UL Prospector

成功!

成功保存搜索结果
ANTIGEL® Bernd Schwegmann GmbH & Co. KG Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中,也具有上述性能
ANTIGEL® HS Bernd Schwegmann GmbH & Co. KG 具有良好润湿性和分散性的粘度稳定剂,尤其适合高固体份涂料体系,不含酮肟和芳香族化合物,可生物降解
ANTIGEL® KF Bernd Schwegmann GmbH & Co. KG ANTIGEL® KF是一种多功能助剂,适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物,可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀,因而色度深。可减少分散时间、絮凝和沉降现象,提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性,可获得最佳的颜色深度
ANTIGEL® KF-D Bernd Schwegmann GmbH & Co. KG Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中
AquaFLON® 178G (PTFE / Synthetic Wax Aqueous Dispersion) Shamrock Technologies, Inc. 三叶科技 AquaFLON® 178G is PTFE (polytetrafluoroethylene) and synthetic wax and in an aqueous dispersion. AquaFLON® 178G is recommended for water-based industrial coatings.
AquaFLON® 50 (PTFE Aqueous Dispersion) Shamrock Technologies, Inc. 三叶科技 AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 ...展开 AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. 收起
AquaFLON® 52 (PTFE Dispersion) Shamrock Technologies, Inc. 三叶科技 AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for water-based specialty coatings.
AquaFLON® 605 (PTFE / Synthetic Wax Aqueous Dispersion) Shamrock Technologies, Inc. 三叶科技 AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical synthetic wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in coatings.
AquaFLON® 797 (PTFE and Synthetic Wax Aqueous Dispersion) Shamrock Technologies, Inc. 三叶科技 AquaFLON® 797 is PTFE (polytetrafluoroethylene) and synthetic wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for a wide variety of water based industrial coatings, wood finishes, and composite treatments.
AquaFLON® MG (PTFE / Carnauba Wax Aqueous Dispersion) Shamrock Technologies, Inc. 三叶科技 AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion.
BLISTER FREE 3 Bernd Schwegmann GmbH & Co. KG Blister Free 3可用于含溶剂和水稀释体系。在含溶剂体系中,Blister Free 3作为消泡剂尤为有效,也可部分作为流平剂。它适用于以下基料:醇酸、醇酸/聚酯-、不饱和聚酯-、NC-、AC-、PU和丙烯酸体系。Blister Free 3在水稀释涂料体系中也非常有效,尤其是基于醇酸/丙烯酸、饱和聚酯和环氧体系
BLISTER FREE 45 Bernd Schwegmann GmbH & Co. KG Blister Free 45在以下溶剂型体系中具有良好的消泡效果,基于硝基纤维素、酸催化、通用聚氨酯。Blister Free 45对于水稀释涂料也具有非常好的消泡效果,基于以下基料:聚酯、酸性树脂、丙烯酸
BLISTER FREE 54 Bernd Schwegmann GmbH & Co. KG Blister Free 54可有效应用于几乎所有含溶剂单或多组分油漆和涂料体系,包括自干和烘烤醇酸、环氧体系、PU体系、丙烯酸,特殊的应用领域是印刷油墨和卷材涂料体系
BLISTER FREE 55 Bernd Schwegmann GmbH & Co. KG Blister Free 55在各种水性醇酸体系中具有出色的消泡效果,例如那些中和后变水溶性,以及在醇酸乳液中,含或不含助溶剂的。在很多改性醇酸和醇酸/丙烯酸混合体系中也具有非常好的消泡效果
BLISTER FREE 56 Bernd Schwegmann GmbH & Co. KG Blister Free 56 可用于UV固化体系。它可用于下面提到的水稀释体系。Blister Free 56具有良好的消泡效果,它在这些体系:醇酸/丙烯酸油漆、饱和聚酯、环氧中有部分流平功能
BLISTER FREE 66 Bernd Schwegmann GmbH & Co. KG Blister Free 66可作为消泡剂应用于所有常规涂料体系中。Blister Free 66 在基于聚酯、聚氨酯和丙烯酸酯的体系中尤为有效
BLISTER FREE 75 Bernd Schwegmann GmbH & Co. KG Blister Free 75在常规NC体系和NC混合体系、AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡效果。Blister Free 75在基于以下基料:长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有非常好的消泡效果
BLISTER FREE 77 Bernd Schwegmann GmbH & Co. KG 完全消泡是形成一个出色涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷,它也经常会降低光泽和耐水性。Blister Free 77可相当大程度上减少气泡形成,造成强烈消泡,并均一地形成不饱和聚酯蜡层
BLISTER FREE 88 Bernd Schwegmann GmbH & Co. KG Blister Free 88是一种表面活性添加剂,会影响表面张力。该性能可减少在油漆的生产或施工过程中气泡的形成。任何形成的气泡都可被快速摧毁。通常Blister Free 88对涂膜流平具有良好的效果
CeraSPERSE 171 (Wax Dispersion) Shamrock Technologies, Inc. 三叶科技 CeraSPERSE 171 is polyethylene wax compounded in refined linseed oil (VOC-free). CeraSPERSE 171 is recommended for use in UV topcoats.
