| Aspartic Acid First Grade | Changzhou Yabang Chemical Co., Ltd. | Aspartic Acid First Grade, in the form of a white crystal or crystalline powder, can be dissolved in acid and alkali solutions. This product has uses in synthetic resins, and has a content of ≥98.0% and a loss on drying of ≤0.25%. | |
| Aspartic Acid Premium Grade | Changzhou Yabang Chemical Co., Ltd. | Aspartic Acid Premium Grade, in the form of a white crystal or crystalline powder, can be dissolved in acid and alkali solutions. This product has uses in synthetic resins, and has a content of ≥98.5% and a loss on drying of ≤0.20%. | |
| Formaldehyde | Nanjing Shuguang Chemical Group | Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to...展开 Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to fabricate formaldehyde-phenolic resins, urea resins, melamine resins, pentaerythritol, and hexamethylenamine. 收起 | |
| Ftalon 27/70 ABT | Galstaff Multiresine S.p.A. | Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film har...展开 Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film hardness (panels can be stacked after 24hrs). 收起 | |
| Ftalon 34/60X | Galstaff Multiresine S.p.A. | Ftalon 34/60X provides good film curing, even with reduced quantity of isocyanates. The cured film is hard, but should be plasitized with Ftalon 42 or 43. Ftalon 34/60X is suitable for nitro varnishes for wood. | |
| Ftalon 45/75 AET 2K-PU saturated polyester | Galstaff Multiresine S.p.A. | Ftalon 45/75 AET 2K-PU is a saturated polyester with fast solvent release for 2K-PU coatings. Ftalon 45's low viscosity allows to formulate high solid coatings with good hardening. | |
| Ftalon TAC | Galstaff Multiresine S.p.A. | Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This prod...展开 Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This product has good resistance to yellowing and the outdoors, gloss retention and extremely low color. 收起 | |
| Ftalon TN/100 | Galstaff Multiresine S.p.A. | Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to ...展开 Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to it's excellent resistance, Ftalon TN/100 is suitable for marine applications. 收起 | |
| Fumaric Acid | Changzhou Yabang Chemical Co., Ltd. | Fumaric Acid, in the form of a white crystal, takes the function of antioxidants in many applications.This product has uses in polyester resins, plasticizers, and coatings. It has a melting point of 287-302°C and a moisture content of ≤ 0.25 %. | |
| HC-Poloral P 100/S | Galstaff Multiresine S.p.A. | HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV r...展开 HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV roller basecoats. This product has excellent stability, although it's high reactivity. 收起 | |
| HELLUTEL™ HEC HR 1000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardan...展开 HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 3000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 4000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 300 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant,...展开 HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 5000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| Hydroxypropyl Starch Ether | Shandong Yiteng Chemical Limited Liability Company | Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including ad...展开 Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including adhesives, coating or organic liquids for building materials. 收起 | |
| Italester 205 | Galstaff Multiresine S.p.A. | Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude...展开 Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude steel, galvanized and on aluminum. It complies with European legislation for indirect food contract (Swiss Ordinance RS 817.023.21 Annexx 6, Part A or B). 收起 | |
| Italester 218 SND | Galstaff Multiresine S.p.A. | Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for alum...展开 Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for aluminum). Italester 218 SND provides excellent chemical resistance and flexibility in combination with HMMM resins (Itamin HM). 收起 | |
| Italester H27 | Galstaff Multiresine S.p.A. | Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retensio...展开 Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retension. 收起 | |
| Italester MX 353 | Galstaff Multiresine S.p.A. | Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemica...展开 Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemical resistances. 收起 | |
| Italkid 268 | Galstaff Multiresine S.p.A. | Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for th...展开 Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for the preparation of polyurethane lacquers for wood. 收起 | |
| Italkid 312 F | Galstaff Multiresine S.p.A. | Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Ur...展开 Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Uronal NL, Uronal NL 100). 收起 | |
| Italkid F 51 P | Galstaff Multiresine S.p.A. | Italkid F 51 P is an alkid resin for pigmented pastes that are organic or inorganic. It is suitable for pastes with good wetting properties, high pigment yield and colorimetric stability. | |
