| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...展开 Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...展开 Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoflon 1C | Accoat A/S | Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adh...展开 Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in mixers, dough vats, on conveyer belts and freeze-drying trays. 收起 | |
| Accoflon 2C | Accoat A/S | Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesi...展开 Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. 收起 | |
| Accoflon H | Accoat A/S | Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the...展开 Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and transport equipment and plastic moulding equipment due to its durability and non-stick properties. 收起 | |
| Accoflon P348 | Accoat A/S | Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. 收起 | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. 收起 | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...展开 Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...展开 Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...展开 Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. 收起 | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...展开 Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. 收起 | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...展开 Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 收起 | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...展开 Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 收起 | |
| FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) | Hainan Zhongxin Chemical Co., Ltd. | FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) is a white powder that contains 52% Br Content. It is primarily used as a flame retardant additive in paints and plastics. FR-52 is recommended for use in: PBT, PET, PBT/PET blen...展开 FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) is a white powder that contains 52% Br Content. It is primarily used as a flame retardant additive in paints and plastics. FR-52 is recommended for use in: PBT, PET, PBT/PET blends, PC, ABS, ABS/PC blends, Polysulfone and SAN. 收起 | |
| FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A | Hainan Zhongxin Chemical Co., Ltd. | FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A, synonymous with Carbonicdichloride, polymerwith4,4-(1-methylethylidene)bis2, 6-dibromophenol, bis(2,4,6-tribromophenyl) ester, is a white powder with a bromine content of approximately ...展开 FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A, synonymous with Carbonicdichloride, polymerwith4,4-(1-methylethylidene)bis2, 6-dibromophenol, bis(2,4,6-tribromophenyl) ester, is a white powder with a bromine content of approximately 58%. It is primarily used as a flame retardant in paints and plastics. This product is recommended for use in PBT, PET, PBT/PET blends, PC, ABS, ABS/PC blends, Polysulfone and SAN. 收起 | |
| Maleic Anhydride | Hainan Zhongxin Chemical Co., Ltd. | Maleic anhydride is an important organic chemical and raw material. It is primarily used to make unsaturated polyester resins and paints and paper products. It has additional uses as a treatment agent for artificial leather and marble. | |
| P-Phenylenediamine (PPD) | Hainan Zhongxin Chemical Co., Ltd. | P-Phenylenediamine (PPD) can be either a white powder, flake or lump with a molecular formula of C6H8N2 and is between 99.5 - 99.9% pure. It is primarily used as a component of engineering polymers and aramid fibers. P-Phenylenediamine (PPD) can also be u...展开 P-Phenylenediamine (PPD) can be either a white powder, flake or lump with a molecular formula of C6H8N2 and is between 99.5 - 99.9% pure. It is primarily used as a component of engineering polymers and aramid fibers. P-Phenylenediamine (PPD) can also be used in the production of hair dyes, rubber chemicals, textile dyes, pigments, and photographic developing chemicals. 收起 | |
| Pentaerythritol | Hainan Zhongxin Chemical Co., Ltd. | Pentaerythritol is synonymous with 2,2-Bis(hydroxymethyl) 1,3-propanediol;Tetrakis(hydroxymethyl)methane and contains 95% Monopentaerythritol. It is primarily used as an additive for short, medium and long oil alkyd resins for the production of inks and p...展开 Pentaerythritol is synonymous with 2,2-Bis(hydroxymethyl) 1,3-propanediol;Tetrakis(hydroxymethyl)methane and contains 95% Monopentaerythritol. It is primarily used as an additive for short, medium and long oil alkyd resins for the production of inks and paints. 收起 | |
| Petroleum Resin (C9 series) | Hainan Zhongxin Chemical Co., Ltd. | Petroleum Resin (C9 series) is a light yellow granular petroleum hydrocarbon resin for use in making road-marking paints. It also has applications as an additive in the production of rubber and printing inks for similar industries. | |
| Vinyl Acetate Monomer | Hainan Zhongxin Chemical Co., Ltd. | Vinyl Acetate Monomer, synonymous with 1-Acetoxyethylene (C4H6O2), is a clear liquid that is 99.5% pure. It is a copolymer used in the production of paints and coatings for dispersion purposes. |
