UL Prospector

成功!

成功保存搜索结果
10 Micron Red Oxide Diamond Nano Microns Pvt. Ltd. 10 Micron Red Oxide is a brighter red oxide that is widely known for having high inertness to alkali and chemicals along with anti-corrosive properties. This product is highly pure of containing 90% Fe2O3. 10 Micron Red Oxide is primarily used as an addit...展开 10 Micron Red Oxide is a brighter red oxide that is widely known for having high inertness to alkali and chemicals along with anti-corrosive properties. This product is highly pure of containing 90% Fe2O3. 10 Micron Red Oxide is primarily used as an additive in paints and coatings. 收起
Alcohol Soluble Maleic Resin WMR110 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Alcohol Soluble Maleic Resin WMR130 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
Alcohol Soluble Maleic Resin WMR150 Resin Chemicals Co., Ltd. Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起
C5-F(A123) Zhejiang Henghe Petrochemical Co., Ltd. C5-F(A123) is a transparent, straw yellow solid grain. This product is a petroleum resin that is used in adhesives, reinforcing agents, and fillers.
C9-L Zhejiang Henghe Petrochemical Co., Ltd. C9-L is a light petroleum resin. It is generally used with other resins as promoters, adjusting agents, and modifiers. It can be used to make paints, rubbers, adhesives, and printing inks.
D Carb 10 Microns Diamond Nano Microns Pvt. Ltd. D Carb 10 Micron is a snow white calcium carbonate powder that naturally occurs and provides water resistant properties. This product provides high brightness and has a particle size that ranges from 2.8μ-10μ. D Carb 10 Micron can be primarily used as an ...展开 D Carb 10 Micron is a snow white calcium carbonate powder that naturally occurs and provides water resistant properties. This product provides high brightness and has a particle size that ranges from 2.8μ-10μ. D Carb 10 Micron can be primarily used as an additive in paints and coatings. 收起
D Carb 2 Micron Diamond Nano Microns Pvt. Ltd. D Carb 2 Micron is a snow white calcium carbonate powder that naturally occurs and provides water resistant properties. This product provides high brightness and has a particle size that ranges from 2μ-8μ. D Carb 2 Micron can be primarily used as an addit...展开 D Carb 2 Micron is a snow white calcium carbonate powder that naturally occurs and provides water resistant properties. This product provides high brightness and has a particle size that ranges from 2μ-8μ. D Carb 2 Micron can be primarily used as an additive in paints and coatings. 收起
D Carb 2T Diamond Nano Microns Pvt. Ltd. D Carb 2T Micron is a snow white calcium carbonate powder that naturally occurs and provides water resistant properties. This product provides high brightness and has a particle size that ranges from 2μ-8μ. D Carb 2T Micron can be primarily used as an add...展开 D Carb 2T Micron is a snow white calcium carbonate powder that naturally occurs and provides water resistant properties. This product provides high brightness and has a particle size that ranges from 2μ-8μ. D Carb 2T Micron can be primarily used as an additive in paints and coatings. 收起
Dia Talc 90 Diamond Nano Microns Pvt. Ltd. Dia Talc 90 is a white-off white naturally occuring steatite that is calcium free. This product has an oil absorption of 35gm/100gm ± 5gm/100gm. Dia Talc 90 is primarily used as an additive in paints.
Dia Talc 95 Diamond Nano Microns Pvt. Ltd. Dia Talc 95 is a white-off white naturally occuring steatite that is calcium free. This product has an oil absorption of 35gm/100gm ± 5gm/100gm. Dia Talc 95 is primarily used as an additive in paints.
