UL Prospector

成功!

成功保存搜索结果
Crestacryl® 71-1030 Scott Bader Crestacryl® 71-1030 is a thermoplastic styrene acrylic resin that exhibits good adhesion, flexibility, and vapor permeability along with good alkali and water resistance properties. This product is ideal for use in high-grade façade, asbestos, wall, and c...展开 Crestacryl® 71-1030 is a thermoplastic styrene acrylic resin that exhibits good adhesion, flexibility, and vapor permeability along with good alkali and water resistance properties. This product is ideal for use in high-grade façade, asbestos, wall, and concrete coatings. 收起
Crestacryl® 71-5060 Scott Bader Crestacryl® 71-5060 is a thermoplastic, pure acrylic resin which gives rapid solvent release, very good elasticity, excellent adhesion on metallic substrates, and very good alkali and water resistance. This product is ideal for use in primer and finish ap...展开 Crestacryl® 71-5060 is a thermoplastic, pure acrylic resin which gives rapid solvent release, very good elasticity, excellent adhesion on metallic substrates, and very good alkali and water resistance. This product is ideal for use in primer and finish applications for wood and metals. 收起
Crestacryl® 71-8026 Scott Bader Crestacryl® 71-8026 is a thermoplastic acrylic resin that displays good hardness, adhesion, and elasticity. This product is ideal for use in fast-drying, high grade road-marking paints.
Crestacryl® 71-9044 Scott Bader Crestacryl® 71-9044 is a thermoplastic acrylic resin that displays good hardness, elasticity, and adhesion properties. This product is ideal for use in fast-drying, high quality road-marking paints with excellent durability.
Crestakyd® 10-0504 Scott Bader Crestakyd® 10-0504 is a long oil air-drying alkyd, derived from linoleic rich fatty acids, esterified with pentaerythritol, and supplied at 100% solids. This product is ideal for use in low VOC exterior paints and wood stains.
Crestakyd® 10-1019 Scott Bader Crestakyd® 10-1019 is a long oil air-drying alkyd that is fast drying and has good flow and brush characteristics as well as exhibiting good weather resistance and gloss retention properties. It can be used in economical, decorative, and do-it-yourself pa...展开 Crestakyd® 10-1019 is a long oil air-drying alkyd that is fast drying and has good flow and brush characteristics as well as exhibiting good weather resistance and gloss retention properties. It can be used in economical, decorative, and do-it-yourself paints, as well as topcoats, primers, and varnishes. 收起
Crestakyd® 10-1022 Scott Bader Crestakyd® 10-1022 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention. This product is ideal for use in economical, decorative, and do-it-yourself pain...展开 Crestakyd® 10-1022 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention. This product is ideal for use in economical, decorative, and do-it-yourself paints, as well as topcoats, primers, and varnishes. 收起
Crestakyd® 10-1025 Scott Bader Crestakyd® 10-1025 is a long oil air-drying alkyd that displays fast drying, excellent flow and brushability characteristics, and good weather resistance and gloss retention. This product is ideal for use in economical, decorative, and do-it-yourself pain...展开 Crestakyd® 10-1025 is a long oil air-drying alkyd that displays fast drying, excellent flow and brushability characteristics, and good weather resistance and gloss retention. This product is ideal for use in economical, decorative, and do-it-yourself paints, as well as topcoats, primers, and varnishes. 收起
Crestakyd® 10-2020 Scott Bader Crestakyd® 10-2020 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention properties. This product is ideal for use in commercial, decorative, and do-it-yo...展开 Crestakyd® 10-2020 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention properties. This product is ideal for use in commercial, decorative, and do-it-yourself paints, as well as primers, varnishes, and topcoats. 收起
Crestakyd® 10-2023 Scott Bader Crestakyd® 10-2023 is a long oil, air-drying, isophthalic alkyd with high solids content and excellent flow & brushability characteristics. This product is recommended for use in low VOC exterior paints, wood stains, and lacquers.
Crestakyd® 10-2033 Scott Bader Crestakyd® 10-2033 is a long oil air-drying alkyd that displays fast drying, excellent brushability, and good flow characteristics. This product is ideal for use in economical and decorative paints, varnishes, and primers. It also features excellent compa...展开 Crestakyd® 10-2033 is a long oil air-drying alkyd that displays fast drying, excellent brushability, and good flow characteristics. This product is ideal for use in economical and decorative paints, varnishes, and primers. It also features excellent compatibility with "universal" colorants. 收起
Crestakyd® 10-2505 Scott Bader Crestakyd® 10-2505 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good gloss retention and weather resistance properties. This product is ideal for use in economical and decorative paints, va...展开 Crestakyd® 10-2505 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good gloss retention and weather resistance properties. This product is ideal for use in economical and decorative paints, varnishes, and primers. 收起
Crestakyd® 10-3000 Scott Bader Crestakyd® 10-3000 is a long oil air-drying alkyd, derived from linoleic-rich oil, esterified with pentaerythritol, and supplied as a solution in aliphatic naphtha. This product is ideal for use in interior and exterior decorative enamels, topside and mar...展开 Crestakyd® 10-3000 is a long oil air-drying alkyd, derived from linoleic-rich oil, esterified with pentaerythritol, and supplied as a solution in aliphatic naphtha. This product is ideal for use in interior and exterior decorative enamels, topside and marine paints, undercoats, maintenance primers, and floor varnishes. 收起
Crestakyd® 10-3002 Scott Bader Crestakyd® 10-3002 is a high viscosity, long oil, air-drying alkyd derived from linoleic rich oil, esterified with pentaerythritol, and supplied as a solution in aliphatic naphtha. This product is ideal for use in interior and exterior decorative enamels,...展开 Crestakyd® 10-3002 is a high viscosity, long oil, air-drying alkyd derived from linoleic rich oil, esterified with pentaerythritol, and supplied as a solution in aliphatic naphtha. This product is ideal for use in interior and exterior decorative enamels, topside and marine paints, undercoats, maintenance primers, and floor varnishes. 收起
Crestakyd® 10-3507 Scott Bader Crestakyd® 10-3507 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention properties. This product is ideal for use in decorative gloss paints and varnishe...展开 Crestakyd® 10-3507 is a long oil air-drying alkyd that displays fast drying, excellent brushability and flow characteristics, and good weather resistance and gloss retention properties. This product is ideal for use in decorative gloss paints and varnishes. 收起
Crestakyd® 20-5024 Scott Bader Crestakyd® 20-5024 is a medium oil, air-drying, chain stopped alkyd that exhibits excellent drying, gloss, and weathering properties. This product is ideal for use in air-drying and low bake industrial finishes.
