UL Prospector

成功!

成功保存搜索结果
Alcohol Soluble Maleic Resin WMR110 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Alcohol Soluble Maleic Resin WMR130 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Alcohol Soluble Maleic Resin WMR150 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
C5-F(A123) Zhejiang Henghe Petrochemical Co., Ltd. C5-F(A123) is a transparent, straw yellow solid grain. This product is a petroleum resin that is used in adhesives, reinforcing agents, and fillers.
C9-L Zhejiang Henghe Petrochemical Co., Ltd. C9-L is a light petroleum resin. It is generally used with other resins as promoters, adjusting agents, and modifiers. It can be used to make paints, rubbers, adhesives, and printing inks.
Deco-Coat DC-2501R Epoxies, Etc. Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costu...展开 Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costume and fashion jewelry, decals, labels, pins, emblems, and wooden floors and tables. 收起
Deco-Coat DC-2510 Epoxies, Etc. Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelera...展开 Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelerated with mild heat and contains a proprietary air release additive which allows for an air bubble free high gloss dome coating. 收起
Deco-Coat DC-2550 Epoxies, Etc. Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this prod...展开 Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this product is ideal for use in applications such as labels, plaques, emblems, badges, key & luggage tags, and wood trim kits. 收起
Disproportionated Rosin 1st Grade Resin Chemicals Co., Ltd. Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起
Disproportionated Rosin Extra Grade Resin Chemicals Co., Ltd. Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起
Epoxies® 20-1615 Epoxies, Etc. Epoxies® 20-1615 is a clear, orderless, two part silicone rubber compound that is low in viscosity and cures in room temperature. Primarily used for potting electronic assemblies that require shock and vibration resistance, it can also protect assemblies ...展开 Epoxies® 20-1615 is a clear, orderless, two part silicone rubber compound that is low in viscosity and cures in room temperature. Primarily used for potting electronic assemblies that require shock and vibration resistance, it can also protect assemblies from moisture, ozone, chemicals and other environmental hazards. 收起
Epoxies® 20-1625 Epoxies, Etc. Epoxies® 20-1625 is a two part optically clear silicone potting and encapsulating compound with a low viscosity and easy 1:1 ratio system. 20-1625 is formulated without solvents or other toxic materials and provides good heat resistance and is flame retar...展开 Epoxies® 20-1625 is a two part optically clear silicone potting and encapsulating compound with a low viscosity and easy 1:1 ratio system. 20-1625 is formulated without solvents or other toxic materials and provides good heat resistance and is flame retardant. 收起
Epoxies® 20-1634 Epoxies, Etc. Epoxies® 20-1634 is a low density, light weight, silicone potting and encapsulating compound. It utilizes an advanced micro balloon technology filler that is ideal for applications which require low weight, flexibility, high heat resistance, and excellent...展开 Epoxies® 20-1634 is a low density, light weight, silicone potting and encapsulating compound. It utilizes an advanced micro balloon technology filler that is ideal for applications which require low weight, flexibility, high heat resistance, and excellent electrical insulation properties. 20-1634 is formulated without solvents or other toxic materials. As a result, no by-products are released during the cure process and it is safe to handle. 收起
Epoxies® 20-1640 Epoxies, Etc. Epoxies® 20-1640 is a two part silicone elastomer potting and encapsulating compound that forms a soft and highly flexible electrically insulating package when cured. It can be used for potting or encapsulating electronic packages that have sensitive comp...展开 Epoxies® 20-1640 is a two part silicone elastomer potting and encapsulating compound that forms a soft and highly flexible electrically insulating package when cured. It can be used for potting or encapsulating electronic packages that have sensitive components. Due to its low stress during and after cure, this material will not crush or damage delicate components. 20-1640 is formulated without solvents or other toxic materials. As a result, no by-products released during cure and safe to handle. 收起
