| Chlorinated Polypropylene (CPP) | Anhui Elite Industrial Co., Ltd | Chlorinated Polypropylene (CPP) is a non-toxic, tasteless, fast dissolving white to yellow granular powder. This product provides adhesion to coatings, adhesives, and inks. Chlorinated Polypropylene (CPP) is also used for its weather, chemical, oil, ozone...展开 Chlorinated Polypropylene (CPP) is a non-toxic, tasteless, fast dissolving white to yellow granular powder. This product provides adhesion to coatings, adhesives, and inks. Chlorinated Polypropylene (CPP) is also used for its weather, chemical, oil, ozone, fire, and thermal aging resisting properties. This product is mainly used as an adhesive agent for printing ink and plastic ink. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobuty...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl I...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP15 provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, an...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Delaphos® 2 | Delaphos | Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. ...展开 Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2 is also effective in water based systems. 收起 | |
| Delaphos® 2M | Delaphos | Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...展开 Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2M is also effective in water based systems. 收起 | |
| Delaphos® 4 | Delaphos | Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...展开 Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 4 is also effective in water based systems. 收起 | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| Glass Beads / Glass Microspheres | Anhui Elite Industrial Co., Ltd | Glass Beads / Glass Microspheres are clean, apparent beads with no obvious impurities. This product has a reflection index between 1.5 and 1.61 and is composed of sodium lime glass. Glass Beads / Glass Microspheres are used to improve visibility for traf...展开 Glass Beads / Glass Microspheres are clean, apparent beads with no obvious impurities. This product has a reflection index between 1.5 and 1.61 and is composed of sodium lime glass. Glass Beads / Glass Microspheres are used to improve visibility for traffic marking paint. 收起 | |
| H-Sperse® 2000A | Harcros Chemicals, Inc. | H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglome...展开 H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglomeration and flocculation of many types of inorganic particulate materials. It is APE/NPE free, and exhibits very low toxicity. The phosphate functional group promotes excellent adhesion to the inorganic particulate giving good dispersion stability under difficult conditions, such as highly saline solutions. The phosphate groups can also enhance fire retardancy. In addition, the phosphate groups can also enhance corrosion resistance in coatings applied to metals. 收起 | |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...展开 H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. 收起 | |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...展开 H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. 收起 | |
| H-Sperse® 4000N | Harcros Chemicals, Inc. | H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate lon...展开 H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate long term viscosity stability. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. Excellent color strength may be achieved by using H-Sperse® 4000N. 收起 | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...展开 H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. 收起 | |
| Harcryl® 1228 | Harcros Chemicals, Inc. | Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer system...展开 Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization. The phosphate functional group promotesadhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 to easily incorporate into many coating systems. 收起 | |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorpor...展开 Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. 收起 | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...展开 Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. 收起 | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...展开 Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Hollow Glass Microspheres T20 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T20 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.20 g/cm3. Hollow Glass Microspheres T20 improves flow properties and adj...展开 Hollow Glass Microspheres T20 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.20 g/cm3. Hollow Glass Microspheres T20 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T25 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T25 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.25 g/cm3. Hollow Glass Microspheres T25 improves flow properties and adj...展开 Hollow Glass Microspheres T25 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.25 g/cm3. Hollow Glass Microspheres T25 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T32 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T32 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.32 g/cm3. Hollow Glass Microspheres T32 improves flow properties and adj...展开 Hollow Glass Microspheres T32 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.32 g/cm3. Hollow Glass Microspheres T32 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T40 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T40 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.40 g/cm3. Hollow Glass Microspheres T40 improves flow properties and adj...展开 Hollow Glass Microspheres T40 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.40 g/cm3. Hollow Glass Microspheres T40 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T46 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T46 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.46 g/cm3. Hollow Glass Microspheres T46 improves flow properties and adj...展开 Hollow Glass Microspheres T46 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.46 g/cm3. Hollow Glass Microspheres T46 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T60 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T60 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.60 g/cm3. Hollow Glass Microspheres T60 improves flow properties and adj...展开 Hollow Glass Microspheres T60 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.60 g/cm3. Hollow Glass Microspheres T60 improves flow properties and adjusts the density of paint. 收起 | |
