| Accelerator 2950 | Huntsman Advanced Materials 亨斯迈先进材料 | 当与多胺、聚酰胺及其加成物共用时，Accelerator 2950 固化剂是一种有效的促进剂和共反应固化剂。它可用于固化液体环氧树脂，例如用于无溶剂涂料及地坪体系中的 Araldite® GY 9708-3 树脂、Araldite® PY 302-2 树脂。它也可以用于固化固体环氧树脂或溶剂型固体环氧，如用于船舶维护的溶剂型 Araldite® GZ 7071 X 75 树脂。当其在主剂中用量为1-3%时，Accelerator 2950固化剂也是聚氨酯体系有效的促进剂及共反应固化剂。 | |
| Ara®Cool 1034 XW 90 | Huntsman Advanced Materials 亨斯迈先进材料 | Ara®Cool 1034 XW 90是改性曼尼期碱类固化剂。它在低温下有极其长的可操作时间，以及显著的反应活性。它有非常低的VOC（<10%溶剂）。在0-5℃的低温下，漆膜硬度增长显著。在喷砂钢板上具有优异的柔韧性，附着力和防腐性。无需熟化即可消除漆膜泛白。与Accelerator 2950配合使用时，可获得显著的催化效果。 | |
| Ara®Cool 1047 W80 | Huntsman Advanced Materials 亨斯迈先进材料 | Ara®Cool 1047 W80 is a special hardener for low temperature cure on metallic surfaces. It can be combines with liquid, semi-solid, or solid epoxy resins in solution for solvent-containing, ambient-curing high-performance coatings for metals or concrete. T...展开 Ara®Cool 1047 W80 is a special hardener for low temperature cure on metallic surfaces. It can be combines with liquid, semi-solid, or solid epoxy resins in solution for solvent-containing, ambient-curing high-performance coatings for metals or concrete. This product imparts good hardness, outstanding surface appearance, recoatability, flexibility, and adhesion. 收起 | |
| Ara®Cool 3077 | Huntsman Advanced Materials 亨斯迈先进材料 | AraCool 3077是一种不含壬基酚和苯甲醇的胺类快速固化剂。可单独使用，或与其它Aradur固化剂配合使用。可用于替换Aradur 3369和Aradur 14（含SVHC：被高度关注的物质）。配制的涂料有以下特点：较好的机械性能；很高的反应活性；在低温下具有好的漆膜外观；不含双酚A，不含苯酚，不含壬基酚或烷基酚；不含苯甲醇（低排放固化剂）。 | |
| Aradur® 340 Waterborne Epoxy Hardener | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur®340水性环氧固化剂乳化液体环氧树脂，无需预乳化，即可制备水性高固含，常温固化涂料，适用于各种工业应用。另外，也可以结合Aradur®340水性环氧固化剂和环氧树脂乳液使用。 | |
| Aradur® 36 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 36是一款水性环氧固化剂，可以与液体环氧树脂一起使用，例如Araldite GY9708-3、GY 776，也可以与环氧乳液一起使用，例如PZ 33757/67，应用于矿物及金属基材。当Aradur® 36与丙烯酸改性环氧搭配使用时，适用于较高耐紫外要求的面漆。 Aradur® 36与液体环氧乳液搭配还适用于环氧混凝土水泥。 | |
| Aradur® 38-1 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 38-1 Epoxy Curing Agent is a formulated polyamine adduct, dissolved in water. Used with liquid epoxy resins such as Araldite® GY 776 Resin, or the emulsion PZ 33757/67, Aradur® 38-1 Epoxy Curing Agent is suitable for the formulation of water-dilut...展开 Aradur® 38-1 Epoxy Curing Agent is a formulated polyamine adduct, dissolved in water. Used with liquid epoxy resins such as Araldite® GY 776 Resin, or the emulsion PZ 33757/67, Aradur® 38-1 Epoxy Curing Agent is suitable for the formulation of water-dilutable coatings for application to mineral and metallic substrates. It is particularly suitable for solvent-free dispersion coatings with a high solids content. 收起 | |
| Aradur® 3805 Waterborne Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固® 3805 环氧固化剂是一种水性胺类固化剂，专为配制双组份室温及加热固化涂料而设计。它与改性及未改性液态环氧树脂 （如爱牢达® GY 9513 环氧树脂及爱牢达® GY9708-3 环氧树脂）均具有相容性。 | |
| Aradur® 39 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固® 39 环氧固化剂是一种专为不含挥发性有机化合物（VOC）的双组份、室温固化涂料而设计的水性胺类固化剂。产品为50%固含量的水溶液（按供应形态），不含有机溶剂。该产品可以被水稀释至30%固量（重量），但可能变得浑浊。爱牢固 39 环氧固化剂不适于和固体树脂分散液共用，因为浇注膜不能充分聚结。与液体环氧树脂共用时，可形成零VOC、快速干燥、具有水汽穿透性能（呼吸性能）及粘接性的膜。 | |
| Aradur® 3951 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3951是一款多官能度聚酰胺类固化剂，主要用于水可稀释型环氧树脂系统。Aradur® 3951是针对双组分金属防腐底漆配方而开发，用于金属富锌底漆以及底面一体涂料，应用范围涉及普通工业、船舶以及集装箱。当其与LPY15011、Araldite® PZ 3961-1等固体环氧分散体配合使用时，可以获得以下特点：低VOC含量、快速干燥、7小时的适用期以及优异的防腐能力。Aradur® 3951按照合适方法与锌粉配合后，可以稳定抑制氢气的产生。 | |
| Aradur® 3984 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3984 环氧固化剂是一支脂肪胺改性的水性固化剂，用于配制双组份室温固化或加热固化的涂料配方。 该产品不含有机溶剂，以 80%的水溶液形式供应。该产品可用水稀释，但当稀释至固含量低于 35%时会形成乳状液。 | |
| Aradur® 3985 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3985环氧固化剂供应方式是55％（重量比）固体在水中，不含有机溶剂或醋酸。该固化剂专为零VOC水性环氧底漆、密封剂、涂料、地坪漆等配方设计。 Aradur® 3985环氧固化剂与改性和未改性环氧树脂相容。基于Aradur® 3985环氧树脂固化剂的配方体系的使用寿命有“可见终点”（凝胶化）。它也可以作为改性剂用于水性固化剂，不会提供使用寿命“可见终点”。 | |
| Aradur® 3986 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固®3986环氧固化剂是一种胺类固化剂，专门用于配制水可稀释环氧树脂体系。该产品不含挥发性胺类及溶剂，专为配制抗腐蚀底漆（例如，配合水性环氧树脂使用，如爱牢达® PZ 3961-1环氧树脂）及其它水性涂料而开发。爱牢固3986 环氧固化剂具有可见使用期结束的特性（通过粘度上升监测），并能提供快速固化、短表干时间、长操作时间等优势，适用于改性及未改性液体环氧树脂。 | |