Epoxies® 20-1650 Epoxies, Etc. Epoxies® 20-1650 is a two part high temperature silicone potting and encapsulating compound and is formulated with iron oxide to impart increased stability at elevated temperatures. It can be used for potting or encapsulating electronic packages that have...展开 Epoxies® 20-1650 is a two part high temperature silicone potting and encapsulating compound and is formulated with iron oxide to impart increased stability at elevated temperatures. It can be used for potting or encapsulating electronic packages that have sensitive components. This material will not crush or damage delicate components due to its low stress during and after the curing process. 20-1650 is made without solvents or other toxic materials. As a result, no by-products are released during curing process and is safe to handle. 收起
Epoxies® 20-1700 Epoxies, Etc. Epoxies® 20-1700 is a two part, potting and encapsulating clear silicone gel that has a soft and fast cure process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protec...展开 Epoxies® 20-1700 is a two part, potting and encapsulating clear silicone gel that has a soft and fast cure process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1700 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. 收起
Epoxies® 20-1705 Epoxies, Etc. Epoxies® 20-1705 is a two part, potting and encapsulating clear silicone gel that has a firm and fast curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide prot...展开 Epoxies® 20-1705 is a two part, potting and encapsulating clear silicone gel that has a firm and fast curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1705 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. 收起
Epoxies® 20-1710 Epoxies, Etc. Epoxies® 20-1710 is a two part, potting and encapsulating clear silicone gel that has a soft and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide ...展开 Epoxies® 20-1710 is a two part, potting and encapsulating clear silicone gel that has a soft and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1710 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. 收起
Epoxies® 20-1715 Epoxies, Etc. Epoxies® 20-1715 is a two part, potting and encapsulating clear silicone gel that has a firm and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide ...展开 Epoxies® 20-1715 is a two part, potting and encapsulating clear silicone gel that has a firm and extended curing process. It has excellent electrical properties and their soft cushioning provide vibration and thermal shock protection. It can also provide protection from moisture, dust and other environmental contaminants. Due to its electrical properties, dielectric strength, and resistivity the 20-1715 can be used to encapsulate electronic components, junction boxes, power modules and LED’s. 收起
Epoxies® 20-2028 Epoxies, Etc. Epoxies® 20-2028 is a two part, light weight, closed cell, liquid polyurethane foaming resin system designed for potting and encapsulating. It is a water blown rigid foam that does not contain any hydrochlorofluorocarbon (HCFC). And thus, it is also safe...展开 Epoxies® 20-2028 is a two part, light weight, closed cell, liquid polyurethane foaming resin system designed for potting and encapsulating. It is a water blown rigid foam that does not contain any hydrochlorofluorocarbon (HCFC). And thus, it is also safer to use since it does not utilize MOCA or TDI. 20-2028 has been formulated for ease in handling with a convenient 1:1 mix ratio, low viscosity, and short demolding time. 收起
Epoxies® 20-2101 Epoxies, Etc. Epoxies® 20-2101 is a clear two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is ma...展开 Epoxies® 20-2101 is a clear two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is made from Natural Oil Polyol (NOP) obtained directly from a plant source without chemical modifications. Using renewable resources, such as NOP’s, will reduce the demand on non-renewable fossil fuels and reduce the overall production of carbon dioxide. 收起
Epoxies® 20-2121 Epoxies, Etc. Epoxies® is a clear to amber colored elastomeric potting and encapsulating compound made of polyurethane. Specifically formulated for electronic potting, encapsulating and casting applications, it is a two-component, low viscosity, room temperature curing...展开 Epoxies® is a clear to amber colored elastomeric potting and encapsulating compound made of polyurethane. Specifically formulated for electronic potting, encapsulating and casting applications, it is a two-component, low viscosity, room temperature curing system that does not contain TDI, MbOCA or Mercury. 20-2121 can be used to cushion and protect sensitive electronic components and will impart very little stress on components during cure or thermal cycling. 收起