| Polyamide Resin | Anhui Elite Industrial Co., Ltd | Polyamide Resin is a kind of alcohol solvent polyamide resin, which has marvelous solvent liberation extremely good alcohol solubility, good compatibility with NC , superior freezing, water and gel resistance, good gloss, fluidity and pigment wetting prop...展开 Polyamide Resin is a kind of alcohol solvent polyamide resin, which has marvelous solvent liberation extremely good alcohol solubility, good compatibility with NC , superior freezing, water and gel resistance, good gloss, fluidity and pigment wetting property. It has applications in various gravure plastic printing ink, plastic flexibility issue printing, overprinting varnish and heat seal coating and heating seal beaded paint. 收起 | |
| Polyketone Resin | Anhui Elite Industrial Co., Ltd | Polyketone Resin is a non-toxic and light-cloured, hard resin with high photo-stability. This product is soluble in any solvent used in the coating industry with the exception of fatty alkane and water, and it may also be mixed and solved with many resin...展开 Polyketone Resin is a non-toxic and light-cloured, hard resin with high photo-stability. This product is soluble in any solvent used in the coating industry with the exception of fatty alkane and water, and it may also be mixed and solved with many resins used in paint and inks. Polyketon Resin provides glossiness, adhesion, wettabillity, and hardness to paints, coatings, and inks. 收起 | |
| Silane Coupling Agent 150 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent 150 is a colorless to light yellow liquid which is soluble in most organic solvents. This product has a boiling point of 90.6 degrees Celsius and a density of 1.265 g/cm3. Silane Coupling Agent 150 acts as a surface treatment agent i...展开 Silane Coupling Agent 150 is a colorless to light yellow liquid which is soluble in most organic solvents. This product has a boiling point of 90.6 degrees Celsius and a density of 1.265 g/cm3. Silane Coupling Agent 150 acts as a surface treatment agent in glass fiber and reinforced plastics. 收起 | |
| Silane Coupling Agent ELT-S 341 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 341 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.8790 g/cm3 and a refractive index of 1.417 n25D. Silane Coupling Agent ELT-S 341 acts as a surface modifier which generate...展开 Silane Coupling Agent ELT-S 341 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.8790 g/cm3 and a refractive index of 1.417 n25D. Silane Coupling Agent ELT-S 341 acts as a surface modifier which generates hydrophobicity to concrete, glass, inorganic pigments, or mineral fillers. 收起 | |
| Silane Coupling Agent ELT-S 550 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 551 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 602 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起 | |
| Silane Coupling Agent ELT-S 672 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 672 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.9070 g/cm3 and a refractive index of 1.4160 n25D. Silane Coupling Agent ELT-S 672 acts as a surface modifier which provide...展开 Silane Coupling Agent ELT-S 672 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.9070 g/cm3 and a refractive index of 1.4160 n25D. Silane Coupling Agent ELT-S 672 acts as a surface modifier which provides hydrophobicity to concrete, glass, inorganic pigments, or mineral fillers. 收起 | |
| Silane Coupling Agent ELT-S 792 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起 | |
| Silane Coupling Agent ELT-TEOS | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-TEOS is a neutral, colorless, transparent liquid which can be hydrolyzed in water. This product ha a molecular weight of 208.33 and a density of between 0.93 and 0.95 g/cm3. Silane Coupling Agent ELT-TEOS is used as an adhesive i...展开 Silane Coupling Agent ELT-TEOS is a neutral, colorless, transparent liquid which can be hydrolyzed in water. This product ha a molecular weight of 208.33 and a density of between 0.93 and 0.95 g/cm3. Silane Coupling Agent ELT-TEOS is used as an adhesive in paints and coatings. 收起 | |
| SILZOT® FS-X1 | AlzChem AG | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...展开 SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. 收起 | |
| Silzot® HQ plus (Powder) | AlzChem AG | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® HQ (Powder) | AlzChem AG | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| SILZOT® RTP | AlzChem AG | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
| Silzot® SQ | AlzChem AG | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
| Silzot® TQ (Powder) | AlzChem AG | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| SLK-DF100FT | Jiande Silicone Import & Export Co., Ltd. | SLK-DF100FT is a clear liquid, 100% active fluorosilicone polymer coating auxiliary agent, providing persistent antifoam, chemical and oxidation resistance and low surface tension. It is suitable for foam control in solvent systems where conventional pol...展开 SLK-DF100FT is a clear liquid, 100% active fluorosilicone polymer coating auxiliary agent, providing persistent antifoam, chemical and oxidation resistance and low surface tension. It is suitable for foam control in solvent systems where conventional polydimethylsiloxane fluids are soluble and promote foam. 收起 | |