| Italkid KR 543 | Galstaff Multiresine S.p.A. | Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent ...展开 Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent release and long pot-life. 收起 | |
| Italkid MR 950 | Galstaff Multiresine S.p.A. | Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thi...展开 Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thick layer, in vertical applications. 收起 | |
| Itamin BG 142 | Galstaff Multiresine S.p.A. | Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and ...展开 Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and is more flexible than BG 141. 收起 | |
| Itamin M 172 | Galstaff Multiresine S.p.A. | Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyest...展开 Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyesters. Itamin M 172 provides high brightness and good flow, good sterilization and chemical resistance, high reactivity and low free formaldehyde. 收起 | |
| Itamin U 34 | Galstaff Multiresine S.p.A. | Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood fl...展开 Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood floors. Itamin U 34's main features are: fast reactivity, long shelf life, low formaldehyde release and very good flow. 收起 | |
| Itamin URP 91 | Galstaff Multiresine S.p.A. | Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and t...展开 Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and toughness, fast hardening, with weak acids and good mechanical,chemical and abrasion resistance. 收起 | |
| KH-540 (SG-Si 1110) | Nanjing Shuguang Chemical Group | KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be us...展开 KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-550 (SG-Si 1100) | Nanjing Shuguang Chemical Group | KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in ...展开 KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-560 (SG-Si 187) | Nanjing Shuguang Chemical Group | KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It ...展开 KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It can also improve the cohesive force of acrylic latex, sealants, polyurethanes, and epoxy resins for glass sealants. 收起 | |
| KH-570 (SG-Si 174) | Nanjing Shuguang Chemical Group | KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under ...展开 KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under dry or hygrometric conditions. 收起 | |
| Maleic Anhydride | Changzhou Yabang Chemical Co., Ltd. | Maleic Anhydride, in the form of white flakes, is soluble in ethanol, ether, and acetone. This product has uses in polyester resins, and has a crystal point of ≥52.4°C and an iron content of ≤ 5ppm. | |
| MELLUTEL™ YL 1500E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 1500E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YL 1500E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 1500E finds application in cement render and cement tile adhesives. 收起 | |
| MELLUTEL™ YL 800E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 800E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YL 800E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 800E finds application in tile grouts. 收起 | |
| MELLUTEL™ YL 8E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 8E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™...展开 MELLUTEL™ YL 8E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 8E finds application in gypsum plaster, gypsum join filler, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 10WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 10WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM 10WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 10WM finds application in gypsum plaster, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 10WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 10WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 10WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 10WMS finds application in dispersion tile adhesives, detergent, and waterborne paint. 收起 | |
| MELLUTEL™ YM 15WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 15WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM 15WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 15WM finds application in ETICS/EIFS, cement tile adhesive, and dispersion tile adhesive. 收起 | |
| MELLUTEL™ YM 15WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 15WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 15WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 15WMS finds application in ETICS/EIFS, cement tile adhesives, dispersion tile adhesives, detergent, and waterborne paint. 收起 | |
| MELLUTEL™ YM 20WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM20 WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM20 WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 20WM finds application in ETICS/EIFS and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 20WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 20WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 20WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 20WMS finds application in dispersion tile adhesives. 收起 | |
