| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...展开 CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. 收起 | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...展开 CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. 收起 | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...展开 CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. 收起 | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...展开 CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. 收起 | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...展开 CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. 收起 | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...展开 CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. 收起 | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...展开 CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. 收起 | |
| ENOVA® Aerogel IC3100 | Cabot Corporation - Additives | ENOVA® Aerogel IC3100 is a thermal insulation additive featuring ultra-low thermal conductivity, extreme shear resistance, complete hydrophobicity, and a smooth, even finish. This product is well suited for use in thin-film, thermally-insulative coating a...展开 ENOVA® Aerogel IC3100 is a thermal insulation additive featuring ultra-low thermal conductivity, extreme shear resistance, complete hydrophobicity, and a smooth, even finish. This product is well suited for use in thin-film, thermally-insulative coating applications. 收起 | |
| ENOVA® Aerogel IC3110 | Cabot Corporation - Additives | ENOVA® Aerogel IC3110 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use i...展开 ENOVA® Aerogel IC3110 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use in thermally-insulative coating applications. 收起 | |
| ENOVA® Aerogel IC3120 | Cabot Corporation - Additives | ENOVA® Aerogel IC3120 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use i...展开 ENOVA® Aerogel IC3120 is a thermal insulation additive featuring ultra-low thermal conductivity, exceptional insulation performance unaffected by shear, complete hydrophobicity, and a broad particle size distribution. This product is well suited for use in thermally-insulative coating applications. 收起 | |
| ENOVA® Aerogel MT1100 | Cabot Corporation - Additives | ENOVA® Aerogel MT1100 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV...展开 ENOVA® Aerogel MT1100 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV-curable coating applications. 收起 | |
| ENOVA® Aerogel MT1200 | Cabot Corporation - Additives | ENOVA® Aerogel MT1200 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV...展开 ENOVA® Aerogel MT1200 is a hyprophobic silica that functions as a high performance matting additive. Featuring ultra-low gloss and viscosity build, resistance to settling, and good coating clarity, this product is well suited for use in high solids and UV-curable coating applications 收起 | |
| Fujicure 205-L | Sanho Chemical Co., Ltd. | Fujicure 205-L is a modified cycloaliphatic curing agent in a light honey-colored liquid form. This product has a viscosity of less than 400-700 mPa.s. Fujicure 205-L is most commonly used in solvent-free paint formulation applications. | |
| Fujicure 4030 | Sanho Chemical Co., Ltd. | Fujicure 4030 is a modified aromatic polyamine epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 66-70%. Fujicure 4030 is most commonly used in epoxy paint formulation applications. | |
| Fujicure 4200 | Sanho Chemical Co., Ltd. | Fujicure 4200 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 1700-2700 mPa.s. Fujicure 4200 is most commonly used in coating formulation applications. | |
| Fujicure 4233 | Sanho Chemical Co., Ltd. | Fujicure 4233 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 650-900 mPa.s and a specific gravity of 0.95. Fujicure 4233 is most commonly used in coating formulatio...展开 Fujicure 4233 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 650-900 mPa.s and a specific gravity of 0.95. Fujicure 4233 is most commonly used in coating formulation applications. 收起 | |
| Fujicure 5000 | Sanho Chemical Co., Ltd. | Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...展开 Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. 收起 | |
| Fujicure 5003 | Sanho Chemical Co., Ltd. | Fujicure 5003 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 3500-7500 mPa.s and a specific gravity of 1.08. Fujicure 5003 is most commonly used in coating formulation app...展开 Fujicure 5003 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 3500-7500 mPa.s and a specific gravity of 1.08. Fujicure 5003 is most commonly used in coating formulation applications. 收起 | |
| Fujicure 5300 | Sanho Chemical Co., Ltd. | Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...展开 Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. 收起 | |
| Fujicure 5420 | Sanho Chemical Co., Ltd. | Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...展开 Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Fujicure FX-220 | Sanho Chemical Co., Ltd. | Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...展开 Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. 收起 | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...展开 Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. 收起 | |
| Fujicure FXD-822 | Sanho Chemical Co., Ltd. | Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and m...展开 Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and mortar formulation applications. 收起 | |
| Fujicure FXK-832 | Sanho Chemical Co., Ltd. | Fujicure FXK-832 is a modified amine-type hardener in a light yellow-colored viscous liquid form. This product has a viscosity of 2000-5000 mPa.s and a specific gravity of 1.06. Fujicure FXK-832 is most commonly used in coating formulation applications. | |
