| A121 | Sino-American Pigment Systems, Inc. | A121, in the form of a white powder, is an anatase titanium dioxide pigment. This product can be used in printing inks, interior paints, paper coatings, and ceramics. It offers whiteness, dispersibility, and good hiding power. | |
| Barium Metaborate | Sino-American Pigment Systems, Inc. | Barium Metaborate, in the form of a white crystalline powder, is a non-toxic anti-corrosive pigment. This product can be used in solvent-borne or water-based coatings. In addition, it is resistant to powdering, mildew, stain, and fire. This product con...展开 Barium Metaborate, in the form of a white crystalline powder, is a non-toxic anti-corrosive pigment. This product can be used in solvent-borne or water-based coatings. In addition, it is resistant to powdering, mildew, stain, and fire. This product contains at most 1% moisture. 收起 | |
| Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 μm | Sino-American Pigment Systems, Inc. | Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It off...展开 Blanc Fixe, Ultra Fine Grade, 180-P, 0.4 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 μm | Sino-American Pigment Systems, Inc. | Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It off...展开 Blanc Fixe, Ultra Fine Grade, 180-P, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| Blanc Fixe, Ultra Fine Grade, 198-BT, 0.4 μm | Sino-American Pigment Systems, Inc. | Blanc Fixe, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It of...展开 Blanc Fixe, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm | Sino-American Pigment Systems, Inc. | BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It of...展开 BLANC FIXE, Ultra Fine Grade, 198-BT, 0.7 μm, in the form of a white powder, is a precipitated barium sulfate. This product can be used as an extender in coating applications where the primary requirements are fineness and a high filling capacity. It offers UV light resistance, acid resistance, and alkali resistance, with increased whiteness and a high degree of brightness. 收起 | |
| CI Pigment Orange 20 (77202) | James M. Brown Ltd. | CI Pigment Orange 20 (77202) is a pigment based on a cadmium sulphoselenide system. This product is most commonly used as an orange coloring in artists' color and ceramic coating applications. | |
| CI Pigment Red 108 (77202) | James M. Brown Ltd. | CI Pigment Red 108 (77202) is a pigment based on a cadmium sulphoselenide system. This product is most commonly used as a red coloring in artists' color and ceramic coating applications. | |
| CI Pigment White 21 (77120) | James M. Brown Ltd. | CI Pigment White 21 (77120) is a pigment based on a solid solution of cadmium zinc sulphide. This product is most commonly used as a white coloring in artists' color and ceramic coating applications. | |
| CI Pigment Yellow 35 (77205) | James M. Brown Ltd. | CI Pigment Yellow 35 (77205) is a pigment based on a solid solution of cadmium zinc sulphide. This product is most commonly used as a yellow coloring in artists' color and ceramic coating applications. | |
| EME1900 | Sino-American Pigment Systems, Inc. | EME1900, in the form of a clear liquid, is a monoglycidyl ether of C12-C14 aliphatic alcohol. This product can be used in adhesives, flooring, potting and encapsulation applications. It is commonly used as a reactive diluent for high-viscosity epoxy res...展开 EME1900, in the form of a clear liquid, is a monoglycidyl ether of C12-C14 aliphatic alcohol. This product can be used in adhesives, flooring, potting and encapsulation applications. It is commonly used as a reactive diluent for high-viscosity epoxy resins. This product has a very low viscosity and is compatible at all concentrations with epoxy resins. Resulting blends can be cured using any epoxy curing agents. 收起 | |
| FR50 | Sino-American Pigment Systems, Inc. | FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. 收起 | |
| FR52 | Sino-American Pigment Systems, Inc. | FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. 收起 | |
| FR54 | Sino-American Pigment Systems, Inc. | FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. 收起 | |
| FR56 | Sino-American Pigment Systems, Inc. | FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. 收起 | |
| FR58 | Sino-American Pigment Systems, Inc. | FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. 收起 | |
| FR60 | Sino-American Pigment Systems, Inc. | FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. 收起 | |
| FR62 | Sino-American Pigment Systems, Inc. | FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. 收起 | |
| FR64 | Sino-American Pigment Systems, Inc. | FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...展开 FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. 收起 | |
| Glass Beads, Type I | Sino-American Pigment Systems, Inc. | Glass Beads, Type I, in the form of a colorless and transparent ball without visible bubbles or impurities, are a reflecting agent used in traffic paints. This product is composed of sodium and calcium, with its silicon dioxide content greater than 68%. ...展开 Glass Beads, Type I, in the form of a colorless and transparent ball without visible bubbles or impurities, are a reflecting agent used in traffic paints. This product is composed of sodium and calcium, with its silicon dioxide content greater than 68%. Its density lies between 2.4 and 2.6 g/cm3 and its refractive index is greater than 1.5. 收起 | |