| MELLUTEL™ YT 40M | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YT 40M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL...展开 MELLUTEL™ YT 40M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YT 40M finds application in gypsum plaster, gypsum join filler, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YT 70M | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YT 70M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL...展开 MELLUTEL™ YT 70M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YT 70M finds application in gypsum plaster, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| NDZ-101 | Nanjing Shuguang Chemical Group | NDZ-101, in the form of a viscous, claret-colored liquid, is a titanate coupling agent. This product can be used in coatings as a rheology modifier and to increase the usage of fillers within the system. It can also be used to treat inorganic fillers in...展开 NDZ-101, in the form of a viscous, claret-colored liquid, is a titanate coupling agent. This product can be used in coatings as a rheology modifier and to increase the usage of fillers within the system. It can also be used to treat inorganic fillers in order to improve the compatibility between the filler and the resin. 收起 | |
| NDZ-102 | Nanjing Shuguang Chemical Group | NDZ-102, in the form of a viscous liquid with a creamy color, is a titanate coupling agent. This product can be used in alkyd paints, in order to decrease the baking temperature and shorten baking times, so that pigments can disperse and do not settle. ...展开 NDZ-102, in the form of a viscous liquid with a creamy color, is a titanate coupling agent. This product can be used in alkyd paints, in order to decrease the baking temperature and shorten baking times, so that pigments can disperse and do not settle. It can also be used in the baking finish of acrylic paints, in order to disperse filler and keep it from settling as well. 收起 | |
| NDZ-105 | Nanjing Shuguang Chemical Group | NDZ-105, in the form of a viscous claret liquid, is a titanate coupling agent. This product is used in paints to reduce the viscosity of the system. It can also improve the paint's leveling properties and to give the coating layer better wear resistance...展开 NDZ-105, in the form of a viscous claret liquid, is a titanate coupling agent. This product is used in paints to reduce the viscosity of the system. It can also improve the paint's leveling properties and to give the coating layer better wear resistance and corrosion resistance. 收起 | |
| NDZ-131 | Nanjing Shuguang Chemical Group | NDZ-131, in the form of a white to pale yellow soap-like solid, is a titanate coupling agent. This product can be used in paint to increase filler dosage and to decrease viscosity. It can also give the coating anti-abrasion and anti-corrosion properties...展开 NDZ-131, in the form of a white to pale yellow soap-like solid, is a titanate coupling agent. This product can be used in paint to increase filler dosage and to decrease viscosity. It can also give the coating anti-abrasion and anti-corrosion properties. 收起 | |
| NDZ-311 | Nanjing Shuguang Chemical Group | NDZ-311, in the form of a pale yellowish to yellowish-brown clear liquid, is a titanate coupling agent. This product can be used in coatings to improve the dispersion of silica in the system and improve resistance to settling. It can also be used to inc...展开 NDZ-311, in the form of a pale yellowish to yellowish-brown clear liquid, is a titanate coupling agent. This product can be used in coatings to improve the dispersion of silica in the system and improve resistance to settling. It can also be used to increase the dosage of the filler in the coating, and brings with it water-resistant, fire-resistant, and anti-corrosive characteristics. 收起 | |
| NDZ-311w | Nanjing Shuguang Chemical Group | NDZ-311w, in the form of a colorless to red, clear viscous liquid, is a titanate coupling agent. This product can be used in water-based coatings to increase the solid content, its adhesion, its surface gloss, and its chemical resistance. It can also im...展开 NDZ-311w, in the form of a colorless to red, clear viscous liquid, is a titanate coupling agent. This product can be used in water-based coatings to increase the solid content, its adhesion, its surface gloss, and its chemical resistance. It can also improve the tear strength, tensile strength, and aging resistance of the end product. 收起 | |
| NDZ-401 | Nanjing Shuguang Chemical Group | NDZ-401, in the form of a colorless to pale yellow clear liquid, is a titanate coupling agent. This product can be used in epoxy paints that contain high levels of titanium dioxide or clay in order to reduce the dosage of the titanium dioxide and solvent...展开 NDZ-401, in the form of a colorless to pale yellow clear liquid, is a titanate coupling agent. This product can be used in epoxy paints that contain high levels of titanium dioxide or clay in order to reduce the dosage of the titanium dioxide and solvent, to increase the dosage of the clay without changing the viscosity of the system, and to improve the adhesion to glass and metal. It can also be used to treat inorganic fillers like metal powders in order to improve resistance to settling and the dispersion of the filler. 收起 | |
