UL Prospector

成功!

成功保存搜索结果
Request Sample AMICURE® DBU-E Evonik Resource Efficiency GmbH, BL Crosslinkers High-purity, electronic grade of diazabicyclo-undecene. Highly efficient tertiary amine accelerator. Used in electrical encapsulation and transfer moulding powders.
Request Sample AMICURE® UR2T Evonik Resource Efficiency GmbH, BL Crosslinkers Substitute for chlorophenyl ureas; co-curing accelerator for dicyandiamide-cured epoxy resins. Faster green strength adhesion build. Used in one-component paste and film adhesives, high-performance composites, and prepregs.
Request Sample ANCAMIDE 221-X70® Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...展开 ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起
Request Sample ANCAMIDE 221® Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...展开 ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起
Request Sample ANCAMIDE® 220-IPA-73 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete.
Request Sample ANCAMIDE® 220-X-70 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete.
Request Sample ANCAMIDE® 400 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展开 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起
Request Sample ANCAMINE® 2489 CURING AGENT Evonik Resource Efficiency GmbH, BL Crosslinkers 改性脂环族胺,浅色、粘度低。允许更高的填料使用量或降低对稀释剂的需求量。可提供非常快速的固化和高光泽以及抗发白性能
Request Sample ANCAREZ® AR555 Waterborne Epoxy Resin Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起
Request Sample Amicure® CG-325G Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. Applications for this produc...展开 Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component adhesives, recreational and industrial pre-preg composites, and powder coatings. 收起
Request Sample Amicure® CG-325G Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins.
Request Sample Amicure® IC-221 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self...展开 Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-221 support high aesthetics, UV stability and rapid property development for fast return to service. Amicure® IC-221 curing agent is free of solvents, alkyl phenol derivatives and benzyl alcohol. 收起
Request Sample Amicure® IC-321 Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is desi...展开 Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is designed to provide long working pot-life and high flexibility. In addition, clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-321 curing agent for polyisocyanate resin exhibit rapid property development and high aesthetics and are suitable for exterior application. 收起
Request Sample Amicure® IC133 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC133 is a polycarbamide curing agent for DTM C3 coatings. It is slower-curing compared to Amicure® IC166. This product is ideal for plural component spray systems.
Request Sample Amicure® IC166 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® IC166 is a polycarbamide curing agent for DTM C3 coatings. It is faster-curing compared to Amicure® IC133. This product is ideal for plural component spray systems.
Request Sample Amicure® UR7/10 Evonik Resource Efficiency GmbH, BL Crosslinkers Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid ...展开 Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. Amicure® UR7/10 is supplied as a micropulverized crystalline solid which is easily dispersed into liquid epoxy resin. Applications for this product include one-component paste and film adhesives, heat-cure composites, and prepreg composites. 收起
Request Sample Ancamide 2634™ Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 改性聚酰胺,设计用于双组分溶剂型环氧涂料,其中高性能和低成本是主要要求
Request Sample Ancamide® 2050 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 聚酰胺,具有高光泽、柔韧、坚硬和抗反冲击性能。无需诱导。适用于高固体份涂料和底漆、混凝土涂料、密封剂和腻子以及泳池漆
Request Sample Ancamide® 220 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings.
Request Sample Ancamide® 2353 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 聚酰胺,可形成出色的高光泽涂膜,快干,无诱导时间。涂膜硬而且具有非常好的耐溶剂和耐腐蚀性能。具有聚酰胺最佳的耐化学品性能
Request Sample Ancamide® 2396 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 改性酰胺胺,可在室温下与液体环氧树脂反应
Request Sample Ancamide® 2426 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 不含增塑剂的酰胺胺,具有长开罐使用时间和出色的抗发白性能,出色的硬度形成和良好的耐水性试剂的能力。适用于高和100%固体份涂料和底漆
Request Sample Ancamide® 2445 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers 低粘度聚酰胺,可在低温下快速固化。低胺残留量。具有高光泽、出色的硬度和柔韧性
Request Sample Ancamide® 2652 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 2652 Curing Agent is a specialpolyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings specifically developed to provide long overcoatability with epoxy and alternative resin technology.
