| 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) | ChemFine International Co., Ltd. | 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive. | |
| BIT | ChemFine International Co., Ltd. | BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...展开 BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. 收起 | |
| Delaphos® 2 | Delaphos | Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. ...展开 Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2 is also effective in water based systems. 收起 | |
| Delaphos® 2M | Delaphos | Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...展开 Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2M is also effective in water based systems. 收起 | |
| Delaphos® 4 | Delaphos | Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...展开 Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 4 is also effective in water based systems. 收起 | |
| H-Sperse® 2000A | Harcros Chemicals, Inc. | H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglome...展开 H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglomeration and flocculation of many types of inorganic particulate materials. It is APE/NPE free, and exhibits very low toxicity. The phosphate functional group promotes excellent adhesion to the inorganic particulate giving good dispersion stability under difficult conditions, such as highly saline solutions. The phosphate groups can also enhance fire retardancy. In addition, the phosphate groups can also enhance corrosion resistance in coatings applied to metals. 收起 | |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...展开 H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. 收起 | |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...展开 H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. 收起 | |
| H-Sperse® 4000N | Harcros Chemicals, Inc. | H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate lon...展开 H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate long term viscosity stability. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. Excellent color strength may be achieved by using H-Sperse® 4000N. 收起 | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...展开 H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. 收起 | |
| Harcryl® 1228 | Harcros Chemicals, Inc. | Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer system...展开 Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization. The phosphate functional group promotesadhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 to easily incorporate into many coating systems. 收起 | |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorpor...展开 Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. 收起 | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...展开 Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. 收起 | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...展开 Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Hycure 1173 | ChemFine International Co., Ltd. | Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time. | |
| Hycure 184 | ChemFine International Co., Ltd. | Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time. | |
| Hycure 907 | ChemFine International Co., Ltd. | Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time. | |
| Hycure BDK | ChemFine International Co., Ltd. | Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink. | |
| Hycure Benzil | ChemFine International Co., Ltd. | Hycure Benzil, also known as Bibenzoyl, is a photoinitiator used as the raw material for certain medicines, an intermediary for organic synthesis, is an ultraviolet hardening agent and a pesticide. | |
| Hycure Benzoin | ChemFine International Co., Ltd. | Hycure Benzoin, also known as 2-diphenyl ethanone, is used as a photoinitiator in regards to photo-curable coatings also as an antiseptic in the pharmaceutical industry. | |
| Hycure Benzophenone | ChemFine International Co., Ltd. | Hycure Benzophenone is an ultraviolet radiation absorber and intermediate for organic pigments. | |
| Hycure ITX | ChemFine International Co., Ltd. | Hycure ITX, also known as Isopropyl thioxanthone, has applications in color or transparent UV-photocurable ink, binder, and paint. | |
| JLS-APP | ChemFine International Co., Ltd. | JLS-APP, also known as ammonium polyphosphate, is used in intumescent flame retardant coating, as well as polyurethane foam and cellulose. | |
| OIT | ChemFine International Co., Ltd. | OIT, also known as 2-Octyl-4-Isothiazolin-3-Ketone, is a low toxic and highly effective broad spectrum antiseptic that is mainly used to control mildew. This product is also applicable in polymer emulsions, adhesives, sealants, and paint. | |
| SLK-DF100FT | Jiande Silicone Import & Export Co., Ltd. | SLK-DF100FT is a clear liquid, 100% active fluorosilicone polymer coating auxiliary agent, providing persistent antifoam, chemical and oxidation resistance and low surface tension. It is suitable for foam control in solvent systems where conventional pol...展开 SLK-DF100FT is a clear liquid, 100% active fluorosilicone polymer coating auxiliary agent, providing persistent antifoam, chemical and oxidation resistance and low surface tension. It is suitable for foam control in solvent systems where conventional polydimethylsiloxane fluids are soluble and promote foam. 收起 | |
| SLK-DF303 | Jiande Silicone Import & Export Co., Ltd. | SLK-DF303 is a white emulsion composed of an organic silicone polymer. It exhibits good foam breaking and inhibiting and dispersing properties in water-based coating systems. | |
