| Agrol® 2.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...展开 Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 收起 | |
| Agrol® 3.0 AO | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...展开 Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). 收起 | |
| Agrol® 3.6 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...展开 Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 收起 | |
| Agrol® 4.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...展开 Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 收起 | |
| Agrol Diamond® | BioBased Technologies | Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (...展开 Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (ASTM D6866) and 70% primary hydroxyl groups. 收起 | |
| Agrol Platinum™ | BioBased Technologies | Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ conta...展开 Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ contains 80.8% bio-based content (ASTM D6866) and Three functional primary hydroxyl groups containing polyol. 收起 | |
| Agrol Prime™ A-110 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weigh...展开 Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weight polyol and 67% primary hydroxyl groups. 收起 | |
| Agrol Prime™ A-56 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight...展开 Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight polyol and 67% primary hydroxyl groups. 收起 | |
| ALBACAR® 5970 | Specialty Minerals | ALBACAR® 5970 is a mineral additive which has a narrow particle size distribution. This product has an oil absorption of 50 and a specific gravity of 2.7. ALBACAR® 5970 is used as a filler in paints, adhesives, sealants, caulks, and plastics. | |
| ALBACAR® 8101 | Specialty Minerals | ALBACAR® 8101 is a mineral additive which has a narrow particle size distribution. This product has an oil absorption of 36 and a specific gravity of 2.7. ALBACAR® 8101 is used as a filler in paints, adhesives, sealants, caulks, and plastics. | |
| ALBAFIL® | Specialty Minerals | ALBAFIL® is a fine, pure precipitated calcium carbonate which has a precisely controlled particle size and a narrow distribution. This product has an average particle size of 0.7 microns and a specific gravity of 2.7. ALBAFIL® is used in paints and coatin...展开 ALBAFIL® is a fine, pure precipitated calcium carbonate which has a precisely controlled particle size and a narrow distribution. This product has an average particle size of 0.7 microns and a specific gravity of 2.7. ALBAFIL® is used in paints and coatings. 收起 | |
| Bensub 2908 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Bensub 2908 is a white powder and a degassing agent that has a density of 0.93. This product can reduce particulates on cured film, and is commonly used for interior and exterior powder coatings. | |
| Bensub 2999 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Bensub 2999 is a white powder and a high-performance degassing agent that has a softening point of 95-115°C. This product has good discoloration resistance and is commonly used for interior and exterior powder coatings. | |
| CALOFORT® S | Specialty Minerals | CALOFORT® S is a white, stearate coated, microcystalline powder which has a high surface area, controlled particle shape, and high whiteness. This product has an average particle size of 0.07 microns and a coating level of between 2.7 and 3.3 percent. CAL...展开 CALOFORT® S is a white, stearate coated, microcystalline powder which has a high surface area, controlled particle shape, and high whiteness. This product has an average particle size of 0.07 microns and a coating level of between 2.7 and 3.3 percent. CALOFORT® S is easily broken down and is used in paints. 收起 | |
| CALOFORT® U | Specialty Minerals | CALOFORT® U is a white, microcrystalline powder which has a high surface area and a controlled particle shape. This product has a surface area of between 17 and 29 m2/grams and an average particle size of 0.07 microns. CALOFORT® U is used in paint, coatin...展开 CALOFORT® U is a white, microcrystalline powder which has a high surface area and a controlled particle shape. This product has a surface area of between 17 and 29 m2/grams and an average particle size of 0.07 microns. CALOFORT® U is used in paint, coatings, sealants, and inks. 收起 | |
