| CRAYVALLAC® A-72-A2-60 | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-72-A2-60 is a high-performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-72-A2-60 is suitable for use in a wide range of solvent-based systems and applications. CRAYVALLAC® A-72-A2-60 ...展开 CRAYVALLAC® A-72-A2-60 is a high-performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-72-A2-60 is suitable for use in a wide range of solvent-based systems and applications. CRAYVALLAC® A-72-A2-60 has been developed specifically to enhance substrate wetting and to improved leveling. As a result, when compared with unactivated coating, film defects such as craters, fisheyes, orange peel, and pinholes are reduced and a superior overall appearance of the film is visible with no degradation of the exterior durability. 收起 | Request Sample |
| CRAYVALLAC® EF 30P | Arkema Rheology & Specialty Additives | CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALL...展开 CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALLAC® EF 30P with REAFREE 6489-TS, Carboxylated Polyester resin. The very good colour stability of formulations containing CRAYVALLAC® EF 30P as matting additive, enables the production of low gloss white and pale colour paints. CRAYVALLAC® EF 30P has been developed specifically to provide matting effect in powder coatings. 收起 | Request Sample |
| G-Modified Petroleum Resin (C5/C9) (G-100) | Shanghai Qilong Chemical Co., Ltd. | G-Modified Petroleum Resin (C5/C9) (G-100) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often ...展开 G-Modified Petroleum Resin (C5/C9) (G-100) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often used as an ink additive or binder for hot melt road marking paint and tackifier for hot melt adhesives. 收起 | |
| G-Modified Petroleum Resin (C5/C9) (G-110) | Shanghai Qilong Chemical Co., Ltd. | G-Modified Petroleum Resin (C5/C9) (G-110) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often ...展开 G-Modified Petroleum Resin (C5/C9) (G-110) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often used as an ink additive or binder for hot melt road marking paint and tackifier for hot melt adhesives. 收起 | |
| L-Modified Petroleum Resin (C9) (L-110) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-110) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展开 L-Modified Petroleum Resin (C9) (L-110) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-120) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-120) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展开 L-Modified Petroleum Resin (C9) (L-120) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-130) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-130) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展开 L-Modified Petroleum Resin (C9) (L-130) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-140) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-140) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展开 L-Modified Petroleum Resin (C9) (L-140) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-150) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-150) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展开 L-Modified Petroleum Resin (C9) (L-150) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| N-Modified Petroleum Resin (C9) (N-100) | Shanghai Qilong Chemical Co., Ltd. | N-Modified Petroleum Resin (C9) (N-100) is yellow green to dark brown beads or flakes made from thermal polymerization of C9, a by-product of ethylene plant. This product has good dissolubility, intersolubility, water resistance, and chemical stability to...展开 N-Modified Petroleum Resin (C9) (N-100) is yellow green to dark brown beads or flakes made from thermal polymerization of C9, a by-product of ethylene plant. This product has good dissolubility, intersolubility, water resistance, and chemical stability to acid and alkali in addition to good adhesion property and low heat conductivity. It can be used in paints with a softening point of 90-100°C. 收起 | |
| N-Modified Petroleum Resin (C9) (N-110) | Shanghai Qilong Chemical Co., Ltd. | N-Modified Petroleum Resin (C9) (N-110) is yellow green to dark brown beads or flakes made from thermal polymerization of C9, a by-product of ethylene plant. This product has good dissolubility, intersolubility, water resistance, and chemical stability to...展开 N-Modified Petroleum Resin (C9) (N-110) is yellow green to dark brown beads or flakes made from thermal polymerization of C9, a by-product of ethylene plant. This product has good dissolubility, intersolubility, water resistance, and chemical stability to acid and alkali in addition to good adhesion property and low heat conductivity. It can be used in paints with a softening point of 100-110°C. 收起 | |
| R-Modified Petroleum Resin (C9) (R-100) | Shanghai Qilong Chemical Co., Ltd. | R-Modified Petroleum Resin (C9) (R-100) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and ...展开 R-Modified Petroleum Resin (C9) (R-100) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and mutual solubility, water resistance, insulation, chemical stability over acid and alkali, adhesive strength, and low heat conduction. It can be used in synthetic hot melt adhesives with a softening point between 90-100°C. 收起 | |
| R-Modified Petroleum Resin (C9) (R-110) | Shanghai Qilong Chemical Co., Ltd. | R-Modified Petroleum Resin (C9) (R-110) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and ...展开 R-Modified Petroleum Resin (C9) (R-110) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and mutual solubility, water resistance, insulation, chemical stability over acid and alkali, adhesive strength, and low heat conduction. It can be used in synthetic hot melt adhesives with a softening point between 100-110°C. 收起 |