Request Sample Ancamide® 2769 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent fre...展开 Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent free or high solids coatings with ultra low volatile organic components. 收起
Request Sample Ancamide® 350A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, b...展开 Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, but not exclusively with liquid epoxy resin. Applications for Anacamide® 350A include adhesives, sealants, putties, flexible cable jointing and high solids coatings. 收起
Request Sample Ancamide® 351A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and...展开 Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and superior adhesion properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起
Request Sample Ancamide® 375A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE™ 350A的更低粘度版本,是一种标准型高咪唑啉含量聚酰胺。适用于低VOC涂料、混凝土修补和薄泥浆以及胶粘剂
Request Sample Ancamide® 512 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cur...展开 Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cure rate or other properties. 收起
Request Sample Ancamide® 910 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel streng...展开 Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamides and DOT non-corrosive status. Ancamide® 910 curing agent can be used either as a sole curing agent or as a modifier. 收起
Request Sample Ancamine® 1618 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 1618 curing agent is a low-colour, low-viscosity, modified cycloaliphatic amine intended for ambient or low-temperature curing of liquid epoxy resins. It gives high-gloss films that are resistant to a variety of chemicals. These properties make ...展开 Ancamine® 1618 curing agent is a low-colour, low-viscosity, modified cycloaliphatic amine intended for ambient or low-temperature curing of liquid epoxy resins. It gives high-gloss films that are resistant to a variety of chemicals. These properties make it ideal for formulating floorings, maintenance coatings, tank linings, and secondary containment linings. Its very low colour and good colour stability make it appropriate for clear and pastel shade coatings. 收起
Request Sample Ancamine® 2014AS Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2014AS is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-compon...展开 Ancamine® 2014AS is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-component adhesives and solvent free laminating. 收起
Request Sample Ancamine® 2334 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resist...展开 Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resistance to dilute sulfuric acid and methanol. Appropriate applications include industrial flooring and chemically resistant coatings in food preparation areas. 收起
Request Sample Ancamine® 2337S Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...展开 Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. 收起
Request Sample Ancamine® 2712 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, faci...展开 Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine® 2712 curing agent allows the use in emission compliant coating and flooring systems. 收起
Request Sample Ancamine® 2712 M Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzy...展开 Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine 2712M curing agent allows the use in emission compliant coating and flooring systems. 收起
Request Sample Ancamine® 2726 Curative Video Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2726 is a modified cycloaliphatic amine that offers good color and color stability. It provides high-gloss, non-blushing films with good chemical resistance. This product is used in solvent-free and high-solids coatings, gel coats, and self-leve...展开 Ancamine® 2726 is a modified cycloaliphatic amine that offers good color and color stability. It provides high-gloss, non-blushing films with good chemical resistance. This product is used in solvent-free and high-solids coatings, gel coats, and self-leveling flooring. 收起
Request Sample Ancamine® 2735 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2735 is a modified cycloaliphatic polyamine. This low viscosity, low color curing agent is intended for ambient cure of liquid epoxy resin, but can cure resin systems down to 5 °C. Ancamine® 2735 advantages include, outstanding yellowing resist...展开 Ancamine® 2735 is a modified cycloaliphatic polyamine. This low viscosity, low color curing agent is intended for ambient cure of liquid epoxy resin, but can cure resin systems down to 5 °C. Ancamine® 2735 advantages include, outstanding yellowing resistance, low color, fast cure speed and hardness build at ambient and low temperature, low viscosity, very good chemical and mechanical resistance and good carbamation resistance Ancamine® 2735 applications may include industrial and decorative self leveling flooring, high solids and solvent free coatings. 收起
Request Sample Ancamine® 2739 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low vol...展开 Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low volatile organic component coating and flooring formulations and allows the use in emission compliant systems. Compared to Ancamine® 2712 curing agent, Ancamine® 2739 curing agent offers long pot-life whilst retaining cure speed and through cure and providing enhanced UV durability. 收起
Request Sample Ancamine® 2748 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings. This curative is intended for use in coatings that require resistance to acids, bases and solvents...展开 Ancamine® 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings. This curative is intended for use in coatings that require resistance to acids, bases and solvents in markets including waste water, secondary containment, flooring, tank coatings and other demanding applications. 收起
Request Sample Ancamine® 2749 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2749 is a cycloaliphatic amine adduct curing agent designed for use with liquid epoxy resins. It is supplied as an amber liquid and has a viscosity of 275cPs at 25 °C.