| Poloral G 650 | Galstaff Multiresine S.p.A. | Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usua...展开 Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usually used for both glossy and matt UV topcoats with smooth, clear and hard surface. 收起 | |
| Poloral K 128 | Galstaff Multiresine S.p.A. | Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and ma...展开 Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and marbles. The curing time hardness and the adhesion are peculiar characteristics of Poloral K 128, even at low temperature. 收起 | |
| Poloral UV 92/85 ABT | Galstaff Multiresine S.p.A. | Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding seal...展开 Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding sealer, to be applied by curtain coater. 收起 | |
| R6600 Rutile Titanium Dioxide | Shandong Jinhai Titanium Resources Technology Co., Ltd. | R6600 Rutile Titanium Dioxide is a rutile titanium dioxide pigment that provides good weather resistance, excellent pigment, optical and stable chemical properties, and good hiding strength. This product is commonly used in paints, primers, and road marki...展开 R6600 Rutile Titanium Dioxide is a rutile titanium dioxide pigment that provides good weather resistance, excellent pigment, optical and stable chemical properties, and good hiding strength. This product is commonly used in paints, primers, and road marking paint. It has a titanium dioxide content of ≥98% and a rutile content of ≥97.5%. 收起 | |
| R6618 Rutile Titanium Dioxide | Shandong Jinhai Titanium Resources Technology Co., Ltd. | R6618 Rutile Titanium Dioxide is a zirconium, aluminum and organic surface treated multipurpose rutile titanium dioxide pigment. This product has a narrow-size material distribution, good whiteness and high weather resistance, and it can be applied to coa...展开 R6618 Rutile Titanium Dioxide is a zirconium, aluminum and organic surface treated multipurpose rutile titanium dioxide pigment. This product has a narrow-size material distribution, good whiteness and high weather resistance, and it can be applied to coating, paints and used in ink production. It has a titanium dioxide content of ≥94% and a rutile content of ≥98%. 收起 | |
| R6628 Rutile Titanium Dioxide | Shandong Jinhai Titanium Resources Technology Co., Ltd. | R6628 Rutile Titanium Dioxide is a silicon, aluminum inorganic and organic surface treated rutile titanium dioxide pigment that provides high whiteness and glossiness, strong tinting strength, and good weather resistance and dispersibility. This product c...展开 R6628 Rutile Titanium Dioxide is a silicon, aluminum inorganic and organic surface treated rutile titanium dioxide pigment that provides high whiteness and glossiness, strong tinting strength, and good weather resistance and dispersibility. This product can be applied to waterborne and powder coatings. It has a titanium dioxide content of ≥93% and a rutile content of ≥97.5%. 收起 | |
| R6638 Rutile Titanium Dioxide | Shandong Jinhai Titanium Resources Technology Co., Ltd. | R6638 Rutile Titanium Dioxide is a multipurpose water-based rutile titanium dioxide produced from silicon, aluminum and organic treatment. This product can be used in water-based paint, particularly interior and exterior emulsion paint and water-based ink...展开 R6638 Rutile Titanium Dioxide is a multipurpose water-based rutile titanium dioxide produced from silicon, aluminum and organic treatment. This product can be used in water-based paint, particularly interior and exterior emulsion paint and water-based inks. It has a titanium dioxide content of ≥93% and a rutile content of ≥97.5%. 收起 | |
| SG-BTP | Nanjing Shuguang Chemical Group | SG-BTP, in the form of a viscous yellow liquid, is a titanate cross-linking agent. This product can be used in paints and coatings. It is mainly used as a catalyst for esterification and transesterification. | |
| SG-F 17 | Nanjing Shuguang Chemical Group | SG-F 17, in the form of a colorless to pale yellow clear liquid, is a methoxylated silane coupling agent. This product can be used as a coating for electronic products. It can also be used to aid in glass-cleaning applications. | |
| SG-R 706 | Nanjing Shuguang Chemical Group | SG-R 706, in the form of fine gray crystals, is an accelerant. This product can be used as a hot melt adhesive for metal and glass. It is mainly used as a retardant of polymerization for acrylic acid. | |