CeraSPERSE 174 (Wax Dispersion) Shamrock Technologies, Inc. 三叶科技 CeraSPERSE 174 is PTFE (polytetrafluoroethylene) and polyethylene wax compounded in refined linseed oil. CeraSPERSE 171 is recommended for UV topcoats.
CeraSPERSE 31 (Carnauba Wax Compound) Shamrock Technologies, Inc. 三叶科技 CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based...展开 CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based and water-based coatings. 收起
CeraSPERSE 321BG (PTFE / Wax Compound) Shamrock Technologies, Inc. 三叶科技 CeraSPERSE 321BG is a PTFE (polytetrafluoroethylene) and wax compound in Butyl CARBITOL™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems.
CeraSPERSE UV 636 (Carnauba Wax in UV Monomer) Shamrock Technologies, Inc. 三叶科技 CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA.
CeraSPERSE UV 691 (Carnauba Wax in UV Monomer) Shamrock Technologies, Inc. 三叶科技 以二缩三丙二醇二丙烯酸酯为溶剂的25%氧化聚乙烯蜡分散体。在滑爽、耐磨损的同时保持光泽度和透明度。
DHA-101 ANHUI DONGHUI INTERNATIONAL DHA-101 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98%. This product offers covering power, exceptional whiteness, good dispersion, and heating stability in paint applications. It has a specific gravity of 3.8 g/cm3, a refr...展开 DHA-101 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98%. This product offers covering power, exceptional whiteness, good dispersion, and heating stability in paint applications. It has a specific gravity of 3.8 g/cm3, a refractive index of 2.5, an oil absorption of ≤26g/100g, and a pH of 6.5 to 8.5. 收起
DHA-102 ANHUI DONGHUI INTERNATIONAL DHA-102 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98.5%. This product has a coating layer that can be thin and even, with high impacting and mechanical resistance in enamel applications. It has a specific gravity of 3.8 g/...展开 DHA-102 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98.5%. This product has a coating layer that can be thin and even, with high impacting and mechanical resistance in enamel applications. It has a specific gravity of 3.8 g/cm3 and a refractive index of 2.5. 收起
Fluoro P-77 (FEP Powder) Shamrock Technologies, Inc. 三叶科技 Fluoro P-77 is a FEP powder used in applications where release properties are required. Fluoro P77 offers high gloss and smoothness when fused.
FluoroSLIP® 225 (PTFE / Synthetic Wax Blend) Shamrock Technologies, Inc. 三叶科技 FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend.
FluoroSLIP® 421 (PTFE / Synthetic Wax Blend) Shamrock Technologies, Inc. 三叶科技 FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and synthetic wax blend.
FluoroSLIP® 511 (PTFE / Synthetic Wax Blend) Shamrock Technologies, Inc. 三叶科技 一种经过研磨的高分子聚乙烯和聚四氟乙烯混合物,是一种出色的耐磨损和滑爽配方,适用于罐头行业、木材及卷材涂料。
FluoroSLIP® 515 (PTFE / Synthetic Wax Blend) Shamrock Technologies, Inc. 三叶科技 FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and synthetic wax blend.
FluoroSLIP® 533 (PTFE / Synthetic Wax Blend) Shamrock Technologies, Inc. 三叶科技 FluoroSLIP® 533 is a PTFE and hydrophilic synthetic wax blend where the synthetic wax shows a uniform melting range peaking at 97°C.
