| Cimsil A35 | Tolsa SA | Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in ...展开 Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in the systems to which it is incorporated. It can be used in ceramic adhesives, ready mixed adhesives, crack fillers, and pastes. 收起 | |
| Cimsil A55G | Tolsa SA | Cimsil A55G is a thixotropic powder additive. It can be used in cement and/or lime and gypsum systems. It is used as an additive for mortars and stuccos rendering, tile adhesive mortars, self-leveling mortars, and waterproofing mortars. | |
| Cimsil C22 | Tolsa SA | Cimsil C22 is a water dispersible powdered additive for use in mortars. It is developed to act as a water-retaining agent and a rheological additive. It can be used for projected renders and stuccos, skim coats, and monolayer mortars. | |
| Cimsil CT1 | Tolsa SA | Cimsil CT1 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesive mortars. It can be used in mortars and tile adhesives. | |
| Cimsil CT2 | Tolsa SA | Cimsil CT2 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesives. It can be used in mortars and tile adhesives. | |
| Cimsil D10 | Tolsa SA | Cimsil D10 is a water dispersible powdered additive. It is designed to act as a water-retaining agent and an anti-sliding additive. It can be used in ceramic adhesives, adhesives, crack fillers, and pastes. | |
| Cimsil G30 | Tolsa SA | Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, s...展开 Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, spackle compounds, crack fillers, mastics, and sealants. 收起 | |
| Cimsil G50 | Tolsa SA | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
| Fillite Standard Grades | Tolsa SA | Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboar...展开 Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboard joint compounds, oil well cement, and tile adhesives. 收起 | |
| Fillite White / High-Alumina Grades | Tolsa SA | Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, s...展开 Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, sealants, coatings, cast resins, refractories, foundry applications, or high temperatures resistant coatings. 收起 | |
| Ftalon 27/70 ABT | Galstaff Multiresine S.p.A. | Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film har...展开 Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film hardness (panels can be stacked after 24hrs). 收起 | |
| Ftalon 34/60X | Galstaff Multiresine S.p.A. | Ftalon 34/60X provides good film curing, even with reduced quantity of isocyanates. The cured film is hard, but should be plasitized with Ftalon 42 or 43. Ftalon 34/60X is suitable for nitro varnishes for wood. | |
| Ftalon 45/75 AET 2K-PU saturated polyester | Galstaff Multiresine S.p.A. | Ftalon 45/75 AET 2K-PU is a saturated polyester with fast solvent release for 2K-PU coatings. Ftalon 45's low viscosity allows to formulate high solid coatings with good hardening. | |
| Ftalon TAC | Galstaff Multiresine S.p.A. | Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This prod...展开 Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This product has good resistance to yellowing and the outdoors, gloss retention and extremely low color. 收起 | |
| Ftalon TN/100 | Galstaff Multiresine S.p.A. | Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to ...展开 Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to it's excellent resistance, Ftalon TN/100 is suitable for marine applications. 收起 | |
| HC-Poloral P 100/S | Galstaff Multiresine S.p.A. | HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV r...展开 HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV roller basecoats. This product has excellent stability, although it's high reactivity. 收起 | |
| HELLUTEL™ HEC HR 1000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardan...展开 HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 3000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 4000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 300 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant,...展开 HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 5000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| Hydroxypropyl Starch Ether | Shandong Yiteng Chemical Limited Liability Company | Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including ad...展开 Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including adhesives, coating or organic liquids for building materials. 收起 | |
| Italester 205 | Galstaff Multiresine S.p.A. | Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude...展开 Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude steel, galvanized and on aluminum. It complies with European legislation for indirect food contract (Swiss Ordinance RS 817.023.21 Annexx 6, Part A or B). 收起 | |