| SG-Si 123 | Nanjing Shuguang Chemical Group | SG-Si 123, in the form of a colorless to pale yellow clear liquid, is a chlorinated silane. This product can be made into electronegative toners used in xeroradiographs and image developing in printing applications. It is often used to make other silane...展开 SG-Si 123, in the form of a colorless to pale yellow clear liquid, is a chlorinated silane. This product can be made into electronegative toners used in xeroradiographs and image developing in printing applications. It is often used to make other silane coupling agents and other special silicone fluids. 收起 | |
| SG-Si 124 | Nanjing Shuguang Chemical Group | SG-Si 124, in the form of a colorless to pale yellow clear liquid, is a chlorinated silane. This product can be turned into electronegative toner, which is used in xeroradiographs and image developing in printing applications. It is often used to make o...展开 SG-Si 124, in the form of a colorless to pale yellow clear liquid, is a chlorinated silane. This product can be turned into electronegative toner, which is used in xeroradiographs and image developing in printing applications. It is often used to make other silane coupling agents and special silicone fluids. 收起 | |
| SG-Si 151 | Nanjing Shuguang Chemical Group | SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fibergl...展开 SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fiberglass or inorganic siliceous fibers. 收起 | |
| SG-Si 171 | Nanjing Shuguang Chemical Group | SG-Si 171, in the form of a colorless to pale yellow clear liquid, is a methoxylated vinyl silane coupling agent. This product can be used in the synthesis of special coatings. It is often used to cross-link ethylene/vinyl acetate (EVA) and chlorinated ...展开 SG-Si 171, in the form of a colorless to pale yellow clear liquid, is a methoxylated vinyl silane coupling agent. This product can be used in the synthesis of special coatings. It is often used to cross-link ethylene/vinyl acetate (EVA) and chlorinated polyethylene (CPE). 收起 | |
| SG-Si 172 | Nanjing Shuguang Chemical Group | SG-Si 172, in the form of a colorless to pale yellow clear liquid, is a chlorinated silane coupling agent. This product can be used as a coating for electronic products. It can also be used to aid in glass-cleaning applications. | |
| SG-Si 602 (SG-Si 2120) | Nanjing Shuguang Chemical Group | SG-Si 602 (SG-Si 2120), in the form of a colorless to yellow clear liquid, is a methoxylated silane coupling agent. This product can be used in silicon solidified and polysulfide sealants (one-pack or two-pack formulations). It crosslinks with the silic...展开 SG-Si 602 (SG-Si 2120), in the form of a colorless to yellow clear liquid, is a methoxylated silane coupling agent. This product can be used in silicon solidified and polysulfide sealants (one-pack or two-pack formulations). It crosslinks with the silicon sealant in order to improve adhesion to the base substrate. 收起 | |
| SG-Ti 501 | Nanjing Shuguang Chemical Group | SG-Ti 501, in the form of a light yellow liquid at room temperature, is a titanate coupling agent. This product can be used as an additive in paints. It is also a catalyst for the esterification of carboxylic acid with aliphatic acid without forming a s...展开 SG-Ti 501, in the form of a light yellow liquid at room temperature, is a titanate coupling agent. This product can be used as an additive in paints. It is also a catalyst for the esterification of carboxylic acid with aliphatic acid without forming a solid. 收起 | |
| SG-Ti 502 | Nanjing Shuguang Chemical Group | SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and gloss...展开 SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and glossy surfaces on glass, metal, filler, and pigments. 收起 | |
| SG-Ti 503 | Nanjing Shuguang Chemical Group | SG-Ti 503, in the form of a light red clear liquid, is a titanate coupling agent. This product can be used in printing inks, paints, and coatings. It will increase the heat-resistance, chemical resistance, and water-resistance of the end product. | |
| SG-Ti 504 | Nanjing Shuguang Chemical Group | SG-Ti 504, in the form of a light yellowish-brown liquid, is a titanate coupling agent. This product can be used in thixotropic coatings. It cross-links the carbohydrate-coated latex particles to create a high-viscosity paint. This product can also be ...展开 SG-Ti 504, in the form of a light yellowish-brown liquid, is a titanate coupling agent. This product can be used in thixotropic coatings. It cross-links the carbohydrate-coated latex particles to create a high-viscosity paint. This product can also be used in waterborne paints. 收起 | |
| SG-Ti 507 | Nanjing Shuguang Chemical Group | SG-Ti 507, in the form of a colorless to pale yellow liquid, is a titanate coupling agent. This product can be used in packing sealants, pigments and paints, in order to modify the surface treatment. It is normally used to optimize esterification and tr...展开 SG-Ti 507, in the form of a colorless to pale yellow liquid, is a titanate coupling agent. This product can be used in packing sealants, pigments and paints, in order to modify the surface treatment. It is normally used to optimize esterification and transesterification. 收起 | |
