UL Prospector

成功!

成功保存搜索结果
ANTIGEL® Bernd Schwegmann GmbH & Co. KG Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中,也具有上述性能
ANTIGEL® HS Bernd Schwegmann GmbH & Co. KG 具有良好润湿性和分散性的粘度稳定剂,尤其适合高固体份涂料体系,不含酮肟和芳香族化合物,可生物降解
ANTIGEL® KF Bernd Schwegmann GmbH & Co. KG ANTIGEL® KF是一种多功能助剂,适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物,可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀,因而色度深。可减少分散时间、絮凝和沉降现象,提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性,可获得最佳的颜色深度
ANTIGEL® KF-D Bernd Schwegmann GmbH & Co. KG Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中
BLISTER FREE 3 Bernd Schwegmann GmbH & Co. KG Blister Free 3可用于含溶剂和水稀释体系。在含溶剂体系中,Blister Free 3作为消泡剂尤为有效,也可部分作为流平剂。它适用于以下基料:醇酸、醇酸/聚酯-、不饱和聚酯-、NC-、AC-、PU和丙烯酸体系。Blister Free 3在水稀释涂料体系中也非常有效,尤其是基于醇酸/丙烯酸、饱和聚酯和环氧体系
BLISTER FREE 45 Bernd Schwegmann GmbH & Co. KG Blister Free 45在以下溶剂型体系中具有良好的消泡效果,基于硝基纤维素、酸催化、通用聚氨酯。Blister Free 45对于水稀释涂料也具有非常好的消泡效果,基于以下基料:聚酯、酸性树脂、丙烯酸
BLISTER FREE 54 Bernd Schwegmann GmbH & Co. KG Blister Free 54可有效应用于几乎所有含溶剂单或多组分油漆和涂料体系,包括自干和烘烤醇酸、环氧体系、PU体系、丙烯酸,特殊的应用领域是印刷油墨和卷材涂料体系
BLISTER FREE 55 Bernd Schwegmann GmbH & Co. KG Blister Free 55在各种水性醇酸体系中具有出色的消泡效果,例如那些中和后变水溶性,以及在醇酸乳液中,含或不含助溶剂的。在很多改性醇酸和醇酸/丙烯酸混合体系中也具有非常好的消泡效果
BLISTER FREE 56 Bernd Schwegmann GmbH & Co. KG Blister Free 56 可用于UV固化体系。它可用于下面提到的水稀释体系。Blister Free 56具有良好的消泡效果,它在这些体系:醇酸/丙烯酸油漆、饱和聚酯、环氧中有部分流平功能
BLISTER FREE 66 Bernd Schwegmann GmbH & Co. KG Blister Free 66可作为消泡剂应用于所有常规涂料体系中。Blister Free 66 在基于聚酯、聚氨酯和丙烯酸酯的体系中尤为有效
BLISTER FREE 75 Bernd Schwegmann GmbH & Co. KG Blister Free 75在常规NC体系和NC混合体系、AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡效果。Blister Free 75在基于以下基料:长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有非常好的消泡效果
BLISTER FREE 77 Bernd Schwegmann GmbH & Co. KG 完全消泡是形成一个出色涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷,它也经常会降低光泽和耐水性。Blister Free 77可相当大程度上减少气泡形成,造成强烈消泡,并均一地形成不饱和聚酯蜡层
BLISTER FREE 88 Bernd Schwegmann GmbH & Co. KG Blister Free 88是一种表面活性添加剂,会影响表面张力。该性能可减少在油漆的生产或施工过程中气泡的形成。任何形成的气泡都可被快速摧毁。通常Blister Free 88对涂膜流平具有良好的效果
Benox® A-70 UNITED INITIATORS GMBH & CO KG Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-70 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起
Benox® A-75 UNITED INITIATORS GMBH & CO KG Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-75 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起
Benox® A-80 UNITED INITIATORS GMBH & CO KG Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展开 Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-80 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起
Benox® B-50 UNITED INITIATORS GMBH & CO KG Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent...展开 Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B-50 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B50-106 UNITED INITIATORS GMBH & CO KG Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...展开 Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B50-210 UNITED INITIATORS GMBH & CO KG Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...展开 Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B50-230 UNITED INITIATORS GMBH & CO KG Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...展开 Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B50-513 UNITED INITIATORS GMBH & CO KG Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...展开 Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B50-713 UNITED INITIATORS GMBH & CO KG Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...展开 Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B55 UNITED INITIATORS GMBH & CO KG Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...展开 Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B55-107 UNITED INITIATORS GMBH & CO KG Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...展开 Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® B55-108 UNITED INITIATORS GMBH & CO KG Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...展开 Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起
Benox® C-50S UNITED INITIATORS GMBH & CO KG Benox® C-50S, in the form of a fine free-flowing non-caking granular powder, is 50% dibenzoyl peroxide, standardized with silica and phthalate ester plasticizer. It can be used as a cure initiator for acrylic resins and unsaturated polyester resins in bot...展开 Benox® C-50S, in the form of a fine free-flowing non-caking granular powder, is 50% dibenzoyl peroxide, standardized with silica and phthalate ester plasticizer. It can be used as a cure initiator for acrylic resins and unsaturated polyester resins in both ambient temperature and elevated temperature cure processes, in combination with amine accelerators. Benox® C-50S dissolves fast in acrylic resins and unsaturated polyester and is easy to disperse. 收起
Benox® L-40LV UNITED INITIATORS GMBH & CO KG Benox® L-40LV, in the form of a white liquid, is a low viscosity, sprayable dispersion of dibenzoyl peroxide. It is designed for use in curing unsaturated vinyl ester and polyester with low water content, less viscosity drift, and is suitable for the cure...展开 Benox® L-40LV, in the form of a white liquid, is a low viscosity, sprayable dispersion of dibenzoyl peroxide. It is designed for use in curing unsaturated vinyl ester and polyester with low water content, less viscosity drift, and is suitable for the cure of road marking paints based on acrylic resins. 收起