| Aradur® 3987 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3987 is a modified polyamine adduct dissolved in water. It is distinguished by high reactivity, short curing times, high chemical resistance, and high thermal resistance. This product can be used with liquid epoxy resins like Araldite® GY 776, liq...展开 Aradur® 3987 is a modified polyamine adduct dissolved in water. It is distinguished by high reactivity, short curing times, high chemical resistance, and high thermal resistance. This product can be used with liquid epoxy resins like Araldite® GY 776, liquid resin emulsions like Araldite® PZ 33757-67, or with solid type 1 resin dispersions like Araldite® PZ 3961-1 for the formulation of water-based coatings and layers onto mineral and metallic substrates. 收起 | |
| Aradur® 450 Hardener | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固® 450 固化剂是一种低粘度固化剂，专为高湿度或湿环境应用而设计。爱牢固 450 固化剂可与液态双酚A和/或双酚F环氧树脂配合使用，能够为湿混凝土基材提供最佳性能。 | |
| Aradur® LME 11061 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® LME 11061 is an aliphatic polyamine adduct (60% solids) in solution (xylene/butanol, 3/1). It offers tack-free films without pre-reaction, outstanding adhesion to metals, concrete and wood, and high flexibility. This product is recommended for sol...展开 Aradur® LME 11061 is an aliphatic polyamine adduct (60% solids) in solution (xylene/butanol, 3/1). It offers tack-free films without pre-reaction, outstanding adhesion to metals, concrete and wood, and high flexibility. This product is recommended for solvent-containing, ambient-curing high-performance coatings for metals or concrete. 收起 | |
| Aradur® LME 11134 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® LME 11134 is a new generation polyamidoamine hardener in solution (90% solid). It offers good surface properties, outstanding adhesion to metals, and high flexibility of the cured films. This product is recommended for solvent-containing, ambient-...展开 Aradur® LME 11134 is a new generation polyamidoamine hardener in solution (90% solid). It offers good surface properties, outstanding adhesion to metals, and high flexibility of the cured films. This product is recommended for solvent-containing, ambient-curing high-performance coatings for metals or concrete. It can also be used for anti-corrosion coatings. 收起 | |
| Aradur® LME 11147 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® LME 11147 is an isolated polyamine adduct (80% solid) in solution. It offers good surface properties, tack-free films, outstanding adhesion, high flexibility, and excellent chemical resistance. This product is recommended for solvent-containing, a...展开 Aradur® LME 11147 is an isolated polyamine adduct (80% solid) in solution. It offers good surface properties, tack-free films, outstanding adhesion, high flexibility, and excellent chemical resistance. This product is recommended for solvent-containing, ambient-curing high-performance coatings for metals or concrete. It can also be used for anti-corrosion coatings. 收起 | |
| Araldite® ECN 1400 Epoxy Resin | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达®ECN 1400环氧树脂是一种稳定的，不发泡的高性能水性环氧甲酚酚醛树脂乳液。相比常规的双官能双酚A环氧树脂，环氧甲酚酚醛（ECN）树脂具有多个环氧官能团。 ECN树脂中的环氧官能度越高，能提供的交联密度也越高，这意味着更高的耐温性能，改进的耐化学品性能和比传统环氧树脂更好的附着力性能。 ECN树脂可以单独使用或结合常规环氧树脂使用，增强后者的性能。 ECN树脂可以均聚或与脂族族或芳香族胺，聚酰胺胺或者酸酐固化。它们也可以与羧基官能团聚酯和丙烯酸类树脂交联。 | |
| Araldite® PZ 323 Epoxy Resin | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达®PZ 323环氧树脂是一种含水75％（重量比），环氧酚醛树脂的固体乳液。结合水性聚酰胺乳液，Aradur®340环氧树脂固化剂，Araldite PZ 323环氧树脂可配制不含有机溶剂和中和酸的水性体系。 | |
| Araldite® PZ 33757/67 | Huntsman Advanced Materials 亨斯迈先进材料 | Araldite® PZ 33757/67 is an emulsified, crystallization-resistant epoxy resin. Combined with virtually any water-dilutable hardener as a cross-linking agent, Araldite® PZ 33757-67 is a suitable epoxy resin component for surface technologies and adhesives ...展开 Araldite® PZ 33757/67 is an emulsified, crystallization-resistant epoxy resin. Combined with virtually any water-dilutable hardener as a cross-linking agent, Araldite® PZ 33757-67 is a suitable epoxy resin component for surface technologies and adhesives which can be diluted with water, or a suitable reactive component in epoxy cement mortars. This product has excellent compatibility with virtually all water-based hardeners. The end properties of such systems depend particularly on the choice of hardeners and additives used. 收起 | |