| SLK-DF304 | Jiande Silicone Import & Export Co., Ltd. | SLK-DF304 is a milky-white liquid, organic silicone polymer. It exhibits good defoaming and foam inhibiting as well as dispersing properties in water-based coating systems. | |
| SLK-DF50FT | Jiande Silicone Import & Export Co., Ltd. | SLK-DF50FT is a clear liquid, 100% active fluorosilicone polymer used in solvent based ink and coating systems. It can provide foam control, leveling and wetting in acrylic, alkyd, amide, epoxy, nitrocellulose, polyesters, polyurethane and vinyl based sys...展开 SLK-DF50FT is a clear liquid, 100% active fluorosilicone polymer used in solvent based ink and coating systems. It can provide foam control, leveling and wetting in acrylic, alkyd, amide, epoxy, nitrocellulose, polyesters, polyurethane and vinyl based systems. 收起 | |
| SLK-LA252 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA252 is a clear liquid aralkyl-modified polymethylalkylsiloxane used as a surface additive for solvent-borne coating systems. It creates a slight reduction of surface tension and a slight increase of surface slip. It is thermostable up to 250° C (482...展开 SLK-LA252 is a clear liquid aralkyl-modified polymethylalkylsiloxane used as a surface additive for solvent-borne coating systems. It creates a slight reduction of surface tension and a slight increase of surface slip. It is thermostable up to 250° C (482° F) while providing good leveling and defoaming properties. It can be used in protective and marine coatings, architectural coatings, coil coatings and wood and furniture coatings. 收起 | |
| SLK-LA3032 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3032 is a clear, amber colored, liquid polyether-modified polydimethylsiloxane used as a silicone surface additive for paints and coatings. It provides good substrate wetting of critical substrates and good anti-crater performance by reduction of su...展开 SLK-LA3032 is a clear, amber colored, liquid polyether-modified polydimethylsiloxane used as a silicone surface additive for paints and coatings. It provides good substrate wetting of critical substrates and good anti-crater performance by reduction of surface tension. It can also increase surface slip, while improving scratch resistance and anti-blocking. 收起 | |
| SLK-LA3033 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3033 is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which provid...展开 SLK-LA3033 is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which provides good substrate wetting even of critical substrates. It also increases anti-crater performance and surface slip by reduction of surface tension. In addition, it improves gloss, scratch resistance and anti-blocking. It is suitable for use in applications ranging from protective coatings in marine, architectural and automotive OEM coatings to automotive refinish, industrial and wood and furniture coatings. 收起 | |
| SLK-LA3033-6# | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3033-6# is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which pro...展开 SLK-LA3033-6# is a clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free, solvent-borne and aqueous coating systems, printing inks and adhesive systems. It provides a strong reduction of surface tension which provides good substrate wetting even of critical substrates. It also increases anti-crater performance and surface slip by reduction of surface tension. In addition, it improves gloss, scratch resistance and anti-blocking. It is suitable for use in applications ranging from protective coatings in marine, architectural and automotive OEM coatings to automotive refinish, industrial and wood and furniture coatings. 收起 | |
| SLK-LA3035 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3035 is a clear liquid polyether-modified polydimethylsiloxane that provides anti-crater and scratch resistance properties in paints, inks and coatings. It also contributes to good slip, substrate wetting and anti-blocking. It can be used in water-b...展开 SLK-LA3035 is a clear liquid polyether-modified polydimethylsiloxane that provides anti-crater and scratch resistance properties in paints, inks and coatings. It also contributes to good slip, substrate wetting and anti-blocking. It can be used in water-borne and radiation curing applications and is suitable for solvent-borne, clear coat and pigmented applications 收起 | |
| SLK-LA3307X | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3307X is an amber-colored, clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free and solvent-borne coating systems, printing inks and adhesive systems. It provides good substrate wetting, prevents cratering...展开 SLK-LA3307X is an amber-colored, clear liquid polyether-modified polydimethylsiloxane used as a surface additive for solvent-free and solvent-borne coating systems, printing inks and adhesive systems. It provides good substrate wetting, prevents cratering, and increases surface slip. It is suitable for solvent-free applications, or applications where a solvent already exists. It can be used in protective and marine coatings, architectural coatings and wood and furniture coatings. 收起 | |
| SLK-LA3308 | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3308 is a clear liquid polyether-modified polydimethylsiloxane used to reduce surface tension and improve substrate wetting. It provides improved thermal stability, leveling and gloss. It is suitable for use in pigmented, clear coat, solvent-based, ...展开 SLK-LA3308 is a clear liquid polyether-modified polydimethylsiloxane used to reduce surface tension and improve substrate wetting. It provides improved thermal stability, leveling and gloss. It is suitable for use in pigmented, clear coat, solvent-based, solvent-free and aqueous coatings. 收起 | |