Epoxies® 20-2160 Epoxies, Etc. Epoxies® 20-2160 is a black two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is ma...展开 Epoxies® 20-2160 is a black two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is made from Natural Oil Polyol (NOP) obtained directly from a plant source without chemical modifications. Using renewable resources, such as NOP’s, will reduce the demand on non-renewable fossil fuels and reduce the overall production of carbon dioxide. 收起
Epoxies® 20-2180 Epoxies, Etc. Epoxies® 20-2180 is a black two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is ma...展开 Epoxies® 20-2180 is a black two part polyurethane potting and encapsulating resin engineered for use in electronics and casting purposes. It is low in viscosity, low in toxicity and is suitable for a variety of electronic insulating applications. It is made from Natural Oil Polyol (NOP) obtained directly from a plant source without chemical modifications. Using renewable resources, such as NOP’s, will reduce the demand on non-renewable fossil fuels and reduce the overall production of carbon dioxide. 收起
Epoxies® 20-2330 Epoxies, Etc. Epoxies® 20-2330 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling p...展开 Epoxies® 20-2330 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling properties, low glass transition temperatures and low embedment stress to sensitive electronic components. Epoxies® 20-2330 can maintain its integrity over a wide operating temperature range. With a low glass transition temperature of approximately -70°C makes these urethanes ideal for low temperature potting applications. 收起
Epoxies® 20-2345 Epoxies, Etc. Epoxies® 20-2345 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling p...展开 Epoxies® 20-2345 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling properties, low glass transition temperatures and low embedment stress to sensitive electronic components. Epoxies® 20-2345 can maintain its integrity over a wide operating temperature range. With a low glass transition temperature of approximately -70°C makes these urethanes ideal for low temperature potting applications. 收起
Epoxies® 20-2362 FR Epoxies, Etc. Epoxies® 20-2362 FR is a two part, potting and encapsulating compound that has been formulated to meet the stringent non-burning requirements of UL-94 V-0. This system offers a unique combination of properties. 20-2362 is very low in viscosity, flame reta...展开 Epoxies® 20-2362 FR is a two part, potting and encapsulating compound that has been formulated to meet the stringent non-burning requirements of UL-94 V-0. This system offers a unique combination of properties. 20-2362 is very low in viscosity, flame retardant, has a glass transition temperature of -72°C, and has low moisture permeability. This product forms a soft elastomer that will cushion and protect sensitive electronic components. 收起
Epoxies® 20-2370 Epoxies, Etc. Epoxies® 20-2370 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling p...展开 Epoxies® 20-2370 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling properties, low glass transition temperatures and low embedment stress to sensitive electronic components. Epoxies® 20-2370 can maintain its integrity over a wide operating temperature range. With a low glass transition temperature of approximately -70°C makes these urethanes ideal for low temperature potting applications. 收起
Epoxies® 20-2390 Epoxies, Etc. Epoxies® 20-2390 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling p...展开 Epoxies® 20-2390 is a black, two part unfilled low durometer urethane elastomer used in potting, casting, and encapsulating. It is engineered to provide excellent hydrolytic stability and low moisture permeability. As well as outstanding thermal cycling properties, low glass transition temperatures and low embedment stress to sensitive electronic components. Epoxies® 20-2390 can maintain its integrity over a wide operating temperature range. With a low glass transition temperature of approximately -70°C makes these urethanes ideal for low temperature potting applications. 收起
Epoxies® 20-2521 Epoxies, Etc. Epoxies® 20-2521 is a black, two part, polyurethane potting and encapsulating compound that has very a very low viscosity and is ideal for use with delicate electronic components. It exhibits very low shrinkage, stress, and exotherm throughout the cure cy...展开 Epoxies® 20-2521 is a black, two part, polyurethane potting and encapsulating compound that has very a very low viscosity and is ideal for use with delicate electronic components. It exhibits very low shrinkage, stress, and exotherm throughout the cure cycle. Epoxies® 20-2521 is also well known for its outstanding thermal shock and excellent dielectric properties. It is also a good choice when exposure to salt water, mild acids and bases, and aliphatic hydrocarbons is expected. 收起