Request Sample Ancamine® 2759 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotti...展开 Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotting. Ancamine® 2759 curing agent can be used to formulate solvent-free topcoats or self leveling and screed floorings where high chemical resistance is required. The product is free of nonyl phenol. 收起
Request Sample Ancamine® 2765 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in sol...展开 Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in solvent-free coatings, laminates, adhesives, and as an accelerator for other curing agents. 收起
Request Sample Ancamine® 2800 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulatio...展开 Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulations. 收起
Request Sample Ancamine® 2908A Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low v...展开 Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low viscosity. This can enhance fabricator processing with improved fiber wetting, minimised material waste and improved overall throughput. It is recommended for use in composites’ processing, industrial electrical, and electronics applications. 收起
Request Sample Ancamine™ 2264 Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffnes...展开 Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffness and elevated temperature performance in cured systems, compared with cycloaliphatic diamine-cured systems. Applications for this product include filament winding, resin transfer molding, potting for tooling, electrical and general industrial applications. 收起
Request Sample Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...展开 Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. 收起
Request Sample Anquamine® 287 Waterborne Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based pr...展开 Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer for old and new concrete. 收起
Request Sample Anquamine® 401 Evonik Resource Efficiency GmbH, BL Crosslinkers 水性固化剂,具有快速干燥时间,以及出色的硬度和良好的防腐蚀性能。可为高光泽涂膜提供出色的保光性
Request Sample Anquamine® 419 Evonik Resource Efficiency GmbH, BL Crosslinkers 水性固化剂,具有快干时间和出色的耐腐蚀和耐湿性,良好的光泽和保光性,以及对钢基材出色的附着力
Request Sample Anquamine® 721 Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC....展开 Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC. It offers good pot life, good dry speed, and good emulsion stability even at low solids. Cured coatings exhibit high gloss, a balance of hardness and flexibility, and very good adhesion to concrete. 收起
Request Sample Anquamine® 731 Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. ...展开 Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. Anquamine® 731 curing agent easily emulsifies standard liquid epoxy resins without the need for emulsifiable or pre-emulsified epoxy resins. 收起
Request Sample Anquamine® 735 Evonik Resource Efficiency GmbH, BL Crosslinkers Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Fo...展开 Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Formulations based on Anquamine® 735 curing agent provide highly decorative functional floors without the requirement for plasticisers or solvents. 收起
Request Sample Anquawhite™ 100 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Anquawhite™ 100 Curing Agent is a novel waterborne curing agent dispersion designed for use in ambient or heat cure two part epoxy systems. This product can be formulated with a variety of epoxy resins and waterborne epoxy dispersions while maintaining VO...展开 Anquawhite™ 100 Curing Agent is a novel waterborne curing agent dispersion designed for use in ambient or heat cure two part epoxy systems. This product can be formulated with a variety of epoxy resins and waterborne epoxy dispersions while maintaining VOC levels < 100 g/l. It can also be formulated to high solids while maintaining low viscosity. Formulations based on Anquawhite™ 100 curing agent and Ancarez™ AR 550 epoxy resin offer long pot life, fast dry, high gloss, and high water resistance at low VOC. Anquawhite™ 100 curing agent formulations also offer low yellowing, good acid and food stain resistance, and good water resistance. 收起
Request Sample EPODIL® 742 Evonik Resource Efficiency GmbH, BL Crosslinkers An epoxy resin system modifier.
