UL Prospector

成功!

成功保存搜索结果
BLUESIL ADD 10086 Elkem Silicones BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints ...展开 BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. 收起
BLUESIL ADD 11013 Elkem Silicones BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks.
BLUESIL BP 9705 Elkem Silicones BLUESIL BP 9705 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials.
BLUESIL BP 9710 Elkem Silicones BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and...展开 BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and it does not contain ecotoxic surfactant. After it has dried on the surface, BLUESIL BP 9710 repels water and allows walls to breathe. Experience acquired over more than 40 years shows that silicone water repellents are a good answer to humidity problems in construction materials, particularly when for esthetical reasons the natural aspect of the material should be preserved. BLUESIL BP 9710 has been awarded a test certificate by CSTC (Centre Scientifique et Technique de - ): ref HD-340/133-151 on the 2006.02.20. 收起
BLUESIL BP 9800 Elkem Silicones BLUESIL BP 9800 is an aqueous APE-free polymethylsiloxane resin emulsion. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability.
BLUESIL BP 9821 Elkem Silicones BLUESIL BP 9821 is an aqueous APE-free polymethylsiloxane resin emulsion with low VOC content. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability.
BLUESIL BP 9878 Elkem Silicones BLUESIL BP 9878 is an aqueous polymethylsiloxane resin emulsion.This emulsion provides two fundamental properties of the silicone technology to the paint film: water repellency and permeability to water vapour.
BLUESIL BP 9900 Elkem Silicones BLUESIL BP 9900 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive for building materials.
BLUESIL BP 9920 Elkem Silicones BLUESIL BP 9920is anon-ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials.
BLUESIL EMUL 1803 Elkem Silicones BLUESIL EMUL 1803 is a non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers.
BLUESIL EMUL 269 Elkem Silicones BLUESIL EMUL 269 is an aqueous emulsion of an hydrogeno polysiloxane.
BLUESIL EMUL 284 Elkem Silicones ​BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening prop...展开 ​BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening properties (textile applications). 收起
BLUESIL EMUL 3500 Elkem Silicones BLUESIL EMUL 3500 is a general purpose; non-ionic oil in water silicone emulsion, of a high viscosity hydroxyl terminated polysiloxane.
BLUESIL EMUL 35B Elkem Silicones BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream...展开 BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream, neither during storage nor in use.Perfect stability in contact with hard water or zinc (i.e. in galvanized metal containers).Excellent heat stability after dilution.Very good wetting power. 收起
BLUESIL EMUL 55 Elkem Silicones BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component...展开 BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component elements making up polishes and cleaners for artificial leather fabrics (PVC, PUR) and furniture polishes. 收起
BLUESIL EMUL 872 Elkem Silicones BLUESIL EMUL 872 is a slightly anionic aqueous emulsion with a 60% dry content, for general purposes. This is a concentrated version of BLUESIL EMUL E1P.
BLUESIL EMUL E1P Elkem Silicones BLUESIL EMUL E1P is an oil in water emulsion containing 35 % of a silicone oil. It can be used in many industries.
BLUESIL EMUL E1P U1 Elkem Silicones BLUESIL EMUL E1P U1 is a general purpose, non-ionic, aqueous silicone emulsion.
BLUESIL EMULSION 2400 Elkem Silicones ​BLUESIL EMUL 2400 is a general purpose; non-ionic oil in water silicone emulsion of a methyl-hydrogen polysiloxane.
BLUESIL FLD 21625 Elkem Silicones ​BLUESIL FLD 21625is anα/ω-epoxy functionalised polydimethylsiloxane fluid.
BLUESIL FLD 45 Elkem Silicones BLUESIL FLD 45 is a low viscosity dimethylpolysiloxane oil used to prevent floating and flooding and improve leveling of air-drying paints.
BLUESIL FLD 47V1 000 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V100 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V350 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V50 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V500 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL PI 2074 Elkem Silicones BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems.
BLUESIL RES 6405 Elkem Silicones BLUESIL RES 6405 is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability.
BLUESIL RES 6405X Elkem Silicones BLUESIL RES 6405X is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability.
BLUESIL RES 6406XM Elkem Silicones BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability.
BLUESIL RES 6407 Elkem Silicones BLUESIL RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability.
BLUESIL RES 6482X Elkem Silicones BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It i...展开 BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It is also more compatible than other silicones with urea-formaldehyde, melamine-formaldehyde, epoxy, polyurethane and acrylic resins. Another use is as an additive for epoxy paints. It also improves weathering resistance. 收起
BLUESIL SP 3300 Elkem Silicones BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer.
BLUESIL SP 3303 Elkem Silicones BLUESIL SP 3303 is a polyether modified polysiloxane.