| Araldite® PZ 3961-1 Epoxy Resin | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达®PZ 3961-1环氧树脂是一个“1型”固体环氧树脂乳液，它具有良好的综合性能，可用于金属或混凝土上的自干和烘干固化涂料。基于该乳液制成的金属涂料具有快速干燥时间，良好的附着力，柔韧性和耐腐蚀性。它可与各种爱牢固®水性环氧固化剂结合，配制成含低挥发性有机化合物（VOC）含量和具有广泛终端性能的涂料。 | |
| Araldite® PZ 3963 | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达® PZ 3963 是一种可用水稀释的双酚 A 型环氧树脂。基于此产品的涂料产品，在配套Aradur 38-1 固化剂使用时，具有很好的加工性和施工性。 | |
| Dehydran® P 3615 | BASF Formulation Additives 巴斯夫配方助剂 | 基于烷基聚醚和改性脂肪族化合物的乳液配方用抑泡消泡剂。 | |
| DISPEX® AA 4030 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4030 is an effective polymeric dispersing agent based on acrylic acid ammonium salt. | |
| DISPEX® AA 4135 NA | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| DISPEX® AA 4140 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of ...展开 DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes. 收起 | |
| Dispex® AA S 760 | BASF Formulation Additives 巴斯夫配方助剂 | 水性颜料的分散剂，和聚乙烯丙烯酸，聚乙烯丙烯酸酯，苯乙烯丁二烯和它们的共聚物相容 | |
| Dispex® AA S040 | BASF Formulation Additives 巴斯夫配方助剂 | 用于水性颜填料、色浆及制陶业的润湿分散剂。 | |
| DISPEX® CX 4230 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4230 is a low VOC, low odor hydrophobic dispersant for interior and exterior architectural coatings. It is used to disperse titanium dioxide and extender pigments. It is added levels ranging from 1.05 to 3.0% based on pigment solids. | |
| Dispex® CX 4231 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4231 (以前的Ultradispers® AB 30)是一种羧酸共聚物的多铵盐。它具有显著的憎水性，可减少拖尾和吸水性 | |
| Dispex® CX 4234 | BASF Formulation Additives 巴斯夫配方助剂 | 用于内外墙建筑涂料的疏水性分散剂。 | |
| DISPEX® CX 4240 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in...展开 DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. 收起 | |
| DISPEX® CX 4320 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersi...展开 DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersing inorganic fillers and pigments in high gloss, semi-gloss and highly filled interior paints. It also improves wet-scrub resistance, blocking resistance and has excellent ZnO-compatibility. 收起 | |
| DISPEX® CX 4340 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in wa...展开 DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. 收起 | |
| Dispex® CX 4345 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4345 (以前的Ultradispers® MD 21)是一种高效羧酸共聚物的多钠盐的水溶液。它的憎水性可大大改善其耐湿擦洗性 | |
| DISPEX® CX 4910 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. ...展开 DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. DISPEX® CX 4910 is a sodium salt of an acrylic polymer. For the production of systems, traded as ‘dry systems’, DISPEX® CX 4910 is typically incorporated into the dry powder mix by a normal dry blending operation. Upon wetting of such a ‘dry system’ a waterbased paste/slurry is generated. DISPEX® CX 4910 is effective over a pH range 5-12 and up to temperatures in excess of 100°C. 收起 | |
| Dispex® Ultra FA 4401 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4401 (formerly Pluracoat® Dispersal DA 120) is a non-ionic surfactant with excellent pigment wetting and dispersing properties. It is compatible with other nonionic, anionic, and cationic surfactants. | |
| DISPEX® Ultra FA 4404 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyp...展开 DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyphosphate with those of an organic dispersant thus yielding highly concentrated, stable and low-viscosity inorganic pigment suspensions, e. g. TiO2-slurries. 收起 | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...展开 DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. 收起 | |
| DISPEX® Ultra FA 4420 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal c...展开 DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal colorants for decorative paints. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4420 to the base paints (water and solvent) can increase compatibility and color acceptance and prevents de-wetting of the colorants. DISPEX® Ultra FA 4420 is an activator for Bentonites as well as for associated and acrylic thickeners. 收起 | |