| CALOPAKE® F | Specialty Minerals | CALOPAKE® F is a micro-crystalline. white powder which has a high chemical purity. This product has an apparent density of between 0.43 and 0.53 g/ml and has a controlled particle shave and particle size distribution. CALOPAKE® F is used in paints and ink...展开 CALOPAKE® F is a micro-crystalline. white powder which has a high chemical purity. This product has an apparent density of between 0.43 and 0.53 g/ml and has a controlled particle shave and particle size distribution. CALOPAKE® F is used in paints and inks. 收起 | |
| MARBLEWHITE® MW200 | Specialty Minerals | MARBLEWHITE® MW200 is a limestone product which is a high purity calcium carbonate. This product has an oil absorption of 12 and a bulk density of 0.8 g/cc. MARBLEWHITE® MW200 provides brightness and controlled particle size to paints and coatings. | |
| MARBLEWHITE® MW300 | Specialty Minerals | MARBLEWHITE® MW300 is a limestone product which is a high purity calcium carbonate. This product has an oil absorption of 13 and a bulk density of 0.77 g/cc. MARBLEWHITE® MW300 provides brightness and controlled particle size to paints and coatings. | |
| MARBLEWHITE® MW325 | Specialty Minerals | MARBLEWHITE® MW325 is a limestone product which is a high purity calcium carbonate. This product has an oil absorption of 15 and a bulk density of 0.72 g/cc. MARBLEWHITE® MW325 provides brightness and controlled particle size to paints and coatings. | |
| MatteX-3 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | MatteX-3 is a white or light yellow powder that is a reactive matting agent derived from carboxyl-function acrylic resin for use in polyester/epoxy hybrid powder coatings. This product has a softening point of 100-125°C, good matting performance, and good...展开 MatteX-3 is a white or light yellow powder that is a reactive matting agent derived from carboxyl-function acrylic resin for use in polyester/epoxy hybrid powder coatings. This product has a softening point of 100-125°C, good matting performance, and good color stability. 收起 | |
| MatteX-8 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | MatteX-8 is a white or light yellow powder that is a novel matting agent for use in polyester/epoxy hybrid powder coatings. This product has a softening point of 100-125°C, good mechanical properties, and good color stability. | |
| MICROTALC ® 50-26 | Specialty Minerals | MICROTALC® 50-26 is a general purpose talc product which has a median particle size of 8 microns. This product has a pH value of 8.8 and a density of 2.8. MICROTALC® 50-26 is used in sealants, caulks, joint compounds, spackles, and texture coats. | |
| MICROTALC ® 70-22 | Specialty Minerals | MICROTALC ® 70-22 is a general purpose talc product which has a median particle size of 7 microns. This product has a dry brightness or between 76 and 85 and a bulk density of 27 pounds/ft2. MICROTALC ® 70-22 is used in sealants, caulks, joint compounds, ...展开 MICROTALC ® 70-22 is a general purpose talc product which has a median particle size of 7 microns. This product has a dry brightness or between 76 and 85 and a bulk density of 27 pounds/ft2. MICROTALC ® 70-22 is used in sealants, caulks, joint compounds, spackles, and texture coats. 收起 | |
| Mild-Matte A9 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Mild-Matte A9 is a white or light yellow powder that is an effective matting agent for use in polyester/TGIC powder coatings. This product has a softening point of 100-125°C and good weather resistance. | |
| Multifex-MM® Uncoated | Specialty Minerals | Multifex-MM® Uncoated is and ultra-fine calcium carbonate which has a rhombic particle shape. This product has an oil absorption of 26 and a specific gravity of 2.71. Multifex-MM® Uncoated is used in paints, coatings, adhesives, and sealants. | |
| PriMat A5 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | PriMat A5 is a white or light yellow powder that is a novel matting agent for use in polyester/β-hydroxyalkylamide (HAA) based powder coatings. This product has a softening point of 95-120°C, and good mechanical and chemical resistance. | |
| SERICRON® 2M | Specialty Minerals | SERICRON® 2M is a talc product which has a high chemical resistance. This product has an oil absorption of 22 and a bulking value of 23.3. SERICRON® 2M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
| SERICRON® 3M | Specialty Minerals | SERICRON® 3M is a talc product which has a high chemical resistance. This product has an oil absorption of 24 and a median particle size of 8 microns. SERICRON® 3M is used in construction products such as joint compound, adhesives, sealants, putties, and ...展开 SERICRON® 3M is a talc product which has a high chemical resistance. This product has an oil absorption of 24 and a median particle size of 8 microns. SERICRON® 3M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. 收起 | |
