| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中，也具有上述性能 | |
| ANTIGEL® HS | Bernd Schwegmann GmbH & Co. KG | 具有良好润湿性和分散性的粘度稳定剂，尤其适合高固体份涂料体系，不含酮肟和芳香族化合物，可生物降解 | |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF是一种多功能助剂，适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物，可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀，因而色度深。可减少分散时间、絮凝和沉降现象，提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性，可获得最佳的颜色深度 | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中 | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | Blister Free 3可用于含溶剂和水稀释体系。在含溶剂体系中，Blister Free 3作为消泡剂尤为有效，也可部分作为流平剂。它适用于以下基料：醇酸、醇酸/聚酯-、不饱和聚酯-、NC-、AC-、PU和丙烯酸体系。Blister Free 3在水稀释涂料体系中也非常有效，尤其是基于醇酸/丙烯酸、饱和聚酯和环氧体系 | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | Blister Free 45在以下溶剂型体系中具有良好的消泡效果，基于硝基纤维素、酸催化、通用聚氨酯。Blister Free 45对于水稀释涂料也具有非常好的消泡效果，基于以下基料：聚酯、酸性树脂、丙烯酸 | |
| BLISTER FREE 54 | Bernd Schwegmann GmbH & Co. KG | Blister Free 54可有效应用于几乎所有含溶剂单或多组分油漆和涂料体系，包括自干和烘烤醇酸、环氧体系、PU体系、丙烯酸，特殊的应用领域是印刷油墨和卷材涂料体系 | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | Blister Free 55在各种水性醇酸体系中具有出色的消泡效果，例如那些中和后变水溶性，以及在醇酸乳液中，含或不含助溶剂的。在很多改性醇酸和醇酸/丙烯酸混合体系中也具有非常好的消泡效果 | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | Blister Free 56 可用于UV固化体系。它可用于下面提到的水稀释体系。Blister Free 56具有良好的消泡效果，它在这些体系：醇酸/丙烯酸油漆、饱和聚酯、环氧中有部分流平功能 | |
| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | Blister Free 66可作为消泡剂应用于所有常规涂料体系中。Blister Free 66 在基于聚酯、聚氨酯和丙烯酸酯的体系中尤为有效 | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | Blister Free 75在常规NC体系和NC混合体系、AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡效果。Blister Free 75在基于以下基料：长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有非常好的消泡效果 | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | 完全消泡是形成一个出色涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷，它也经常会降低光泽和耐水性。Blister Free 77可相当大程度上减少气泡形成，造成强烈消泡，并均一地形成不饱和聚酯蜡层 | |
| BLISTER FREE 88 | Bernd Schwegmann GmbH & Co. KG | Blister Free 88是一种表面活性添加剂，会影响表面张力。该性能可减少在油漆的生产或施工过程中气泡的形成。任何形成的气泡都可被快速摧毁。通常Blister Free 88对涂膜流平具有良好的效果 | |
| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...展开 Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...展开 Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 收起 | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| KORRODUR | Bernd Schwegmann GmbH & Co. KG | Korrodur主要作为一种锈转化助剂应用于常规醇酸树脂涂料中。然而，Korrodur在基于环氧、氯化橡胶或丙烯酸基料的含溶剂油漆中也有良好效果。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| KORRODUR AL 2 | Bernd Schwegmann GmbH & Co. KG | Korrodur AL 2用于底漆中消除差的基材和差强人意的喷涂条件的影响。Korrodur AL 2可将残留的锈转换成非腐蚀性丹宁酸铁，并提供长期腐蚀保护。如果存在湿气，它会在喷涂过程中乳化进入膜中，干燥时会蒸发。润湿剂可确保对残留锈颗粒、灰尘的良好渗透以及对除油很差的表面的润湿 | |
| KRATON® D1101 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...展开 KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...展开 KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...展开 KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, and sealants. 收起 | |
| KRATON® D1101 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wi...展开 KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JSM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JSM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...展开 KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JSZ Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JSZ Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1111 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1111 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...展开 KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...展开 KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...展开 KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1116 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high streng...展开 KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1116 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...展开 KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1117 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range o...展开 KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...展开 KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 KTM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low visco...展开 KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KTM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1119 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1124 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardnes...展开 KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1124 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity...展开 KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1126 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity ...展开 KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1126 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1152 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1152 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 BO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 BO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1155 BO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 BO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1155 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and l...展开 KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1155 JOP Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and ...展开 KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JOP Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1157 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1157 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1157 ETM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness,...展开 KRATON® D1157 ETM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1160 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1160 BT Polymer is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, a...展开 KRATON® D1160 BT Polymer is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1160 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 BO Polymer | Kraton Polymers International Ltd. | KRATON® D1161 BO Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with Calcium Stearate. This product is versatile with a combination of high strength, low ...展开 KRATON® D1161 BO Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with Calcium Stearate. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 BO Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 BSM Polymer | Kraton Polymers International Ltd. | KRATON® D1161 BSM Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low...展开 KRATON® D1161 BSM Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 BSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1161 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, an...展开 KRATON® D1161 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1161 JS Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted crumbs. This product is versatile with a combination of high strength, low hardness, and low viscosity for e...展开 KRATON® D1161 JS Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted crumbs. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 JS Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 JSP Polymer | Kraton Polymers International Ltd. | KRATON® D1161 JSP Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1161 JSP Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 JSP Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1161 JU Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as non-dusted crumbs. This product is versatile with a combination of high strength, low hardness, and low viscosity f...展开 KRATON® D1161 JU Polymer is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as non-dusted crumbs. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 JU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1161 KT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low ...展开 KRATON® D1161 KT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1161 KU Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1161 KU Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1161 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...展开 KRATON® D1161 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1161 PTM Polymer | Kraton Polymers International Ltd. | KRATON® D1161 PTM Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted powder. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1161 PTM Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted powder. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 PTM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1162 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1162 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1162 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1162 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1162 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1162 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1162 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1162 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1163 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1163 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, an...展开 KRATON® D1163 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 15%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1163 JSP Polymer | Kraton Polymers International Ltd. | KRATON® D1163 JSP Polymer is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...展开 KRATON® D1163 JSP Polymer is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 JSP Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1163 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1163 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...展开 KRATON® D1163 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1163 PTM Polymer | Kraton Polymers International Ltd. | KRATON® D1163 PTM Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted powder. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1163 PTM Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted powder. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 PTM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1164 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1164 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1165 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1165 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1170 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1170 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, lo...展开 KRATON® D1170 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1170 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1171 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. 收起 | |
| KRATON® D1173 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1173 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 18%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness...展开 KRATON® D1173 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 18%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1173 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. 收起 | |
| KRATON® D1183 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1183 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, an...展开 KRATON® D1183 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1183 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1183 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1183 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...展开 KRATON® D1183 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1183 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1184 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range...展开 KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1184 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1184 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1184 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1184 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1184 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1184 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1184 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1184 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1184 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1184 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 |