Curox® I-200 UNITED INITIATORS GMBH & CO KG Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...展开 Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起
Curox® I-300 UNITED INITIATORS GMBH & CO KG Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...展开 Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起
Curox® M-100 UNITED INITIATORS GMBH & CO KG Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-102 UNITED INITIATORS GMBH & CO KG Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-103 UNITED INITIATORS GMBH & CO KG Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-104 UNITED INITIATORS GMBH & CO KG Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-180 UNITED INITIATORS GMBH & CO KG Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical sourc...展开 Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. 收起
Curox® M-200 UNITED INITIATORS GMBH & CO KG Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-202 UNITED INITIATORS GMBH & CO KG Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-300 UNITED INITIATORS GMBH & CO KG Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-302 UNITED INITIATORS GMBH & CO KG Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-302R UNITED INITIATORS GMBH & CO KG Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...展开 Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-303 UNITED INITIATORS GMBH & CO KG Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-303R UNITED INITIATORS GMBH & CO KG Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated poly...展开 Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-312 UNITED INITIATORS GMBH & CO KG Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...展开 Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-312R UNITED INITIATORS GMBH & CO KG Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...展开 Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-340 UNITED INITIATORS GMBH & CO KG Curox® M-340, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-340, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® M-403 UNITED INITIATORS GMBH & CO KG Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...展开 Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. 收起
Curox® MCH UNITED INITIATORS GMBH & CO KG Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyest...展开 Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). 收起
Curox® VP-160A UNITED INITIATORS GMBH & CO KG Curox® VP-160A, in the form of a slightly yellowish liquid, is a product that consists of a mixture based on hydroperoxide. It is used in combination with cobalt accelerators as an initiator (radical source) in the curing of unsaturated vinyl ester resins...展开 Curox® VP-160A, in the form of a slightly yellowish liquid, is a product that consists of a mixture based on hydroperoxide. It is used in combination with cobalt accelerators as an initiator (radical source) in the curing of unsaturated vinyl ester resins, coatings, and Novolac resins at ambient temperature. 收起
DHA-101 ANHUI DONGHUI INTERNATIONAL DHA-101 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98%. This product offers covering power, exceptional whiteness, good dispersion, and heating stability in paint applications. It has a specific gravity of 3.8 g/cm3, a refr...展开 DHA-101 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98%. This product offers covering power, exceptional whiteness, good dispersion, and heating stability in paint applications. It has a specific gravity of 3.8 g/cm3, a refractive index of 2.5, an oil absorption of ≤26g/100g, and a pH of 6.5 to 8.5. 收起
DHA-102 ANHUI DONGHUI INTERNATIONAL DHA-102 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98.5%. This product has a coating layer that can be thin and even, with high impacting and mechanical resistance in enamel applications. It has a specific gravity of 3.8 g/...展开 DHA-102 is a white powdered anatase type titanium dioxide, with a TiO2 content of ≥98.5%. This product has a coating layer that can be thin and even, with high impacting and mechanical resistance in enamel applications. It has a specific gravity of 3.8 g/cm3 and a refractive index of 2.5. 收起
KLX 7997 Nokxeller Quimica Ltda KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起
KORRODUR Bernd Schwegmann GmbH & Co. KG Korrodur主要作为一种锈转化助剂应用于常规醇酸树脂涂料中。然而,Korrodur在基于环氧、氯化橡胶或丙烯酸基料的含溶剂油漆中也有良好效果。典型应用:防锈底漆、单层防腐蚀体系、修补面漆
KORRODUR AL 2 Bernd Schwegmann GmbH & Co. KG Korrodur AL 2用于底漆中消除差的基材和差强人意的喷涂条件的影响。Korrodur AL 2可将残留的锈转换成非腐蚀性丹宁酸铁,并提供长期腐蚀保护。如果存在湿气,它会在喷涂过程中乳化进入膜中,干燥时会蒸发。润湿剂可确保对残留锈颗粒、灰尘的良好渗透以及对除油很差的表面的润湿
LA THIX FB Bernd Schwegmann GmbH & Co. KG 可增稠所有常规带极性基团基料的含溶剂体系。尤其适用于高膜厚体系、纹理烤漆、墙面和DIY油漆。主要优势为:液态,因此易添加、耐温、对光泽无负面影响、可防止沉降和流挂
MITTEL S Bernd Schwegmann GmbH & Co. KG Mittel S适用于几乎所有非水性体系,可高效应用于醇酸(自干)、醇酸/聚酯(热固化)、氯化橡胶、环氧、聚氨酯、热塑性丙烯酸和反应性丙烯酸体系
NKX 144 Nokxeller Quimica Ltda NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起