| SERICRON® 4M | Specialty Minerals | SERICRON® 4M is a talc product which has a high chemical resistance. This product has an oil absorption of 30 and a median particle size of 4 microns. SERICRON® 4M is used in construction products such as joint compound, adhesives, sealants, putties, and ...展开 SERICRON® 4M is a talc product which has a high chemical resistance. This product has an oil absorption of 30 and a median particle size of 4 microns. SERICRON® 4M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. 收起 | |
| SERICRON® 5M | Specialty Minerals | SERICRON® 5M is a talc product which has a high chemical resistance. This product has an oil absorption of 36 and a density of 2.8. SERICRON® 5M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
| SERICRON® 6M | Specialty Minerals | SERICRON® 6M is a talc product which has a high chemical resistance. This product has an oil absorption of 39 and a pH value of 8.8. SERICRON® 6M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
| STRUCAL® F | Specialty Minerals | STRUCAL® F is a micro-crystalline white powder which has a controlled particle shape and size. This product has an apparent density of between 0.32 and 0.43 g/ml and has a high chemical purity. STRUCAL® F is used in paints and inks. | |
| TALCRON® MP 10-52 | Specialty Minerals | TALCRON® MP 10-52 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1 micron and an oil absorption of 55. TALCRON® MP 10-52 is used in paint, coatings, adhesives, and sea...展开 TALCRON® MP 10-52 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1 micron and an oil absorption of 55. TALCRON® MP 10-52 is used in paint, coatings, adhesives, and sealants. 收起 | |
| TALCRON® MP 12-50 | Specialty Minerals | TALCRON® MP 12-50 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1.2 microns and an oil absorption of 53. TALCRON® MP 12-50 is used in paint, coatings, adhesives, and ...展开 TALCRON® MP 12-50 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1.2 microns and an oil absorption of 53. TALCRON® MP 12-50 is used in paint, coatings, adhesives, and sealants. 收起 | |
| TALCRON® MP 15-38 | Specialty Minerals | TALCRON® MP 15-38 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 2 microns and an oil absorption of 42. TALCRON® MP 15-38 is used in paint, coatings, adhesives, and se...展开 TALCRON® MP 15-38 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 2 microns and an oil absorption of 42. TALCRON® MP 15-38 is used in paint, coatings, adhesives, and sealants. 收起 | |
| TALCRON® MP 30-36 | Specialty Minerals | TALCRON® MP 30-36 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 3 microns and an oil absorption of 34. TALCRON® MP 30-36 is used in paint, coatings, adhesives, and se...展开 TALCRON® MP 30-36 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 3 microns and an oil absorption of 34. TALCRON® MP 30-36 is used in paint, coatings, adhesives, and sealants. 收起 | |
| TALCRON® MP 40-27 | Specialty Minerals | TALCRON® MP 40-27 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 4 microns and an oil absorption of 30. TALCRON® MP 40-27 is used in paint, coatings, adhesives, and se...展开 TALCRON® MP 40-27 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 4 microns and an oil absorption of 30. TALCRON® MP 40-27 is used in paint, coatings, adhesives, and sealants. 收起 | |
| TALCRON® MP 44-26 | Specialty Minerals | TALCRON® MP 44-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 5 microns and an oil absorption of 28. TALCRON® MP 44-26 is used in paint, coatings, adhesives, and se...展开 TALCRON® MP 44-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 5 microns and an oil absorption of 28. TALCRON® MP 44-26 is used in paint, coatings, adhesives, and sealants. 收起 | |
| TALCRON® MP 45-26 | Specialty Minerals | TALCRON® MP 45-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 8 microns and an oil absorption of 26. TALCRON® MP 45-26 is used in paint, coatings, adhesives, and se...展开 TALCRON® MP 45-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 8 microns and an oil absorption of 26. TALCRON® MP 45-26 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Thixo-Carb® 300 | Specialty Minerals | Thixo-Carb® 300 is a surface treated, ultra-fine precipitated calcium carbonate which has a narrow distribution and controlled particle size. This product has a surface area of 12 m2/ grams and an average particle size of 0.15 microns. Thixo-Carb® is used...展开 Thixo-Carb® 300 is a surface treated, ultra-fine precipitated calcium carbonate which has a narrow distribution and controlled particle size. This product has a surface area of 12 m2/ grams and an average particle size of 0.15 microns. Thixo-Carb® is used in high performance sealant systems. 收起 | |