| DISPEX® Ultra FA 4425 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints ...展开 DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints into which they may be incorporated. This results in: maximum color development of the colorant based on DISPEX® Ultra FA 4425, optimum color acceptance of universal colorants in base-paints, and higher pigment loading in colorants. DISPEX® Ultra FA 4425, used as a single wetting and dispersing agent, is considered suitable for VOC-free applications, particularly universal colorants. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4425 to the base paints (water and solvent) can increase compatibility and color acceptance, especially in water-based and ultra-low aromatic content decorative paints. 收起 | |
| Dispex® Ultra FA 4430 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4430 (以前的Lumiten® N-OC 30) 是一种非离子型表面活性剂，可用于改善乳胶漆的储存稳定性及其与水泥和石灰的相容性 | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...展开 DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. 收起 | |
| DISPEX® Ultra FA 4437 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to...展开 DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to-wet substrates. The emulsifying effect of this product also prevents surface defects such as craters, fisheyes, pinholes and streaks caused by incompatible components. Furthermore, DISPEX® Ultra FA 4437 has a strong affinity to pigment surfaces thereby reducing color acceptance problems. 收起 | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra...展开 DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. 收起 | |
| Dispex® Ultra FA 4483 | BASF Formulation Additives 巴斯夫配方助剂 | 无机颜料分散剂和乳胶制备的稳定表面活性剂 | |
| DISPEX® Ultra PA 4503 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- a...展开 DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- and solvent-based decorative paint systems means these concentrates are suitable for the production of tinting systems where only low shear forces (shaking machines) are used. The chemical character of DISPEX® Ultra PA 4503 makes it suitable for systems with a wide pH range (5–12). 收起 | |
| Dispex® Ultra PA 4516 | BASF Formulation Additives 巴斯夫配方助剂 | 开发作为颜料研磨树脂，用于水性油墨。可作为单一树脂组分用于颜料研磨基料，该基料随后可用作开稀阶段使用其他担体的水性油墨基底 | |
| DISPEX® Ultra PA 4550 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. D...展开 DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. DISPEX® Ultra PA 4550 is pH-independent and has a broad compatibility in most commonly used water-based coatings. It is completely water-soluble and does not need to be neutralized. 收起 | |
| DISPEX® Ultra PA 4560 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior...展开 DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. DISPEX® Ultra PA 4560 is, in combination with DISPEX® Ultra PA 4503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). 收起 | |
| Dispex® Ultra PA 4580 | BASF Formulation Additives 巴斯夫配方助剂 | 稳定有机颜料和无机颜料，在色浆中有强降黏效果，提高光泽，防止浮色和发花，提高颜料着色力，抗絮凝 | |
| Dispex® Ultra PA 4590 | BASF Formulation Additives 巴斯夫配方助剂 | 经济型高分子分散剂，用于各类水性工业涂料和颜料色浆中 | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...展开 DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. 收起 | |
| DISPEX® Ultra PX 4575 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra ...展开 DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. 收起 | |
| DISPEX® Ultra PX 4585 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low...展开 DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4585 is especially suited for the dispersion of pigments in water-based coatings. DISPEX® Ultra PX 4585 offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes DISPEX® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC). 收起 | |
| Efka® 3650 N | BASF Formulation Additives 巴斯夫配方助剂 | Efka® 3650 N可降低有机涂料体系的表面张力。其良好的相容性使之可有效防缩孔并提供流平控制。它的物理状态为浅黄色液体。Efka® 3650 N尤其适合用于基于醇酸的烤瓷漆、丙烯酸或聚酯树脂、聚氨酯涂料，双组份环氧涂料和自干醇酸体系 | |
| EFKA® FA 4600 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...展开 EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. 收起 | |