Crestakyd® 20-5029 Scott Bader Crestakyd® 20-5029 is a medium oil, air-drying, chain-stopped alkyd that displays excellent drying, gloss, and weathering characteristics. This product is ideal for use in air-dry primers and industrial finishes.
Crestakyd® 20-5036 Scott Bader Crestakyd® 20-5036 is a medium oil, air-drying, chain-stopped alkyd that displays excellent drying, gloss, and weathering properties. This product is ideal for use in air-drying primers and industrial finishes.
Crestakyd® 20-6051 Scott Bader Crestakyd® 20-6051 is a medium oil, air-drying, chain-stopped alkyd that displays excellent drying, gloss, and weathering properties. This product is ideal for use in primers and other air-drying industrial finishes.
Crestakyd® 20-9021 Scott Bader Crestakyd® 20-9021 is a medium oil, air-drying, high viscosity, chain-stopped alkyd that displays excellent gloss, weather resistance, and flow characteristics. This product is ideal for use in air drying primers and industrial finishes.
Crestakyd® 20-9509 Scott Bader Crestakyd® 20-9509 is a high solids, medium oil alkyd, based on linoleic rich fatty acids and supplied in butyl acetate. It is designed for use in acid curing wood coating finishes. Coating systems based on this resin exhibit fast cure, excellent pot-life...展开 Crestakyd® 20-9509 is a high solids, medium oil alkyd, based on linoleic rich fatty acids and supplied in butyl acetate. It is designed for use in acid curing wood coating finishes. Coating systems based on this resin exhibit fast cure, excellent pot-life, and good wet heat resistance. 收起
Crestakyd® 30-5005 Scott Bader Crestakyd® 30-5005 is a short oil air-drying alkyd that exhibits fast drying and good hardness development. This product is ideal for use in air-drying primers and finishes for wood and metal.
Crestakyd® 30-5016 Scott Bader Crestakyd® 30-5016 is a short oil, air-drying, chain-stopped alkyd based on mixed non-yellowing oils. It displays excellent resistance to oils, greases, and water. This product is ideal for use in rapid drying industrial paints, low bake enamels, and vehi...展开 Crestakyd® 30-5016 is a short oil, air-drying, chain-stopped alkyd based on mixed non-yellowing oils. It displays excellent resistance to oils, greases, and water. This product is ideal for use in rapid drying industrial paints, low bake enamels, and vehicle and machinery finishes. 收起
Crestakyd® 30-5018 Scott Bader Crestakyd® 30-5018 is a short oil alkyd derived from linoleic-rich fatty acids and supplied in xylene. It displays excellent cold check properties as well as good wet-heat resistance and stackability. This product is specially designed for use in industri...展开 Crestakyd® 30-5018 is a short oil alkyd derived from linoleic-rich fatty acids and supplied in xylene. It displays excellent cold check properties as well as good wet-heat resistance and stackability. This product is specially designed for use in industrial wood coatings and acid-curing wood finishes. 收起
Crestakyd® 30-5028 Scott Bader Crestakyd® 30-5028 is a short oil alkyd displaying good color retention. It works well as a plasticizer for nitrocellulose and in combination with low reactivity amino resins for acid curing processes. This product is ideal for use in industrial wood and ...展开 Crestakyd® 30-5028 is a short oil alkyd displaying good color retention. It works well as a plasticizer for nitrocellulose and in combination with low reactivity amino resins for acid curing processes. This product is ideal for use in industrial wood and metal stove finishes, stoving enamels, and automotive finishes. 收起
Crestakyd® 30-5034 Scott Bader Crestakyd® 30-5034 is a low colour, short oil alkyd intended primarily for use in wood coatings. It can be used in combination with topcoats and nitrocellulose sealers. Coatings formulated with this product typically exhibit rapid solvent release and good...展开 Crestakyd® 30-5034 is a low colour, short oil alkyd intended primarily for use in wood coatings. It can be used in combination with topcoats and nitrocellulose sealers. Coatings formulated with this product typically exhibit rapid solvent release and good cold check resistance. 收起
Crestakyd® 30-5042 Scott Bader Crestakyd® 30-5042 is a short oil air-drying alkyd, provided in xylene, that exhibits fast drying properties. This product is ideal for use in air-dry and force-dry primers and topcoats in a variety of general industrial metal coating applications.
Crestakyd® 30-5500 Scott Bader Crestakyd® 30-5500 is a short oil, air-drying, chain-stopped alkyd, derived from linoleic-rich fatty acids and supplied in xylene. High solids content helps to ensure VOC compliance in final formulations. This product is ideal for use in low VOC industria...展开 Crestakyd® 30-5500 is a short oil, air-drying, chain-stopped alkyd, derived from linoleic-rich fatty acids and supplied in xylene. High solids content helps to ensure VOC compliance in final formulations. This product is ideal for use in low VOC industrial applications such as air-drying topcoats, DTM primers, one coat primer systems, and paints. 收起
Crestakyd® 30-8062 Scott Bader Crestakyd® 30-8062 is a short oil air-drying alkyd that displays quick drying and high hardness properties. This product is ideal for use in air-drying primers and finishes for metal and wood, as well as road marking paints.
