| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Araldite® GT 2874 | Jubail Chemical Industries Co. | Araldite® GT 2874 is a solid flow agent master batch epoxy resin. This product is used to facilitate the incorporation of a liquid flow agent in powder coatings during manufacture. | |
| Araldite® GT 6084 | Jubail Chemical Industries Co. | Araldite® GT 6084 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its ability to take on specific properties depending on with what it is combined with. Araldite® GT 6084 is designed for use in solvent-containing ...展开 Araldite® GT 6084 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its ability to take on specific properties depending on with what it is combined with. Araldite® GT 6084 is designed for use in solvent-containing coatings if it is combined with fatty acids and powder coatings if it is combined with specific curing agents. 收起 | |
| Araldite® GT 6099 | Jubail Chemical Industries Co. | Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of he...展开 Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of heat-curing primers and enamels as well as anti-corrosion paints when combined with polyisocyanates. 收起 | |
| Araldite® GT 6609 | Jubail Chemical Industries Co. | Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking pr...展开 Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking primers and enamels as well as cold-curing coatings when combined with polyisocyanates. 收起 | |
| Araldite® GT 6750 | Jubail Chemical Industries Co. | Araldite® GT 6750 is a solid, high flow epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity. Araldite® GT 6750 is designed for use in the formulation of thin film hybrid powder coatings. | |
| Araldite® GT 7004 | Jubail Chemical Industries Co. | Araldite® GT 7004 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity, pigment ability, storage stability, flow, gloss, and mechanical properties. Araldite® GT 7004 is designed for use ...展开 Araldite® GT 7004 is a solid, medium molecular weight epoxy resin based on Bisphenol A. This product is characterized by its melt viscosity, pigment ability, storage stability, flow, gloss, and mechanical properties. Araldite® GT 7004 is designed for use in powder coatings. 收起 | |
| Araldite® GT 7013 | Jubail Chemical Industries Co. | Araldite® GT 7013 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Araldite® GT 7013 is design...展开 Araldite® GT 7013 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Araldite® GT 7013 is designed for use in general and decorative coatings for metal furniture. 收起 | |
| Araldite® GT 7014 | Jubail Chemical Industries Co. | Araldite® GT 7014 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loadings. Araldite® GT 7014 is desig...展开 Araldite® GT 7014 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loadings. Araldite® GT 7014 is designed for use in coating systems in which high chemical resistance is important, metal coatings, tube coatings, and pipe coatings. 收起 | |
| Araldite® GT 7071 | Jubail Chemical Industries Co. | Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion ...展开 Araldite® GT 7071 is a low melting, solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7071 is designed for use in the formulation of protective coating systems and decorative coating systems. 收起 | |
| Araldite® GT 7072 | Jubail Chemical Industries Co. | Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. A...展开 Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7072 is designed for use in high performance coating systems. 收起 | |
| Araldite® GT 7074 | Jubail Chemical Industries Co. | Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formu...展开 Araldite® GT 7074 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, chemical resistance, corrosion resistance, and electrical properties. Araldite® GT 7074 is designed for use in the formulation of functional powder coating systems like pipe and rebar applications. 收起 | |
| Araldite® GT 7097 | Jubail Chemical Industries Co. | Araldite® GT 7097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, and flexibility as well as its resistance to chemicals, solvents, water, and corrosion. A...展开 Araldite® GT 7097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, and flexibility as well as its resistance to chemicals, solvents, water, and corrosion. Araldite® GT 7097 is used in the formulation of metal decorating finishes, can and coil coatings, primers and enamels, metal furniture finishes, and primers. 收起 | |