Diagrey 30 Diamond Nano Microns Pvt. Ltd. Diagrey 30 is a grey naturally occurring barium sulfate with weather resistant properties. This product has a particle size of 4μ ± 2μ and is formulated to be an extender to surface coatings with UV and light resistance and acid alkali resistance. It can ...展开 Diagrey 30 is a grey naturally occurring barium sulfate with weather resistant properties. This product has a particle size of 4μ ± 2μ and is formulated to be an extender to surface coatings with UV and light resistance and acid alkali resistance. It can easily disperse in all types of resin systems allowing it to be also used as a filler. Diagrey 30 is primarily used as an additive in coatings. 收起
Diaoxide 4.5 Diamond Nano Microns Pvt. Ltd. Diaoxide 4.5 is a blackish brown naturally occurring micaceous iron oxide with chemical resistant properties. This product has a platelet structure that makes it fit for a pigment in anti-corrosive paints. Diaoxide 4.5 is primarily used as an additive in ...展开 Diaoxide 4.5 is a blackish brown naturally occurring micaceous iron oxide with chemical resistant properties. This product has a platelet structure that makes it fit for a pigment in anti-corrosive paints. Diaoxide 4.5 is primarily used as an additive in paints and coatings. 收起
Diaoxide 4.8 Diamond Nano Microns Pvt. Ltd. Diaoxide 4.8 is a blackish brown naturally occurring micaceous iron oxide with chemical resistant properties. This product has a platelet structure that makes it fit for a pigment in anti-corrosive paints. Diaoxide 4.8 is primarily used as an additive in ...展开 Diaoxide 4.8 is a blackish brown naturally occurring micaceous iron oxide with chemical resistant properties. This product has a platelet structure that makes it fit for a pigment in anti-corrosive paints. Diaoxide 4.8 is primarily used as an additive in paints and coatings. 收起
Diaoxide 5.05 Diamond Nano Microns Pvt. Ltd. Diaoxide 5.05 is a blackish brown naturally occurring micaceous iron oxide with chemical resistant properties. This product has a platelet structure that makes it fit for a pigment in anti-corrosive paints. Diaoxide 5.05 is primarily used as an additive i...展开 Diaoxide 5.05 is a blackish brown naturally occurring micaceous iron oxide with chemical resistant properties. This product has a platelet structure that makes it fit for a pigment in anti-corrosive paints. Diaoxide 5.05 is primarily used as an additive in paints and coatings. 收起
Diasil 30 Diamond Nano Microns Pvt. Ltd. Diasil 30 is a white highly pure silica that has brightness, reflectance, color consistency and oil absorbing properties. This product can improve tint retention, durability and provides resistance to dirt, mildew, cracking and weathering. It has low oil ...展开 Diasil 30 is a white highly pure silica that has brightness, reflectance, color consistency and oil absorbing properties. This product can improve tint retention, durability and provides resistance to dirt, mildew, cracking and weathering. It has low oil absorption which increases pigment loading for finished colors. It has a brightness of 92%. Diasil 30 is primarily used as an additive in paints and coatings that impart abrasion and corrosion resistance. 收起
Diasil 60 Diamond Nano Microns Pvt. Ltd. Diasil 60 is a white highly pure silica that has brightness, reflectance, color consistency and oil absorbing properties. This product can improve tint retention, durability and provides resistance to dirt, mildew, cracking and weathering. It has low oil ...展开 Diasil 60 is a white highly pure silica that has brightness, reflectance, color consistency and oil absorbing properties. This product can improve tint retention, durability and provides resistance to dirt, mildew, cracking and weathering. It has low oil absorption which increases pigment loading for finished colors. It has a brightness that ranges from 94%-95%. Diasil 60 is primarily used as an additive in paints and coatings that impart abrasion and corrosion resistance. 收起
Diasil 90 Diamond Nano Microns Pvt. Ltd. Diasil 90 is a white highly pure silica that has brightness, reflectance, color consistency and oil absorbing properties. This product can improve tint retention, durability and provides resistance to dirt, mildew, cracking and weathering. It has low oil ...展开 Diasil 90 is a white highly pure silica that has brightness, reflectance, color consistency and oil absorbing properties. This product can improve tint retention, durability and provides resistance to dirt, mildew, cracking and weathering. It has low oil absorption which increases pigment loading for finished colors. It has a brightness that ranges from 96%-98%. Diasil 90 is primarily used as an additive in paints and coatings that impart abrasion and corrosion resistance. 收起