| Thixo-Carb® 500 | Specialty Minerals | Thixo-Carb® 500 is a surface coated, ultra-fine precipitated calcium carbonate which has a uniform particle size. This product has a surface area of 9.8 m2/grams and specific gravity 2.7. Thixo-Carb® 500 is used in epoxy and butyl polymeric sealant system...展开 Thixo-Carb® 500 is a surface coated, ultra-fine precipitated calcium carbonate which has a uniform particle size. This product has a surface area of 9.8 m2/grams and specific gravity 2.7. Thixo-Carb® 500 is used in epoxy and butyl polymeric sealant systems. 收起 | |
| ULTRA-PFLEX® | Specialty Minerals | ULTRA-PFLEX® is a nano-sized, surface treated, high quality precipitated calcium carbonate which has a narrow particle size distribution. This product has an average particle size of 0.07 and a surface area of 19 m2/grams. ULTRA-PFLEX® improves performanc...展开 ULTRA-PFLEX® is a nano-sized, surface treated, high quality precipitated calcium carbonate which has a narrow particle size distribution. This product has an average particle size of 0.07 and a surface area of 19 m2/grams. ULTRA-PFLEX® improves performance properties to paint, coatings, adhesives, and sealants. 收起 | |
| VICRON® 15-15 | Specialty Minerals | VICRON® 15-15 is a mineral additive which consists of limestone and quartz. This product has an average particle size 3.5 microns and an oil absorption of 20 percent. VICRON® 15-15 provides a controlled particle size and a low surface area to paints and c...展开 VICRON® 15-15 is a mineral additive which consists of limestone and quartz. This product has an average particle size 3.5 microns and an oil absorption of 20 percent. VICRON® 15-15 provides a controlled particle size and a low surface area to paints and coatings. 收起 | |
| VICRON® 25-11 | Specialty Minerals | VICRON® 25-11 is a mineral additive which consists of limestone and quartz. This product has an average particle size 5.5 microns and an oil absorption of 18 percent. VICRON® 25-11 provides a controlled particle size and a low surface area to paints and c...展开 VICRON® 25-11 is a mineral additive which consists of limestone and quartz. This product has an average particle size 5.5 microns and an oil absorption of 18 percent. VICRON® 25-11 provides a controlled particle size and a low surface area to paints and coatings. 收起 | |
| VICRON® 31-6 | Specialty Minerals | VICRON® 31-6 is a mineral additive which consists of limestone and quartz. This product has an average particle size 6.5 microns and an oil absorption of 16 percent. VICRON® 31-6 provides a controlled particle size and a low surface area to paints and coa...展开 VICRON® 31-6 is a mineral additive which consists of limestone and quartz. This product has an average particle size 6.5 microns and an oil absorption of 16 percent. VICRON® 31-6 provides a controlled particle size and a low surface area to paints and coatings. 收起 | |
| VICRON® 41-8 | Specialty Minerals | VICRON® 41-8 is a mineral additive which consists of limestone and quartz. This product has an average particle size 8 microns and a surface area of 1.3 m3/grams. VICRON® 41-8 provides a controlled particle size and a low surface area to paints and coatin...展开 VICRON® 41-8 is a mineral additive which consists of limestone and quartz. This product has an average particle size 8 microns and a surface area of 1.3 m3/grams. VICRON® 41-8 provides a controlled particle size and a low surface area to paints and coatings. 收起 | |
| VICRON® 45-3 | Specialty Minerals | VICRON® 45-3 is a mineral additive which consists of limestone and quartz. This product has an average particle size 10 microns and a surface area of 1.1 m3/grams. VICRON® 45-3 provides a controlled particle size and a low surface area to paints and coati...展开 VICRON® 45-3 is a mineral additive which consists of limestone and quartz. This product has an average particle size 10 microns and a surface area of 1.1 m3/grams. VICRON® 45-3 provides a controlled particle size and a low surface area to paints and coatings. 收起 |