| Araldite® GT 7255 | Jubail Chemical Industries Co. | Araldite® GT 7255 is a solid epoxy resin based on Bisphenol A and Novolak. This product is characterized by its reactivity, electrical properties, corrosion resistance, chemical resistance, heat resistance, edge coverage, and adhesion properties. Araldite...展开 Araldite® GT 7255 is a solid epoxy resin based on Bisphenol A and Novolak. This product is characterized by its reactivity, electrical properties, corrosion resistance, chemical resistance, heat resistance, edge coverage, and adhesion properties. Araldite® GT 7255 is used in the formulation of powder coatings most suitable for rebar and pipe applications. 收起 | |
| Araldite® GY 250 | Jubail Chemical Industries Co. | Araldite® GY 250 is a universal purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Araldite® GY 250 is suitable for the formulation of solvent-fre...展开 Araldite® GY 250 is a universal purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Araldite® GY 250 is suitable for the formulation of solvent-free coatings, self-leveling and mortar, flooring screeds, toweling compounds etc. when cured with polyamines, polyamidoamines or their adducts. 收起 | |
| Araldite® GY 257 | Jubail Chemical Industries Co. | Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and ...展开 Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and acid. Araldite® GY 257 is used in the formulation of solvent-free coatings and structure adhesives. 收起 | |
| Araldite® GY 6010 | Jubail Chemical Industries Co. | Araldite® GY 6010 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 is used in the formulation of c...展开 Araldite® GY 6010 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 is used in the formulation of chemical resistant coatings and matrix adhesives. 收起 | |
| Araldite® GY 6010 CSR | Jubail Chemical Industries Co. | Araldite® GY 6010 CSR is a general purpose, unmodified, low to medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 CSR is used in the f...展开 Araldite® GY 6010 CSR is a general purpose, unmodified, low to medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 CSR is used in the formulation of chemical resistant coatings and matrix adhesives. 收起 | |
| Araldite® GY 6020 | Jubail Chemical Industries Co. | Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of...展开 Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of filament adhesives. 收起 | |
| Araldite® GZ 280 X 80 | Jubail Chemical Industries Co. | Araldite® GZ 280 X 80 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 80% in Xylene. This product is characterized by its ability to improve the chemical resistance and mechanical properties in end products. Araldite® GZ 280 X 80 is ...展开 Araldite® GZ 280 X 80 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 80% in Xylene. This product is characterized by its ability to improve the chemical resistance and mechanical properties in end products. Araldite® GZ 280 X 80 is used in the formulation for primers and finishing paints applied on metal substrates. 收起 | |
| Araldite® GZ 471 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 7...展开 Araldite® GZ 471 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Araldite® GZ 471 X 75 is used in the formulation of acrylic resin system coatings, marine maintenance, and protective coatings applications. 收起 | |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 70...展开 Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. 收起 | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B HEC，非离子型水溶性聚合物，是一种白色，自由流动的粒状粉末。它不溶于有机溶剂，但它很容易分散在冷水和热水中，得到不同粘度的溶液。此产品被用作增稠剂，保护胶体，基料，稳定剂和助悬剂，特别是应用于的需要非离子型材料的场合。 | |
| Natrosol™ FPS | Ashland | Natrosol™ FPS has high solids liquid suspensions designed for easy handling in conventional paint manufacturing equipment. | |
| Natrosol™ FPS Plus 330 | Ashland | Natrosol™ FPS Plus 330 is a aqueous dispersions of cellulosic water-soluble polymers for use as latex paint thickeners. | |
| Natrosol™ Hydroxyethylcellulose | Ashland | Natrosol™ Hydroxyethylcellulose is a nonionic water-soluble polymer derived from cellulose and its solutions are unaffected by cations. It dissolves readily in cold or hot water and is used to produce solutions having a wide range of viscosity. | |
| Natrosol™ Performax | Ashland | Natrosol™ hydroxyethylcellulose (HEC) 在过去的50年中始终是行业内领先的水基建筑涂料增稠剂。而现在Natrosol Performax HEC允许涂料生产商在涂料生产的任意时间点添加干燥形式的HEC而不会产生结块，这一特性将涂料制造过程中的灵活性和产品质量带到了一个史无前例的水平。 | |
| Natrosol™ Plus | Ashland | Natrosol™ Plus is a associative cellulosic polymer designed specifically for use in latex paints. | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...展开 Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. 收起 | |