FluoroSLIP® 605 (PTFE / Synthetic Wax Blend) Shamrock Technologies, Inc. 三叶科技 一种高分子聚乙烯聚四氟乙烯混合物。FluoroSLIP 605具有超强的耐磨性和抗揉搓性,不打滑。
FluoroSLIP® 731MG (PTFE / Synthetic Wax Blend) Shamrock Technologies, Inc. 三叶科技 一种超细颗粒的高熔点蜡合金粉末和聚四氟乙烯混合物。具有提高滑爽度、硬度和防粘连的特性,且抗磨损、抗揉搓。
FluoroTEX 130 (PTFE Powder) Shamrock Technologies, Inc. 三叶科技 FluoroTEX 130 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 130 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and...展开 FluoroTEX 130 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 130 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings. 收起
FluoroTEX 50 (PTFE Powder) Shamrock Technologies, Inc. 三叶科技 FluoroTEX 50 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 50 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and h...展开 FluoroTEX 50 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 50 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings. 收起
FluoroTEX 90 (PTFE Powder) Shamrock Technologies, Inc. 三叶科技 FluoroTEX 90 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 90 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and h...展开 FluoroTEX 90 is an unirradiated polytetrafluoroethylene (PTFE) texturing agent with a mean particle size of 90 microns. The FluoroTEX Series are stable, compatible, and easily dispersed in all solvent, water-based radiation curable, powder, air dry, and high temperature baked coatings. This product is ideal for systems that need high heat resistance, like coil coatings. 收起
Hydrocer 145 (Amide Wax Dispersion) Shamrock Technologies, Inc. 三叶科技 50%合成蜡水性分散体。用于织物、纸张、油墨和金属容器。
Hydrocer 257 (Synthetic Wax Dispersion) Shamrock Technologies, Inc. 三叶科技 Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems.
Hydrocer 357 (Spherical Synthetic Wax Dispersion) Shamrock Technologies, Inc. 三叶科技 50%水性高分子聚乙烯蜡分散体。具有滑度控制和耐磨损的特性,对光泽度有中等程度的影响,是一种非离子型表面活性剂,具备可分散性/相容性,在不使用主体树脂的情况下具有出色的储存稳定性。
Hydrocer 7206 (Synthetic Wax Dispersion) Shamrock Technologies, Inc. 三叶科技 Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems.
Hydrocer DP-69 (Paraffin Wax Microdispersion) Shamrock Technologies, Inc. 三叶科技 Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based coating systems.
Hydrocer EC 98 Shamrock Technologies, Inc. 三叶科技 Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. ...展开 Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. It also provides very good block mar resistance to OPVs and may reduce low temperature cracking. This emulsion can be post-added after letdown using mild agitation. 收起
Hydrocer EE 95 (Synthetic Wax Emulsion) Shamrock Technologies, Inc. 三叶科技 一种阴离子高密度聚乙烯乳液。产品可提高抗磨损性和滑爽性;提高抗划痕、抗移印性及滑动角;满足迅速提高的抗水性要求。
Hydrocer EP 91 (Paraffin Wax Emulsion) Shamrock Technologies, Inc. 三叶科技 石蜡水乳液。用于水性油墨和油漆时具有优异的耐水性。它通过一种独特的的乳化过程制备,不含亲水表面活性剂。
Hydrocer ER 77 (Polypropylene Emulsion) Shamrock Technologies, Inc. 三叶科技 非离子聚乙烯乳液。推荐用作水性油墨和油漆的防滑助剂,可增大滑动角但不降低光泽。
Hydrocer™ 7112 (Synthetic Wax Dispersion) Shamrock Technologies, Inc. 三叶科技 Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems.
Hydropel AF (EBS Wax Powder) Shamrock Technologies, Inc. 三叶科技 Hydropel AF is a micronized EBS (ethylene bisstearamide) wax powder showing multiple melting peaks ranging from 91 – 145°C.
Hydropel GP (Wax Alloy) Shamrock Technologies, Inc. 三叶科技 Hydropel GP is a wax alloy showing multipile melting peaks ranging from 41 – 101°C.