| SLK-LA3450X | Jiande Silicone Import & Export Co., Ltd. | SLK-LA3450X is a clear liquid polyether-modified polydimethylsiloxane that provides anti-crater and scratch resistance properties in coatings. It also contributes to good slip, substrate wetting and anti-blocking. It can be used in water-borne and radiati...展开 SLK-LA3450X is a clear liquid polyether-modified polydimethylsiloxane that provides anti-crater and scratch resistance properties in coatings. It also contributes to good slip, substrate wetting and anti-blocking. It can be used in water-borne and radiation curing applications and is suitable for solvent-borne, clear coat and pigmented applications. 收起 | |
| SLK-WA3071 | Jiande Silicone Import & Export Co., Ltd. | SLK-WA3071 is a clear liquid, composed of trisiloxane and polyether-modified polydimethylsiloxane, used for improving substrate wetting for water-borne coatings and allowing easier application on difficult substrates. It also acts as a flow and leveling m...展开 SLK-WA3071 is a clear liquid, composed of trisiloxane and polyether-modified polydimethylsiloxane, used for improving substrate wetting for water-borne coatings and allowing easier application on difficult substrates. It also acts as a flow and leveling modifier for paints, inks and coatings. It is dispersable in water, creating a lower surface tension for use in water reducible flexographic and rotographic inks. 收起 | |
| SLK-WA3072 | Jiande Silicone Import & Export Co., Ltd. | SLK-WA3072 is a clear liquid comprised of trisiloxane and polyether modified polydimethylsiloxane. It improves the wetting of water-borne coatings, allowing easier application on difficult substrates. It also acts as a flow and leveling modifier for pain...展开 SLK-WA3072 is a clear liquid comprised of trisiloxane and polyether modified polydimethylsiloxane. It improves the wetting of water-borne coatings, allowing easier application on difficult substrates. It also acts as a flow and leveling modifier for paints, inks and coatings. It is dispersable in water, creating a lower surface tension for use in water reducible flexographic and rotographic inks. 收起 | |
| TGIC | ChemFine International Co., Ltd. | TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheeting...展开 TGIC, also known as Tris(2,3-Epoxyproryl)Isocyanurate, is used primarily as a curing agent for polyester powder coatings. This product also has applications in the manufacture of electrical insulation materials, printed circuits, tools, laminated sheetings, adhesives, and more. 收起 | |
| THEIC | ChemFine International Co., Ltd. | THEIC, also known as Tris (2-Hydroxyethyl) Isocyanurate, has applications in modified polyimide insulating varnish, paint for the base plate of automobiles, the manufacture of high-quality heat-resisting alcohol acid and plasticizer, and in the printing, ...展开 THEIC, also known as Tris (2-Hydroxyethyl) Isocyanurate, has applications in modified polyimide insulating varnish, paint for the base plate of automobiles, the manufacture of high-quality heat-resisting alcohol acid and plasticizer, and in the printing, textile, plastics, and photo industries. 收起 | |
| Venadol™ 104 | Harcros Chemicals, Inc. | Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol...展开 Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104 PG50 | Harcros Chemicals, Inc. | Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various...展开 Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 PG50 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104BC | Harcros Chemicals, Inc. | Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...展开 Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104BC to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104DPM | Harcros Chemicals, Inc. | Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilizati...展开 Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104DPM to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104E | Harcros Chemicals, Inc. | Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...展开 Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104E to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104H | Harcros Chemicals, Inc. | Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...展开 Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104H to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104PA | Harcros Chemicals, Inc. | Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various pro...展开 Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104PA to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 20 | Harcros Chemicals, Inc. | Venadol™ 20 is an effective wetting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubri...展开 Venadol™ 20 is an effective wetting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ 40 | Harcros Chemicals, Inc. | Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be util...展开 Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ 65 | Harcros Chemicals, Inc. | Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is...展开 Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ 85 | Harcros Chemicals, Inc. | Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is ...展开 Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ DF 110 L | Harcros Chemicals, Inc. | Venadol™ DF 110 L is a high performance, nonionic, molecular defoamer and deaerator. Venadol DF 110 L excels where effective defoaming or de-airentraining and foam elimination/prevention is necessary without causing surface defects. |