| Italester 218 SND | Galstaff Multiresine S.p.A. | Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for alum...展开 Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for aluminum). Italester 218 SND provides excellent chemical resistance and flexibility in combination with HMMM resins (Itamin HM). 收起 | |
| Italester H27 | Galstaff Multiresine S.p.A. | Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retensio...展开 Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retension. 收起 | |
| Italester MX 353 | Galstaff Multiresine S.p.A. | Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemica...展开 Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemical resistances. 收起 | |
| Italkid 268 | Galstaff Multiresine S.p.A. | Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for th...展开 Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for the preparation of polyurethane lacquers for wood. 收起 | |
| Italkid 312 F | Galstaff Multiresine S.p.A. | Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Ur...展开 Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Uronal NL, Uronal NL 100). 收起 | |
| Italkid F 51 P | Galstaff Multiresine S.p.A. | Italkid F 51 P is an alkid resin for pigmented pastes that are organic or inorganic. It is suitable for pastes with good wetting properties, high pigment yield and colorimetric stability. | |
| Italkid KR 543 | Galstaff Multiresine S.p.A. | Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent ...展开 Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent release and long pot-life. 收起 | |
| Italkid MR 950 | Galstaff Multiresine S.p.A. | Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thi...展开 Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thick layer, in vertical applications. 收起 | |
| Itamin BG 142 | Galstaff Multiresine S.p.A. | Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and ...展开 Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and is more flexible than BG 141. 收起 | |
| Itamin M 172 | Galstaff Multiresine S.p.A. | Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyest...展开 Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyesters. Itamin M 172 provides high brightness and good flow, good sterilization and chemical resistance, high reactivity and low free formaldehyde. 收起 | |
| Itamin U 34 | Galstaff Multiresine S.p.A. | Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood fl...展开 Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood floors. Itamin U 34's main features are: fast reactivity, long shelf life, low formaldehyde release and very good flow. 收起 | |
| Itamin URP 91 | Galstaff Multiresine S.p.A. | Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and t...展开 Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and toughness, fast hardening, with weak acids and good mechanical,chemical and abrasion resistance. 收起 | |
| MELLUTEL™ YL 1500E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 1500E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YL 1500E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 1500E finds application in cement render and cement tile adhesives. 收起 | |
| MELLUTEL™ YL 800E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 800E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YL 800E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 800E finds application in tile grouts. 收起 | |
| MELLUTEL™ YL 8E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 8E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™...展开 MELLUTEL™ YL 8E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 8E finds application in gypsum plaster, gypsum join filler, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 10WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 10WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM 10WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 10WM finds application in gypsum plaster, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 10WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 10WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 10WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 10WMS finds application in dispersion tile adhesives, detergent, and waterborne paint. 收起 | |
| MELLUTEL™ YM 15WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 15WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM 15WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 15WM finds application in ETICS/EIFS, cement tile adhesive, and dispersion tile adhesive. 收起 | |
| MELLUTEL™ YM 15WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 15WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 15WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 15WMS finds application in ETICS/EIFS, cement tile adhesives, dispersion tile adhesives, detergent, and waterborne paint. 收起 | |