| Natrosol™ Plus 550 HMHEC | Ashland | Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imp...展开 Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imparts excellent creamy in-can feel and smooth flow characteristics to water-based latex paints and coatings. 收起 | |
| pHLEX™ 100 | Ashland | pHLEX™ 100 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...展开 pHLEX™ 100 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 100 neutralizing agent, particularly when used in place of ammonium hydroxide. 收起 | |
| pHLEX™ 110 | Ashland | pHLEX™ 110 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...展开 pHLEX™ 110 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 110 neutralizing agent, particularly when used in place of ammonium hydroxide. 收起 | |
| PVP K-120 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑。可用于金属淬火浴。 | |
| PVP K-15 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑。可用于清洁剂中抑制染料迁移，用于平板印刷中增强油墨的憎水性。 | |
| PVP K-30 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑，用途广泛。 | |
| PVP K-60 | Ashland | 聚乙烯基吡咯烷酮，认为是生理学惰性的，可用水和大多数常用有机增塑剂增塑 | |
| PVP K-90 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑，用途广泛。 | |
| Razeen® 6138 | Jubail Chemical Industries Co. | Razeen® 6138 is a semi-solid phenol novolac based multifunctional epoxy resin. This product is characterized by its viscosity and its ability to improve the chemical resistance and mechanical properties in end products. Razeen® 6138 is used in marine and ...展开 Razeen® 6138 is a semi-solid phenol novolac based multifunctional epoxy resin. This product is characterized by its viscosity and its ability to improve the chemical resistance and mechanical properties in end products. Razeen® 6138 is used in marine and protective coatings, chemical resistant coatings, adhesives, and coil coatings. 收起 | |
| Razeen® LR 1100 | Jubail Chemical Industries Co. | Razeen® LR 1100 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1100 is used in the formulation of highly chemical ...展开 Razeen® LR 1100 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1100 is used in the formulation of highly chemical resistant coatings and matrix adhesives. 收起 | |
| Razeen® LR 1110 | Jubail Chemical Industries Co. | Razeen® LR 1110 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1110 is used in the formulation of...展开 Razeen® LR 1110 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1110 is used in the formulation of electro-deposition primers used in the automotive industry, as well as the production of UV cure epoxy acrylates. 收起 | |
| Razeen® LR 1120 | Jubail Chemical Industries Co. | Razeen® LR 1120 is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1120 is used in the formulation of high solid...展开 Razeen® LR 1120 is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1120 is used in the formulation of high solids chemical resistant coatings, matrix adhesives, and UV cur epoxy acrylates. 收起 | |
| Razeen® LR 1140-B | Jubail Chemical Industries Co. | Razeen® LR 1140-B is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1140-B is used in the formulation of high s...展开 Razeen® LR 1140-B is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1140-B is used in the formulation of high solids chemical resistant coatings, matrix adhesives, and UV cur epoxy acrylates. 收起 | |
| Razeen® LR 1150 | Jubail Chemical Industries Co. | Razeen® LR 1150 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1150 is used in the formulation of solvent-free coating...展开 Razeen® LR 1150 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1150 is used in the formulation of solvent-free coatings. 收起 | |
| Razeen® LR 1160 | Jubail Chemical Industries Co. | Razeen® LR 1160 is a liquid, unmodified, medium to high viscosity epoxy resin based on Bisphenol A. This product is characterized by its extremely low chlorine content. Razeen® LR 1160 is used in the formulation of automotive body coatings. | |
| Razeen® LR 1166 | Jubail Chemical Industries Co. | Razeen® LR 1166 is a general purpose, low viscosity epoxy resin based on Bisphenol A. This product is characterized by its extremely low chlorine content. Razeen® LR 1166 is used in the formulation of automotive body coatings. | |
| Razeen® LR 1170 | Jubail Chemical Industries Co. | Razeen® LR 1170 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1170 is used in the formulation of solvent-free coating...展开 Razeen® LR 1170 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and resistance to chemicals. Razeen® LR 1170 is used in the formulation of solvent-free coatings. 收起 | |