| EFKA® FA 4601 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regardi...展开 EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regarding interfacial activity. The mode of action of EFKA® FA 4601 systems results from the high surface activity of its constituents with almost all pigments. If processed properly, the individual pigment particles are coated with a monomolecular layer of adsorbed compounds which prevent agglomeration into larger particles, with the result that the fine particles remain in suspension and no caking occurs. This viscous liquid is a blend of selected fatty alcohol sulfates. EFKA® FA 4601 does not contain any alkali ions, and it is effective in most paints, provided they are not distinctly polar in their composition. 收起 | |
| Efka® FA 4610 | BASF Formulation Additives 巴斯夫配方助剂 | 阴离子型分散剂，特为钛白粉分散开发，也可用于其他的填料和无机颜料中，适用于汽车漆，工业漆，卷钢涂料和酸固化 | |
| Efka® FA 4612 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4612 (以前的 Efka® 5210)可帮助润湿和分散填料（CaCO3和AI (OH) 3），含不饱和聚酯树脂或结合聚苯乙烯，聚醋酸乙烯和苯乙烯-丁二烯共聚物。它可使填料易于添加，减少分散时间。它也可降低和稳定浆体粘度，从而改善流平，增加填料含量，并提高防火性能。Efka® FA 4612设计用于含填料的SMC和BMC共混物。它也适合用于含填料的胶衣涂料 | |
| Efka® FA 4615 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4615 (以前的Efka® 5215是一种有效地润湿和分散助剂，适用于无机填料。它可改善润湿性，使填料易于添加，降低浆体/混合物的粘度，增加填料含量。Efka® FA 4615适用于含填料的不饱和聚酯体系（SMC、BMC共混物、胶衣涂料和腻子）或结合聚苯乙烯、聚醋酸乙烯和苯乙烯-丁二烯共聚物。 | |
| EFKA® FA 4620 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler an...展开 EFKA® FA 4620 helps to wet and disperse solid particles (e.g. CaCO3, ATH) in unsaturated polyester resin systems. This results in improved wetting and incorporation of fillers and extenders, reduced viscosity of the paste/compound, and increased filler and extender loading. EFKA® FA 4620 is suited for filled unsaturated polyester systems (e.g. SMC/BMC, gel coats, car putties) or combinations with polystyrene, polyvinylacetate and styrene-butadiene copolymers (e.g. LS- or LP formulations). 收起 | |
| EFKA® FA 4642 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...展开 EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. 收起 | |
| EFKA® FA 4644 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigm...展开 EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigment sedimentation, and increased gloss and improved flow. EFKA® FA 4644 is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. 收起 | |
| EFKA® FA 4654 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced...展开 EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced pigment sedimentation, reduced tendency to sag during application on vertical surfaces, and prevention of flooding. It is a high molecular weight carboxylic acid salts. EFKA® FA 4654 is ideal for dispersing organophilic bentonites, because it reduces dispersion time, improves the storage properties of the final paste and gives a thixotropic, easily processed paste product. It is especially suitable for non- to medium-polar binder systems, ie. air-dried alkyd resins, chlorinated polymers, alkyd/amino resin combinations and epoxies. EFKA® FA 4654 can cause discoloration in nitrocellulose varnishes. 收起 | |
| Efka® FA 4654 EM | BASF Formulation Additives 巴斯夫配方助剂 | 用于中性和非极性涂料的分散、防沉、防浮色和发花助剂，兼作有机膨润土的凝胶化助剂。 | |
| EFKA® FA 4663 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...展开 EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. EFKA® FA 4663 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. 收起 | |
| EFKA® FA 4665 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, s...展开 EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. 收起 | |
| EFKA® FA 4666 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents floodi...展开 EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents flooding/floating and stabilizes pigment dispersion. EFKA® FA 4666 is especially suited for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane systems, acrylic polyisocyanate systems (2-pack acrylics) and chlorinated polymers. 收起 | |
| Efka® FA 4670 | BASF Formulation Additives 巴斯夫配方助剂 | 高分子两不饱和羧酸，降低亲水颜料或填料和载体间的界面张力，减少分散时间，稳定颜料分散，减少颜料沉淀，防止浮色和发花 | |