| Fujicure FXM-823B | Sanho Chemical Co., Ltd. | Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in ...展开 Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in coal tar-epoxy coating applications. 收起 | |
| Fujicure FXM-824A | Sanho Chemical Co., Ltd. | Fujicure FXM-824A is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2500-3500 mPa.s and a specific gravity of 1.13. Fujicure FXM-824A is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824A is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2500-3500 mPa.s and a specific gravity of 1.13. Fujicure FXM-824A is most commonly used in tar and epoxy coating formulation applications. 收起 | |
| Fujicure FXM-824B | Sanho Chemical Co., Ltd. | Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coating formulation applications. 收起 | |
| Fujicure FXR-1020 | Sanho Chemical Co., Ltd. | Fujicure FXR-1020 is a latent-type curing agent and accelerator in a light yellow-colored powder form. This product has a viscosity of 1200-2500 mPa.s. Fujicure FXR-1020 is most commonly used in powder coating formulation applications. | |
| Fujicure FXR-1030 | Sanho Chemical Co., Ltd. | Fujicure FXR-1030 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.09. Fujicure FXR-1030 is most commonly used in powder coating formulation applications. | |
| Fujicure FXR-1081 | Sanho Chemical Co., Ltd. | Fujicure FXR-1081 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11. Fujicure FXR-1081 is most commonly used in powder coating formulation applications. | |
| Fujicure FXR-1090-FA | Sanho Chemical Co., Ltd. | Fujicure FXR-1090-FA is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11 and a softening point of 118°C. Fujicure FXR-1090-FA is most commonly used in powder coating formula...展开 Fujicure FXR-1090-FA is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11 and a softening point of 118°C. Fujicure FXR-1090-FA is most commonly used in powder coating formulation applications. 收起 | |
| H-Sperse® 2000A | Harcros Chemicals, Inc. | H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglome...展开 H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglomeration and flocculation of many types of inorganic particulate materials. It is APE/NPE free, and exhibits very low toxicity. The phosphate functional group promotes excellent adhesion to the inorganic particulate giving good dispersion stability under difficult conditions, such as highly saline solutions. The phosphate groups can also enhance fire retardancy. In addition, the phosphate groups can also enhance corrosion resistance in coatings applied to metals. 收起 | |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...展开 H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. 收起 | |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...展开 H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. 收起 | |
| H-Sperse® 4000N | Harcros Chemicals, Inc. | H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate lon...展开 H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate long term viscosity stability. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. Excellent color strength may be achieved by using H-Sperse® 4000N. 收起 | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...展开 H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Kingcure 100-BD | Sanho Chemical Co., Ltd. | Kingcure 100-BD is a modified aliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 3000-6000 mPa.s. Kingcure 100-BD is most commonly used in solvent-free coating formulation applications. | |
| Kingcure 2010 | Sanho Chemical Co., Ltd. | Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulati...展开 Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...展开 Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure 451-P | Sanho Chemical Co., Ltd. | Kingcure 451-P is a modified activated aromatic amine epoxy resin curing agent in a dark brown-colored liquid form. This product has a viscosity of 3000-8000 mPa.s and a specific gravity of 1.09. Kingcure 451-P is most commonly used in coating formulation...展开 Kingcure 451-P is a modified activated aromatic amine epoxy resin curing agent in a dark brown-colored liquid form. This product has a viscosity of 3000-8000 mPa.s and a specific gravity of 1.09. Kingcure 451-P is most commonly used in coating formulation applications. 收起 | |
| Kingcure 515-KD | Sanho Chemical Co., Ltd. | Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adh...展开 Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 613-B | Sanho Chemical Co., Ltd. | Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applicati...展开 Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 925 | Sanho Chemical Co., Ltd. | Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adh...展开 Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adhesive, and coating formulation applications. 收起 | |
| Kingcure A-611 | Sanho Chemical Co., Ltd. | Kingcure A-611 is a modified aliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 13-25 mPa.s and a specific gravity of 1.09. Kingcure A-611 is most commonly used in adhesive formulation applications. | |
| Kingcure B-311 | Sanho Chemical Co., Ltd. | Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applicat...展开 Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure B-312 | Sanho Chemical Co., Ltd. | Kingcure B-312 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 30 mPa.s. Kingcure B-312 is most commonly used in solvent-free coating and adhesive formulation applications. | |