NKX 176 Nokxeller Quimica Ltda NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起
NKX 183 Nokxeller Quimica Ltda NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起
NKX 201 NMP-Free Nokxeller Quimica Ltda NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起
NKX 240 Nokxeller Quimica Ltda NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance.
NKX 245 Nokxeller Quimica Ltda NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起
NKX 250 Nokxeller Quimica Ltda NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起
NKX 274 Nokxeller Quimica Ltda NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起
NKX 279 Nokxeller Quimica Ltda NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起
NO SED Bernd Schwegmann GmbH & Co. KG 防沉降助剂,适合溶剂型涂料
Norox® KP-925H UNITED INITIATORS GMBH & CO KG Norox® KP-925H, in the form of a clear liquid, is a methyl ethyl ketone peroxide composition formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in barrier coatings, gel coats, and corrosion resistant structures. ...展开 Norox® KP-925H, in the form of a clear liquid, is a methyl ethyl ketone peroxide composition formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in barrier coatings, gel coats, and corrosion resistant structures. It is also a good cure initiator for both vinyl ester resins and unsaturated polyester resins. 收起
Norox® KP-9H UNITED INITIATORS GMBH & CO KG Norox® KP-9H, in the form of a clear colorless liquid, is a methyl ethyl ketone peroxide in phlegmatizer for the curing of unsaturated polyester resins at ambient temperature in grouping with cobalt accelerators. It gives consistent room temperature perfo...展开 Norox® KP-9H, in the form of a clear colorless liquid, is a methyl ethyl ketone peroxide in phlegmatizer for the curing of unsaturated polyester resins at ambient temperature in grouping with cobalt accelerators. It gives consistent room temperature performance with both gel coats and resins. 收起
Norox® MEC UNITED INITIATORS GMBH & CO KG Norox® MEC, in the form of a water white liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer and has applications in gel coats. It was developed to give good cure performance in low and average temperature cond...展开 Norox® MEC, in the form of a water white liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer and has applications in gel coats. It was developed to give good cure performance in low and average temperature conditions when used as an initiator with unsaturated polyester resins. 收起
Norox® MEC FRED UNITED INITIATORS GMBH & CO KG Norox® MEC FRED, in the form of a water white liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer and has applications in gel coats. It was developed to give good cure performance in low and average temperature...展开 Norox® MEC FRED, in the form of a water white liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer and has applications in gel coats. It was developed to give good cure performance in low and average temperature conditions when used as an initiator with unsaturated polyester resins. 收起
Norox® MEC RED UNITED INITIATORS GMBH & CO KG Norox® MEC RED, in the form of a colorless liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer. It was developed to give good sure performance in low and average temperature conditions when used as an initiator...展开 Norox® MEC RED, in the form of a colorless liquid, is a solution of cyclohexanone peroxide and methyl ethyl ketone peroxide in phlegmatizer. It was developed to give good sure performance in low and average temperature conditions when used as an initiator with unsaturated polyester resins and gel coats. 收起
Norox® MEKP-9 UNITED INITIATORS GMBH & CO KG Norox® MEKP-9, in the form of a colorless and clear liquid, is methyl ethyl ketone peroxide in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature, in combination with cobalt accelerators. It gives consistent room temperatur...展开 Norox® MEKP-9, in the form of a colorless and clear liquid, is methyl ethyl ketone peroxide in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature, in combination with cobalt accelerators. It gives consistent room temperature performance with both gel coats and resins. 收起
Norox® MEKP-9 FRED UNITED INITIATORS GMBH & CO KG Norox® MEKP-9 FRED, in the form of a colorless and clear liquid, is methyl ethyl ketone peroxide in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature, in combination with cobalt accelerators. It gives consistent room tempe...展开 Norox® MEKP-9 FRED, in the form of a colorless and clear liquid, is methyl ethyl ketone peroxide in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature, in combination with cobalt accelerators. It gives consistent room temperature performance with both gel coats and resins. 收起
Norox® MEKP-9 RED UNITED INITIATORS GMBH & CO KG Norox® MEKP-9 RED, in the form of a red liquid, is a general-purpose cure initiator for the room temperature cure of polyester resins. It gives consistent room temperature performance as a curing agent for both gel coats and resins.