| EFKA® FA 4671 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimen...展开 EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimentation. This product is an alkylol ammonium salt of a high-molecular weight carboxylic acid. EFKA® FA 4671 is suitable for use in low or high-polarity solvent systems as well as water-based coatings. It is used to reduce flooding and settling in non-polar systems e.g. air drying alkyd paints. It is an effective anti-settling agent in wash and shop primers. It improves the color acceptance of tinting bases in white latex paints, resulting in higher pigment efficiency. 收起 | |
| Efka® FA 4672 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4672 (之前的Texaphor® SF 71)是一种润湿和分散助剂，用于反应性树脂。该无色到浅黄色液体是一种离子和非离子酯的混合物。它的降粘特性使之可专门用于高固含和全固含体系。Efka® FA 4672确保填料可被快速并优化的分散。降粘作用使填料更易混合，可获取更高的填料含量。Efka® FA 4672与各种基料类型相容，因此可用于双组份PUR、双组份EP和不饱和聚酯树脂 | |
| Efka® FA 4673 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4673 (以前的Texaphor® 873 Conc)是一种分散助剂，用于主要含无机颜料和有机媒介的颜料色浆，用于塑料、涂料和印刷油墨的着色 | |
| Efka® FL 3670 | BASF Formulation Additives 巴斯夫配方助剂 | IRGAFLOW 110是一种改性聚（丙烯酸酯）流平剂，具有优化的性能。它与大多数溶剂型树脂具有良好的整体相容性，是一种非常有效的抗缩孔和流平控制剂，不会造成泡沫稳定，比IRGAFLOW 100具有更高的流平效率 | |
| EFKA® FL 3740 EH | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coating...展开 EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow, dispersion and floating behaviour, prevents air entrapment and optimizes wetting of the substrate. EFKA® FL 3740 is also ideally suited to be used in the manufacture of powder coatings or binders for powder coatings. For the preparation of a master batch, it is recommended to use a mixing of 9 parts of polyester resin with 1 part EFKA® FL 3740. This mixture is perfectly suited for direct application in the premix and extrusion process after melting, homogenization, cooling and granulation. The drawbacks of leveling agents applied on SiO2 are avoided. In particular, pigmented and transparent powder coatings with excellent levelling properties are obtained for the production of weatherproof powder coatings. 收起 | |
| Efka® FL 3741 | BASF Formulation Additives 巴斯夫配方助剂 | 无硅无溶剂的流平剂，可用于不同反应性树脂体系的脱气 | |
| EFKA® FL 3745 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3745 is a silicone-free levelling agent with air release properties for powder coatings. It can be used in liquid non-aqueous coatings as well as in powder coating. Due to its chemical structure EFKA® FL 3745 modifies the surface tension of powde...展开 EFKA® FL 3745 is a silicone-free levelling agent with air release properties for powder coatings. It can be used in liquid non-aqueous coatings as well as in powder coating. Due to its chemical structure EFKA® FL 3745 modifies the surface tension of powder coatings. By formulating with this product, smooth trouble-free film surfaces will be obtained, generally with an improvement in gloss. This copolyacrylate is a clear, colorless liquid. 收起 | |
| Efka® FL 3770 | BASF Formulation Additives 巴斯夫配方助剂 | IRGAFLOW 100是一种改性聚（丙烯酸酯）流平剂，具有优化的性能。它与大多数溶剂型树脂具有良好的整体相容性，是一种非常有效的抗缩孔和流平控制剂，不会造成泡沫稳定 | |
| EFKA® FL 3778 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and ai...展开 EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and air-drying alkyd systems. 收起 | |
| EFKA® FL 3785 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL ...展开 EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL 3785 is especially suitable for coil coatings, two-pack epoxy or polyurethane coatings, baking enamels and gelcoats. For enhanced performance in coil and two-pack coatings, EFKA® FL 3785 can be combined with EFKA® FL 3600. Compared to fluorocarbon-modified acrylates or silicone leveling additives, EFKA® FL 3785 has less influence on surface tension and more effect on de-aeration. 收起 | |
| Efka® FL 3930 | BASF Formulation Additives 巴斯夫配方助剂 | 用于粉末涂料的粉末状无硅流平剂 | |