| Kingcure D-211 | Sanho Chemical Co., Ltd. | Kingcure D-211 is a modified aliphatic polyamine epoxy curing agent in an amber-colored liquid form. This product has a viscosity of 50-150 mPa.s. Kingcure D-211 is most commonly used in coating and adhesive formulation applications. | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...展开 Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. 收起 | |
| Kingcure K-11 | Sanho Chemical Co., Ltd. | Kingcure K-11 is an accelerated aliphatic amine curing agent in an amber-colored liquid form. This product has a viscosity of 700-2400 mPa.s and a specific gravity of 1.04. Kingcure K-11 is most commonly used in adhesive formulation applications. | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...展开 Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure M-510 | Sanho Chemical Co., Ltd. | Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation appli...展开 Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation applications. 收起 | |
| Kingcure M-510BS | Sanho Chemical Co., Ltd. | Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation ap...展开 Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation applications. 收起 | |
| Kingcure M-530 | Sanho Chemical Co., Ltd. | Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applic...展开 Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applications. 收起 | |
| Kingcure N-768 | Sanho Chemical Co., Ltd. | Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation app...展开 Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation applications. 收起 | |
| Kingcure N-784 | Sanho Chemical Co., Ltd. | Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, l...展开 Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, laminate, and adhesive formulation applications. 收起 | |
| Kingcure T-642NA | Sanho Chemical Co., Ltd. | Kingcure T-642NA is a modified aliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 80 mPa.s. Kingcure T-642NA is most commonly used in coating and adhesive formulation applications. | |
| Kingcure X-165A | Sanho Chemical Co., Ltd. | Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulat...展开 Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure X-166K | Sanho Chemical Co., Ltd. | Kingcure X-166K is a low viscosity, modified aliphatic plyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 80-150 mPa.s and a specific gravity of 1.04. Kingcure X-166K is most commonly used in solvent-free co...展开 Kingcure X-166K is a low viscosity, modified aliphatic plyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 80-150 mPa.s and a specific gravity of 1.04. Kingcure X-166K is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...展开 Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure X-963 | Sanho Chemical Co., Ltd. | Kingcure X-963 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 100-200 mPa.s and a specific gravity of 1.10. Kingcure X-963 is most commonly used in coating formulation applications. | |
| Kingcure X-980W | Sanho Chemical Co., Ltd. | Kingcure X-980W is a waterborne, modified polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure X-980W is most commonly used in high-gloss coating...展开 Kingcure X-980W is a waterborne, modified polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure X-980W is most commonly used in high-gloss coating formulation applications. 收起 | |
| Kingcure XD-230I | Sanho Chemical Co., Ltd. | Kingcure XD-230I is a low viscosity, rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 150-250 mPa.s and a specific gravity of 1.11. Kingcure XD-230I is most commonly used in solvent-fre...展开 Kingcure XD-230I is a low viscosity, rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 150-250 mPa.s and a specific gravity of 1.11. Kingcure XD-230I is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingmide 150-50 | Sanho Chemical Co., Ltd. | Kingmide 150-50 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 150-50 is most commonly used in primer coating formulation applications. | |
| Kingmide 300-65 | Sanho Chemical Co., Ltd. | Kingmide 300-65 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 63-67%. Kingmide 300-65 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305 | Sanho Chemical Co., Ltd. | Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...展开 Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 305-31 | Sanho Chemical Co., Ltd. | Kingmide 305-31 is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-31MI | Sanho Chemical Co., Ltd. | Kingmide 305-31MI is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31MI is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-50 | Sanho Chemical Co., Ltd. | Kingmide 305-50 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 305-50 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-60 | Sanho Chemical Co., Ltd. | Kingmide 305-60 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 305-60 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-70 | Sanho Chemical Co., Ltd. | Kingmide 305-70 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-70X | Sanho Chemical Co., Ltd. | Kingmide 305-70X is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70X is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 315 | Sanho Chemical Co., Ltd. | Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formula...展开 Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formulation applications. 收起 | |
| Kingmide 315-80 | Sanho Chemical Co., Ltd. | Kingmide 315-80 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 78-82%. Kingmide 315-80 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 315-FC | Sanho Chemical Co., Ltd. | Kingmide 315-FC is a polyaminoamide-type curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 315-FC is most commonly used in adhesive formulation applications. | |