| Glass Beads, Type III | Sino-American Pigment Systems, Inc. | Glass Beads, Type III, in the form of a colorless and transparent ball without visible bubbles or impurities, are grinding agents. This product can be used as filler or a dispersant in paint, inks, and chemicals. its specific gravity lies between 2.4 an...展开 Glass Beads, Type III, in the form of a colorless and transparent ball without visible bubbles or impurities, are grinding agents. This product can be used as filler or a dispersant in paint, inks, and chemicals. its specific gravity lies between 2.4 and 2.6 g/cm3 and its compressive strength is greater than 1200N. 收起 | |
| H-Sperse® 2000A | Harcros Chemicals, Inc. | H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglome...展开 H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglomeration and flocculation of many types of inorganic particulate materials. It is APE/NPE free, and exhibits very low toxicity. The phosphate functional group promotes excellent adhesion to the inorganic particulate giving good dispersion stability under difficult conditions, such as highly saline solutions. The phosphate groups can also enhance fire retardancy. In addition, the phosphate groups can also enhance corrosion resistance in coatings applied to metals. 收起 | |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...展开 H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. 收起 | |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...展开 H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. 收起 | |
| H-Sperse® 4000N | Harcros Chemicals, Inc. | H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate lon...展开 H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate long term viscosity stability. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. Excellent color strength may be achieved by using H-Sperse® 4000N. 收起 | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...展开 H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. 收起 | |
| Harcryl® 1228 | Harcros Chemicals, Inc. | Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer system...展开 Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization. The phosphate functional group promotesadhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 to easily incorporate into many coating systems. 收起 | |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorpor...展开 Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. 收起 | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...展开 Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. 收起 | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...展开 Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| R208 | Sino-American Pigment Systems, Inc. | R208, in the form of a white powder, is a general-purpose grade of rutile titanium dioxide. This product has been created through the sulfate process and can be used in inks and traffic paints. It offers fair hiding power, dispersibility, and low oil ab...展开 R208, in the form of a white powder, is a general-purpose grade of rutile titanium dioxide. This product has been created through the sulfate process and can be used in inks and traffic paints. It offers fair hiding power, dispersibility, and low oil absorption. 收起 | |
| R255z/R255 | Sino-American Pigment Systems, Inc. | R255z/R255, in the form of a white powder, is a general-purpose rutile titanium dioxide pigment. This product has been created through the sulfate process, and can be used in aqueous or solvent-based paints, paper coatings, waxing stock, and rubber appli...展开 R255z/R255, in the form of a white powder, is a general-purpose rutile titanium dioxide pigment. This product has been created through the sulfate process, and can be used in aqueous or solvent-based paints, paper coatings, waxing stock, and rubber applications. It has been treated with organic and inorganic surface material and offers good hiding, brightness, and dispersibility. 收起 | |
| SR50 | Sino-American Pigment Systems, Inc. | SR50, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR50, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. 收起 | |
| SR52 | Sino-American Pigment Systems, Inc. | SR52, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR52, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. 收起 | |
| SR54 | Sino-American Pigment Systems, Inc. | SR54, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR54, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. 收起 | |
| SR56 | Sino-American Pigment Systems, Inc. | SR56, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR56, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. 收起 | |
| SR58 | Sino-American Pigment Systems, Inc. | SR58, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR58, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. 收起 | |
| SR60 | Sino-American Pigment Systems, Inc. | SR60, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR60, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. 收起 | |
| SR62 | Sino-American Pigment Systems, Inc. | SR62, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR62, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. 收起 | |
| SR64 | Sino-American Pigment Systems, Inc. | SR64, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oi...展开 SR64, in the form of a white solid at ambient temperature, is a semi-refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. 收起 | |