Hydropel QB (Paraffin / Synthetic Wax Blend) Shamrock Technologies, Inc. 三叶科技 一种石蜡和合成蜡的混合物。憎水性可保持两年以上。由于蜡所固有的特性,该产品还可提高滑爽性和耐划伤性,对于沾尘性、光泽度和透明度的影响最小。
KLX 7997 Nokxeller Quimica Ltda KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起
KORRODUR Bernd Schwegmann GmbH & Co. KG Korrodur主要作为一种锈转化助剂应用于常规醇酸树脂涂料中。然而,Korrodur在基于环氧、氯化橡胶或丙烯酸基料的含溶剂油漆中也有良好效果。典型应用:防锈底漆、单层防腐蚀体系、修补面漆
KORRODUR AL 2 Bernd Schwegmann GmbH & Co. KG Korrodur AL 2用于底漆中消除差的基材和差强人意的喷涂条件的影响。Korrodur AL 2可将残留的锈转换成非腐蚀性丹宁酸铁,并提供长期腐蚀保护。如果存在湿气,它会在喷涂过程中乳化进入膜中,干燥时会蒸发。润湿剂可确保对残留锈颗粒、灰尘的良好渗透以及对除油很差的表面的润湿
LA THIX FB Bernd Schwegmann GmbH & Co. KG 可增稠所有常规带极性基团基料的含溶剂体系。尤其适用于高膜厚体系、纹理烤漆、墙面和DIY油漆。主要优势为:液态,因此易添加、耐温、对光泽无负面影响、可防止沉降和流挂
MITTEL S Bernd Schwegmann GmbH & Co. KG Mittel S适用于几乎所有非水性体系,可高效应用于醇酸(自干)、醇酸/聚酯(热固化)、氯化橡胶、环氧、聚氨酯、热塑性丙烯酸和反应性丙烯酸体系
NKX 144 Nokxeller Quimica Ltda NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起
NKX 176 Nokxeller Quimica Ltda NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起
NKX 183 Nokxeller Quimica Ltda NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起
NKX 201 NMP-Free Nokxeller Quimica Ltda NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起
NKX 240 Nokxeller Quimica Ltda NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance.
NKX 245 Nokxeller Quimica Ltda NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起
NKX 250 Nokxeller Quimica Ltda NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起
NKX 274 Nokxeller Quimica Ltda NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起
NKX 279 Nokxeller Quimica Ltda NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起
NO SED Bernd Schwegmann GmbH & Co. KG 防沉降助剂,适合溶剂型涂料
Neptune 1-N1 (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 Neptune 1-N1 is a medium MW synthetic wax treated to provide water wettability. Neptune 1-N1 is recommended for use in water based coatings.
Neptune 1-N5 (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based, air dry, and baked coatings.
Neptune 5223 (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 Neptune 5223 is a polyethylene wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C. Neptune 5223 is recommended for water based UV coatings.
NonSKID 5389 (Polypropylene Wax) Shamrock Technologies, Inc. 三叶科技 NonSKID 5389 is a micronized, modified polypropylene wax. NonSKID 5389 is used in air dry, baked, and radiation coatings for aqueous, solvent, UV, and powder systems.
PowderTEX 61 (PTFE Powder) Shamrock Technologies, Inc. 三叶科技 PowderTEX 61 is a PTFE (polytetrafluoroethylene) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. PowderTEX 61 is used in baked coatings for powder systems.
PowderTEX 94 (PTFE Powder) Shamrock Technologies, Inc. 三叶科技 高级结晶PTFE,在干混阶段加入,随后挤出。可产生半光桔皮纹理效果。
R-1200 ANHUI DONGHUI INTERNATIONAL R-1200 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥98.2%. This product has a specific gravity of 4.0 g/cm3, an oil absorption of ≤14.5g/100g, and a pH of 7.0 to 8.0. It is commonly used in base paints and road mark paints.
R-1201 ANHUI DONGHUI INTERNATIONAL R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an...展开 R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤17g/100g, and a pH of 6.5 to 8.0. 收起
R-1202 ANHUI DONGHUI INTERNATIONAL R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/c...展开 R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤19g/100g, and a pH of 6.5 to 8.0. 收起
R-1203 ANHUI DONGHUI INTERNATIONAL R-1203 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers exceptional whiteness, good dispersibility, high gloss, and super covering power in wall paints, industrial paints, road mark paints, wall-paper coati...展开 R-1203 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers exceptional whiteness, good dispersibility, high gloss, and super covering power in wall paints, industrial paints, road mark paints, wall-paper coatings, and solvent-based coatings. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. 收起
R-215 ANHUI DONGHUI INTERNATIONAL R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a spec...展开 R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a specific gravity of 3.9 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 8.5. 收起
R-216 ANHUI DONGHUI INTERNATIONAL R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of...展开 R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. 收起
R-219 ANHUI DONGHUI INTERNATIONAL R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific ...展开 R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 9.0. 收起
S-232-N1 (Carnauba / Synthetic Wax Alloy) Shamrock Technologies, Inc. 三叶科技 S-232-N1 is a carnauba and synthetic wax alloy showing melting peaks ranging from 84 – 110°C. S-232-N1 is recommeneded for all clear OPV, water-based, solvent-based, and UV coatings.
