| BT-B100 CMIT | BioTio Group | BT-B100 CMIT is a colorless to amber liquid that has a specific gravity of 1.26-1.32 and a pH value of 1.0-4.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
| BT-B100 MIT | BioTio Group | BT-B100 MIT is a greenish liquid that has a specific gravity of 1.10-1.20 and a pH value of 2.0-5.0. This product is most commonly used as a preservative in paints, resin emulsions, oil-water emulsions, and coating applications. | |
| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-B102 DBNPA | BioTio Group | BT-B102 DBNPA is a white crystalline powder that has a moisture content of ≤0.5% and a pH value of 4.0-6.0. This product is most commonly used as a biocide and preservative in paint applications. | |
| BT-B103 MIT | BioTio Group | BT-B103 MIT is a colorless to amber liquid that has a specific gravity of ≥1.10 and a pH value of 5.0-7.0. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil-water emulsion applications. | |
| BT-B104 IPBC | BioTio Group | BT-B104 IPBC is a white crystalline powder that has a melting point of 65-68°C and a moisture content of ≤0.10%. This product is most commonly used as a highly effective fungicide in coatings and paint applications. | |
| BT-B105 BIT | BioTio Group | BT-B105 BIT is a white to light yellow powder that has a melting point of 155-158°C and a moisture content of ≤15%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B106 OIT | BioTio Group | BT-B106 OIT is an amber liquid that has a specific gravity of ≤1.1% and a moisture content of <0.5%. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B107 DCOIT | BioTio Group | BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold,...展开 BT-B107 DCOIT is a white crystalline powder that has a melting point of 42.2-42.8°C and a moisture content of ≤0.10%. This product is most commonly used to provide broad-spectrum protection against degradation, discoloration and defacement caused by mold, mildew and algae. It can be used in antifouling paint and other coatings. 收起 | |
| BT-B110 PCMC | BioTio Group | BT-B110 PCMC is a white to off-white crystalline powder that has a melting point of 114-116°C and a moisture content of <2.0%. This product is most commonly used as an antiseptic or antifungal agent in paint applications. | |
| BT-B112 ZPT | BioTio Group | BT-B112 ZPT is a white to off-white powder that has a pH value of 6.5-8.5 and a content/assay of ≥96%. This product is most commonly used as an antibacterial agent in coatings, paints, and adhesives. | |
| BT-B115 BBIT | BioTio Group | BT-B115 BBIT is a light pink, clear liquid that has a pH value of 6.5-8.0 and a density of 1.17 g/cm3. This product is most commonly used as a biocide and preservative in coatings, paints, resin emulsions, and oil water emulsion applications. | |
| BT-B117 DBDCB | BioTio Group | BT-B117 DBDCB is a white crystalline powder that has a melting point of 50.0-54.5°C and a content/assay of ≥99%. This product is most commonly used as a preservative in coatings. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展开 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| Non-Leafing Aluminum Paste BT-AP110 | BioTio Group | Non-Leafing Aluminum Paste BT-AP110 is a high pure aluminum powder that has a pigment content of 60±2% and an average particle size of 15μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP120 | BioTio Group | Non-Leafing Aluminum Paste BT-AP120 is a high pure aluminum powder that has a pigment content of 60±2% and an average particle size of 15μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP130 | BioTio Group | Non-Leafing Aluminum Paste BT-AP130 is a high pure aluminum powder that has a pigment content of 62±2% and an average particle size of 16μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Non-Leafing Aluminum Paste BT-AP140 | BioTio Group | Non-Leafing Aluminum Paste BT-AP140 is a high pure aluminum powder that has a pigment content of 62±2% and an average particle size of 7μm. This product is most commonly used in marine paints, decorative and aerosol finishes, and coil coatings. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Titanium Dioxide Anatase BT-A10 | BioTio Group | Titanium Dioxide Anatase BT-A10 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A101 | BioTio Group | Titanium Dioxide Anatase BT-A101 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A102 | BioTio Group | Titanium Dioxide Anatase BT-A102 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in road marking and exterior paint applications. | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A12 | BioTio Group | Titanium Dioxide Anatase BT-A12 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Anatase BT-A125 | BioTio Group | Titanium Dioxide Anatase BT-A125 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Anatase BT-A126 | BioTio Group | Titanium Dioxide Anatase BT-A126 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R20 | BioTio Group | Titanium Dioxide Rutile BT-R20 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R201 | BioTio Group | Titanium Dioxide Rutile BT-R201 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R202 | BioTio Group | Titanium Dioxide Rutile BT-R202 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in latex paint applications. | |
| Titanium Dioxide Rutile BT-R21 | BioTio Group | Titanium Dioxide Rutile BT-R21 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R213 | BioTio Group | Titanium Dioxide Rutile BT-R213 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R214 | BioTio Group | Titanium Dioxide Rutile BT-R214 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior paints and traffic marking applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展开 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展开 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展开 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Application Seminar | NETZSCH Grinding & Dispersing | 应用研讨会，旨在传授搅拌珠磨机的理论背景知识和功能。讨论了重要操作参数对碾磨工艺的影响，演示了各种程序。为了解释影响因素，通过实验室碾磨机LabStar以及生产大规模机器进行了实际的测试。然后我们讨论了粒径的表征方法以及悬浮液的稳定 | |
| Condux Fine Classifier CFS/HD-S | NETZSCH Grinding & Dispersing | 高效空气分级筛，设计用于超细、快速分离，经常结合碾磨设备使用。CONDUX Fine Classifier CFS通常用于过筛仪器不能满足分离极限的情况。可获得最佳的窄度以及最高的产率，用于分离粗粒径和细粒径，通常可碾磨至约30 µm 到150 µm (d99) |  |
| Condux Fluidized Bed Jet Mill CGS | NETZSCH Grinding & Dispersing | 该革新型的气流粉碎机可碾磨细各种干的产品，几乎不会产生污染。可选各种容量，包括实验室规模设备用于研发或小型生产，以及大型生产规模的设备，可碾磨的产品量从几kg/h到几t/h |  |
| Fine Grinding Service | NETZSCH Grinding & Dispersing | NETZSCH-CONDUX Mahltechnik in Hanau提供的服务包括提供最现代的机器和设备以及训练有素的专业员工进行工艺监督和支持。作为在干碾磨以及细筛分领域世界领先的公司，我们了解什么方面对你来说最重要。我们多种多样的机器程序可为你的要求提供正确的解决方案。我们对于该领域各种产品的长期经验可帮助你定制你的碾磨需求 |  |
| High-Speed Mill System Zeta® Type LMZ | NETZSCH Grinding & Dispersing | 高速碾磨系统Zeta®可优化你的产能、能源需求和品质。循环操作和多通道操作设计，可使你获得高产能和高品质，窄粒径分布，可用于更高粘度产品。最小额度控制上的支出是为了确保最高的重现性和省却额外成本。人体工学设计，产品转换和清洗容易，可简化日常操作 |  |
| Horizontal Disk Mill | NETZSCH Grinding & Dispersing | 水平圆盘式碾磨机LME和LMK，是连续工作的实验室和生产设备，适合各种应用。圆盘搅拌器轴可高强度地激活碾磨介质充满整个碾磨室。高效分离设备可分离你的产品和碾磨介质。供应各种材料设计和尺寸大小，从实验室到生产规模，可为特定应用定制 |  |