| MELLUTEL™ YM 20WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM20 WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM20 WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 20WM finds application in ETICS/EIFS and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 20WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 20WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 20WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 20WMS finds application in dispersion tile adhesives. 收起 | |
| MELLUTEL™ YT 40M | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YT 40M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL...展开 MELLUTEL™ YT 40M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YT 40M finds application in gypsum plaster, gypsum join filler, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YT 70M | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YT 70M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL...展开 MELLUTEL™ YT 70M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YT 70M finds application in gypsum plaster, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| Microsil 100 | Tolsa SA | Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor....展开 Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 100S | Tolsa SA | Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting...展开 Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200 | Tolsa SA | Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. ...展开 Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200S | Tolsa SA | Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting f...展开 Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Microsil 325 | Tolsa SA | Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be ...展开 Microsil 325 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. 收起 | |
| Microsil 325S | Tolsa SA | Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in a...展开 Microsil 325 consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It was designed to be used in applications requiring a small particle size or in applications where a lower viscosity or smaller absorption is required. It can be used in synthetic marble and polymeric mortars, asphalt emulsions, resin based waterproofing coatings, friction materials, textural paints, putties, and mastics. 收起 | |
| Pangel AD | Tolsa SA | Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets,...展开 Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants, and mastics. 收起 | |
| Pangel B10 | Tolsa SA | Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatin...展开 Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatings, printing inks, drilling mud, greases, sealants and joints, asphalt coatings, putties, rubber, gel-coat, and emulsions. 收起 | |
| Pangel B20 | Tolsa SA | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...展开 Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. 收起 | |
| Pangel B40 | Tolsa SA | Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropi...展开 Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropic, suspension, and sagging-resistance properties. It can be used in coatings, paints, printing inks, paint strippers, sealants and joints, vinyl plastisol, gel-coat, nail varnish, wash coat alcohols, glycols, and esters. 收起 | |
| Pangel B5 | Tolsa SA | Pangel B5 is a powdered additive with a high thickening and anti-setting capacity for low polarity systems, particularly those based on both aliphatic solvents and mineral or synthetic oils. It provides thixotropic, suspension and sagging-resistance prop...展开 Pangel B5 is a powdered additive with a high thickening and anti-setting capacity for low polarity systems, particularly those based on both aliphatic solvents and mineral or synthetic oils. It provides thixotropic, suspension and sagging-resistance properties based on both aliphatic type solvents and mineral or synthetic oils. It can be used in solvent-borne paints and coatings, lubricant greases, and drilling mud. 收起 | |
| Pangel HV | Tolsa SA | Pangel HV is a rheological additive that is manufactured using high purity sepiolite in the form of high porosity pellets. It controls system flow and consistency of components including solvents and fillers. It can be used in fibro-cement, water-based ...展开 Pangel HV is a rheological additive that is manufactured using high purity sepiolite in the form of high porosity pellets. It controls system flow and consistency of components including solvents and fillers. It can be used in fibro-cement, water-based paints, foundry coatings, asphalt emulsions, suspension fertilisers, and liquid fertilisers. 收起 | |
| Pangel M100 | Tolsa SA | Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, em...展开 Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, emulsion paints, textural paints, and bituminous emulsion. 收起 | |
| Pangel M150 | Tolsa SA | Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can...展开 Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can be used for adhesives, bituminous emulsion, and seed coatings. 收起 | |