| SG-Ti 5105 | Nanjing Shuguang Chemical Group | SG-Ti 5105, in the form of a light red, clear liquid, is a titanate coupling agent. This product can be used in paints and printing inks. A cross-linking reaction could occur between acetylacetonate titanium and reactive groups in substrate, inks, and c...展开 SG-Ti 5105, in the form of a light red, clear liquid, is a titanate coupling agent. This product can be used in paints and printing inks. A cross-linking reaction could occur between acetylacetonate titanium and reactive groups in substrate, inks, and coating materials and a bridge would be formed. This bridging action by the titanate between the resin and the substrate increases the adhesion power of printing inks and paints. It also increases the heat-resistant, chemical resistance, and water-resistance of the end product. 收起 | |
| SG-Ti 595 | Nanjing Shuguang Chemical Group | SG-Ti 595, in the form of a light red, clear liquid, is a titanate coupling agent. With the evaporation of solvents after application of this product, a cross-linking reaction could occur between acetylacetonate titanium and reactive groups in the substr...展开 SG-Ti 595, in the form of a light red, clear liquid, is a titanate coupling agent. With the evaporation of solvents after application of this product, a cross-linking reaction could occur between acetylacetonate titanium and reactive groups in the substrate, ink or coating materials, and a bridge would be formed. This product will increase heat resistance, chemical resistance, and water resistance in the end product. The bridging action described improves the adhesion power of printing inks and paints. 收起 | |
| SG-TnBT | Nanjing Shuguang Chemical Group | SG-TnBT, in the form of a light yellow clear liquid, is a titanate coupling agent. This product can be used in polyester lacquers to prepare high-temperature paints. It can be used in cross-linking reactions to improve the adhesion between an adhesive a...展开 SG-TnBT, in the form of a light yellow clear liquid, is a titanate coupling agent. This product can be used in polyester lacquers to prepare high-temperature paints. It can be used in cross-linking reactions to improve the adhesion between an adhesive and a polymer and to enhance the adhesion of inks to a substrate. 收起 | |
| SG-TOT | Nanjing Shuguang Chemical Group | SG-TOT, in the form of a colorless to slightly yellow liquid, is a titanate coupling agent. This product can be used as an additive in coatings in order to improve adhesion. It is mainly used as a catalyst for esterification and transesterification. | |
| SG-TPT | Nanjing Shuguang Chemical Group | SG-TPT, in the form of a colorless to pale yellow clear liquid, is a titanate coupling agent. This product can be used as a cross-linking agent in various polymers for coating and paint applications, in order to improve the adhesion between the coating a...展开 SG-TPT, in the form of a colorless to pale yellow clear liquid, is a titanate coupling agent. This product can be used as a cross-linking agent in various polymers for coating and paint applications, in order to improve the adhesion between the coating and the substrate. It can also improve its dispersion and coloring, and as an anti-corrosive aid. 收起 | |
| SG-Zr 802 | Nanjing Shuguang Chemical Group | SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate s...展开 SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate surface. It can also be used in the electronic industry as a surface treatment for inorganic minerals to improve the dielectric properties of the composites. 收起 | |
| SG-Zr 803 | Nanjing Shuguang Chemical Group | SG-Zr 803, in the form of a colorless to light yellowish, clear to slightly hazy neutral liquid, is a zirconate coupling agent. This product can be used as a cross-linking agent for water borne coatings and printing inks. It will increase the adhesion o...展开 SG-Zr 803, in the form of a colorless to light yellowish, clear to slightly hazy neutral liquid, is a zirconate coupling agent. This product can be used as a cross-linking agent for water borne coatings and printing inks. It will increase the adhesion of the ink to a substrate surface, and provide heat stability, water resistance, chemical resistance, and gloss. 收起 | |
| SG-Zr 805 | Nanjing Shuguang Chemical Group | SG-Zr 805, in the form of a light yellow liquid, is a zirconate coupling agent. This product can be used in printing ink systems to maintain the stability of the system during storage. If the temperature rises, a cross-linking reaction occurs, which gi...展开 SG-Zr 805, in the form of a light yellow liquid, is a zirconate coupling agent. This product can be used in printing ink systems to maintain the stability of the system during storage. If the temperature rises, a cross-linking reaction occurs, which gives the ink better heat, chemical, and water resistance. It also increases the adhesion to the underlying substrate. 收起 | |