Epoxies® 20-2523 Epoxies, Etc. Epoxies® 20-2523 is a black, two part, high performance polyurethane potting and encapsulating compound that has very a very low viscosity and is ideal for use with delicate electronic components. It exhibits very low shrinkage, stress, and exotherm throu...展开 Epoxies® 20-2523 is a black, two part, high performance polyurethane potting and encapsulating compound that has very a very low viscosity and is ideal for use with delicate electronic components. It exhibits very low shrinkage, stress, and exotherm throughout the cure cycle. Epoxies® 20-2521 is also well known for its outstanding thermal shock and excellent dielectric properties. It is also a good choice when exposure to salt water, mild acids and bases, and aliphatic hydrocarbons is expected. 收起
Epoxies® 20-2621 Epoxies, Etc. Epoxies® 20-2621 is a crystal clear, two part, polyurethane potting and encapsulating compound designed for applications requiring "water like" clarity. This product curse at room temperature and will not yellow over time wile providing excellent environm...展开 Epoxies® 20-2621 is a crystal clear, two part, polyurethane potting and encapsulating compound designed for applications requiring "water like" clarity. This product curse at room temperature and will not yellow over time wile providing excellent environmental protection. 20-2621 is semi-flexible and will not place excess stress on electronic components. It also has a low viscosity, which facilitates easy flow and penetration into difficult areas. 收起
Epoxies® 20-3001 NC Epoxies, Etc. Epoxies® 20-3001 NC is a low viscosity, unfilled epoxy potting and encapsulating resin which forms a bubble free glass like finish upon curing. It is either black or clear and dose not contain any solvents. with a 1 to 1 mix ratio and lack of fillers, it ...展开 Epoxies® 20-3001 NC is a low viscosity, unfilled epoxy potting and encapsulating resin which forms a bubble free glass like finish upon curing. It is either black or clear and dose not contain any solvents. with a 1 to 1 mix ratio and lack of fillers, it is an ideal material for meter mixes and dispense equipment. 收起
Epoxies® 20-3004 HV Epoxies, Etc. Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates incl...展开 Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates including most metals and plastics. 20-3004's high viscosity prevents sagging and is noncorrosive. 收起
Epoxies® 20-3004 LV Epoxies, Etc. Epoxies® 20-3004 LV is a low viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates inclu...展开 Epoxies® 20-3004 LV is a low viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates including most metals and plastics. 20-3004's low viscosity lends itself to being a self leveling system and is noncorrosive. 收起
Epoxies® 20-3006 Epoxies, Etc. Epoxies® 20-3006 is a two part, flexible epoxy potting and encapsulating compound specially formulated to provide electrical insulation, chemical protection and thermal shock resistance. Its flexibility provides low stress on surface mounts and other deli...展开 Epoxies® 20-3006 is a two part, flexible epoxy potting and encapsulating compound specially formulated to provide electrical insulation, chemical protection and thermal shock resistance. Its flexibility provides low stress on surface mounts and other delicate electronic components. 20-3006 has an easy one to one mix ratio, and is D.O.T. non-hazardous. 收起
Epoxies® 20-3035 Epoxies, Etc. Epoxies® 20-3035 is a low density, to part epoxy potting and encapsulating compound with half the weight of most commercially available potting compounds on the market. it exhibits low shrinkage during the cure process with a low coefficient of thermal ex...展开 Epoxies® 20-3035 is a low density, to part epoxy potting and encapsulating compound with half the weight of most commercially available potting compounds on the market. it exhibits low shrinkage during the cure process with a low coefficient of thermal expansion. 20-3035 is an ideal materail for the potting of electron assemblies where a low dielectric constant and low weight are required. 收起