BLUESIL SP 3307 Elkem Silicones BLUESIL SP 3307 is a polyether modified polysiloxane.
BLUESIL TCS 7001 Elkem Silicones BLUESIL TCS 7001 is an alkyl polysiloxane solution in solvent phase specifically developed for the waterproofing of fabrics and leathers exposed to difficult weather conditions by spraying or impregnating.
CAF 2534 Elkem Silicones CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls.
Ftalon 27/70 ABT Galstaff Multiresine S.p.A. Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film har...展开 Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film hardness (panels can be stacked after 24hrs). 收起
Ftalon 34/60X Galstaff Multiresine S.p.A. Ftalon 34/60X provides good film curing, even with reduced quantity of isocyanates. The cured film is hard, but should be plasitized with Ftalon 42 or 43. Ftalon 34/60X is suitable for nitro varnishes for wood.
Ftalon 45/75 AET 2K-PU saturated polyester Galstaff Multiresine S.p.A. Ftalon 45/75 AET 2K-PU is a saturated polyester with fast solvent release for 2K-PU coatings. Ftalon 45's low viscosity allows to formulate high solid coatings with good hardening.
Ftalon TAC Galstaff Multiresine S.p.A. Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This prod...展开 Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This product has good resistance to yellowing and the outdoors, gloss retention and extremely low color. 收起
Ftalon TN/100 Galstaff Multiresine S.p.A. Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to ...展开 Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to it's excellent resistance, Ftalon TN/100 is suitable for marine applications. 收起
HC-Poloral P 100/S Galstaff Multiresine S.p.A. HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV r...展开 HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV roller basecoats. This product has excellent stability, although it's high reactivity. 收起
HELLUTEL™ HEC HR 1000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardan...展开 HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC HR 2000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC HR 3000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC HR 4000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC MR 2000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC MR 300 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant,...展开 HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC MR 5000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
Hydroxypropyl Starch Ether Shandong Yiteng Chemical Limited Liability Company Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including ad...展开 Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including adhesives, coating or organic liquids for building materials. 收起
Italester 205 Galstaff Multiresine S.p.A. Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude...展开 Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude steel, galvanized and on aluminum. It complies with European legislation for indirect food contract (Swiss Ordinance RS 817.023.21 Annexx 6, Part A or B). 收起
Italester 218 SND Galstaff Multiresine S.p.A. Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for alum...展开 Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for aluminum). Italester 218 SND provides excellent chemical resistance and flexibility in combination with HMMM resins (Itamin HM). 收起
Italester H27 Galstaff Multiresine S.p.A. Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retensio...展开 Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retension. 收起
Italester MX 353 Galstaff Multiresine S.p.A. Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemica...展开 Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemical resistances. 收起
Italkid 268 Galstaff Multiresine S.p.A. Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for th...展开 Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for the preparation of polyurethane lacquers for wood. 收起
Italkid 312 F Galstaff Multiresine S.p.A. Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Ur...展开 Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Uronal NL, Uronal NL 100). 收起
Italkid F 51 P Galstaff Multiresine S.p.A. Italkid F 51 P is an alkid resin for pigmented pastes that are organic or inorganic. It is suitable for pastes with good wetting properties, high pigment yield and colorimetric stability.
Italkid KR 543 Galstaff Multiresine S.p.A. Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent ...展开 Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent release and long pot-life. 收起
Italkid MR 950 Galstaff Multiresine S.p.A. Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thi...展开 Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thick layer, in vertical applications. 收起
Itamin BG 142 Galstaff Multiresine S.p.A. Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and ...展开 Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and is more flexible than BG 141. 收起
Itamin M 172 Galstaff Multiresine S.p.A. Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyest...展开 Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyesters. Itamin M 172 provides high brightness and good flow, good sterilization and chemical resistance, high reactivity and low free formaldehyde. 收起
Itamin U 34 Galstaff Multiresine S.p.A. Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood fl...展开 Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood floors. Itamin U 34's main features are: fast reactivity, long shelf life, low formaldehyde release and very good flow. 收起
Itamin URP 91 Galstaff Multiresine S.p.A. Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and t...展开 Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and toughness, fast hardening, with weak acids and good mechanical,chemical and abrasion resistance. 收起
LYNDCOAT 15 RTU Elkem Silicones LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RT...展开 LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RTU also helps keep molds and vents clean, reducing defects and downtime. Lyndcoat™ 15 RTU typically is durable through multiple production cycles. The need for reapplication is dependent on factors such as the rubber compound, curing time, curing temperature, tread design and application technique. Lyndcoat™ 15 RTU is designed for processes requiring low viscosity mold lubricants. 收起