| Efka® MI 6779 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® MI 6779 (formerly Texaquart® 879 N) is a cationic additive to increase the electric conductivity of industrial coatings. Due to its strong polar character Efka® MI 6779 increases the electric conductivity or, in other words, decreases the electric r...展开 Efka® MI 6779 (formerly Texaquart® 879 N) is a cationic additive to increase the electric conductivity of industrial coatings. Due to its strong polar character Efka® MI 6779 increases the electric conductivity or, in other words, decreases the electric resistance of a liquid or solid paint film. The product being highly surface active encourages dispersion of the paint into fine droplets whilst being electrostatically sprayed. 收起 | |
| Efka® PA 4101 | BASF Formulation Additives 巴斯夫配方助剂 | 用于生产微脂色母浆的分散树脂，表现出良好的润湿性和稳定性，与常用的树脂相容性极佳，能与胺基树脂或聚异氰酸酯交联 | |
| EFKA® PA 4400 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all...展开 EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all kinds of solvent borne coatings. EFKA® PA 4400 is an acrylic polymer with significant higher molecular weight compared with the EFKA® polyurethane-based polymeric dispersants. This gives better deflocculation of organic pigments. 收起 | |
| EFKA® PA 4401 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from lo...展开 EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from low- to high-polarity systems, including nitrocellulose. Care should be taken with EFKA® PA 4401 because of its tendency to yellowing and gelling when combined with chlorinated polymers. It also has a tendency to yellowing when combined with solvent-free epoxies. EFKA® PA 4401 is used for all kinds of high-quality solvent-based industrial coatings including automotive topcoats as well as pigment concentrates. 收起 | |
| Efka® PA 4414 | BASF Formulation Additives 巴斯夫配方助剂 | 聚合物分散剂，可提高有机颜料分散性，从而提高着色强度，降低粘度和增加光泽。可增强颜料基在碾磨中的加工性，允许更高的颜料使用量。它能提高成品油墨的展色性和流变性能 | |
| EFKA® PA 4450 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PA 4450 is a polymeric dispersant for inorganic and organic pigments in non-aqueous, polar and non-polar coatings. This clear liquid avoids flocculation of pigments, increases color strength and also reduces grinding time. It is a carboxyl functiona...展开 EFKA® PA 4450 is a polymeric dispersant for inorganic and organic pigments in non-aqueous, polar and non-polar coatings. This clear liquid avoids flocculation of pigments, increases color strength and also reduces grinding time. It is a carboxyl functional polymer that can be used in all systems independent from its polarity, e. g. alkyds, PE, acrylics. 2 - component polyurethane paints, 2 - component epoxy paints, unsaturated polyester. The application in systems with low polarity is possible as well. EFKA® PA 4450 is used in combination with all commonly used solvents. It shows good solubility even with isoparaffins, which makes it very useful for these systems. It also shows excellent performance when used as a dispersant in pigment pastes. 收起 | |
| EFKA® PB 2001 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001...展开 EFKA® PB 2001 is a silicone-free defoamer for non-aqueous coatings, printing inks, and especially for high viscous coatings based on 2-pack epoxy, unsaturated polyester, and PUR systems. It is a solution of vinyl polymer in organic solvents. EFKA® PB 2001 is used in nitrocellulose lacquers, particularly those applied on curtain coaters, 1- or 2-component acid curing wood coatings, particularly fast drying types applied on curtain coaters, acrylic resin finishes, air drying epoxy resin paints and unsaturated polyester. The paint industry uses defoamers to ensure that air bubbles occurring during application of lacquers and paints can escape from the film while still wet. The formation of craters is thus substantially eliminated. One must differentiate between: bubbles which originate from the substrate (wood and paper are typical examples), and bubbles which may be generated in the paint by pumping, rolling, airless spraying or curtain coating. 收起 | |