| Pangel M280 | Tolsa SA | Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties...展开 Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties. It can be used for adhesives, emulsion paints, bituminous emulsion, textural paints, and granulation and agglomeration. 收起 | |
| Pangel OM4 | Tolsa SA | Pangel OM4 is a rheological additive for intermediate to low polarity systems made from purified bentonite clay. It is recommended for solvent-borne systems that require thixotropic and pseudoplastic effects, sag control, levelling, pigment settling, and...展开 Pangel OM4 is a rheological additive for intermediate to low polarity systems made from purified bentonite clay. It is recommended for solvent-borne systems that require thixotropic and pseudoplastic effects, sag control, levelling, pigment settling, and high viscosity and consistency over a wide temperature range. it can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes road marking paints, varnishes, lubricating greases, and bituminous undercoats. 收起 | |
| Pangel OM8 | Tolsa SA | Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosi...展开 Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, bituminous undercoats, varnishes, and inks. 收起 | |
| Pangel OMD1 | Tolsa SA | Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control...展开 Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, varnishes, lubricating greases, and bituminous undercoats. 收起 | |
| Pangel OMD2 | Tolsa SA | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...展开 Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. 收起 | |
| Pangel S9 | Tolsa SA | Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatin...展开 Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatings, water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants and mastics, and additives for cement and gypsum systems. 收起 | |
| Pansil | Tolsa SA | Pansil is a polyfunctional additive manufactured from sepiolite. It is used as a suspension aid and active filler. It can be used in asphalt sheets, multi-color paints, and rubber. | |
| Pansil 100 | Tolsa SA | Pansil 100 is a polyfunctional additive, which is supplied as a fine powder manufactured from sepiolite. It can be used as a suspension aid and active filler. It can be used in asphalt sheets, conglomeration in molecular sieves, seed coating, and asphal...展开 Pansil 100 is a polyfunctional additive, which is supplied as a fine powder manufactured from sepiolite. It can be used as a suspension aid and active filler. It can be used in asphalt sheets, conglomeration in molecular sieves, seed coating, and asphalt emulsions. 收起 | |
| Pansil UltraSpheres™ 2000 | Tolsa SA | Pansil UltraSpheres™ 2000 consists of ceramic microspheres. It is used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in film/antiblock applications, top coats, high solid industrial coatings, an...展开 Pansil UltraSpheres™ 2000 consists of ceramic microspheres. It is used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in film/antiblock applications, top coats, high solid industrial coatings, and decorative powder coatings. 收起 | |
| Pansil UltraSpheres™ 4000 | Tolsa SA | Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marin...展开 Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marine coatings, aircraft coatings, water reducible industrial coatings, powder coatings, coil coatings, radiation-curable inks and coatings, and primers. 收起 | |
| Pansil UltraSpheres™ 6000 | Tolsa SA | Pansil UltraSperes™ 6000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction mater...展开 Pansil UltraSperes™ 6000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction materials. 收起 | |
| Pansil UltraSpheres™ 8000 | Tolsa SA | Pansil UltraSpheres™ 8000 consists of ceramic microspheres. They are used as additives and fillers and paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction mater...展开 Pansil UltraSpheres™ 8000 consists of ceramic microspheres. They are used as additives and fillers and paints, coatings, mastics, and other construction materials. It can be used in polymer concrete, epoxy flooring, textured coatings, and friction materials. 收起 | |
| Poloral G 650 | Galstaff Multiresine S.p.A. | Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usua...展开 Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usually used for both glossy and matt UV topcoats with smooth, clear and hard surface. 收起 | |
| Poloral K 128 | Galstaff Multiresine S.p.A. | Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and ma...展开 Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and marbles. The curing time hardness and the adhesion are peculiar characteristics of Poloral K 128, even at low temperature. 收起 | |