LYNDCOAT BR 1100 RTU Elkem Silicones LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the c...展开 LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1100 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1100 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as Lyndcoat™ BR2101 RTU is highly recommended. 收起
LYNDCOAT BR 1102 Elkem Silicones LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the c...展开 LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1102 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1102 RTU is of medium viscosity and does not contain mica. 收起
LYNDCOAT BR 1103 RTU Elkem Silicones LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the c...展开 LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. LYNDCOAT® BR1103 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. LYNDCOAT® BR1103 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as LYNDCOAT® BR2201 RTU is highly recommended. 收起
LYNDCOAT BR 1110 RTU Elkem Silicones LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers ...展开 LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. LYNDCOAT BR 1110 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. LYNDCOAT BR 1110 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as LYNDCOAT BR 2101 RTU, is highly recommended. 收起
LYNDCOAT BR 1211 Elkem Silicones LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtim...展开 LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtimes. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. 收起
LYNDCOAT BR 1214 Elkem Silicones LYNDCOAT BR 1214 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It is particularly friction resistant and slip promoting. Applied on the inside of the green...展开 LYNDCOAT BR 1214 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It is particularly friction resistant and slip promoting. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. 收起
LYNDCOAT BR 1623 RTU Elkem Silicones LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coatin...展开 LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. Lyndcoat BR 1623 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. Lyndcoat BR 1623 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as Lyndcoat XR 3900 Primer, is highly recommended. 收起
LYNDCOAT BR 1812 Elkem Silicones LYNDCOAT BR 1812 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR 1812 RTU replace...展开 LYNDCOAT BR 1812 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR 1812 RTU replaces the conventional lining cements and solvent-based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR 1812 RTU does not contain aromatic or chlorinated solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR 1812 RTU is of low viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起
LYNDCOAT BR 2100 RTU Elkem Silicones LYNDCOAT BR 2100 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures durable performance.
LYNDCOAT BR 2104 Elkem Silicones LYNDCOAT BR 2104 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a long lasting multi release and slip performance. It was designed to...展开 LYNDCOAT BR 2104 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a long lasting multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起
LYNDCOAT BR 2201 Elkem Silicones ​LYNDCOAT BR 2201 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR 2201 replaces t...展开 ​LYNDCOAT BR 2201 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR 2201 replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. LYNDCOAT® BR 2201 does not contain aromatic or chlorinated solvents. It is easy to use and can be brushed, swabbed, or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. LYNDCOAT® BR 2201 is of high viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起
LYNDCOAT BR 2204 A1 Elkem Silicones LYNDCOAT BR 2204 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build...展开 LYNDCOAT BR 2204 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起
LYNDCOAT BR 2204 E4 Elkem Silicones ​LYNDCOAT BR 2204 E4 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce b...展开 ​LYNDCOAT BR 2204 E4 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起
LYNDCOAT BR 2511 RTU Elkem Silicones LYNDCOAT BR2511 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines long lasting multi release with excellent slip and exceptional air bleed performan...展开 LYNDCOAT BR2511 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines long lasting multi release with excellent slip and exceptional air bleed performance. 收起
LYNDCOAT BR 2512 Elkem Silicones LYNDCOAT BR2512 is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines particularly long lasting multi release and slip with exceptional air bleed performanc...展开 LYNDCOAT BR2512 is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines particularly long lasting multi release and slip with exceptional air bleed performance. 收起
LYNDCOAT BR 601 RTU Elkem Silicones LYNDCOAT BR-601 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-601 RTU rep...展开 LYNDCOAT BR-601 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-601 RTU replaces the conventional lining cements and solvent-based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR-601 RTU does not contain any solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR-601 RTU is of medium viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起
LYNDCOAT BR 790 RTU Elkem Silicones LYNDCOAT BR 790 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-790 RTU rep...展开 LYNDCOAT BR 790 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-790 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR-790 RTU does not contain any solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR-790 RTU is of low viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起
LYNDCOAT MR 5100 RTU Elkem Silicones LYNDCOAT MR 5100 RTU is a ready to use, solvent free, water based coating designed for use in tire moulds. It is a blend of polymers that cure at typical molding temperatures to form a clear, tough, coating with a strong bond to the metal mould, possessin...展开 LYNDCOAT MR 5100 RTU is a ready to use, solvent free, water based coating designed for use in tire moulds. It is a blend of polymers that cure at typical molding temperatures to form a clear, tough, coating with a strong bond to the metal mould, possessing excellent release and lubrication properties towards rubber. LYNDCOAT MR 5100 RTU helps keep moulds and vents clean, which reduces defects and downtime. LYNDCOAT MR 5100 RTU is durable through multiple production cycles. The need for reapplication is dependent on factors such as: the rubber compound, tread design, curing time, curing temperature, application technique and press type. LYNDCOAT MR 5100 RTU is designed for processes requiring low viscosity mould lubricants. 收起
