes, is quick to sand, and is quick to dry. 收起
Picassian® AC-246 Stahl Polymers Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good g...展开 Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good grease resistance properties, good alcohol compatibility, and good pigment compatibility. 收起
Picassian® AC-280 Stahl Polymers Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistan...展开 Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistance properties, good humidity resistance properties, good adhesion properties on many types of substrates, and good mechanical properties. 收起
Picassian® AC-295 Stahl Polymers Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plasti...展开 Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plastic substrates, is widely compatible with many types of binders, has good clarity properties, has good gloss properties, has good chemical resistance properties, and has fast hardness development properties. 收起
Picassian® PU-508 Stahl Polymers Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility ...展开 Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility properties, has good heat seal resistance properties, and has good adhesion on aluminium foil. 收起
Picassian® PU-518 Stahl Polymers Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on alum...展开 Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on aluminium foil, is soluble in alcohol rich mixtures, and is fully compatible with alcohol soluble nitrocellulose. 收起
Picassian® PU-546 Stahl Polymers Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol ri...展开 Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol rich mixtures, and has solvent retention values that are lower than those of conventional inks. 收起
Picassian® PU-548 Stahl Polymers Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble res...展开 Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble resins, and is very resistant to oils, water, and fats. 收起
Picassian® PU-551 Stahl Polymers Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing pr...展开 Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing properties, good wetting properties, good flow properties, good flexibility properties, and good blocking resistance properties. 收起
Picassian® PU-559 Stahl Polymers Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides g...展开 Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides good adhesion properties when used on polyolefin flims, has good compatibility with many kinds of resins, has good resistance properties with water, and many types of fat and oil. 收起
Picassian® PU-635 Stahl Polymers Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility prop...展开 Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility properties, is crosslinkable at room temperature, and is highly compatible with other binders. 收起
Picassian® PU-648 Stahl Polymers Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good co...展开 Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good coverage properties, good filling properties, and maintains flexibility at negative 30 degrees Celsius. 收起
Picassian® XL-701 Stahl Polymers Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. Th...展开 Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. This product is a yellow, slightly hazy liquid with a solid content of 50 percent. 收起
Picassian® XL-702 Stahl Polymers Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formula...展开 Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formulated at a pH greater than 8 to achieve a long pot life. 收起
Picassian® XL-725 Stahl Polymers Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and ma...展开 Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. 收起
Picassian® XL-732 Stahl Polymers Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good ad...展开 Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. 收起
Polymerized Rosin Resin Chemicals Co., Ltd. Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起
Refined Gum Rosin Resin Chemicals Co., Ltd. Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Refined Rosin Modified Resin GE-85L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin GE-90L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-100L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-105L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-95L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Relca® HY-460 Stahl Polymers Relca® HY-460 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in decorative applications, interior DTM applications, exterior DTM applications, interior wood coatings, and exterior wood coating applications. This produ...展开 Relca® HY-460 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in decorative applications, interior DTM applications, exterior DTM applications, interior wood coatings, and exterior wood coating applications. This product has fast drying properties, good adhesion properties, good shear stability properties, good pigment wetting properties, and is solvent free. 收起
Relca® HY-625 Stahl Polymers Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resi...展开 Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resistance properties, good hydrolysis resistance properties, high hardness properties, and good adhesion properties with wood. 收起
Relca® PU-406 Stahl Polymers Relca® PU-406 is an aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in leather and textile finishes, and soft touch coatings. This product is NMP free, has good alcohol resistance properties, good water resistance properties,...展开 Relca® PU-406 is an aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in leather and textile finishes, and soft touch coatings. This product is NMP free, has good alcohol resistance properties, good water resistance properties, good chemical resistance properties, good UV resistance properties, good heat resistance properties, and good adhesion properties. 收起
Relca® PU-415 Stahl Polymers Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has go...展开 Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has good water resistance properties and good compatibility properties with other binders. 收起
Relca® PU-476 Stahl Polymers Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, go...展开 Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, good adhesion properties, good chemical resistance properties, good pigment wetting properties, good scratch resistance properties, and good black heel mar resistance properties. 收起
Relca® PU-477 Stahl Polymers Relca® PU-477 is a low solvent, aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in soft touch coatings, high quality leather finishes, and high quality textile finishes. This product is NMP free, NEP free, has good water resi...展开 Relca® PU-477 is a low solvent, aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in soft touch coatings, high quality leather finishes, and high quality textile finishes. This product is NMP free, NEP free, has good water resistance properties, good chemical resistance properties, good UV resistance properties, good hydrolysis resistance properties, and good adhesion properties with PVC, PUR, and pretreated TPO. 收起
Relca® PU-655 Stahl Polymers Relca PU-655 is an aqueous, anionic dispersion of an aliphatic polycarbonate urethane. It is used in parquet flooring, wood coatings, and metal pre-treatment. This product is solvent free, has good water resistance properties, good chemical resistance pro...展开 Relca PU-655 is an aqueous, anionic dispersion of an aliphatic polycarbonate urethane. It is used in parquet flooring, wood coatings, and metal pre-treatment. This product is solvent free, has good water resistance properties, good chemical resistance properties, good hydrolysis resistance properties, and good adhesion properties with metal and wood. 收起
Relca® PU-968 Stahl Polymers Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion p...展开 Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion properties, and is crosslinkable at room temperature with polycarbodiimides. 收起
Relca® UV-628 Stahl Polymers Relca® UV-628 is a waterbased UV curable polyurethane. It is solvent free, has good hard resistance properties, good abrasion resistance properties, good stain resistance properties, good chemical resistance properties, good gloss coating properties, good...展开 Relca® UV-628 is a waterbased UV curable polyurethane. It is solvent free, has good hard resistance properties, good abrasion resistance properties, good stain resistance properties, good chemical resistance properties, good gloss coating properties, good scratch resistance properties, and is tack free before UV curing. This product is used in applications that need to be dried prior to EB/UV curing, and requires the addition of a photoinitiator to ensure proper curing. 收起
Rosin Modified Maleic Resin MR-130 Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起
Rosin Modified Maleic Resin MR-130D Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起
Rosin Modified Maleic Resin MR115R Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起
Rosin Modified Maleic Resin MR120R Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起
Rosin Modified Maleic Resin MR125R Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起
Rosin Modified Phenolic Resin PI116 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI118 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI136 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI138 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起