Crestakyd® 30-9055 Scott Bader Crestakyd® 30-9055 is a short oil air-drying alkyd that displays fast drying, excellent stability, and outstanding cold check properties. This product is ideal for use in wood coatings and easy-sanding NC sealers and NC finishes.
Crestakyd® 30-9502 Scott Bader Crestakyd® 30-9502 is a short oil, air-drying, chain-stopped alkyd derived from linoleic-rich fatty acids and supplied in a 3:2 w/w blend of xylene:methoxy propanol. It displays high solids content - which helps to ensure VOC compliance in final formulati...展开 Crestakyd® 30-9502 is a short oil, air-drying, chain-stopped alkyd derived from linoleic-rich fatty acids and supplied in a 3:2 w/w blend of xylene:methoxy propanol. It displays high solids content - which helps to ensure VOC compliance in final formulations - and excellent salt spray resistance. This product is ideal for use in low VOC industrial applications such as air-drying topcoats, DTM primers, one coat primer systems, and paints. 收起
Crestakyd® 41-5009 Scott Bader Crestakyd® 41-5009 is a styrene-modified short oil alkyd, consisting of a blend of mixed non-yellowing oils in xylene. This product is ideal for use in air-dried and low-bake general purpose finishes as well as quick-drying primers, enamels, and hammer fi...展开 Crestakyd® 41-5009 is a styrene-modified short oil alkyd, consisting of a blend of mixed non-yellowing oils in xylene. This product is ideal for use in air-dried and low-bake general purpose finishes as well as quick-drying primers, enamels, and hammer finishes. 收起
Crestakyd® 41-5013 Scott Bader Crestakyd® 41-5013 is a styrene-modified epoxy ester, consisting of a mix of non-yellowing oils and supplied in xylene. It provides excellent chemical and corrosion resistance. This product is recommended for use in air-drying and stoving coatings for che...展开 Crestakyd® 41-5013 is a styrene-modified epoxy ester, consisting of a mix of non-yellowing oils and supplied in xylene. It provides excellent chemical and corrosion resistance. This product is recommended for use in air-drying and stoving coatings for chemical plants, industrial surface primers, and automobile primers. 收起
Crestakyd® 41-6010 Scott Bader Crestakyd® 41-6010 is a styrene-modified short oil alkyd, consisting of a blend of mixed non-yellowing oils and supplied as a solution in high-boiling aromatic solvents. It displays high levels of cohesion, adhesion, and flexibility. This product is ideal...展开 Crestakyd® 41-6010 is a styrene-modified short oil alkyd, consisting of a blend of mixed non-yellowing oils and supplied as a solution in high-boiling aromatic solvents. It displays high levels of cohesion, adhesion, and flexibility. This product is ideal for use in air-dry, low-bake, and general purpose industrial stoving paints, as well as enamels, primers, and hammer finishes. 收起
Crestakyd® 44-5014 Scott Bader Crestakyd® 44-5014 is a rosin- and phenolic-modified, short oil, air-drying alkyd derived from a combination of linoleic and tung oils and supplied as a solution in xylene. It displays fast drying, exceptional adhesion, and excellent chemical resistance. ...展开 Crestakyd® 44-5014 is a rosin- and phenolic-modified, short oil, air-drying alkyd derived from a combination of linoleic and tung oils and supplied as a solution in xylene. It displays fast drying, exceptional adhesion, and excellent chemical resistance. This product is ideal for use in non-lifting primers, nitorcellulose lacquers, alkyd finishes, petrol- and oil-resistant paints, machinery finishes, and quick-drying automotive primers. 收起
Crestakyd® 44-5027 Scott Bader Crestakyd® 44-5027 is a rosin- and phenolic-modified, short oil alkyd that displays rapid drying, high resistance to water, fuels, and oil, and good flexibility and adhesion to metallic substrates. This product is ideal for use in fast-drying primers that...展开 Crestakyd® 44-5027 is a rosin- and phenolic-modified, short oil alkyd that displays rapid drying, high resistance to water, fuels, and oil, and good flexibility and adhesion to metallic substrates. This product is ideal for use in fast-drying primers that can be over-coated with nitrocellulose and other finishes. 收起
Crestakyd® 44-5043 Scott Bader Crestakyd® 44-5043 is a rosin- and phenolic-modified short oil alkyd, supplied as a 60% non-volatile solution in xylene. This product is designed for use in fast-drying industrial primer applications.