Epoxies® 20-3060 Epoxies, Etc. Epoxies® 20-3060 is a low viscosity, general purpose, epoxy potting and encapsulating resin made from 100% solids and dose not contain any solvents. It has exceptional resistance to impact, vibration, and thermal shock. In addition, this versatile resin s...展开 Epoxies® 20-3060 is a low viscosity, general purpose, epoxy potting and encapsulating resin made from 100% solids and dose not contain any solvents. It has exceptional resistance to impact, vibration, and thermal shock. In addition, this versatile resin system is machinable and ideal for use with meter mix dispensing equipment. 20-3060 is recommended for applications requiring the optimum in over-all properties and where rigid or flexible wire leads protrude directly from the encapsulation. It also adheres extremely well to lead materials, such as vinyl, neoprene, natural rubber, etc. 收起
Epoxies® 20-3064 NC Epoxies, Etc. Epoxies® 20-3064 NC is a filled, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3...展开 Epoxies® 20-3064 NC is a filled, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3064 NC provides excellent thermal shock resistance and outstanding adhesion. 收起
Epoxies® 20-3064 NC LV Epoxies, Etc. Epoxies® 20-3064 NC LV is a low viscosity, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Sho...展开 Epoxies® 20-3064 NC LV is a low viscosity, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3064 NC provides excellent thermal shock resistance and outstanding adhesion. 收起
Epoxies® 20-3068 Epoxies, Etc. Epoxies® 20-3068 is a two part epoxy adhesive and potting compound that can cure in room temperatures and has excellent chemical and corrosion resistance. This product provides good water resistance, adhesion, and toughness and is well suited for use with...展开 Epoxies® 20-3068 is a two part epoxy adhesive and potting compound that can cure in room temperatures and has excellent chemical and corrosion resistance. This product provides good water resistance, adhesion, and toughness and is well suited for use with most electronics. 20-3068 Epoxy System meets the Food and Drug Administration (FDA) regulations permitting use in “indirect” food contact applications. The raw materials used in the products comply with the FDA regulations of Title 21 Code of Federal Regulations under Sections 175.105 and 175.300. 收起
Epoxies® 20-3236 Epoxies, Etc. Epoxies® 20-3236 is a low viscosity, copolymer elastomer made of a modified epoxy resin that is specifically designed for bonding vinyls and neoprenes. It can be used in many difficult bonding applications and has an extended working time with a convenien...展开 Epoxies® 20-3236 is a low viscosity, copolymer elastomer made of a modified epoxy resin that is specifically designed for bonding vinyls and neoprenes. It can be used in many difficult bonding applications and has an extended working time with a convenient 2:1 mix ratio. 20-3236 Resin can also be used for the encapsulation of vinyl insulated electrical components or sealing vinyl lead wires. 收起
Epoxies® 20-3300 Epoxies, Etc. Epoxies® 20-3300 is a two part, high temperature and thermal shock epoxy formulated to meet the most critical electronic encapsulating requirements. It has low shrinkage, high tensile and compressive strength. 20-3300 has a convenient 1:1 mix ratio with ...展开 Epoxies® 20-3300 is a two part, high temperature and thermal shock epoxy formulated to meet the most critical electronic encapsulating requirements. It has low shrinkage, high tensile and compressive strength. 20-3300 has a convenient 1:1 mix ratio with an extended pot life and has excellent adhesion to most substrates and forms a hermetic like seal to protect encapsulated parts. Well suited for high voltage applications. 收起
Epoxies® 20-3302 Epoxies, Etc. Epoxies® 20-3302 is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides excel...展开 Epoxies® 20-3302 is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides excellent optical transmission along with outstanding adhesion and electrical properties. 20-3302 is a low viscosity system designed for L.E.D. encapsulating, fiber optics, and any potting or adhesive application requiring a bubble free and glass smooth finish with optimum clarity. 收起
Epoxies® 20-3302NCLV Epoxies, Etc. Epoxies® 20-3302NCLV is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides e...展开 Epoxies® 20-3302NCLV is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides excellent optical transmission along with outstanding adhesion and electrical properties. 20-3302NCLV is a very low viscosity system designed for L.E.D. encapsulating, fiber optics, and any potting or adhesive application requiring a bubble free and glass smooth finish with optimum clarity. 收起