| Poloral UV 92/85 ABT | Galstaff Multiresine S.p.A. | Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding seal...展开 Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding sealer, to be applied by curtain coater. 收起 | |
| Sintal A 213 | Galstaff Multiresine S.p.A. | Sintal A 213 is an alkyd resin used for the formulation of high solid stoving enamels thanks to it's easy thinning. It can be used in combination with Sintal R 254 to have better flexibility and can also be used for clear or pigmented nitro systems. | |
| Sintal G 63/70 RM | Galstaff Multiresine S.p.A. | Sintal G 63/70 RM is largely used to prepare white enamels for buildings. This product shows an excellent yellowing resistance. For indoor use, it is often mixed with Sintal S50/50 RM to improve dust-free (30'-40') and hardening speed. | |
| Sintal L45/60 X | Galstaff Multiresine S.p.A. | Sintal L45/60 X is an alkyd resin with fast drying time, high mechanical and moisture resistance and good wetting property. It is suitable for antirust primer, gloss enamels for industry mixed with chlorinated rubber. This product is not recommended for w...展开 Sintal L45/60 X is an alkyd resin with fast drying time, high mechanical and moisture resistance and good wetting property. It is suitable for antirust primer, gloss enamels for industry mixed with chlorinated rubber. This product is not recommended for white or light color. 收起 | |
| Sintal R 05/60X | Galstaff Multiresine S.p.A. | Sintal R 05/60X is a modified alkyd resin with the following characteristics: excellent adhesion on metal, fast dust-free and touch-free. It's main applications are antirust basecoats for steel pieces, matt and gloss enamels with fast drying time and good...展开 Sintal R 05/60X is a modified alkyd resin with the following characteristics: excellent adhesion on metal, fast dust-free and touch-free. It's main applications are antirust basecoats for steel pieces, matt and gloss enamels with fast drying time and good solvents resistance. clear nitro sanding sealers for wood, colorants and inks for wood. 收起 | |
| Sintal S 380/60 T | Galstaff Multiresine S.p.A. | Sintal S 380/60 T is an air-drying resin for high quality road-marking paints. It's main characteristics include high adhesion and resistance, excellent colour retention and fast drying time. Sintal S 380/60 T is suitable for air-drying enamels and for st...展开 Sintal S 380/60 T is an air-drying resin for high quality road-marking paints. It's main characteristics include high adhesion and resistance, excellent colour retention and fast drying time. Sintal S 380/60 T is suitable for air-drying enamels and for stoving materials in combination with urea or melamine resins. 收起 | |
| Syncryl 104 | Galstaff Multiresine S.p.A. | Syncryl 104 is an epoxy-acrylated oligomer for UV coatings for wood and OPV. It's main characteristics are it's high reactivity and hardness. Wood enamels, off-set inks, parquet varnishes and OPV coatings can be obtained by using Syncryl 104 in combinatio...展开 Syncryl 104 is an epoxy-acrylated oligomer for UV coatings for wood and OPV. It's main characteristics are it's high reactivity and hardness. Wood enamels, off-set inks, parquet varnishes and OPV coatings can be obtained by using Syncryl 104 in combination with other UV resins or acrylic monomers. 收起 | |
| Syncryl DPGDA | Galstaff Multiresine S.p.A. | Syncryl DPGDA is a low viscosity difunctional acrylic monomer, ideal for use in radiation curing formulations. This product allows applications on glass, metal, PVC floor coatings, wood, paper, textile, litho, silk screen, offset, binder adhesive, electro...展开 Syncryl DPGDA is a low viscosity difunctional acrylic monomer, ideal for use in radiation curing formulations. This product allows applications on glass, metal, PVC floor coatings, wood, paper, textile, litho, silk screen, offset, binder adhesive, electronics, photopolymers, inks and paints. Syncryl DPGDA provides low volatility, flexibility, adhesion, hardness and weatherability, water abrasion chemical and weather resistance. 收起 | |
| Syncryl GPTA | Galstaff Multiresine S.p.A. | Syncryl GPTA is an acrylic monomer diluent with low viscosity. It is ideal for use in radiation curing formulations such as sun glass, metal, PVC floor coatings, wood, paper, textile, electronics photopolymers, paints and inks. Syncryl GPTA provides fast ...展开 Syncryl GPTA is an acrylic monomer diluent with low viscosity. It is ideal for use in radiation curing formulations such as sun glass, metal, PVC floor coatings, wood, paper, textile, electronics photopolymers, paints and inks. Syncryl GPTA provides fast surface curing, low shrinkage, flexibility, adhesion, weatherability, water, chemical and abrasion resistance. 收起 | |