HELLUTEL™ HEC HR 1000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardan...展开 HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC HR 2000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC HR 3000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC HR 4000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC MR 2000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC MR 300 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant,...展开 HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC MR 5000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
Hydroxypropyl Starch Ether Shandong Yiteng Chemical Limited Liability Company Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including ad...展开 Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including adhesives, coating or organic liquids for building materials. 收起
K-CURE® 1040 King Industries, Inc. K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatin...展开 K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatings, appliance finishes, and printing inks. 收起
K-CURE® 1040W King Industries, Inc. K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water sys...展开 K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water systems. It is soluble in water, alcohol, and also glycols. This product can be applied to water based wood coatings, paper coatings, and printing inks. 收起
K-CURE® 129B King Industries, Inc. K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal sub...展开 K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal substrates because of its corrosive nature. This product offer fast curing, and high acid value which allows lower does levels. This is a product that is soluble in water, alcohol, and glycols. It can be applied to wood, paper, and plastic coatings. 收起
K-FLEX® 148 King Industries, Inc. K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosit...展开 K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primers, coil coatings, overprint varnishes, and general industrials. 收起
K-FLEX® 171-90 King Industries, Inc. K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers lon...展开 K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers long pot life, enhanced adhesion and flexibility. Because of its lower hydroxyl number, K-FLEX® 171-90 requires less crosslinker. K-FLEX® 171-90 can also be used as a modifier of aminoplast crosslinked coatings, inks and adhesives to enhance flexibility and adhesion. It appears as a clear, light straw liquid and offers high resistivity and low temperature cure. This product is soluble in esters, ketones, alcohols, aromatic 100 and aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be used in office furniture coatings, 2K urethane coatings, appliance coatings, elastomeric coatings, coil coatings, and epoxy flexibilizer. 收起
K-FLEX® 188 King Industries, Inc. K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure p...展开 K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure produce exceptional and consistent performance and broad compatibility. K-FLEX® 188's primary hydroxyl groups also produce reactivity with epoxies in cationic thermal cure systems. This product is 100% active and offers, good flexibility, adhesion to plastics, and high resistivity. It appears as a clear, light straw liquid and is soluble in the aerospace, automotive refinish, and marine maintenance industries along with plastic substrates, overprint varnishes, glass laminates, and optical coatings. 收起
K-FLEX® 7301 King Industries, Inc. K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It i...展开 K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. 收起
K-FLEX® A307 King Industries, Inc. K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimize...展开 K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimizes the crosslinker demand. It offers improved flexibility, light color, abrasion resistance, good balance of surface dry and pot life in 2K PU, and no acid functionality. It appears as a clear viscous liquid and is soluble in esters, alcohols, xylene, ketones, aromatic 100, and aromatic 150. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, industrial maintenance, aerospace, and plastic coatings. 收起
K-FLEX® A308 King Industries, Inc. K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed togeth...展开 K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed together with higher hydroxyl number gives good adhesion and hardness with lower VOC levels. K-FLEX® A308 appears as a offers enhanced flexibility, light color, a balance of surface dry/pot life in 2K PU, no acid functionality, and abrasion resistance. It is soluble in esters, alcohols, Aromatic 100, Aromatic 150, ketones, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, plastic coatings, industrial maintenance, and aerospace. 收起
K-FLEX® UD-320 King Industries, Inc. K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent...展开 K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent. This product has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 enhances the hardness of melamine crosslinked systems. When used to modify a 2-component polyurethane, it will enhance hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems. It also offers benefits like low VOC, chemical resistance, exterior durability, QUV resistance, and hydrolytic stability. This product can be used for machine/equipment coatings, automotive coatings, appliance coatings, wood and paper coatings, and aerospace coatings. 收起
K-FLEX® UD-320-100 King Industries, Inc. K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the u...展开 K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the use of isocyanates. It appears as a viscous clear liquid and offers a low VOC, enhanced hardness, exterior durability, hydrolytic stability, QUV resistance, and is solvent and isocyanate free. This product is soluble in almost all organic solvents excluding aliphatic and aromatic hydrocarbons. The only was to get aromatic solubility is to combine it with a hydrogen bonding solvent. K-FLEX® UD-320-100 can be applied in industries like paper, automotive, wood, leather, and screen printing ink. 收起
K-FLEX® UD-350W King Industries, Inc. K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350...展开 K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to enhance crosslink density, solids, film/resistance properties, and flow/leveling. It appears as a straw colored liquid and offers low VOC, water solubility, hardness, chemical resistance, hydrolytic stability, QUV resistance, and exterior durability. This is a product that is not soluble in aromatic and aliphatic hydrocarbons. It can used in making, coil coatings, wood coatings, can coatings, dip coatings, appliance coatings, automotive coatings, and overprint varnishes. 收起