Epoxies® 40-3900 Epoxies, Etc. Epoxies® 40-3900 is a two part, silver filled, epoxy resin adhesive that is electrically conductive and has a very low resistance value of less than 1x10-4 ohm-cm. 40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic...展开 Epoxies® 40-3900 is a two part, silver filled, epoxy resin adhesive that is electrically conductive and has a very low resistance value of less than 1x10-4 ohm-cm. 40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic applications. Due to its excellent continuity, it has also been used extensively in applications such as micro-wave EMI and RFI shielding, in the assembly or repair of printed circuit boards, wave guides, electronic modules, flat cable, high frequency shields, connectors, circuitry, and as a cold solder. 收起
Epoxies® 40-3905 Epoxies, Etc. Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epo...展开 Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epoxy filled with pure silver for improved electrical conduction and heat transfer. It has outstanding adhesion to plastics, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic, and printed circuit boards. 40-3905 can also be thinned with up to 10% Toluol for many coating applications. 收起
Epoxies® 40-3909 Epoxies, Etc. Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternat...展开 Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternative to many silver filled epoxy systems. 40-3909 has a convenient 1:1 mix ratio by weight and can cure at room temperature overnight but can also be accelerated with mild heat. It is well suited for use in the assembly or repairs of printed circuit boards, connectors, wave guides, high frequency shields, and as a cold solder. 收起
Epoxies® 40-3911 Epoxies, Etc. Epoxies® 40-3911 is an electrically conductive, silver filled, epoxy adhesive that is formulated without solvents and is 100% solids. Because of it is highly filled with silver, it has a very low volume resistance rating of 5 X 10-4 ohm-cm. This one part ...展开 Epoxies® 40-3911 is an electrically conductive, silver filled, epoxy adhesive that is formulated without solvents and is 100% solids. Because of it is highly filled with silver, it has a very low volume resistance rating of 5 X 10-4 ohm-cm. This one part system cures quickly at elevated temperatures making it a suitable adhesive for many electronic assembly operations. And it is a good choice for lid sealing and die bonding applications. 收起
Epoxies® 50-3100 Epoxies, Etc. Epoxies® 50-3100 is a high thermal K heat transfer epoxy resin designed for fast and continuous heat transfer. Primarily used for the encapsulation of power supplies, transformers, coils, insulators, protective covering for chips, temperature probes, etc....展开 Epoxies® 50-3100 is a high thermal K heat transfer epoxy resin designed for fast and continuous heat transfer. Primarily used for the encapsulation of power supplies, transformers, coils, insulators, protective covering for chips, temperature probes, etc. 50-3100 measures several times faster heat dissipation than other commercially available types and can be easily mixed and poured to form a dimensionally stable heat transfer package. 收起
Epoxies® 50-3112 Epoxies, Etc. Epoxies® 50-3112 is a two part, fast curing thermally conductive epoxy adhesive. Dark grey in color when mixed, this product a simple 1:1 mix ratio and develops a 1,400 psi Lap Shear strength bond (aluminum to aluminum) in four hours at room temperature ...展开 Epoxies® 50-3112 is a two part, fast curing thermally conductive epoxy adhesive. Dark grey in color when mixed, this product a simple 1:1 mix ratio and develops a 1,400 psi Lap Shear strength bond (aluminum to aluminum) in four hours at room temperature and 2,200 psi. just after 20 hours. 50-3112 offers fast heat dissipation for a wide range of electronic applications. The black resin and white hardener provide an excellent visual indication of a complete mix. 收起
Epoxies® 50-3122 Epoxies, Etc. Epoxies® 50-3122 is a one part epoxy adhesive with both high sheer and high peel strength properties. It is also able to maintain exceptionally strong bonds over a wide temperature range of -60 to +205°C. 50-3122 is both a thermally conductive and electri...展开 Epoxies® 50-3122 is a one part epoxy adhesive with both high sheer and high peel strength properties. It is also able to maintain exceptionally strong bonds over a wide temperature range of -60 to +205°C. 50-3122 is both a thermally conductive and electrically insulating epoxy adhesive. It is suitable for electronic, electrical, aerospace, appliance, automotive and industrial applications. 收起