| Syncryl TMPEOTA | Galstaff Multiresine S.p.A. | Syncryl TMPEOTA is a trifunctional oligoacrylate that is a reactive oligomer which polymerizes with the free radicals in the system. It's main characteristics are low viscosity, light colour and low irritancy. It is for use in OPV, inks and coating system...展开 Syncryl TMPEOTA is a trifunctional oligoacrylate that is a reactive oligomer which polymerizes with the free radicals in the system. It's main characteristics are low viscosity, light colour and low irritancy. It is for use in OPV, inks and coating systems. 收起 | |
| Synteven 052 | Galstaff Multiresine S.p.A. | Synteven 052 is linear polyester bearing hydroxyl groups and is solvent free. It is used to improve the flexibility, toughness and resistance to wear and abrasion of the paint films. Synteven 052 can be used alone or in combination with other saturated po...展开 Synteven 052 is linear polyester bearing hydroxyl groups and is solvent free. It is used to improve the flexibility, toughness and resistance to wear and abrasion of the paint films. Synteven 052 can be used alone or in combination with other saturated polyesters to formulate two pack polyurethane coatings with very high flexibility for wood ,metal and plastics support. Is necessary in combination with isocynate, to have a good dry film, greatly overcrosslinked. 收起 | |
| Synteven 713 R | Galstaff Multiresine S.p.A. | Synteven 713 R is a direct glossy unsaturated polyester, TMPDE modified, monomer free. It is used for high solids coatings with a low monomer containing or monomer free systems. The viscosity may be reduced using ethyl acetate in small quantity, non highe...展开 Synteven 713 R is a direct glossy unsaturated polyester, TMPDE modified, monomer free. It is used for high solids coatings with a low monomer containing or monomer free systems. The viscosity may be reduced using ethyl acetate in small quantity, non higher then 10%,to avoid the presece of the micro bubbles in the film. Synteven 713 R is used to formulate high solids, clear and pigmented, coatings for wood and furniture monomer free, cured by conventional Hydroperoxide/Co. The films have very good air-releasing. 收起 | |
| Synteven 728 AE | Galstaff Multiresine S.p.A. | Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven ...展开 Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven 728 AE is used to formulate of clear and pigmented, wax-free coatings for wood and furniture, high gloss to matt, with good fast films drying. 收起 | |
| Synteven 9013 XA | Galstaff Multiresine S.p.A. | Synteven 9013 XA is a short oil alkyd resin , fatty acids modified ,in Xylene/Butyl Acetate (90/10). This product is especially suitable for the formulation of fast drying two-pack systems for clear or pigmented finishes for wood with a very long pot-life...展开 Synteven 9013 XA is a short oil alkyd resin , fatty acids modified ,in Xylene/Butyl Acetate (90/10). This product is especially suitable for the formulation of fast drying two-pack systems for clear or pigmented finishes for wood with a very long pot-life also in combination with aromatic polyisocianate. Synteven 9013 XA is used in the formulation of air drying two-pack coatings. 收起 | |
| Synteven P3 GA-707 | Galstaff Multiresine S.p.A. | Synteven P3 GA-707 is a highly reactive, unsaturated polyester resin in styrene. Synteven P3 GA-707 permits the formulation of coatings which can be cured by conventional methods or after addition of photoinitiators, by U.V. radiation. The resultant films...展开 Synteven P3 GA-707 is a highly reactive, unsaturated polyester resin in styrene. Synteven P3 GA-707 permits the formulation of coatings which can be cured by conventional methods or after addition of photoinitiators, by U.V. radiation. The resultant films are hard and resistant to scratching, chemicals and very good sandability. This product is used in the formulation of clear or pigmented coats for wood and furniture. The coating can be cured by conventional methods or U.V radiation. 收起 | |
| Uronal B 55/50 ABT | Galstaff Multiresine S.p.A. | Uronal B 55/50 ABT is a low viscosity aromatic isocyanurate suitable for PU wood coatings with long pot-life, flexibility, reactivity and hardness. It can be used alone or with Ftalon resins or mixed with other Uronal products. Uronal B 55/50 ABT is also ...展开 Uronal B 55/50 ABT is a low viscosity aromatic isocyanurate suitable for PU wood coatings with long pot-life, flexibility, reactivity and hardness. It can be used alone or with Ftalon resins or mixed with other Uronal products. Uronal B 55/50 ABT is also suitable for matt finishes with excellent flowing and good matting agents compatibility. 收起 | |
| Uronal RA 55/50 ABT | Galstaff Multiresine S.p.A. | Uronal RA 55/50 ABT is an aromatic isocianurate for PU coatings with high reactivity and more flexible than Uronal RA 50/50 ABT. It is suitable for fast drying PU coatings for wood in combination with the polyols (Ftalon). |