Norox® MEKP-925H UNITED INITIATORS GMBH & CO KG Norox® MEKP-925H, in the form of a water white liquid, is a methyl ethyl ketone peroxide composition formulated to be an excellent cure initiator for both vinyl ester resins and unsaturated polyester resins. It is specifically formulated to reduce gas gen...展开 Norox® MEKP-925H, in the form of a water white liquid, is a methyl ethyl ketone peroxide composition formulated to be an excellent cure initiator for both vinyl ester resins and unsaturated polyester resins. It is specifically formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in barrier coatings, corrosion resistant structures, and gel coats. 收起
Norox® Pulcat S UNITED INITIATORS GMBH & CO KG Norox® Pulcat S, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturate...展开 Norox® Pulcat S, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. 收起
R-1200 ANHUI DONGHUI INTERNATIONAL R-1200 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥98.2%. This product has a specific gravity of 4.0 g/cm3, an oil absorption of ≤14.5g/100g, and a pH of 7.0 to 8.0. It is commonly used in base paints and road mark paints.
R-1201 ANHUI DONGHUI INTERNATIONAL R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an...展开 R-1201 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92%. This product offers exceptional whiteness, good dispersibility, and high weatherability in paint and printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤17g/100g, and a pH of 6.5 to 8.0. 收起
R-1202 ANHUI DONGHUI INTERNATIONAL R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/c...展开 R-1202 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers covering power, exceptional whiteness, high gloss, good dispersibility, and high weatherability in printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤19g/100g, and a pH of 6.5 to 8.0. 收起
R-1203 ANHUI DONGHUI INTERNATIONAL R-1203 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers exceptional whiteness, good dispersibility, high gloss, and super covering power in wall paints, industrial paints, road mark paints, wall-paper coati...展开 R-1203 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93%. This product offers exceptional whiteness, good dispersibility, high gloss, and super covering power in wall paints, industrial paints, road mark paints, wall-paper coatings, and solvent-based coatings. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. 收起
R-215 ANHUI DONGHUI INTERNATIONAL R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a spec...展开 R-215 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥92.5%. This product offers exceptional whiteness and super covering power in solvent-based coatings, latex paints for indoor and outdoor walls, and printing inks. It has a specific gravity of 3.9 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 8.5. 收起
R-216 ANHUI DONGHUI INTERNATIONAL R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of...展开 R-216 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥93.5%. This product offers exceptional whiteness, high gloss, and high weatherability in wall paints, industrial paints, and surface printing inks. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤20g/100g, and a pH of 6.5 to 8.0. 收起