S-256-N1 (Carnauba / Synthetic Wax Alloy) Shamrock Technologies, Inc. 三叶科技 S-256-N1 is a carnauba and synthetic wax alloy showing melting peaks ranging from 95 – 113°C. . S-256-N1 is recommned in all clear OPV, water-based, solvent-based, and UV coatings.
S-275 (Synthetic Wax Blend) Shamrock Technologies, Inc. 三叶科技 S-275 is a synthetic wax blend that has components showing melting peaks ranging from 83 – 125°C. S-275 is used in both air dry and baked coatings for solvent and aqueous systems.
S-363 (Synthetic Wax Alloy) Shamrock Technologies, Inc. 三叶科技 一种微粉化聚丙烯混合物。是一种去光剂,具有出色的抗磨损、抗划痕和抗指甲刮擦的特性。用于木材、卷材、和工业保养涂料。
S-379-H (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 一种经济型搅拌添加蜡,良好的滑爽度和耐磨度。用于罐头、卷材、粉末、木材和工业涂料。
S-379-N8 (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 S-379-N8 is a synthetic wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-379-N8 is recommended for use in water-based and general purpose industrial coatings.
S-381-N1 (Carnauba / Synthetic Wax Alloy) Shamrock Technologies, Inc. 三叶科技 S-381-N1 is a carnauba and synthetic micronized wax alloy that has a uniform melting range peaking at 91°C. S-381-N1 is also recommened for powder, water-based and UV coating systems.
S-381-N5 (Carnauba / Synthetic Wax Blend) Shamrock Technologies, Inc. 三叶科技 S-381-N5 is a carnauba and synthetic micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommened for powder, water-based and UV coating systems.
S-390-C (Spherical Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 S-390-C is a spherical synthetic wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder.
S-394-MG (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 S-394-MG is a synthetic wax with a DSC melt peak above 110°C. S-394-MG is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings.
S-394-N1 (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 一种熔程窄,低溶解性的聚乙烯蜡粉末。用于提高耐划痕性、再涂性、硬度和抗粘连性。用于罐头、卷材、粉末、木器、工业和UV涂料。
S-394-N5 (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 一种熔程窄,低溶解性的聚乙烯蜡粉末。用于提高耐划痕性、再涂性、硬度和抗粘连性。用于罐头、卷材、粉末、木器、工业和UV涂料。
S-394-SD4 (Spherical Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 S-394-SD4 is a spherical synthetic wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings.
S-395-N2 (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 S-395-N2 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N2 is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings.
S-395-N5 (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 晶态聚乙烯,高熔点、出色的不溶性。用于罐头、卷材、粉末、木材、UV和工业涂料。
S-395-SP5 (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 晶态聚乙烯,高熔点、出色的不溶性。能够提高硬度,改善再涂性、耐磨性和抗粘连性。用于卷材、粉末、木材和工业涂料。
S-400-N1 (EBS Wax Powder) Shamrock Technologies, Inc. 三叶科技 用于薄膜涂布的胺蜡粉末。可用来降低摩擦系数,提高表面离型性,同时对光泽度的影响最小。用于罐头、卷材、木材、纸张和工业涂料。
S-400-N5 (EBS Wax Powder) Shamrock Technologies, Inc. 三叶科技 用于薄膜涂布的胺蜡粉末。可用来降低摩擦系数,提高表面离型性,同时对光泽度的影响最小。用于罐头、卷材、木材、纸张和工业涂料。
S-400-Q (EBS Wax Powder) Shamrock Technologies, Inc. 三叶科技 S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. S-400-Q is recommended for powder, water-based, solvent-based and UV systems.
S-400-SP5 (EBS Wax Powder) Shamrock Technologies, Inc. 三叶科技 用于薄膜涂布的胺蜡粉末。可用来降低摩擦系数,提高表面离型性,同时对光泽度的影响最小。用于罐头、卷材、木材、纸张和工业涂料。
S-413 (Synthetic Wax) Shamrock Technologies, Inc. 三叶科技 S-413 is a synthetic wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for powder coatings, wood coatings, water-based, solvent-based and UV systems