| EFKA® PB 2010 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2010 is a silicone-free defoamer with good compatibility, intended to accelerate defoaming as well as to improve clarity in solvent-based coatings. It eliminates foaming and blistering regardless of whether the air bubbles are a result of the sub...展开 EFKA® PB 2010 is a silicone-free defoamer with good compatibility, intended to accelerate defoaming as well as to improve clarity in solvent-based coatings. It eliminates foaming and blistering regardless of whether the air bubbles are a result of the substrate (e.g., wood or metal) or due to the application method (pumping, rolling, flooding or spraying). EFKA® PB 2010 performs well for a wide range of applications and is particularly suitable for clear coatings, without haziness, as well as providing high gloss if required. 收起 | |
| EFKA® PB 2018 AN | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2018 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring, pumping etc. EFKA® PB 201...展开 EFKA® PB 2018 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring, pumping etc. EFKA® PB 2018 is especially suited for solvent-based wood finishes if foam formation is a problem when applied by spraying or curtain coating. It has very good compatibility properties which makes it extremely suitable for use in clear coatings. 收起 | |
| EFKA® PB 2020 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result ...展开 EFKA® PB 2020 is a clear, slightly yellowish liquid that accelerates defoaming in solvent-based coatings. It therefore eliminates foaming and blistering, regardless of whether the air bubbles are caused by the substrate, e.g. wood or paper or as a result of pumping, rolling, flooding or airless spraying. 收起 | |
| EFKA® PB 2021 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2021 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. This product ...展开 EFKA® PB 2021 can be used as a silicone-free defoamer for various coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. This product helps to prevent surface irregularities to give the smoothest possible surface. EFKA® PB 2021 is especially suited for solvent-based coatings if foam formation is a problem when applied by spraying or curtain coating. 收起 | |
| EFKA® PB 2720 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PB 2720 supports the quick de-aeration of thermosetting resin systems. It can be used in pigmented or non-pigmented resin systems such as unsaturated polyesters, 2-pack epoxies, and PVC-compounds. | |
| EFKA® PL 5381 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PL 5381 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of p...展开 EFKA® PL 5381 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of polymeric plasticizers. 收起 | |
| EFKA® PL 5382 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PL 5382 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to ...展开 EFKA® PL 5382 is an epoxy plasticizer for the paint industry. This light yellow liquid is made from epoxidized soybean oil. It protects paints and plastics against the influence of heat, light and weather, and thereby improves whiteness and resistance to ageing. It is compatible with PVC, many other plastics, synthetic resins, plasticizers and gives transparent films. It can be hardened with acids, anhydrides, and amines. Moreover, it remains stable even at higher temperatures. 收起 | |
| Efka® PL 5520 | BASF Formulation Additives 巴斯夫配方助剂 | 次等的增塑剂, 用于硝化纤维的木漆和家具漆. 和酸固化的一道二道成漆, 纸用清漆, 皮革用清漆, 特殊脂肪酸混合物的丁基酯 | |
| Efka® PL 5544 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® PL 5544 (以前的Dehysol® 344)是一种高粘性耐迁移的增塑剂，可用于PVC塑料、涂料包括玻璃纸和铝粉涂料、印刷油墨和相关应用。该产品不溶于水。它可以各种比例与所有脂肪族、脂环族和芳香族烃类混合，通常用于塑料和表面涂料树脂加工。它是一种浅黄色的液体二甲基环己酯 | |
| Efka® PL 5590 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® PL 5590 (以前的Dehysol® 190)是一种脂肪族单羧酸酯，可作为增塑剂用于塑料溶胶 | |
| EFKA® PU 4010 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, impr...展开 EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, improved gloss, prevention of flooding and floating problems and higher color strength. Due to its particularly good combination of price and performance, EFKA® PU 4010 is a very attractive substitute for conventional wetting and dispersing agents. It is possible to mix combinations of inorganic pigments stabilized with EFKA® PU 4010 and organic pigments stabilized with other EFKA® highmolecular-weight polymeric dispersants. 收起 |