K-FLEX® XM-3307 King Industries, Inc. K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appear...展开 K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appears as a viscous liquid and offers fast dispersion time, high pigment loading, and high pigment transparency. It is soluble in ketones, alcohols, esters, aromatic hydrocarbons, and is not soluble in aliphatic hydrocarbons. It can be soluble in water if it is neutralized with an organic amine. K-FLEX® XM-3307 can also be applied in water-based coatings, solvent-based coatings, and can be used as an intercoat adhesion promoter. 收起
K-FLEX® XM-332 King Industries, Inc. K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...展开 K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. 收起
K-FLEX® XM-337 King Industries, Inc. K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...展开 K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. 收起
K-FLEX® XM-359 King Industries, Inc. K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a goo...展开 K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a good balance of flexibility with hardness, good exterior durability plus great solubility in many different solvents including exempt solvents. It appears as a clear, light straw liquid and provides optical clarity and low color along with good compatibility. This product is soluble in esters, ketones, alcohols, aromatic 100, aromatic 150, xylene, t-butyl acetate, and Oxsol 100. It is partially soluble in mineral spirits, and insoluble in water. It is applied in plastic coatings, optically clear coatings, elastomers and laminates. 收起
K-FLEX® XM-360 King Industries, Inc. K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility ...展开 K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility with hardness, excellent exterior durability plus excellent solubility in many different solvents. This product offers good compatibility and solubility, optical clarity and low color, and it is 100% active. It appears as a light straw liquid and is soluble in ketones, aromatics, alcohols, glycols, glycol ethers, esters, and is insoluble in water. It can be applied in the aerospace industry, automotive refinishes, plastic coatings, marine maintenance, and optically clear coatings, elastomers, and laminates. 收起
K-FLEX® XM-366 King Industries, Inc. K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. I...展开 K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. It appears as a clear liquid that is light in color and offers good compatibility and solubility. This product is soluble in glycols, glycol ethers, alcohols, esters, aromatics, ketones, and is insoluble in aliphatic hydrocarbons and water. It can be applied in plastic coatings, aerospace, automotive OEM & refinishes, and VOC compliant systems. 收起
K-FLEX® XM-B301 King Industries, Inc. K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisoc...展开 K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates. This product appears as a clear amber liquid and offers reduced induction time, adhesion, corrosion resistance, viscosity reduction, and elimates solvent popping and pinholes. It is soluble in esters, alcohols, aromatics, and ketones. It is insoluble in aliphatic hydrocarbons and water. K-FLEX® XM-B301 can be applied in epoxy-polyamide primers for industries like aerospace, automotive, marine, truck/bus/rail, and industrial maintenance. 收起
K-KAT® 348 King Industries, Inc. K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a cl...展开 K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a clear, straw liquid and offers great catalysis of secondary hydroxyls, gloss retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is limited in solubility in alcohols and esters and is insoluble in water. K-KAT® 348 can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams and coatings, and cationic coatings. 收起
K-KAT® 4205 King Industries, Inc. K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack fr...展开 K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack free time along with good viscosity stability. It is effective at low metal concentrations and also effective with a mix of isocyanates and polycols. K-KAT® 4205 is soluble in ketones, aromatic hydrocarbons, and esters. It can be applied to automotive topcoats, maintenance coatings, structural plastics coatings, and aerospace coatings. 收起
K-KAT® 5218 King Industries, Inc. K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the ...展开 K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the addition of 2,4-pentanedione, fast tack free time, exterior durability, and is effective with a variety of isocyanates and polyols. It appears as a slightly hazy, amber liquid and can be applied in automotive topcoats, aerospace coatings, maintenance coatings, and coatings for structural plastics. This product is soluble in ketones, esters, glycol ethers, alcohols, and aromatic hydrocarbons. 收起
K-KAT® 6212 King Industries, Inc. K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability a...展开 K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability along with a short tack free time. This product doesn't add to the hydrolysis of polyester resins and high selectivity for NCO/OH reactions over NCO/water reaction. It is soluble in esters, alcohols, ketones, aliphatic and aromatic hydrocarbons, glycol ethers, and glycol ether acetates. It is only partially soluble in water. It can be applied to adhesives, polyurethane coatings, casting resins and polyurethane resin synthesis, RIM, and water-based two component coatings. 收起
K-KAT® 670 King Industries, Inc. K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be...展开 K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be applied in ambient cured 1 component organosilane and 2 component organosilane hybrid coatings, caulks, adhesives, elastomers, and sealants. 收起
K-KAT® XC-B221 King Industries, Inc. K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawb...展开 K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawbacks. This product offers good glass retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. K-KAT® XC-B221 is soluble in butanol, ethanol, methanol, isopropanol, glycol ethers, glycol ether acetates, aliphatic and aromatic hydrocarbons, and is insoluble in water. This product appears as a clear, straw liquid and can be applied in 2K, blocked isocyanate coatings, urethane elastomers, foams, coatings, and cationic electro-coatings. 收起
K-KAT® XK-614 King Industries, Inc. K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing...展开 K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing time qualities. It also has good hydrolytic stability and exterior durability. This product has non-yellowing ability and great gloss retention characteristics. It appears as a light, yellow liquid, is soluble in alcohols, and is insoluble in water. 收起
K-KAT® XK-617 King Industries, Inc. K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant withou...展开 K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant without the concern of toxicity. It appears as a pale, light amber liquid, offers good cure response, and is environmentally more acceptable. This product is soluble in glycol ethers, n-butanol, ketones, aliphatics. aromatics, and is partially soluble in water. It is normally applied in 2K urethanes for cast elastomers. 收起