| Sintal A 213 | Galstaff Multiresine S.p.A. | Sintal A 213 is an alkyd resin used for the formulation of high solid stoving enamels thanks to it's easy thinning. It can be used in combination with Sintal R 254 to have better flexibility and can also be used for clear or pigmented nitro systems. | |
| Sintal G 63/70 RM | Galstaff Multiresine S.p.A. | Sintal G 63/70 RM is largely used to prepare white enamels for buildings. This product shows an excellent yellowing resistance. For indoor use, it is often mixed with Sintal S50/50 RM to improve dust-free (30'-40') and hardening speed. | |
| Sintal L45/60 X | Galstaff Multiresine S.p.A. | Sintal L45/60 X is an alkyd resin with fast drying time, high mechanical and moisture resistance and good wetting property. It is suitable for antirust primer, gloss enamels for industry mixed with chlorinated rubber. This product is not recommended for w...展开 Sintal L45/60 X is an alkyd resin with fast drying time, high mechanical and moisture resistance and good wetting property. It is suitable for antirust primer, gloss enamels for industry mixed with chlorinated rubber. This product is not recommended for white or light color. 收起 | |
| Sintal R 05/60X | Galstaff Multiresine S.p.A. | Sintal R 05/60X is a modified alkyd resin with the following characteristics: excellent adhesion on metal, fast dust-free and touch-free. It's main applications are antirust basecoats for steel pieces, matt and gloss enamels with fast drying time and good...展开 Sintal R 05/60X is a modified alkyd resin with the following characteristics: excellent adhesion on metal, fast dust-free and touch-free. It's main applications are antirust basecoats for steel pieces, matt and gloss enamels with fast drying time and good solvents resistance. clear nitro sanding sealers for wood, colorants and inks for wood. 收起 | |
| Sintal S 380/60 T | Galstaff Multiresine S.p.A. | Sintal S 380/60 T is an air-drying resin for high quality road-marking paints. It's main characteristics include high adhesion and resistance, excellent colour retention and fast drying time. Sintal S 380/60 T is suitable for air-drying enamels and for st...展开 Sintal S 380/60 T is an air-drying resin for high quality road-marking paints. It's main characteristics include high adhesion and resistance, excellent colour retention and fast drying time. Sintal S 380/60 T is suitable for air-drying enamels and for stoving materials in combination with urea or melamine resins. 收起 | |
| Sodium Metabisulphite | Nanjing Shuguang Chemical Group | Sodium Metabisulphite, in the form of a white to light yellow crystalline powder, is a reducing agent in photography. In this field, it is mixed with other agents to create developer fluid. It can also be used in the organic synthesis, pharmaceutical, a...展开 Sodium Metabisulphite, in the form of a white to light yellow crystalline powder, is a reducing agent in photography. In this field, it is mixed with other agents to create developer fluid. It can also be used in the organic synthesis, pharmaceutical, and printing industries. It is normally used as a general antiseptic. 收起 | |
| Syncryl 104 | Galstaff Multiresine S.p.A. | Syncryl 104 is an epoxy-acrylated oligomer for UV coatings for wood and OPV. It's main characteristics are it's high reactivity and hardness. Wood enamels, off-set inks, parquet varnishes and OPV coatings can be obtained by using Syncryl 104 in combinatio...展开 Syncryl 104 is an epoxy-acrylated oligomer for UV coatings for wood and OPV. It's main characteristics are it's high reactivity and hardness. Wood enamels, off-set inks, parquet varnishes and OPV coatings can be obtained by using Syncryl 104 in combination with other UV resins or acrylic monomers. 收起 | |
| Syncryl DPGDA | Galstaff Multiresine S.p.A. | Syncryl DPGDA is a low viscosity difunctional acrylic monomer, ideal for use in radiation curing formulations. This product allows applications on glass, metal, PVC floor coatings, wood, paper, textile, litho, silk screen, offset, binder adhesive, electro...展开 Syncryl DPGDA is a low viscosity difunctional acrylic monomer, ideal for use in radiation curing formulations. This product allows applications on glass, metal, PVC floor coatings, wood, paper, textile, litho, silk screen, offset, binder adhesive, electronics, photopolymers, inks and paints. Syncryl DPGDA provides low volatility, flexibility, adhesion, hardness and weatherability, water abrasion chemical and weather resistance. 收起 | |
| Syncryl GPTA | Galstaff Multiresine S.p.A. | Syncryl GPTA is an acrylic monomer diluent with low viscosity. It is ideal for use in radiation curing formulations such as sun glass, metal, PVC floor coatings, wood, paper, textile, electronics photopolymers, paints and inks. Syncryl GPTA provides fast ...展开 Syncryl GPTA is an acrylic monomer diluent with low viscosity. It is ideal for use in radiation curing formulations such as sun glass, metal, PVC floor coatings, wood, paper, textile, electronics photopolymers, paints and inks. Syncryl GPTA provides fast surface curing, low shrinkage, flexibility, adhesion, weatherability, water, chemical and abrasion resistance. 收起 | |