| Razeen® LR 2253 | Jubail Chemical Industries Co. | Razeen® LR 2253 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic diglycidyl ether. This product is characterized by its reactivity, surface hardness, flexibility, solvent resistance, and alkali resistance. Razeen® LR 2253 is ...展开 Razeen® LR 2253 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic diglycidyl ether. This product is characterized by its reactivity, surface hardness, flexibility, solvent resistance, and alkali resistance. Razeen® LR 2253 is used in the formulation of solvent-free coatings. 收起 | |
| Razeen® LR 2254 | Jubail Chemical Industries Co. | Razeen® LR 2254 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic monoglycidyl ether. This product is characterized by its diluting properties. Razeen® LR 2254 is used in the formulation of solvent-free coatings and structural...展开 Razeen® LR 2254 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic monoglycidyl ether. This product is characterized by its diluting properties. Razeen® LR 2254 is used in the formulation of solvent-free coatings and structural adhesives. 收起 | |
| Razeen® LR 2257 | Jubail Chemical Industries Co. | Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical performance, surface penetration, and its resistance to chemicals, acid, a...展开 Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical performance, surface penetration, and its resistance to chemicals, acid, and solvents. Razeen® LR 2257 is used in the formulation of solvent-free coatings and structural adhesives. 收起 | |
| Razeen® LR 2280 | Jubail Chemical Industries Co. | Razeen® LR 2280 is a high viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2280 is used in the formulation of anti-corrosion coatings, spray applied seal...展开 Razeen® LR 2280 is a high viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2280 is used in the formulation of anti-corrosion coatings, spray applied sealer lacquers, and primers and finishing paints for metal substrates. 收起 | |
| Razeen® LR 2282 | Jubail Chemical Industries Co. | Razeen® LR 2282 is a liquid, general purpose, unmodified epoxy resin based on Bisphenol F . This product is characterized by its viscosity, reactivity, compatibility, and low hydrolysable chlorine content. Razeen® LR 2282 is used in chemical resistant coa...展开 Razeen® LR 2282 is a liquid, general purpose, unmodified epoxy resin based on Bisphenol F . This product is characterized by its viscosity, reactivity, compatibility, and low hydrolysable chlorine content. Razeen® LR 2282 is used in chemical resistant coatings and matrix adhesives. 收起 | |
| Razeen® LR 2302 | Jubail Chemical Industries Co. | Razeen® LR 2302 is a liquid epoxy resin based on Bisphenol A/F . This product is characterized by its viscosity and low shrinkage of cure films as well as its ability to improve mechanical properties and chemical resistance in end products. Razeen® LR 230...展开 Razeen® LR 2302 is a liquid epoxy resin based on Bisphenol A/F . This product is characterized by its viscosity and low shrinkage of cure films as well as its ability to improve mechanical properties and chemical resistance in end products. Razeen® LR 2302 is used in solvent-free coatings, high solids coatings, and protective coatings. 收起 | |
| Razeen® LR 2308 | Jubail Chemical Industries Co. | Razeen® LR 2308 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 230-260 and a denisty of 1.14. Razeen® LR 2308 is used in outdoor applications, mainte...展开 Razeen® LR 2308 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 230-260 and a denisty of 1.14. Razeen® LR 2308 is used in outdoor applications, maintenance coatings, decorative paints, and acrylic finishes. 收起 | |
| Razeen® LR 2310 | Jubail Chemical Industries Co. | Razeen® LR 2310 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 130-150 and a denisty of 1.17. Razeen® LR 2310 is used in outdoor applications, mainte...展开 Razeen® LR 2310 is a hydrogenated Bisphenol A based cycloaliphatic epoxy resin. This product is characterized by its UV resistance. It has an epoxy equivalent weight of 130-150 and a denisty of 1.17. Razeen® LR 2310 is used in outdoor applications, maintenance coatings, decorative paints, and acrylic finishes. 收起 | |
| Razeen® LR 2350 | Jubail Chemical Industries Co. | Razeen® LR 2350 is a general purpose, modified epoxy resin based on Bisphenol A and F. This product is characterized by its ability to improve chemical resistance and mechanical properties in end products. Razeen® LR 2350 is used in solvent-free coatings. | |