K-KAT® XK-620 King Industries, Inc. K-KAT® XK-620 is a novel tin free stimulant produced for use in epoxy and blocked isocyanates based cationic electro-coatings. It is supplied at 90% active in 2-butoxyethanol for ease of incorporation. It appears as a pale, yellow liquid and offers good c...展开 K-KAT® XK-620 is a novel tin free stimulant produced for use in epoxy and blocked isocyanates based cationic electro-coatings. It is supplied at 90% active in 2-butoxyethanol for ease of incorporation. It appears as a pale, yellow liquid and offers good corrosion resistance, and low temperature cure response. This product is soluble in glycols, glycol ethers, alcohols, and is insoluble in water. 收起
K-KAT® XK-628 King Industries, Inc. K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appear...展开 K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appears as a clear, amber liquid and is a made to give enhanced hydrolytic stability. This product offers good exterior ability, gloss retention, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is partially soluble in alcohols, esters, and is insoluble in water. This product can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams, and coatings. 收起
K-KAT® XK-635 King Industries, Inc. K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...展开 K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 100% active, weighs 9.5 lbs per gallon, and has a specific gravity of 1.14 g/ml. 收起
K-KAT® XK-639 King Industries, Inc. K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...展开 K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 50% active in isopropanol, weighs 7.6 lbs per gallon, and has a specific gravity of 0.91 g/ml. 收起
K-KAT® XK-640 King Industries, Inc. K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the env...展开 K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the environmental drawbacks. K-KAT® XK-640 is a designed to provide improved hydrolytic stability compared to other bismuth carboxylate catalysts. This product is soluble in glycol ethers, aliphatics, and aromatics, has partial solubility in alcohols and esters, and is insoluble in water. It appears as a clear, amber liquid, is 18% metal, and can be applied in ambient, force dry and bake systems, 2K and blocked isocyanate coatings, and in the production of urethane coatings. 收起
K-KAT® XK-651 King Industries, Inc. K-KAT® XK-651 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate, two component urethanes, and one and two component silane terminated coatings. K-KAT® XK-651 is made to give good hydrolytic stability. This product has good ...展开 K-KAT® XK-651 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate, two component urethanes, and one and two component silane terminated coatings. K-KAT® XK-651 is made to give good hydrolytic stability. This product has good gloss retention, exterior durability, can replace tin stimulants, and good solubility. It is soluble in glycol ethers, aliphatics, aromatics, has partial solubility in alcohols and esters, and is not soluble in water. It can be applied in 2K and blocked isocyanate coatings, and in the production of urethane elastomers, foams, and coatings. 收起
K-PURE® CDI-4301 King Industries, Inc. K-PURE® CDI-4301 is a corrosion inhibitor made to be used in electronics applications and appears as a clear amber liquid. This product offers good solubility in water, glycols, and also alcohols. It can be applied in CMP and electronic cleaning solutions...展开 K-PURE® CDI-4301 is a corrosion inhibitor made to be used in electronics applications and appears as a clear amber liquid. This product offers good solubility in water, glycols, and also alcohols. It can be applied in CMP and electronic cleaning solutions and has a density of 0.99 g/ml. 收起
K-PURE® CDI-4302 King Industries, Inc. K-PURE® CDI-4302 is a corrosion inhibitor made to be used in electronics applications and appears as a clear amber liquid. This product offers good solubility in water, glycols, and also alcohols. It can be applied in CMP and electronic cleaning solutions...展开 K-PURE® CDI-4302 is a corrosion inhibitor made to be used in electronics applications and appears as a clear amber liquid. This product offers good solubility in water, glycols, and also alcohols. It can be applied in CMP and electronic cleaning solutions and has a density of 1.15 g/ml. 收起
K-PURE® CDI-4303 King Industries, Inc. K-PURE® CDI-4303 is a 100% active organic liquid corrosion inhibitor that is based on a proprietary amino acid derivative. It appears as a dark amber liquid and is soluble in polar solvents and water. This product can be applied in corrosion inhibiting co...展开 K-PURE® CDI-4303 is a 100% active organic liquid corrosion inhibitor that is based on a proprietary amino acid derivative. It appears as a dark amber liquid and is soluble in polar solvents and water. This product can be applied in corrosion inhibiting coatings, water-based cleaning & polishing formations, and can be used as a flash rust inhibitor for water-based coatings. 收起
K-PURE® CDI-4308 King Industries, Inc. K-PURE® CDI-4308 is a 100% active organic liquid additive that is based on a proprietary heterocyclic amine derivative. K-PURE® CDI-4308 has an affinity for soft metals, which can help with corrosion prevention, adhesion promotion and lubrication. K-PURE®...展开 K-PURE® CDI-4308 is a 100% active organic liquid additive that is based on a proprietary heterocyclic amine derivative. K-PURE® CDI-4308 has an affinity for soft metals, which can help with corrosion prevention, adhesion promotion and lubrication. K-PURE® CDI-4308 was created for solvent based and solventless systems. It appears as a clear amber liquid and offers low viscosity, compatibility with many solvents & resins, and it is a solventless liquid. This product can be used in any application that needs corrosion prevention. 收起
K-PURE® CDI-4312 King Industries, Inc. K-PURE® CDI-4312 is a 100% active organic liquid additive that is made to passivate the corrosion of aluminum, copper, and silver. It is good for protecting different kinds of metals in polar solvents and also water. This product can be applied in cleaner...展开 K-PURE® CDI-4312 is a 100% active organic liquid additive that is made to passivate the corrosion of aluminum, copper, and silver. It is good for protecting different kinds of metals in polar solvents and also water. This product can be applied in cleaners, CMP slurries, strippers, and adhesives & coatings. 收起