| Kingmide 315-FS | Sanho Chemical Co., Ltd. | Kingmide 315-FS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-15,000 mPa.s. Kingmide 315-FS is most commonly used in adhesive formulation applications. | |
| Kingmide 315-L | Sanho Chemical Co., Ltd. | Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and pu...展开 Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and putty formulation applications. 收起 | |
| Kingmide 326-A | Sanho Chemical Co., Ltd. | Kingmide 326-A is a polyaminoamide curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-16,000 mPa.s. Kingmide 326-A is most commonly used in adhesive formulation applications. | |
| Kingmide 328-A | Sanho Chemical Co., Ltd. | Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation application...展开 Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 334 | Sanho Chemical Co., Ltd. | Kingmide 334 is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s and a specific gravity of 0.96. Kingmide 334 is most commonly used in adhesive formulation applications. | |
| Kingmide 384-S | Sanho Chemical Co., Ltd. | Kingmide 384-S is a modified polyaminoamide epoxy adduct curing agent in a brown-colored viscous liquid form. This product has a viscosity of 7000-10,000 mPa.s. Kingmide 384-S is most commonly used in adhesive formulation applications. | |
| Kingmide 390-70 | Sanho Chemical Co., Ltd. | Kingmide 390-70 is a reactive polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 390-70 is most commonly used in corrosion resistant paint formulation applicat...展开 Kingmide 390-70 is a reactive polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 390-70 is most commonly used in corrosion resistant paint formulation applications. 收起 | |
| Kingmide 423-HPP | Sanho Chemical Co., Ltd. | Kingmide 423-HPP is a reactive modified polyamide type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 423-HPP is most commonly used in corrosion resistant paint formulation appl...展开 Kingmide 423-HPP is a reactive modified polyamide type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 423-HPP is most commonly used in corrosion resistant paint formulation applications. 收起 | |
| Kingmide 507-KS | Sanho Chemical Co., Ltd. | Kingmide 507-KS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 507-KS is most commonly used in adhesive formulation applications. | |
| Kingmide 513-F | Sanho Chemical Co., Ltd. | Kingmide 513-F is a poly amide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingmide 513-F is most commonly used in adhesive formulation applications. | |
| Kingmide 581-60 | Sanho Chemical Co., Ltd. | Kingmide 581-60 is a solvent-type modified polyaminoamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 581-60 is most commonly used in tar-epoxy coating and enamel formulation...展开 Kingmide 581-60 is a solvent-type modified polyaminoamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 581-60 is most commonly used in tar-epoxy coating and enamel formulation applications. 收起 | |
| Kingmide 701 | Sanho Chemical Co., Ltd. | Kingmide 701 is a modified aliphatic amidoamine curing agent in an amber liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.98. Kingmide 701 is most commonly used in adhesive formulation applications. | |
| Kingmide 710-SS | Sanho Chemical Co., Ltd. | Kingmide 710-SS is a modified aliphatic amidoamine curing agent. This product has a viscosity of 150-500 mPa.s and a specific gravity of 0.99. Kingmide 710-SS is most commonly used in mortar and adhesive formulation applications. | |
| Kingmide 74 | Sanho Chemical Co., Ltd. | Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation app...展开 Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation applications. 收起 | |
| Kingmide 74-KB | Sanho Chemical Co., Ltd. | Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive for...展开 Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive formulation applications. 收起 | |
| Kingmide 74-NP | Sanho Chemical Co., Ltd. | Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive form...展开 Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive formulation applications. 收起 | |
| Kingmide X-2700 | Sanho Chemical Co., Ltd. | Kingmide X-2700 is a solvent-type modified polyaminoamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide X-2700 is most commonly used in tar-epoxy coating and enamel formulation...展开 Kingmide X-2700 is a solvent-type modified polyaminoamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide X-2700 is most commonly used in tar-epoxy coating and enamel formulation applications. 收起 | |
| LUMIRA® Translucent Aerogel LA1000 | Cabot Corporation - Additives | LUMIRA® Translucent Aerogel LA1000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited fo...展开 LUMIRA® Translucent Aerogel LA1000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited for use in glass and polycarbonate daylighting systems. 收起 | |
| LUMIRA® Translucent Aerogel LA2000 | Cabot Corporation - Additives | LUMIRA® Translucent Aerogel LA2000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited fo...展开 LUMIRA® Translucent Aerogel LA2000 is a modified, synthetic, amorphous silica gel that functions as a high-performance thermal insulator. Featuring good hydrophobicity, UV stability, light transmission, and sound absorption, this product is well suited for use in glass and polycarbonate daylighting systems. 收起 | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. |