R-219 ANHUI DONGHUI INTERNATIONAL R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific ...展开 R-219 is a white powdered rutile type titanium dioxide with a TiO2 content of ≥90%. This product offers exceptional whiteness, high gloss, super covering powder, good dispersibility, and high weatherability in printing ink applications. It has a specific gravity of 4.0 g/cm3, an oil absorption of ≤21g/100g, and a pH of 6.0 to 9.0. 收起
SCHWEGO FOAM EL 2013 Bernd Schwegmann GmbH & Co. KG SCHWEGO FOAM EL 2013是一种用于溶剂型涂料系统的消泡剂。它可以减少表面张力,所以可以在多数溶剂型系统中显示高消泡能力。它可以在生产和应用过程中破坏泡沫。小量使用SCHWEGO FOAM EL 2013就可以防止泡沫在烤瓷和烘漆过程中产生。这款产品几乎适用于所有溶剂型系统,罐头涂料,醇酸树脂(风干),醇酸树脂/聚酯(热烘干),氯化橡胶,环氧化物,聚氨酯,热塑性丙烯酸和反应性丙烯酸树脂系统。
SCHWEGO ® Pur 8051 Bernd Schwegmann GmbH & Co. KG Schwego® Pur 8051是一种非离子型增稠剂,能有效改善水性涂料和清漆的流变性能。同时,Schwego®Pur 8051也可以与其它增稠剂配合使用而达到某种特别的效果。这种特别效果也取决于基料的种类。
SCHWEGO® Antimec Bernd Schwegmann GmbH & Co. KG Schwego® Antimec可用于几乎所有常规油漆体系,水性和溶剂型。而防结皮效果只对长油度醇酸树脂体系有效
SCHWEGO® Everlast Bernd Schwegmann GmbH & Co. KG 基于螯合物的铁锈净化系统。轻微浆状的液体,可与中和的铁锈层形成金属有机离子复合物。该逐步形成的、黑色的、非常小巧的保护层可提供长期腐蚀耐久性,由于它含有成膜助剂,同时也是一个完美的底漆
SCHWEGO® Flow 8057 Bernd Schwegmann GmbH & Co. KG Schwego® Flow 8057可用于几乎所有水稀释涂料体系。不存在不相容性问题。
SCHWEGO® Flow 8058 Bernd Schwegmann GmbH & Co. KG Schwego® Flow 8058可用于几乎所有水稀释涂料体系。不存在不相容性问题。Schwego® Flow 8058仅含有水一种挥发性组分,使其特别适合用于无溶剂水稀释体系
SCHWEGO® Flow 8060 Bernd Schwegmann GmbH & Co. KG Schwego® Flow 8060可用于常规含溶剂或无溶剂涂料体系。一般来说,Schwego® Flow 8060对所有基料体系均有效,但它不适合用于水性涂料材料
SCHWEGO® Fluor 6523 Bernd Schwegmann GmbH & Co. KG 高效润湿助剂,用于溶剂型和水性涂料体系,可生物降解,不含PFOS和PFOA,基于C4技术
SCHWEGO® Fluor 6536 Bernd Schwegmann GmbH & Co. KG 高效润湿助剂,用于溶剂型和水性涂料体系,不含PFOS和PFOA,基于环保型C4、C6技术
SCHWEGO® Fluor 6543 Bernd Schwegmann GmbH & Co. KG 高效润湿助剂,用于溶剂型和水性涂料体系,不含PFOS和PFOA,基于环保型C4、C6技术
SCHWEGO® Foam 6303 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6303可用于含溶剂和水稀释体系。在含溶剂体系中,Schwego® Foam 6303作为消泡脱气剂尤为有效,也可部分作为流平剂。适合以下基料:醇酸、醇酸/聚酯、不饱和聚酯、NC-、AC-、PU和聚丙烯酸体系
SCHWEGO® Foam 6325 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6325是一种液体,是所有乳胶漆非常有效的消泡剂,尤其是对于基于苯乙烯/丁二烯乳胶和丙烯酸共聚物的乳胶漆。Schwego® Foam 6325在水中易乳化,不含硅
SCHWEGO® Foam 6343 Bernd Schwegmann GmbH & Co. KG 消泡剂,适合溶剂型涂料体系
SCHWEGO® Foam 6351 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6351可用于几乎所有无溶剂和含溶剂涂料体系。在锤纹罩面漆、建筑涂料、反应性厚涂膜体系、重着色涂料体系和配方中特别有效,适用于无气喷涂。Schwego® Foam 6351在水性工业漆(醇酸/三聚氰胺体系)中也有效果
SCHWEGO® Foam 6354 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6354对几乎所有含溶剂的单和多组分油漆和涂料体系都有效。它的主要组成为:自干和烘烤醇酸、环氧体系、PU体系和丙烯酸
SCHWEGO® Foam 6356 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6356是一种界面活性产品,可抑制空气附着,并在涂膜干燥前摧毁气泡。因而可阻止缩孔形成。涂膜弹性得以提高
SCHWEGO® Foam 6360 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6360是一种带界面活性的产品,可消除UV涂料中吸附空气的形成。也就是说,气泡在涂膜干燥前就被消除。可防止缩孔,促进流平
SCHWEGO® Foam 6361 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6361是一种带有界面活性的产品,可消除UV涂料中吸附空气的形成。也就是说,气泡在涂膜干燥前就被消除。可防止缩孔,促进流平
SCHWEGO® Foam 6375 Bernd Schwegmann GmbH & Co. KG Schwego® Foam 6375在常规NC体系和NC组合体系、 AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡作用。Schwego® Foam 6375在基于以下基料:长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有良好到非常好的消泡效果