K-PURE® CDR-3314 King Industries, Inc. K-PURE® CDR-3314 is a reactive, aliphatic polyester polyol, that is suggested for modifying cationic cured epoxy systems, aminoplast resins and siloxanes to give improvements in adhesion and flexibility. Its uniform, narrow molecular weight distribution a...展开 K-PURE® CDR-3314 is a reactive, aliphatic polyester polyol, that is suggested for modifying cationic cured epoxy systems, aminoplast resins and siloxanes to give improvements in adhesion and flexibility. Its uniform, narrow molecular weight distribution and original chemical structure produce consistent performance and compatibility. This product appears as a clear, light straw liquid and offers good flexibility, resistivity, low VOC, and adhesion promotion. It is soluble in esters, xylene, ketones, alcohols, aromatic 100 & aromatic 150, and is insoluble in water. It can be applied in conductive adhesives, dielectric adhesives, anti-reflective coatings, and conformal coatings. 收起
K-PURE® CDR-3315 King Industries, Inc. K-PURE® CDR-3315 is a low viscosity, 100% solids, fully saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to lower modulus, improve flexibility and enhance adhesion in cationic cured epoxies, aminoplast resins, siloxa...展开 K-PURE® CDR-3315 is a low viscosity, 100% solids, fully saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to lower modulus, improve flexibility and enhance adhesion in cationic cured epoxies, aminoplast resins, siloxanes and isocyanate systems. K-PURE® CDR-3315 can also ehnance the toughness of very brittle systems at low levels. It appears as a clear, light straw liquid and offers high resistivity. This product is soluble in esters, alcohols, ketones, aromatic 100 & aromatic 150, xylene, and is insoluble in water. It can be applied in anti reflective coatings, conformal coatings, and conductive & dielectric adhesives. 收起
K-PURE® CDR-3316 King Industries, Inc. K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations includ...展开 K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations include cationic cured epoxies, aminoplast, siloxane and urethane based systems. It appears as a clear, light straw liquid and offers adhesion promotion and resistivity. This product is soluble in esters, alcohols, xylene, aromatic 100 & aromatic 150, ketones, and is insoluble in water. It can be applied in anti-reflective coatings, conformal coatings, and conductive & dielectric adhesives. 收起
K-PURE® CDR-3317 King Industries, Inc. K-PURE® CDR-3317 is an aliphatic, low molecular weight urethane diol oligomer, supplied at 100% solids. It is suggested to be used in systems that require adhesion promotion, chemical resistance, and hardness development. K-PURE® CDR-3317 is ideal for ami...展开 K-PURE® CDR-3317 is an aliphatic, low molecular weight urethane diol oligomer, supplied at 100% solids. It is suggested to be used in systems that require adhesion promotion, chemical resistance, and hardness development. K-PURE® CDR-3317 is ideal for aminoplast resins, siloxanes and urethanes. K-PURE® CDR-3317 also acts as a compatibilizer or coalescing aid, with the benefit of co-reacting with the system. It appears as a viscous, clear liquid and offers low VOC. This product is soluble in water, almost all organic solvents, and is insoluble in aromatic solvents. It can be applied in conformal coatings, adhesives & sealants, and anti reflective coatings. 收起
K-PURE® CXC-1612 King Industries, Inc. K-PURE® CXC-1612 is an antimony hexafluoride based catalyst that is for thermal initiated cationic polymerization. It appears as an off white powder and offers viscosity stability, cure response, and solubility. This product can be applied in PWB, conform...展开 K-PURE® CXC-1612 is an antimony hexafluoride based catalyst that is for thermal initiated cationic polymerization. It appears as an off white powder and offers viscosity stability, cure response, and solubility. This product can be applied in PWB, conformal coatings, cleaners & strippers, and adhesives & sealants. 收起
K-PURE® CXC-1614 King Industries, Inc. K-PURE® CXC-1614 is a blocked acid stimulant that is based on a super acid. K-PURE® CXC-1614 can catalyze the reaction of epoxy resins, ring opening of cyclic either groups, and polymerization of monomers sensitive to cationic polymerization. This product...展开 K-PURE® CXC-1614 is a blocked acid stimulant that is based on a super acid. K-PURE® CXC-1614 can catalyze the reaction of epoxy resins, ring opening of cyclic either groups, and polymerization of monomers sensitive to cationic polymerization. This product appears as white crystals and offers viscosity stability, thermal Initiation, and fast cure response. It can be applied in PWB, conformal coatings, and adhesives & sealants. K-PURE® CXC-1614 is soluble in propylene carbonate, acetone, and is insoluble in aliphatic & aromatic hydrocarbons, alcohols, and water. 收起
K-PURE® CXC-1615 King Industries, Inc. K-PURE® CXC-1615 is an amine salt of trifluoromethanesulfonic acid that is suggested to be used in thermal initiated cationic polymerization of cycloaliphatic epoxies, epoxy esters and epoxy ether resins. It also functions as a stimulant for condensation ...展开 K-PURE® CXC-1615 is an amine salt of trifluoromethanesulfonic acid that is suggested to be used in thermal initiated cationic polymerization of cycloaliphatic epoxies, epoxy esters and epoxy ether resins. It also functions as a stimulant for condensation reactions with amino resins and benzoxazine resins. It appears as an amber liquid and is 60% active. This product is soluble in alcohols, water, glycols, glycol ethers, ketones, and carbonates. It is not soluble in aliphatic and aromatic hydrocarbons. 收起
K-PURE® CXC-1765 King Industries, Inc. K-PURE® CXC-1765 is a zinc complex stimulantt for cross linking of epoxy/carboxylic and epoxy/anhydride functional resins. K-PURE® CXC-1765 catalyzes the reaction of glycidyl ether, ester, cycloaliphatic epoxies and epoxidized oils with carboxyl and anhyd...展开 K-PURE® CXC-1765 is a zinc complex stimulantt for cross linking of epoxy/carboxylic and epoxy/anhydride functional resins. K-PURE® CXC-1765 catalyzes the reaction of glycidyl ether, ester, cycloaliphatic epoxies and epoxidized oils with carboxyl and anhydride groups. K-PURE® CXC-1765 offers enhances storage stability, thermal stability, and low color relative to amine catalyzed formulations. 收起
K-PURE® TAG-2172 King Industries, Inc. K-PURE® TAG-2172 is an amine blocked Dodecylbenzenesulfonic acid (DDBSA) that is used as a thermal acid generator. Usual activation ranges from 140°C to 190°C depending upon the circumstances of the formation and application. This product appears as a cle...展开 K-PURE® TAG-2172 is an amine blocked Dodecylbenzenesulfonic acid (DDBSA) that is used as a thermal acid generator. Usual activation ranges from 140°C to 190°C depending upon the circumstances of the formation and application. This product appears as a clear, light color liquid and offers viscosity stability, broad solubility, and low trace metals. It is soluble in alcohols, water, glycols, glycol ethers, esters, aliphatic & aromatic hydrocarbons, and ketones. 收起