| Laboratory Agitator Bead Mill LabStar | NETZSCH Grinding & Dispersing | 多功能实验室碾磨机LabStar，适合有难度的学术工作研发任务，操作简便。碾磨结果，细度可达纳米级，可精确放大到生产大批量设备 |  |
| Laboratory De-Aerator Minivac | NETZSCH Grinding & Dispersing | 专门开发的仪器，用于小批量或首次测试，例如NETZSCH真空脱气器，根据VTR（真空薄膜轮换程序）原理工作。由于调整了储罐的位置，MiniVac操作简便。其它优势还包括易清洁和易维护 |  |
| MasterMill Basket Mill | NETZSCH Grinding & Dispersing | NETZSCH MasterMill是批量式篮式球磨机，用于超细碾磨，可采用移动和固定混合料斗。独特的系统包含独立的驱动器用于驱动碾磨篮里的碾磨工具，碾磨室里混合设备和传递产品设备的接地。MasterMill可装配各种形状的料斗，在生产中具有杰出的灵活性 |  |
| MasterMix® Dissolver | NETZSCH Grinding & Dispersing | MasterMix®溶解器用于将固体分散到液体中。产品在一个可交换的储罐中批量混合。通过频率控制驱动器，混合工具的速度无限可变，混合储罐里的工作高度可按需调整。容器管壁刮刀可选择性供应 |  |
| Max-Shear Inline Disperser | NETZSCH Grinding & Dispersing | 足够小巧，可装配在你工艺的任何位置。自泵送便携式单元的重要特征是转子/定子技术，多种定子结构可选。制备精确度极高，可消除其它单级分散器常出现的产品迂回的问题。杰出的高剪切性能和强力的泵送操作使Max-Shear可理想地适用于乳化和硬的到湿的材料的加工 |  |
| Micro Ψ-Mix® Laboratory Inline Disperser | NETZSCH Grinding & Dispersing | Micro Ψ-Mix®是已被广为证明的Ψ-Mix® Inline Disperser的实验室规模版本，设计用于试产和小批量。Micro Ψ-Mix®控制工艺可获得均一的细分散体，具有精确的品质可再现性 |  |
| Microseries | NETZSCH Grinding & Dispersing | 最佳湿碾磨技术-MicroSeries实验室碾磨机是对未来的投资，可用于各种领域的新产品开发，例如着色油墨喷墨、工业陶瓷、化妆品、药物以及纳米级高科技产品。精巧、通用的实验室循环碾磨机MicroSeries操作简便，容量从0.14到0.5l，可碾磨颗粒至纳米级 |  |
| Minimaster Laboratory Disperser | NETZSCH Grinding & Dispersing | NETZSCH Model 50实验室分散搅拌机（MiniMaster）通过高速分散和改进的电机性能可均一地进行可重复的分散操作。不论产品重量、粘度或其它变量如何，该高性能高速单元确保了恒定的混合速度。它可简便地循环剪切分散体和乳液，比其它实验室分散机更快地混合材料 |  |
| Miniseries | NETZSCH Grinding & Dispersing | 最佳湿碾磨技术-MicroSeries实验室碾磨机是对未来的投资，可用于各种领域的新产品开发，例如着色油墨喷墨、工业陶瓷、化妆品、药物以及纳米级高科技产品。精巧、通用的实验室循环碾磨机MicroSeries操作简便，容量从0.25到0.5l，可碾磨颗粒至纳米级 |  |
| Nanomill ZETA® RS | NETZSCH Grinding & Dispersing | NETZSCH的纳米碾磨机Zeta® RS是众所周知的Zeta® type LMZ循环碾磨系统的下一代。它的应用领域为其它搅拌珠磨机系统Zeta®无法达到的应用。高效离心分离体系可将可靠连续的操作中直径50 – 300 µm碾磨介质用量缩减到最低 |  |
| NETZSCH Agitator Bead Mill Alpha® | NETZSCH Grinding & Dispersing | NETZSCH-Feinmahltechnik GmbH研发了最新的搅拌珠磨机Alpha®。它是一个组合机床平台，其灵活性、易使用性和效率方面都成了行业的新标准。与上一代的机器相比，这个系列的设计使得不同类型的研磨系统可以被装在同一个具有符合需求的驱动容量的基础平台上：先进的圆盘研磨系统Discus，研磨介质分离效果进行了优化的Zeta®系统以及最新PEG系统Macro。 |  |
| NETZSCH Laboratory Dissolver Shearmaster | NETZSCH Grinding & Dispersing | ShearMaster实验室溶解器是一个高速混合机，用于小批量产品（1-10l) ，混合和分散操作高强度、省时间。它装有1.1 kW电动马达。ShearMaster的速度不可以无限调整，溶解器圆盘也不能无限上升或下降 |  |
| NETZSCH-Beadbox | NETZSCH Grinding & Dispersing | NETZSCH-BEADBOX是一个可让研磨机在无需开启研磨室的情况下，就能自动排空和灌装研磨珠的装置。该装置包含一个泵站，一个有关闭阀的存储器和与相应研磨机连接的管线。 |  |
| NETZSCH-Beads | NETZSCH Grinding & Dispersing | 合适的碾磨珠选择是搅拌珠磨机优化分散和湿碾磨工艺的杰出特性。NETZSCH的珠子可提供最佳的碾磨效果。若碾磨珠可理想地用于NETZSCH搅拌珠磨机，指定容量的设备的所有重要品质要求都准备好了，那么机器、碾磨介质和应用均达到了优化状态 |  |
| Omega® Economic Dispersionizer | NETZSCH Grinding & Dispersing | 只有点对点的分散力，才能将聚集粒子进行分散以形成优质的分散液。Omega®经济分散机产可以非常有效地在需要的地方产生分散力：在Omega®分散机中，能量在高压下转化成高速度。振动和气穴完美形成的剪力力可以确保最大的分散效果。另外，该系统可以很容易适应不同的操作条件或配方体系。 Omega®分散机具有可无限调整流量的喷嘴，最佳的适应性和增高的效率，不仅能减少生产过程中的能量消耗，从而减少热积蓄，同时与传统技术相比还具有更小的磨损。 |  |
| Ψ-MIX® Inline-Disperser | NETZSCH Grinding & Dispersing | Ψ-Mix®在线分散器，结合了新的分散方法，固体组分可被大型液体表面润湿，采取了无有害物、无尘排放的在线操作。即使温度敏感产品或具有剪切增稠性能的产品也可进行处理，没有任何问题 |  |
| PMD / PMD-VC Intensive Mixers | NETZSCH Grinding & Dispersing | PMD和PMD-VC加强搅拌器是一种固定式混合和分散单元，用于大批量加工。混合和分散操作的分离提供了一种极其省能源的工艺，尤其适合批量大于2000l。加强搅拌器精巧的附件设计使之可组装到全自动工厂中，防止气体和灰尘的污染 |  |
| Service Seminar | NETZSCH Grinding & Dispersing | 生产中如何优化搅拌珠磨机- 一个学习性的NETZSCH服务研讨会，目的是指导参会者如何机械地优化搅拌珠磨机，并改善整个工艺。如何降低操作成本和失败可能性，如何通过工艺优化并提高碾磨系统的能力。研讨会结束时讲解了一个演示文稿和对生产的建议 | |
| Vacuum De-Aerator DA/DA-VS | NETZSCH Grinding & Dispersing | NETZSCH的真空脱气器，从各种粘度的流体中脱除各种微量气体。采用VTR原理（真空-薄膜-转动工艺），可为胶印油墨和香波以及各种自由流动的化合物加工产品 |  |