Request Sample EPODIL® 747 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain term...展开 EPODIL® 747 Reactive Diluent is an aliphatic glycidyl ether comparable to Epoxide 7.1 It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. It is ideal for use in flooring, mortars, and grouts, high and 100%-solids coatings, laminates, and potting compounds. 收起
Request Sample EPODIL® 757 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting...展开 EPODIL® 757 Reactive Diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol. The product is a cycloaliphatic difunctional reactive diluent used to reduce the viscosity of epoxy resin systems. It is ideal for use in laminates, potting compounds, mortars, grouts and flooring. 收起
Request Sample EPODIL® 759 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展开 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起
Request Sample Epilink™ 360 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC...展开 Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC epoxy coatings with handling and performance properties typical of solventborne formulations. 收起
Request Sample Epodil® 748 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers Epodil® 748 Reactive Diluent is the glycidyl ether of a mixture of C12-C14 aliphatic alcohols used to reduce the viscosity of epoxy resin systems. It is a monofunctional reactive diluent, which provides excellent viscosity reduction. In addition the low l...展开 Epodil® 748 Reactive Diluent is the glycidyl ether of a mixture of C12-C14 aliphatic alcohols used to reduce the viscosity of epoxy resin systems. It is a monofunctional reactive diluent, which provides excellent viscosity reduction. In addition the low level of volatility and ability to reduce the surface tension of epoxy resins make this product a general purpose diluent. 收起
Request Sample Epodil® 749 Reactive Diluent Evonik Resource Efficiency GmbH, BL Crosslinkers Epodill® 749 Reactive Diluent is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems. It is a difunctional reactive diluent, which provides good viscosity reduction with minimal reduction in physical properties. This prod...展开 Epodill® 749 Reactive Diluent is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems. It is a difunctional reactive diluent, which provides good viscosity reduction with minimal reduction in physical properties. This product is applied in laminates, flooring and motars, and potting and encapsulation. 收起
HELLUTEL™ HEC HR 1000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardan...展开 HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC HR 2000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC HR 3000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC HR 4000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC MR 2000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC MR 300 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant,...展开 HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
HELLUTEL™ HEC MR 5000 Shandong Yiteng Chemical Limited Liability Company HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起
Request Sample HYBRIDUR® 580 Polymer Dispersion Evonik Resource Efficiency GmbH, BL Crosslinkers HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展开 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起
Request Sample Hybridur® 570 Polymer Dispersion Evonik Resource Efficiency GmbH, BL Crosslinkers 丙烯酸-氨基甲酸酯混合聚合物乳液。是常规聚氨酯乳液经济有效的替代物。具有杰出的对各种基材的附着力、柔韧性和出众的耐腐蚀性能和阻隔性能
Request Sample Hybridur® 870 Polymer Dispersion Evonik Resource Efficiency GmbH, BL Crosslinkers 不含NMP,阴离子稳定的丙烯酸-氨基甲酸酯混合聚合物乳液。它应用于自干、烤漆或交联高性能涂料中具有出色的润湿性、附着力、阻隔性和涂膜性能
Hydroxypropyl Starch Ether Shandong Yiteng Chemical Limited Liability Company Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including ad...展开 Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including adhesives, coating or organic liquids for building materials. 收起
Request Sample IMICURE® AMI-1 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展开 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起
Request Sample IMICURE® Imidazole Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展开 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起
Request Sample Imicure® EMI-24 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Imicure® EMI-24 Curing Agent is 2-ethyl-4-methyl Imidazole, a high-reactivity, medium-viscosity liquid imidazole designed for use as a latent curing agent/curing accelerator for epoxy resins. It is used alone or to accelerate dicyandiamide or anhydride cu...展开 Imicure® EMI-24 Curing Agent is 2-ethyl-4-methyl Imidazole, a high-reactivity, medium-viscosity liquid imidazole designed for use as a latent curing agent/curing accelerator for epoxy resins. It is used alone or to accelerate dicyandiamide or anhydride cures. This product is applied in filament winding, electrical laminates, moulding powders, one-component adhesives, and structural adhesives. 收起
K-CURE® 1040 King Industries, Inc. K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatin...展开 K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatings, appliance finishes, and printing inks. 收起
K-CURE® 1040W King Industries, Inc. K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water sys...展开 K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water systems. It is soluble in water, alcohol, and also glycols. This product can be applied to water based wood coatings, paper coatings, and printing inks. 收起
K-CURE® 129B King Industries, Inc. K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal sub...展开 K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal substrates because of its corrosive nature. This product offer fast curing, and high acid value which allows lower does levels. This is a product that is soluble in water, alcohol, and glycols. It can be applied to wood, paper, and plastic coatings. 收起