| SLK-DF303 | Jiande Silicone Import & Export Co., Ltd. | SLK-DF303 is a white emulsion composed of an organic silicone polymer. It exhibits good foam breaking and inhibiting and dispersing properties in water-based coating systems. | |
| SLK-DF304 | Jiande Silicone Import & Export Co., Ltd. | SLK-DF304 is a milky-white liquid, organic silicone polymer. It exhibits good defoaming and foam inhibiting as well as dispersing properties in water-based coating systems. | |
| SLK-DF50FT | Jiande Silicone Import & Export Co., Ltd. | SLK-DF50FT is a clear liquid, 100% active fluorosilicone polymer used in solvent based ink and coating systems. It can provide foam control, leveling and wetting in acrylic, alkyd, amide, epoxy, nitrocellulose, polyesters, polyurethane and vinyl based sys...展开 SLK-DF50FT is a clear liquid, 100% active fluorosilicone polymer used in solvent based ink and coating systems. It can provide foam control, leveling and wetting in acrylic, alkyd, amide, epoxy, nitrocellulose, polyesters, polyurethane and vinyl based systems. 收起 | |
| SLK-LA252 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA252 is a clear liquid aralkyl-modified polymethylalkylsiloxane used as a surface additive for solvent-borne coating systems. It creates a slight reduction of surface tension and a slight increase of surface slip. It is thermostable up to 250° C (482...展开 SLK-LA252 is a clear liquid aralkyl-modified polymethylalkylsiloxane used as a surface additive for solvent-borne coating systems. It creates a slight reduction of surface tension and a slight increase of surface slip. It is thermostable up to 250° C (482° F) while providing good leveling and defoaming properties. It can be used in protective and marine coatings, architectural coatings, coil coatings and wood and furniture coatings. 收起 | |
| SLK-LA3032 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3032 is a clear, amber colored, liquid polyether-modified polydimethylsiloxane used as a silicone surface additive for paints and coatings. It provides good substrate wetting of critical substrates and good anti-crater performance by reduction of su...展开 SLK-LA3032 is a clear, amber colored, liquid polyether-modified polydimethylsiloxane used as a silicone surface additive for paints and coatings. It provides good substrate wetting of critical substrates and good anti-crater performance by reduction of surface tension. It can also increase surface slip, while improving scratch resistance and anti-blocking. 收起 | |
| SLK-LA3033 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3033 is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which provid...展开 SLK-LA3033 is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which provides good substrate wetting even of critical substrates. It also increases anti-crater performance and surface slip by reduction of surface tension. In addition, it improves gloss, scratch resistance and anti-blocking. It is suitable for use in applications ranging from protective coatings in marine, architectural and automotive OEM coatings to automotive refinish, industrial and wood and furniture coatings. 收起 | |
| SLK-LA3033-6# | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3033-6# is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which pro...展开 SLK-LA3033-6# is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which provides good substrate wetting even of critical substrates. It also increases anti-crater performance and surface slip by reduction of surface tension. In addition, it improves gloss, scratch resistance and anti-blocking. It is suitable for use in applications ranging from protective coatings in marine, architectural and automotive OEM coatings to automotive refinish, industrial and wood and furniture coatings. 收起 | |
| SLK-LA3035 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3035 is a clear liquid polyether-modified polydimethylsiloxane that provides anti-crater and scratch resistance properties in paints, inks and coatings. It also contributes to good slip, substrate wetting and anti-blocking. It can be used in water-b...展开 SLK-LA3035 is a clear liquid polyether-modified polydimethylsiloxane that provides anti-crater and scratch resistance properties in paints, inks and coatings. It also contributes to good slip, substrate wetting and anti-blocking. It can be used in water-borne and radiation curing applications and is suitable for solvent-borne, clear coat and pigmented applications 收起 | |
| SLK-LA3307X | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3307X is an amber-colored, clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free and solvent-borne coating systems, printing inks and adhesive systems. It provides good substrate wetting, prevents cratering...展开 SLK-LA3307X is an amber-colored, clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free and solvent-borne coating systems, printing inks and adhesive systems. It provides good substrate wetting, prevents cratering, and increases surface slip. It is suitable for solvent-free applications, or applications where a solvent already exists. It can be used in protective and marine coatings, architectural coatings and wood and furniture coatings. 收起 | |
| SLK-LA3308 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3308 is a clear liquid polyether-modified polydimethylsiloxane used to reduce surface tension and improve substrate wetting. It provides improved thermal stability, leveling and gloss. It is suitable for use in pigmented, clear coat, solvent-based, ...展开 SLK-LA3308 is a clear liquid polyether-modified polydimethylsiloxane used to reduce surface tension and improve substrate wetting. It provides improved thermal stability, leveling and gloss. It is suitable for use in pigmented, clear coat, solvent-based, solvent-free and aqueous coatings. 收起 | |