MELLUTEL™ YL 1500E Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YL 1500E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YL 1500E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 1500E finds application in cement render and cement tile adhesives. 收起
MELLUTEL™ YL 800E Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YL 800E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YL 800E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 800E finds application in tile grouts. 收起
MELLUTEL™ YL 8E Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YL 8E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™...展开 MELLUTEL™ YL 8E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 8E finds application in gypsum plaster, gypsum join filler, cement render, ETICS/EIFS, and cement tile adhesive. 收起
MELLUTEL™ YM 10WM Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YM 10WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM 10WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 10WM finds application in gypsum plaster, ETICS/EIFS, and cement tile adhesive. 收起
MELLUTEL™ YM 10WMS Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YM 10WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 10WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 10WMS finds application in dispersion tile adhesives, detergent, and waterborne paint. 收起
MELLUTEL™ YM 15WM Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YM 15WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM 15WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 15WM finds application in ETICS/EIFS, cement tile adhesive, and dispersion tile adhesive. 收起
MELLUTEL™ YM 15WMS Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YM 15WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 15WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 15WMS finds application in ETICS/EIFS, cement tile adhesives, dispersion tile adhesives, detergent, and waterborne paint. 收起
MELLUTEL™ YM 20WM Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YM20 WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM20 WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 20WM finds application in ETICS/EIFS and cement tile adhesive. 收起
MELLUTEL™ YM 20WMS Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YM 20WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 20WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 20WMS finds application in dispersion tile adhesives. 收起
MELLUTEL™ YT 40M Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YT 40M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL...展开 MELLUTEL™ YT 40M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YT 40M finds application in gypsum plaster, gypsum join filler, cement render, ETICS/EIFS, and cement tile adhesive. 收起
MELLUTEL™ YT 70M Shandong Yiteng Chemical Limited Liability Company MELLUTEL™ YT 70M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL...展开 MELLUTEL™ YT 70M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YT 70M finds application in gypsum plaster, cement render, ETICS/EIFS, and cement tile adhesive. 收起
Poloral G 650 Galstaff Multiresine S.p.A. Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usua...展开 Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usually used for both glossy and matt UV topcoats with smooth, clear and hard surface. 收起
Poloral K 128 Galstaff Multiresine S.p.A. Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and ma...展开 Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and marbles. The curing time hardness and the adhesion are peculiar characteristics of Poloral K 128, even at low temperature. 收起
Poloral UV 92/85 ABT Galstaff Multiresine S.p.A. Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding seal...展开 Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding sealer, to be applied by curtain coater. 收起
R6600 Rutile Titanium Dioxide Shandong Jinhai Titanium Resources Technology Co., Ltd. R6600 Rutile Titanium Dioxide is a rutile titanium dioxide pigment that provides good weather resistance, excellent pigment, optical and stable chemical properties, and good hiding strength. This product is commonly used in paints, primers, and road marki...展开 R6600 Rutile Titanium Dioxide is a rutile titanium dioxide pigment that provides good weather resistance, excellent pigment, optical and stable chemical properties, and good hiding strength. This product is commonly used in paints, primers, and road marking paint. It has a titanium dioxide content of ≥98% and a rutile content of ≥97.5%. 收起
R6618 Rutile Titanium Dioxide Shandong Jinhai Titanium Resources Technology Co., Ltd. R6618 Rutile Titanium Dioxide is a zirconium, aluminum and organic surface treated multipurpose rutile titanium dioxide pigment. This product has a narrow-size material distribution, good whiteness and high weather resistance, and it can be applied to coa...展开 R6618 Rutile Titanium Dioxide is a zirconium, aluminum and organic surface treated multipurpose rutile titanium dioxide pigment. This product has a narrow-size material distribution, good whiteness and high weather resistance, and it can be applied to coating, paints and used in ink production. It has a titanium dioxide content of ≥94% and a rutile content of ≥98%. 收起
R6628 Rutile Titanium Dioxide Shandong Jinhai Titanium Resources Technology Co., Ltd. R6628 Rutile Titanium Dioxide is a silicon, aluminum inorganic and organic surface treated rutile titanium dioxide pigment that provides high whiteness and glossiness, strong tinting strength, and good weather resistance and dispersibility. This product c...展开 R6628 Rutile Titanium Dioxide is a silicon, aluminum inorganic and organic surface treated rutile titanium dioxide pigment that provides high whiteness and glossiness, strong tinting strength, and good weather resistance and dispersibility. This product can be applied to waterborne and powder coatings. It has a titanium dioxide content of ≥93% and a rutile content of ≥97.5%. 收起