Epoxies® 50-3150 FR Epoxies, Etc. Epoxies® 50-3150 is a flame retardant, thermally conductive epoxy resin that has been formulated to meet the stringent non-burning requirements of UL94 V-0. It is a black epoxy mixed with catalyst 190 and catalyst 30 and offers great heat transfer, low sh...展开 Epoxies® 50-3150 is a flame retardant, thermally conductive epoxy resin that has been formulated to meet the stringent non-burning requirements of UL94 V-0. It is a black epoxy mixed with catalyst 190 and catalyst 30 and offers great heat transfer, low shrinkage, and outstanding insulation properties. Primarily used for encapsulating power supplies, transformers, coils, insulators, sensors, etc... Epoxies® 50-3150 FR is an excellent choice for applications requiring high thermal conductivity and flame retardancy. 收起
Epoxies® 50-3151 NC FR Epoxies, Etc. Epoxies® 50-3151 NC FR is a low viscosity flame retardant made of a thermally conductive epoxy resin that has been developed to meet the stringent non-burning requirements of UL 94 V-0. This system offers excellent heat transfer, low shrinkage, and outsta...展开 Epoxies® 50-3151 NC FR is a low viscosity flame retardant made of a thermally conductive epoxy resin that has been developed to meet the stringent non-burning requirements of UL 94 V-0. This system offers excellent heat transfer, low shrinkage, and outstanding insulation properties. Primarily used in encapsulating power supplies, transformers, coils, insulators, sensors, etc... Epoxies® 50-3151 NC FR is an excellent choice for applications requiring high thermal conductivity, flame retardancy, and low viscosity. 收起
Epoxies® 50-3152 FR Epoxies, Etc. Epoxies® 50-3152 FR is a flame retardant, thermally conductive potting and encapsulating compound that has been formulated to meet the strict non-burning requirements of UL 94-0. It is a two part epoxy that turns black when cured and has excellent shock a...展开 Epoxies® 50-3152 FR is a flame retardant, thermally conductive potting and encapsulating compound that has been formulated to meet the strict non-burning requirements of UL 94-0. It is a two part epoxy that turns black when cured and has excellent shock and vibration resistance along with good thermal conductivity. Epoxies® 50-3152 FR is low in viscosity and is designed for ease of use with a convenient 1:1 mix ratio. 收起
Epoxies® 50-3170 Epoxies, Etc. Epoxies® 50-3170 is a high performance, thermally conductive epoxy rubber formulation designed for those applications requiring excellent electrical insulation and low stress during cure. The resin has a rubber consistency and retains its properties and f...展开 Epoxies® 50-3170 is a high performance, thermally conductive epoxy rubber formulation designed for those applications requiring excellent electrical insulation and low stress during cure. The resin has a rubber consistency and retains its properties and flexibility on long term aging. This allows pottings and castings to be probed for detection of electrical failure. 50-3170 can be used for bonding sensitive components or for potting of power supplies, coils, glass diodes, and other delicate assemblies. This new formulation can be used successfully for transformers, regulators, PCB's, etc... 收起
Epoxies® 50-3182 NC Epoxies, Etc. Epoxies® 50-3182 NC is a highly filled, thermally conductive epoxy resin with excellent physical, electrical and thermal properties. It is formulated for applications where electrical insulation and mechanical protection must be maintained while transferr...展开 Epoxies® 50-3182 NC is a highly filled, thermally conductive epoxy resin with excellent physical, electrical and thermal properties. It is formulated for applications where electrical insulation and mechanical protection must be maintained while transferring heat. 50-3182 NC is designed to work with a variety of catalysts to adjust additional properties including toughness, viscosity, thermal and mechanical shock values and cure times. This product is well suited for high voltage applications such as power supplies, transformers, high voltage insulators, bushings, etc... 收起