| Syncryl TMPEOTA | Galstaff Multiresine S.p.A. | Syncryl TMPEOTA is a trifunctional oligoacrylate that is a reactive oligomer which polymerizes with the free radicals in the system. It's main characteristics are low viscosity, light colour and low irritancy. It is for use in OPV, inks and coating system...展开 Syncryl TMPEOTA is a trifunctional oligoacrylate that is a reactive oligomer which polymerizes with the free radicals in the system. It's main characteristics are low viscosity, light colour and low irritancy. It is for use in OPV, inks and coating systems. 收起 | |
| Synteven 052 | Galstaff Multiresine S.p.A. | Synteven 052 is linear polyester bearing hydroxyl groups and is solvent free. It is used to improve the flexibility, toughness and resistance to wear and abrasion of the paint films. Synteven 052 can be used alone or in combination with other saturated po...展开 Synteven 052 is linear polyester bearing hydroxyl groups and is solvent free. It is used to improve the flexibility, toughness and resistance to wear and abrasion of the paint films. Synteven 052 can be used alone or in combination with other saturated polyesters to formulate two pack polyurethane coatings with very high flexibility for wood ,metal and plastics support. Is necessary in combination with isocynate, to have a good dry film, greatly overcrosslinked. 收起 | |
| Synteven 713 R | Galstaff Multiresine S.p.A. | Synteven 713 R is a direct glossy unsaturated polyester, TMPDE modified, monomer free. It is used for high solids coatings with a low monomer containing or monomer free systems. The viscosity may be reduced using ethyl acetate in small quantity, non highe...展开 Synteven 713 R is a direct glossy unsaturated polyester, TMPDE modified, monomer free. It is used for high solids coatings with a low monomer containing or monomer free systems. The viscosity may be reduced using ethyl acetate in small quantity, non higher then 10%,to avoid the presece of the micro bubbles in the film. Synteven 713 R is used to formulate high solids, clear and pigmented, coatings for wood and furniture monomer free, cured by conventional Hydroperoxide/Co. The films have very good air-releasing. 收起 | |
| Synteven 728 AE | Galstaff Multiresine S.p.A. | Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven ...展开 Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven 728 AE is used to formulate of clear and pigmented, wax-free coatings for wood and furniture, high gloss to matt, with good fast films drying. 收起 | |
| Synteven 9013 XA | Galstaff Multiresine S.p.A. | Synteven 9013 XA is a short oil alkyd resin , fatty acids modified ,in Xylene/Butyl Acetate (90/10). This product is especially suitable for the formulation of fast drying two-pack systems for clear or pigmented finishes for wood with a very long pot-life...展开 Synteven 9013 XA is a short oil alkyd resin , fatty acids modified ,in Xylene/Butyl Acetate (90/10). This product is especially suitable for the formulation of fast drying two-pack systems for clear or pigmented finishes for wood with a very long pot-life also in combination with aromatic polyisocianate. Synteven 9013 XA is used in the formulation of air drying two-pack coatings. 收起 | |
| Synteven P3 GA-707 | Galstaff Multiresine S.p.A. | Synteven P3 GA-707 is a highly reactive, unsaturated polyester resin in styrene. Synteven P3 GA-707 permits the formulation of coatings which can be cured by conventional methods or after addition of photoinitiators, by U.V. radiation. The resultant films...展开 Synteven P3 GA-707 is a highly reactive, unsaturated polyester resin in styrene. Synteven P3 GA-707 permits the formulation of coatings which can be cured by conventional methods or after addition of photoinitiators, by U.V. radiation. The resultant films are hard and resistant to scratching, chemicals and very good sandability. This product is used in the formulation of clear or pigmented coats for wood and furniture. The coating can be cured by conventional methods or U.V radiation. 收起 | |
| Uronal B 55/50 ABT | Galstaff Multiresine S.p.A. | Uronal B 55/50 ABT is a low viscosity aromatic isocyanurate suitable for PU wood coatings with long pot-life, flexibility, reactivity and hardness. It can be used alone or with Ftalon resins or mixed with other Uronal products. Uronal B 55/50 ABT is also ...展开 Uronal B 55/50 ABT is a low viscosity aromatic isocyanurate suitable for PU wood coatings with long pot-life, flexibility, reactivity and hardness. It can be used alone or with Ftalon resins or mixed with other Uronal products. Uronal B 55/50 ABT is also suitable for matt finishes with excellent flowing and good matting agents compatibility. 收起 | |
| Uronal RA 55/50 ABT | Galstaff Multiresine S.p.A. | Uronal RA 55/50 ABT is an aromatic isocianurate for PU coatings with high reactivity and more flexible than Uronal RA 50/50 ABT. It is suitable for fast drying PU coatings for wood in combination with the polyols (Ftalon). |