| Venadol™ 104 | Harcros Chemicals, Inc. | Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol...展开 Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104 PG50 | Harcros Chemicals, Inc. | Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various...展开 Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 PG50 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104BC | Harcros Chemicals, Inc. | Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...展开 Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104BC to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104DPM | Harcros Chemicals, Inc. | Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilizati...展开 Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104DPM to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104E | Harcros Chemicals, Inc. | Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...展开 Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104E to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104H | Harcros Chemicals, Inc. | Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...展开 Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104H to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 104PA | Harcros Chemicals, Inc. | Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various pro...展开 Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104PA to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. 收起 | |
| Venadol™ 20 | Harcros Chemicals, Inc. | Venadol™ 20 is an effective wetting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubri...展开 Venadol™ 20 is an effective wetting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ 40 | Harcros Chemicals, Inc. | Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be util...展开 Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ 65 | Harcros Chemicals, Inc. | Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is...展开 Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ 85 | Harcros Chemicals, Inc. | Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is ...展开 Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. 收起 | |
| Venadol™ DF 110 L | Harcros Chemicals, Inc. | Venadol™ DF 110 L is a high performance, nonionic, molecular defoamer and deaerator. Venadol DF 110 L excels where effective defoaming or de-airentraining and foam elimination/prevention is necessary without causing surface defects. | |
| White Cloud® 30 LITHOPONE | Sino-American Pigment Systems, Inc. | White Cloud® 30 LITHOPONE, in the form of a white powder, is a zinc sulfide opacifying pigment extender of titanium dioxide. This product can be used in high or medium grades of paints and coatings. It is compatible with all water-based or solvent-borne...展开 White Cloud® 30 LITHOPONE, in the form of a white powder, is a zinc sulfide opacifying pigment extender of titanium dioxide. This product can be used in high or medium grades of paints and coatings. It is compatible with all water-based or solvent-borne UV, EB and thermoset systems for paints, coatings, and inks from primers to finish coats. It offers fineness and good dispersibility in a co-crystalline particle with a high light-scattering and refractive index. 收起 | |
| White Cloud® SAFE YELLOW 65-c | Sino-American Pigment Systems, Inc. | White Cloud® SAFE YELLOW 65-c, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior or exterior latex applications, alkyd and acrylic coatings, and flexographic, g...展开 White Cloud® SAFE YELLOW 65-c, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior or exterior latex applications, alkyd and acrylic coatings, and flexographic, gravure or lithographic thermoset or UV-cured printing ink formulations. It is an inorganic pigment with a monoarylide yellow PY-65 shell that provides the chemical stability, thermostability, and abrasion resistance of inorganic pigments with the brightness, luster and tinting strength of organic pigments. 收起 | |
| White Cloud® SAFE YELLOW 74-HEI | Sino-American Pigment Systems, Inc. | White Cloud® SAFE YELLOW 74-HEI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in industrial coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure ...展开 White Cloud® SAFE YELLOW 74-HEI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in industrial coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure or lithographic thermoset or UV-cured printing ink formulations. It is a colored inorganic pigment encapsulated with a monoarylide yellow PY-74 shell, which provides the chemical stability, heat stability, and abrasion resistance of inorganic pigments with the brightness, luster, and tinting strength of an organic pigment. 收起 | |
| White Cloud® SAFE YELLOW 83-CI | Sino-American Pigment Systems, Inc. | White Cloud® SAFE YELLOW 83-CI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure and ...展开 White Cloud® SAFE YELLOW 83-CI, in the form of a dry yellow powder, is a blend of organic and inorganic yellow pigments. This product can be used in traffic coatings, interior and exterior latex, alkyd and acrylic coatings, and flexographic, gravure and lithographic thermoset or UV-cured printing ink formulations. It is a colored inorganic pigment encapsulated in a diarylide yellow PY-83 shell, which provides the chemical stability, heat stability, and abrasion resistance of inorganic pigments, with the brightness, luster and tinting strength of organic pigments. 收起 | |
| White Cloud® SYIC-c | Sino-American Pigment Systems, Inc. | White Cloud® SYIC-c, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces orga...展开 White Cloud® SYIC-c, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces organic usage while improving flow, opacity, dispersibility and film performance. 收起 | |
| White Cloud® SYIC-h | Sino-American Pigment Systems, Inc. | White Cloud® SYIC-h, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces orga...展开 White Cloud® SYIC-h, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces organic usage while improving flow, opacity, dispersibility and film performance. 收起 |