K-PURE® TAG-2678 King Industries, Inc. K-PURE® TAG-2678 is a quaternary ammonium blocked triflic acid thermal acid generator specifically made to be used in thermally cured microlithography coatings. It has a sharp activation profile and does not provide any volatile components when activated....展开 K-PURE® TAG-2678 is a quaternary ammonium blocked triflic acid thermal acid generator specifically made to be used in thermally cured microlithography coatings. It has a sharp activation profile and does not provide any volatile components when activated. K-PURE® TAG-2678 is ideally appropriate for amino crosslinkable melamine, self-condensed melamine, glycoluril, urea or silanol and alkoxysilane crosslinkable resins. K-PURE® TAG-2678 can also be used to stimulize the polymerization of epoxy resins and ring opening polymerization of cyclic ethers as well as other monomers capable of undergoing cationic polymerization. This product appears as white crystals and is soluble in PGME, ethyl lactate, acetone, and propylene carbonate. It has limited solubility in PGMEA and is almost insoluble in water. 收起
K-PURE® TAG-2713 King Industries, Inc. K-PURE® TAG-2713 is a semiconductor grade amine blocked thermal acid generator made to be used in microlithography coatings. Its activation range is between 120°C and 140°C depending upon time, formulation components and film thickness. K-PURE® TAG-2713 i...展开 K-PURE® TAG-2713 is a semiconductor grade amine blocked thermal acid generator made to be used in microlithography coatings. Its activation range is between 120°C and 140°C depending upon time, formulation components and film thickness. K-PURE® TAG-2713 is ideally appropriate as a stimulant for amino cross-linkable melamine, self-condensed melamine, glycoluril, urea, or silanol and alkoxysilane cross-linkable resins. KPURE ® TAG-2713 can also be used in any lithography application where the rapid and selective generation of a strong acid is needed. This product appears as a clear solution and is soluble in ethyl lactate, water, and butanol. It is only partially soluble in PGMEA. 收起
K-SPERSE® 131 King Industries, Inc. K-SPERSE® 131 is a wetting and dispersing agent for all types of pigments. It is a calcium salt of an alkyl aryl sulfonic acid dissolved in an aliphatic solvent and is suggested for use in solvent based coatings and inks. This product appears as a clear a...展开 K-SPERSE® 131 is a wetting and dispersing agent for all types of pigments. It is a calcium salt of an alkyl aryl sulfonic acid dissolved in an aliphatic solvent and is suggested for use in solvent based coatings and inks. This product appears as a clear and dark amber liquid and offers fast dispersion rate, low dispersant levels, good color and gloss, high pigment loading, and corrosion resistance. It is made to be applied in difficult to disperse pigments like acrylic, alkyd, polyester, chlorinated rubber, bituminous, and polyurethane pigments. 收起
K-SPERSE® 152 King Industries, Inc. K-SPERSE® 152 is a wetting and dispersing agent for all types of pigments and has a specific gravity of 1.0 g/ml. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is suggested to be used in all solvent based coatings...展开 K-SPERSE® 152 is a wetting and dispersing agent for all types of pigments and has a specific gravity of 1.0 g/ml. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is suggested to be used in all solvent based coatings and inks. This product appears as a clear, dark amber liquid and offer good color & gloss, high pigment loading, transparency, and humidity and corrosion resistance. It is suggested to be used in hard to disperse pigments like polyester, alkyd, acrylic, chlorinated rubber, bituminous, and polyurethane pigments. 收起
K-SPERSE® 152MS King Industries, Inc. K-SPERSE® 152MS is a wetting and dispersing agent for all types of pigments and has a specific gravity of 0.96 g/ml. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is suggested to be used in all solvent based coati...展开 K-SPERSE® 152MS is a wetting and dispersing agent for all types of pigments and has a specific gravity of 0.96 g/ml. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is suggested to be used in all solvent based coatings and inks. This product appears as a clear, dark amber liquid and offer good color & gloss, high pigment loading, transparency, and humidity and corrosion resistance. It is suggested to be used in hard to disperse pigments like polyester, alkyd, acrylic, chlorinated rubber, bituminous, and polyurethane pigments. 收起
K-SPERSE® 5100 King Industries, Inc. K-SPERSE® 5100 is a solvent free wetting/dispersing agent for solventless epoxy systems. This low molecular weight product contains hydroxyl and carboxyl functionality and is suggested to be used for both organic and inorganic pigments and fillers. It app...展开 K-SPERSE® 5100 is a solvent free wetting/dispersing agent for solventless epoxy systems. This low molecular weight product contains hydroxyl and carboxyl functionality and is suggested to be used for both organic and inorganic pigments and fillers. It appears as a clear, light straw liquid and offers water resistance, high pigment loading, good color and gloss, and reduces viscosity and grinding time. It is really useful in 100% solids epoxy systems and is also effective with either organic or inorganic pigments that use high shear dispersion equipment. This product is soluble in esters, alcohols, glycol ethers, glycols, ketones, and aromatic solvents. K-SPERSE® 5100 is insoluble in aliphatic hydrocarbons. 收起
K-SPERSE® 6501 King Industries, Inc. K-SPERSE® 6501 is a pigment dispersing agent that is based on a zinc salt of an alkyl aryl sulfonic acid adsorbed onto a silica carrier. This product appears as a light tan powder, is 50% active, and offers high pigment loading, good color, enhances hidin...展开 K-SPERSE® 6501 is a pigment dispersing agent that is based on a zinc salt of an alkyl aryl sulfonic acid adsorbed onto a silica carrier. This product appears as a light tan powder, is 50% active, and offers high pigment loading, good color, enhances hiding power, good humidity/corrosion resistance, and is easy to incorporate. It is made to be used in powder coating applications and will increase the dispersion of inorganic and organic pigments. 收起
K-SPERSE® 6502 King Industries, Inc. K-SPERSE® 6502 is a pigment dispersing agent that is based on a calcium salt of an alkyl aryl sulfonic acid adsorbed onto a silica carrier. This product appears as a light tan powder, is 50% active, and offers high pigment loading, good color, enhances hi...展开 K-SPERSE® 6502 is a pigment dispersing agent that is based on a calcium salt of an alkyl aryl sulfonic acid adsorbed onto a silica carrier. This product appears as a light tan powder, is 50% active, and offers high pigment loading, good color, enhances hiding power, good humidity/corrosion resistance, and is easy to incorporate. It is made to be used in powder coating applications and will increase the dispersion of inorganic and organic pigments. 收起