Disproportionated Rosin 1st Grade Resin Chemicals Co., Ltd. Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起
Disproportionated Rosin Extra Grade Resin Chemicals Co., Ltd. Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起
Fintac2331 Non-Crystallizing Rosin Finjet Chemical Industries, Ltd. Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water...展开 Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water-based adhesives, pressure sensitive sealants, and alcohol soluble printing inks and paints. 收起
Fintac2333 Modified Rosin Resin Finjet Chemical Industries, Ltd. Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also...展开 Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also applicable for alcohol soluble paints and inks. 收起
Fintac5336 Polymerized Rosin Finjet Chemical Industries, Ltd. Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and pain...展开 Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and paints. 收起
Gum Rosin K Resin Chemicals Co., Ltd. Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin M Resin Chemicals Co., Ltd. Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin N Resin Chemicals Co., Ltd. Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin WG Resin Chemicals Co., Ltd. Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin WW Resin Chemicals Co., Ltd. Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Gum Rosin X Resin Chemicals Co., Ltd. Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
HESS NCS-10 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-12 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-15 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-3 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-5 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-8 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HH-2100 Zhejiang Henghe Petrochemical Co., Ltd. HH-2100 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2110 Zhejiang Henghe Petrochemical Co., Ltd. HH-2210 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2120 Zhejiang Henghe Petrochemical Co., Ltd. HH-2120 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2130 Zhejiang Henghe Petrochemical Co., Ltd. HH-2130 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
HH-2203 Zhejiang Henghe Petrochemical Co., Ltd. HH-2203 is a hydrogenated C5/C9 petroleum resin. It is a thermoplastic resin obtained from polymerizing C5/aromatic and hydrogenation. It can be used as a tackifier for hot melt adhesives and hot melt pressure sensitive adhesive.
Heavy Turpentine Oil Resin Chemicals Co., Ltd. Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起
Hydrocarbon DCPD Resin HSU100 Resin Chemicals Co., Ltd. Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起
Hydrocarbon Resin C5 HPE100A Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrocarbon Resin C5 HPE100A-L Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrocarbon Resin C5 HPE100R Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起
Hydrocarbon Resin C5 HPE100R-S Resin Chemicals Co., Ltd. Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起
Hydrocarbon Resin C9 HPE100P Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE100P-D Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120P Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120P-D Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrocarbon Resin C9 HPE120PL Resin Chemicals Co., Ltd. Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起
Hydrogenated Hydrocarbon Resin C5 HPE100H Resin Chemicals Co., Ltd. Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Hydrogenated Hydrocarbon Resin C9 HFM-100 Resin Chemicals Co., Ltd. Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起
Hydrogenated Rosin Ester Resin Chemicals Co., Ltd. Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起
Hydrogenated Rosin-A Resin Chemicals Co., Ltd. Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-B Resin Chemicals Co., Ltd. Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-C Resin Chemicals Co., Ltd. Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Hydrogenated Rosin-D Resin Chemicals Co., Ltd. Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C.
Liquid Rosin Ester LRE-1 Resin Chemicals Co., Ltd. Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue.