K-FLEX® 148 King Industries, Inc. K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosit...展开 K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primers, coil coatings, overprint varnishes, and general industrials. 收起
K-FLEX® 171-90 King Industries, Inc. K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers lon...展开 K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers long pot life, enhanced adhesion and flexibility. Because of its lower hydroxyl number, K-FLEX® 171-90 requires less crosslinker. K-FLEX® 171-90 can also be used as a modifier of aminoplast crosslinked coatings, inks and adhesives to enhance flexibility and adhesion. It appears as a clear, light straw liquid and offers high resistivity and low temperature cure. This product is soluble in esters, ketones, alcohols, aromatic 100 and aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be used in office furniture coatings, 2K urethane coatings, appliance coatings, elastomeric coatings, coil coatings, and epoxy flexibilizer. 收起
K-FLEX® 188 King Industries, Inc. K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure p...展开 K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure produce exceptional and consistent performance and broad compatibility. K-FLEX® 188's primary hydroxyl groups also produce reactivity with epoxies in cationic thermal cure systems. This product is 100% active and offers, good flexibility, adhesion to plastics, and high resistivity. It appears as a clear, light straw liquid and is soluble in the aerospace, automotive refinish, and marine maintenance industries along with plastic substrates, overprint varnishes, glass laminates, and optical coatings. 收起
K-FLEX® 7301 King Industries, Inc. K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It i...展开 K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. 收起
K-FLEX® A307 King Industries, Inc. K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimize...展开 K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimizes the crosslinker demand. It offers improved flexibility, light color, abrasion resistance, good balance of surface dry and pot life in 2K PU, and no acid functionality. It appears as a clear viscous liquid and is soluble in esters, alcohols, xylene, ketones, aromatic 100, and aromatic 150. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, industrial maintenance, aerospace, and plastic coatings. 收起
K-FLEX® A308 King Industries, Inc. K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed togeth...展开 K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed together with higher hydroxyl number gives good adhesion and hardness with lower VOC levels. K-FLEX® A308 appears as a offers enhanced flexibility, light color, a balance of surface dry/pot life in 2K PU, no acid functionality, and abrasion resistance. It is soluble in esters, alcohols, Aromatic 100, Aromatic 150, ketones, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, plastic coatings, industrial maintenance, and aerospace. 收起
K-FLEX® UD-320 King Industries, Inc. K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent...展开 K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent. This product has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 enhances the hardness of melamine crosslinked systems. When used to modify a 2-component polyurethane, it will enhance hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems. It also offers benefits like low VOC, chemical resistance, exterior durability, QUV resistance, and hydrolytic stability. This product can be used for machine/equipment coatings, automotive coatings, appliance coatings, wood and paper coatings, and aerospace coatings. 收起
K-FLEX® UD-320-100 King Industries, Inc. K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the u...展开 K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the use of isocyanates. It appears as a viscous clear liquid and offers a low VOC, enhanced hardness, exterior durability, hydrolytic stability, QUV resistance, and is solvent and isocyanate free. This product is soluble in almost all organic solvents excluding aliphatic and aromatic hydrocarbons. The only was to get aromatic solubility is to combine it with a hydrogen bonding solvent. K-FLEX® UD-320-100 can be applied in industries like paper, automotive, wood, leather, and screen printing ink. 收起
K-FLEX® UD-350W King Industries, Inc. K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350...展开 K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to enhance crosslink density, solids, film/resistance properties, and flow/leveling. It appears as a straw colored liquid and offers low VOC, water solubility, hardness, chemical resistance, hydrolytic stability, QUV resistance, and exterior durability. This is a product that is not soluble in aromatic and aliphatic hydrocarbons. It can used in making, coil coatings, wood coatings, can coatings, dip coatings, appliance coatings, automotive coatings, and overprint varnishes. 收起
K-FLEX® XM-3307 King Industries, Inc. K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appear...展开 K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appears as a viscous liquid and offers fast dispersion time, high pigment loading, and high pigment transparency. It is soluble in ketones, alcohols, esters, aromatic hydrocarbons, and is not soluble in aliphatic hydrocarbons. It can be soluble in water if it is neutralized with an organic amine. K-FLEX® XM-3307 can also be applied in water-based coatings, solvent-based coatings, and can be used as an intercoat adhesion promoter. 收起
K-FLEX® XM-332 King Industries, Inc. K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...展开 K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. 收起