| Razeen® LR 2351 | Jubail Chemical Industries Co. | Razeen® LR 2351 is a general purpose, modified epoxy resin based on Bisphenol A and Bisphenol F. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2351 is used in the formulation of solvent-free coatings. | |
| Razeen® LR 2352 | Jubail Chemical Industries Co. | Razeen® LR 2352 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its adhesion properties. It has an epoxy equivalent weight of 170-185 and a denisty of 1.17. Razeen® LR 2352 is used in solvent-free and high solids coati...展开 Razeen® LR 2352 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its adhesion properties. It has an epoxy equivalent weight of 170-185 and a denisty of 1.17. Razeen® LR 2352 is used in solvent-free and high solids coatings. 收起 | |
| Razeen® LR 2740 | Jubail Chemical Industries Co. | Razeen® LR 2740 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity and that is modified with mono-functional reactive diluent. It has an epoxy equivalent weight of 190-210 and a denisty of 1.14. Razeen® LR 2...展开 Razeen® LR 2740 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity and that is modified with mono-functional reactive diluent. It has an epoxy equivalent weight of 190-210 and a denisty of 1.14. Razeen® LR 2740 is used in high solids coatings and adhesives. 收起 | |
| Razeen® LR 2783 | Jubail Chemical Industries Co. | Razeen® LR 2783 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, processing properties, mechanical properties, surface penetration, and chemical resistance. Razeen® LR 2783 is used in solvent-free coating...展开 Razeen® LR 2783 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, processing properties, mechanical properties, surface penetration, and chemical resistance. Razeen® LR 2783 is used in solvent-free coatings and structural adhesives. 收起 | |
| Razeen® LR 2810 | Jubail Chemical Industries Co. | Razeen® LR 2810 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, reactivity, surface hardness, flexibility, organic solvent resistance, and alkali resistance. Razeen® LR 2810 is used in solvent-free coati...展开 Razeen® LR 2810 is a liquid epoxy resin based on Bisphenol A and F. This product is characterized by its viscosity, reactivity, surface hardness, flexibility, organic solvent resistance, and alkali resistance. Razeen® LR 2810 is used in solvent-free coatings and structural adhesives. 收起 | |
| Razeen® S 7103 | Jubail Chemical Industries Co. | Razeen® S 7103 is a bi-functional aliphatic reactive diluent based on Propylenglycol diglycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 320-450 and a density of 1.04...展开 Razeen® S 7103 is a bi-functional aliphatic reactive diluent based on Propylenglycol diglycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 320-450 and a density of 1.04. Razeen® S 7103 is used in epoxy resin systems. 收起 | |
| Razeen® S 7105 | Jubail Chemical Industries Co. | Razeen® S 7105 is a mono-functional aliphatic reactive diluent based on ortho cresyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 175-190 and a density of 1.06. ...展开 Razeen® S 7105 is a mono-functional aliphatic reactive diluent based on ortho cresyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 175-190 and a density of 1.06. Razeen® S 7105 is used in epoxy resin systems. 收起 | |
| Razeen® S 7106 | Jubail Chemical Industries Co. | Razeen® S 7106 is a mono-functional aliphatic reactive diluent based on C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 300-340 and a density of .89. ...展开 Razeen® S 7106 is a mono-functional aliphatic reactive diluent based on C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 300-340 and a density of .89. Razeen® S 7106 is used in epoxy resin systems. 收起 | |
| Razeen® S 7106 HP | Jubail Chemical Industries Co. | Razeen® S 7106 HP is a mono-functional aliphatic reactive diluent based on high purity C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 270-305 and a d...展开 Razeen® S 7106 HP is a mono-functional aliphatic reactive diluent based on high purity C12-C14 alkyl glycidyl ether. This product is characterized by its ability to increase flexibility in end products. It has an epoxy equivalent weight of 270-305 and a density of .89. Razeen® S 7106 HP is used in epoxy resin systems. 收起 | |
| Razeen® S 7107 | Jubail Chemical Industries Co. | Razeen® S 7107 is a reactive diluent based on 1.4-butane diol diglycidyl ether. This product is characterized by its ability to increase the strength of end products. It has an epoxy equivalent weight of 130-145 and a density of 1.1. Razeen® S 7107 is use...展开 Razeen® S 7107 is a reactive diluent based on 1.4-butane diol diglycidyl ether. This product is characterized by its ability to increase the strength of end products. It has an epoxy equivalent weight of 130-145 and a density of 1.1. Razeen® S 7107 is used in epoxy resin systems. 收起 | |