Micron Barytes CL-199 Diamond Nano Microns Pvt. Ltd. Micron Barytes CL-199 is a snow white naturally occurring barium sulfate with weather resistant properties. This product has particle of 3μ ± 2μ and is formulated to be an extender to surface coatings with UV and light resistance and acid alkali resistanc...展开 Micron Barytes CL-199 is a snow white naturally occurring barium sulfate with weather resistant properties. This product has particle of 3μ ± 2μ and is formulated to be an extender to surface coatings with UV and light resistance and acid alkali resistance. It can easily disperse in all types of resin systems allowing it to be also used as a filler. Micron Barytes CL-199 is primarily used as an additive in coatings. 收起
Micron Barytes CL-199 SP Diamond Nano Microns Pvt. Ltd. Micron Barytes CL-199 SP is a snow white naturally occurring barium sulfate with weather resistant properties. This product has a particle size of 2.5μ ± 1μ and is formulated to be an extender to surface coatings with UV and light resistance and acid alka...展开 Micron Barytes CL-199 SP is a snow white naturally occurring barium sulfate with weather resistant properties. This product has a particle size of 2.5μ ± 1μ and is formulated to be an extender to surface coatings with UV and light resistance and acid alkali resistance. It can easily disperse in all types of resin systems allowing it to be also used as a filler. Micron Barytes CL-199 SP is primarily used as an additive in coatings. 收起
Micron Barytes CL-399 Diamond Nano Microns Pvt. Ltd. Micron Barytes CL-399 is a snow white naturally occurring barium sulfate with weather resistant properties. This product has a particle size of 4μ ± 2μ and is formulated to be an extender to surface coatings with UV and light resistance and acid alkali re...展开 Micron Barytes CL-399 is a snow white naturally occurring barium sulfate with weather resistant properties. This product has a particle size of 4μ ± 2μ and is formulated to be an extender to surface coatings with UV and light resistance and acid alkali resistance. It can easily disperse in all types of resin systems allowing it to be also used as a filler. Micron Barytes CL-399 is primarily used as an additive in coatings. 收起
Micron Talc RC 3030 Diamond Nano Microns Pvt. Ltd. Micron Talc RC 3030 is a white-off white naturally occuring steatite that is calcium free. This product has an oil absorption of 42gm/100gm ± 3gm/100gm. Micron Talc RC 3030 is primarily used as an additive in paints.
Micron Talc RC 399 Diamond Nano Microns Pvt. Ltd. Micron Talc RC 399 is a white-off white naturally occuring steatite that is calcium free. This product has an oil absorption of 45gm/100gm ± 3gm/100gm. Micron Talc RC 399 is primarily used as an additive in paints.
PR-100 Zhejiang Henghe Petrochemical Co., Ltd. PR-100 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-110 Zhejiang Henghe Petrochemical Co., Ltd. PR-110 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-50 Zhejiang Henghe Petrochemical Co., Ltd. PR-50 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-60 Zhejiang Henghe Petrochemical Co., Ltd. PR-60 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-80 Zhejiang Henghe Petrochemical Co., Ltd. PR-80 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
PR-90 Zhejiang Henghe Petrochemical Co., Ltd. PR-90 is a dark brown flake solid. It is made by C9 fraction, a by-product of ethylene, through thermo-polymerization. It is suitable for paint, printing ink, and rubber assistant agent.
Polymerized Rosin Resin Chemicals Co., Ltd. Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起
Refined Gum Rosin Resin Chemicals Co., Ltd. Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起
Refined Rosin Modified Resin GE-85L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin GE-90L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-100L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-105L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Refined Rosin Modified Resin PE-95L Resin Chemicals Co., Ltd. Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起
Rosin Modified Maleic Resin MR-130 Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起
Rosin Modified Maleic Resin MR-130D Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起
Rosin Modified Maleic Resin MR115R Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起
Rosin Modified Maleic Resin MR120R Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起
Rosin Modified Maleic Resin MR125R Resin Chemicals Co., Ltd. Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起
Rosin Modified Phenolic Resin PI116 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI118 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI136 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI138 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI142 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI145 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI146 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI147 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI148 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI149 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI152 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI155 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Phenolic Resin PI160 Resin Chemicals Co., Ltd. Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起
Rosin Modified Resin GE85 Resin Chemicals Co., Ltd. Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Rosin Modified Resin GE90 Resin Chemicals Co., Ltd. Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Rosin Modified Resin PE 105 Resin Chemicals Co., Ltd. Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Rosin Modified Resin PE100 Resin Chemicals Co., Ltd. Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...展开 Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起
Rosin Modified Resin PE95 Resin Chemicals Co., Ltd. Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...展开 Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起