| SLK-LA3450X | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3450X is a clear liquid polyether-modified polydimethylsiloxane that provides anti-crater and scratch resistance properties in coatings. It also contributes to good slip, substrate wetting and anti-blocking. It can be used in water-borne and radiati...展开 SLK-LA3450X is a clear liquid polyether-modified polydimethylsiloxane that provides anti-crater and scratch resistance properties in coatings. It also contributes to good slip, substrate wetting and anti-blocking. It can be used in water-borne and radiation curing applications and is suitable for solvent-borne, clear coat and pigmented applications. 收起 | |
| SLK-WA3071 | Jiande Silicone Import & Export Co., Ltd. | SLK-WA3071 is a clear liquid, composed of trisiloxane and polyether-modified polydimethylsiloxane, used for improving substrate wetting for water-borne coatings and allowing easier application on difficult substrates. It also acts as a flow and leveling m...展开 SLK-WA3071 is a clear liquid, composed of trisiloxane and polyether-modified polydimethylsiloxane, used for improving substrate wetting for water-borne coatings and allowing easier application on difficult substrates. It also acts as a flow and leveling modifier for paints, inks and coatings. It is dispersable in water, creating a lower surface tension for use in water reducible flexographic and rotographic inks. 收起 | |
| SLK-WA3072 | Jiande Silicone Import & Export Co., Ltd. | SLK-WA3072 is a clear liquid comprised of trisiloxane and polyether modified polydimethylsiloxane. It improves the wetting of water-borne coatings, allowing easier application on difficult substrates. It also acts as a flow and leveling modifier for pain...展开 SLK-WA3072 is a clear liquid comprised of trisiloxane and polyether modified polydimethylsiloxane. It improves the wetting of water-borne coatings, allowing easier application on difficult substrates. It also acts as a flow and leveling modifier for paints, inks and coatings. It is dispersable in water, creating a lower surface tension for use in water reducible flexographic and rotographic inks. 收起 | |
| Solid Acrylic Resin ELT-66 | Anhui Elite Industrial Co., Ltd | Solid Acrylic Resin ELT-66 is a white granular which is soluble in ester, ketone, aromatics, gasoline, and alcohol. This product has a viscosity between 2300 and 4300 and is also compatible with CAB. Solid Acrylic Resin ELT-66 provides gloss, hardness, we...展开 Solid Acrylic Resin ELT-66 is a white granular which is soluble in ester, ketone, aromatics, gasoline, and alcohol. This product has a viscosity between 2300 and 4300 and is also compatible with CAB. Solid Acrylic Resin ELT-66 provides gloss, hardness, weather and chemical resistance, leveling, and pigment dispersion to paint and inks. 收起 | |
| Solid Acrylic Resin ELT-725 | Anhui Elite Industrial Co., Ltd | Solid Acrylic Resin ELT-725 is a white granular which is ester, ketone, and aromatic soluble. This product has a viscosity between 300 and 400 and is compatible with CAB, NC, and other resins. This product provides adhesion, hardness, yellowing, and weath...展开 Solid Acrylic Resin ELT-725 is a white granular which is ester, ketone, and aromatic soluble. This product has a viscosity between 300 and 400 and is compatible with CAB, NC, and other resins. This product provides adhesion, hardness, yellowing, and weather resistance to paint and inks. Solid Acrylic Resin ELT-725 is compatible with CAB, NC, and other resins. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-01 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-01 is a white granular which is soluble in ester, ketone, aromatics, and alcohol ethers. This product has a viscosity between 250-450 and is also compatible with chlorinated rubber and provides resistance to chemicals,...展开 Thermoplastic Solid Acrylic Resin AR-01 is a white granular which is soluble in ester, ketone, aromatics, and alcohol ethers. This product has a viscosity between 250-450 and is also compatible with chlorinated rubber and provides resistance to chemicals, water, and abrasions. Thermoplastic Solid Acrylic Resin AR-01 provides adhesion, flexibility, dispersivity, and leveling to exterior coatings and fire retardant coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-01B | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-01B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-01B ...展开 Thermoplastic Solid Acrylic Resin AR-01B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-01B provides adhesion, flexibility, dispersivity, leveling, and compatibility to industrial coating, floor coating and machinery enamel. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-02 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-02 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-02 pro...展开 Thermoplastic Solid Acrylic Resin AR-02 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-02 provides adhesion, flexibility, dispersivity, leveling, and compatibility to road marking and floor coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-04 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-04 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-04 pro...展开 Thermoplastic Solid Acrylic Resin AR-04 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-04 provides adhesion, flexibility, dispersivity, leveling, and compatibility to anti-corrosive and fire retardant coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-05 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-05 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 300-500 and also provides chemical, water, and alcohol resistance. AR-05 pro...展开 Thermoplastic Solid Acrylic Resin AR-05 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 300-500 and also provides chemical, water, and alcohol resistance. AR-05 provides adhesion, flexibility, dispersivity, leveling, and compatibility to anti-corrosive and industrial coatings. 收起 |