| Razeen® S 7109 | Jubail Chemical Industries Co. | Razeen® S 7109 is an aliphatic di-functional reactive diluent based on 1.6-hexanediol diglycidyl ether. This product is characterized by its ability to increase the strength and flexibility of end products. It has an epoxy equivalent weight of 150-170 and...展开 Razeen® S 7109 is an aliphatic di-functional reactive diluent based on 1.6-hexanediol diglycidyl ether. This product is characterized by its ability to increase the strength and flexibility of end products. It has an epoxy equivalent weight of 150-170 and a density of 1.06. Razeen® S 7109 is used in epoxy resin systems. 收起 | |
| Razeen® S 93513 | Jubail Chemical Industries Co. | Razeen® S 93513 is a novel mono-functional reactive diluent. This product is characterized by its ability to increase the flexibility of end products. It has an epoxy equivalent weight of 424-575 and a density of 8.17. Razeen® S 93513 is used in solvent-f...展开 Razeen® S 93513 is a novel mono-functional reactive diluent. This product is characterized by its ability to increase the flexibility of end products. It has an epoxy equivalent weight of 424-575 and a density of 8.17. Razeen® S 93513 is used in solvent-free coatings, high solids coatings, marine coatings, industrial coatings, and coatings that come in contact with potable water. 收起 | |
| Razeen® SL 2290 X 90 | Jubail Chemical Industries Co. | Razeen® SL 2290 X 90 is a semi-solid, modified epoxy resin based on Bisphenol A as a solvent cut in 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 2290 X 90 ...展开 Razeen® SL 2290 X 90 is a semi-solid, modified epoxy resin based on Bisphenol A as a solvent cut in 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 2290 X 90 is used in the formulation of primers applied on metal substrates. 收起 | |
| Razeen® SL 2711W57 | Jubail Chemical Industries Co. | Razeen® SL 2711W57 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity and compatibility with a wide variety of different end product formulations. Razeen® SL 2711W57 is used in chemical resist...展开 Razeen® SL 2711W57 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity and compatibility with a wide variety of different end product formulations. Razeen® SL 2711W57 is used in chemical resistant coatings and matrix adhesives. 收起 | |
| Razeen® SL 2733W67 | Jubail Chemical Industries Co. | Razeen® SL 2733W67 is an emulsion of an epoxy resin based on Bisphenol A/F supplied at 67% solids content. This product is characterized by its viscosity, stability, processing properties, mechanical properties, surface penetration, and chemical resistanc...展开 Razeen® SL 2733W67 is an emulsion of an epoxy resin based on Bisphenol A/F supplied at 67% solids content. This product is characterized by its viscosity, stability, processing properties, mechanical properties, surface penetration, and chemical resistance. Razeen® SL 2733W67 is used in water-based paints and enamels. 收起 | |
| Razeen® SL 4071 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4071 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve the mechanical and electrical properties in end products. Razeen® SL 4071 X 75 is us...展开 Razeen® SL 4071 X 75 is a medium molecular weight epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its ability to improve the mechanical and electrical properties in end products. Razeen® SL 4071 X 75 is used in the formulation of acrylic resin systems, marine maintenance, and protective coatings applications. 收起 | |
| Razeen® SL 4072 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4072 X 75 is a typical type 2 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance....展开 Razeen® SL 4072 X 75 is a typical type 2 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4072 X 75 is used in the formulation of primers, anti-corrosive primers, zinc rich primers, top coats, clear lacquers, and quick dry floor coatings. 收起 | |
| Razeen® SL 4150 X 90 | Jubail Chemical Industries Co. | Razeen® SL 4150 X 90 is a semi-solid epoxy resin based on Bisphenol A as a solvent cut 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 4150 X 90 is used in th...展开 Razeen® SL 4150 X 90 is a semi-solid epoxy resin based on Bisphenol A as a solvent cut 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 4150 X 90 is used in the formulation of primers and finishing paints applied on metal substrates and in high solids coatings. 收起 |