K-FLEX® XM-337 King Industries, Inc. K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...展开 K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. 收起
K-FLEX® XM-359 King Industries, Inc. K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a goo...展开 K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a good balance of flexibility with hardness, good exterior durability plus great solubility in many different solvents including exempt solvents. It appears as a clear, light straw liquid and provides optical clarity and low color along with good compatibility. This product is soluble in esters, ketones, alcohols, aromatic 100, aromatic 150, xylene, t-butyl acetate, and Oxsol 100. It is partially soluble in mineral spirits, and insoluble in water. It is applied in plastic coatings, optically clear coatings, elastomers and laminates. 收起
K-FLEX® XM-360 King Industries, Inc. K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility ...展开 K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility with hardness, excellent exterior durability plus excellent solubility in many different solvents. This product offers good compatibility and solubility, optical clarity and low color, and it is 100% active. It appears as a light straw liquid and is soluble in ketones, aromatics, alcohols, glycols, glycol ethers, esters, and is insoluble in water. It can be applied in the aerospace industry, automotive refinishes, plastic coatings, marine maintenance, and optically clear coatings, elastomers, and laminates. 收起
K-FLEX® XM-366 King Industries, Inc. K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. I...展开 K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. It appears as a clear liquid that is light in color and offers good compatibility and solubility. This product is soluble in glycols, glycol ethers, alcohols, esters, aromatics, ketones, and is insoluble in aliphatic hydrocarbons and water. It can be applied in plastic coatings, aerospace, automotive OEM & refinishes, and VOC compliant systems. 收起
K-FLEX® XM-B301 King Industries, Inc. K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisoc...展开 K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates. This product appears as a clear amber liquid and offers reduced induction time, adhesion, corrosion resistance, viscosity reduction, and elimates solvent popping and pinholes. It is soluble in esters, alcohols, aromatics, and ketones. It is insoluble in aliphatic hydrocarbons and water. K-FLEX® XM-B301 can be applied in epoxy-polyamide primers for industries like aerospace, automotive, marine, truck/bus/rail, and industrial maintenance. 收起
K-KAT® 348 King Industries, Inc. K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a cl...展开 K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a clear, straw liquid and offers great catalysis of secondary hydroxyls, gloss retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is limited in solubility in alcohols and esters and is insoluble in water. K-KAT® 348 can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams and coatings, and cationic coatings. 收起
K-KAT® 4205 King Industries, Inc. K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack fr...展开 K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack free time along with good viscosity stability. It is effective at low metal concentrations and also effective with a mix of isocyanates and polycols. K-KAT® 4205 is soluble in ketones, aromatic hydrocarbons, and esters. It can be applied to automotive topcoats, maintenance coatings, structural plastics coatings, and aerospace coatings. 收起
K-KAT® 5218 King Industries, Inc. K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the ...展开 K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the addition of 2,4-pentanedione, fast tack free time, exterior durability, and is effective with a variety of isocyanates and polyols. It appears as a slightly hazy, amber liquid and can be applied in automotive topcoats, aerospace coatings, maintenance coatings, and coatings for structural plastics. This product is soluble in ketones, esters, glycol ethers, alcohols, and aromatic hydrocarbons. 收起
K-KAT® 6212 King Industries, Inc. K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability a...展开 K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability along with a short tack free time. This product doesn't add to the hydrolysis of polyester resins and high selectivity for NCO/OH reactions over NCO/water reaction. It is soluble in esters, alcohols, ketones, aliphatic and aromatic hydrocarbons, glycol ethers, and glycol ether acetates. It is only partially soluble in water. It can be applied to adhesives, polyurethane coatings, casting resins and polyurethane resin synthesis, RIM, and water-based two component coatings. 收起
K-KAT® 670 King Industries, Inc. K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be...展开 K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be applied in ambient cured 1 component organosilane and 2 component organosilane hybrid coatings, caulks, adhesives, elastomers, and sealants. 收起
K-KAT® XC-B221 King Industries, Inc. K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawb...展开 K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawbacks. This product offers good glass retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. K-KAT® XC-B221 is soluble in butanol, ethanol, methanol, isopropanol, glycol ethers, glycol ether acetates, aliphatic and aromatic hydrocarbons, and is insoluble in water. This product appears as a clear, straw liquid and can be applied in 2K, blocked isocyanate coatings, urethane elastomers, foams, coatings, and cationic electro-coatings. 收起