Epoxies® 50-3185 NC Epoxies, Etc. Epoxies® 50-3185 NC is a filled, thermally conductive potting and encapsulating resin with excellent physical, electrical and thermal properties. It is well suited for applications where low thermal expansion, outstanding electrical insulation and/or high...展开 Epoxies® 50-3185 NC is a filled, thermally conductive potting and encapsulating resin with excellent physical, electrical and thermal properties. It is well suited for applications where low thermal expansion, outstanding electrical insulation and/or high thermal conductivity is required. 50-3185 NC is designed to work with a variety of catalysts to adjust additional properties including toughness, viscosity, thermal and mechanical shock values and cure times. This product is well suited for high voltage applications such as power supplies, transformers, high voltage insulators, bushings, etc... 收起
Epoxies® 50-3186 NC Epoxies, Etc. Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal e...展开 Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal expansion, and high operating temperature performance. 收起
Epoxies® 70-3812 NC Epoxies, Etc. Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulate...展开 Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulated with a unique combination of fillers, particle sizes and dispersion techniques. It is well suited for use with a variety of heat sink applications and its viscosity is particularly good for Fin bonding. 收起
Gum Rosin K Resin Chemicals Co., Ltd. Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin M Resin Chemicals Co., Ltd. Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin N Resin Chemicals Co., Ltd. Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin WG Resin Chemicals Co., Ltd. Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin WW Resin Chemicals Co., Ltd. Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin X Resin Chemicals Co., Ltd. Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
HESS NCS-10 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-12 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-15 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-3 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-5 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-8 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HH-2100 Zhejiang Henghe Petrochemical Co., Ltd. HH-2100 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2110 Zhejiang Henghe Petrochemical Co., Ltd. HH-2210 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2120 Zhejiang Henghe Petrochemical Co., Ltd. HH-2120 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2130 Zhejiang Henghe Petrochemical Co., Ltd. HH-2130 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2203 Zhejiang Henghe Petrochemical Co., Ltd. HH-2203 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
Heavy Turpentine Oil Resin Chemicals Co., Ltd. Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起
Hydrocarbon DCPD Resin HSU100 Resin Chemicals Co., Ltd. Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起
Hydrocarbon Resin C5 HPE100A Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrocarbon Resin C5 HPE100A-L Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrocarbon Resin C5 HPE100R Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起
Hydrocarbon Resin C5 HPE100R-S Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起
Hydrocarbon Resin C9 HPE100P Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE100P-D Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120P Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120P-D Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120PL Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrogenated Hydrocarbon Resin C5 HPE100H Resin Chemicals Co., Ltd. Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrogenated Hydrocarbon Resin C9 HFM-100 Resin Chemicals Co., Ltd. Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起
Hydrogenated Rosin Ester Resin Chemicals Co., Ltd. Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起
Hydrogenated Rosin-A Resin Chemicals Co., Ltd. Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-B Resin Chemicals Co., Ltd. Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-C Resin Chemicals Co., Ltd. Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-D Resin Chemicals Co., Ltd. Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Liquid Rosin Ester LRE-1 Resin Chemicals Co., Ltd. Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue.
PR-100 Zhejiang Henghe Petrochemical Co., Ltd. PR-100 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-110 Zhejiang Henghe Petrochemical Co., Ltd. PR-110 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-50 Zhejiang Henghe Petrochemical Co., Ltd. PR-50 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-60 Zhejiang Henghe Petrochemical Co., Ltd. PR-60 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.