| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...展开 Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...展开 Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoflon 1C | Accoat A/S | Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adh...展开 Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in mixers, dough vats, on conveyer belts and freeze-drying trays. 收起 | |
| Accoflon 2C | Accoat A/S | Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesi...展开 Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. 收起 | |
| Accoflon H | Accoat A/S | Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the...展开 Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and transport equipment and plastic moulding equipment due to its durability and non-stick properties. 收起 | |
| Accoflon P348 | Accoat A/S | Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. 收起 | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. 收起 | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...展开 Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...展开 Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...展开 Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. 收起 | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...展开 Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. 收起 | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| Accowear | Accoat A/S | Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant prop...展开 Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant properties. 收起 | |
| Alpha-Rez™ 3500 E | Lawter | Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigmen...展开 Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigment wetting properties causing inks to display a higher gloss. It is used in offset, grinding varnishes and letterpress applications. 收起 | |
| Alpha-Rez™ 9250 E | Lawter | Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using ...展开 Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using fast-running printing processes. 收起 | |
| Burez® K79 | Lawter | Burez® K79 is a potassium soap of modified rosin with 80% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier for water-based adhesives. | |
| Burez® NA18 502D | Lawter | Burez® NA18 502D is a sodium soap of stabilized rosin with 18% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system as well as in adhesives, particularly bottle labeling, in ad...展开 Burez® NA18 502D is a sodium soap of stabilized rosin with 18% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system as well as in adhesives, particularly bottle labeling, in addition to uses in pigment resination. 收起 | |
| Burez® NA40 502D | Lawter | Burez® NA40 502D is a sodium soap of stabilized rosin with 40% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system with added applications in pigment resination and adhesives. | |
| Burez® NK25 502D | Lawter | Burez® NK25 502D is a potassium soap of stabilized rosin with 25% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system with applications also in adhesives and pigment resinatio...展开 Burez® NK25 502D is a potassium soap of stabilized rosin with 25% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system with applications also in adhesives and pigment resination. 收起 | |
| Burez® NK40 502D | Lawter | Burez® NK40 502D is a sodium and potassium soap of stabilized rosin with 40% solids, good stability and a low level of unsaponifiables. It is mostly used as an emulsifier in the emulsion polymerization system, in pigment resination and in additives. | |
| Cinergi™ 1060 | Lawter | Cinergi™ 1060 is a sheet-fed free-flow varnish that is tack stable and retains body in an ink at high shear temperatures. Its lithographic characteristics ensure the varnish produces a high print performance in long and short press runs. It has high gloss...展开 Cinergi™ 1060 is a sheet-fed free-flow varnish that is tack stable and retains body in an ink at high shear temperatures. Its lithographic characteristics ensure the varnish produces a high print performance in long and short press runs. It has high gloss, good water balance with fast setting and low misting properties as added benefits. Cinergi™ 1060 is used in sheet-fed inks and wetting varnishes. 收起 | |
| Cinergi™ 1061 | Lawter | Cinergi™ 1061 is a sheet-fed fast setting gel varnish with high solids and medium quickset features that give it greater synergy and compatibility with a broad range of color systems. Inks that use the gel varnish show higher gloss and better color develo...展开 Cinergi™ 1061 is a sheet-fed fast setting gel varnish with high solids and medium quickset features that give it greater synergy and compatibility with a broad range of color systems. Inks that use the gel varnish show higher gloss and better color development and water balance. Cinergi™ 1061 is used in sheet-fed inks. 收起 | |
| Cinergi™ 2000 E | Lawter | Cinergi™ 2000 E is a special varnish that is 100% non-volatile and is based on modified vegetable oil blends. The product displays high gloss, low bronzing and good film formation in special inks such as sheet-fed, metal deco and web-fed applications. | |
| Cinergi™ 2091 A | Lawter | Cinergi™ 2091 A is a grinding and flushing vehicle that has been created to wet-out high pigment loads and to achieve maximum color development. It has good pigment wetting properties and shows press stability, high gloss, good transfer and leveling as we...展开 Cinergi™ 2091 A is a grinding and flushing vehicle that has been created to wet-out high pigment loads and to achieve maximum color development. It has good pigment wetting properties and shows press stability, high gloss, good transfer and leveling as well as fast set speeds. Cinergi™ 2091 A is used in sheet-fed and letterpress inks. 收起 | |
| Cinergi™ 8710 C | Lawter | Cinergi™ 8710 C is a sheet-fed gel varnish that is 78% non-volatile and is from phenolic modified rosin-based resins, vegetable oils, mineral distillates and gelling agents. It is fast setting and has good flow and high gloss features. Cinergi™ 8710 C als...展开 Cinergi™ 8710 C is a sheet-fed gel varnish that is 78% non-volatile and is from phenolic modified rosin-based resins, vegetable oils, mineral distillates and gelling agents. It is fast setting and has good flow and high gloss features. Cinergi™ 8710 C also possesses good transfer, tack stability with good shear and heat resistance. The varnish shows good water balance with a high resistance to water. It is used as a let down varnish or gel in quickset offset inks or sheet-fed inks. 收起 | |
| Cinergi™ 8735 C | Lawter | Cinergi™ 8735 C is a completely non-volatile let down varnish based on gelling agents, ester solvents, vegetable oil and phenolic-modified rosin-based resins. It displays good color strength along with gloss and fast setspeeds. The gel varnish also shows ...展开 Cinergi™ 8735 C is a completely non-volatile let down varnish based on gelling agents, ester solvents, vegetable oil and phenolic-modified rosin-based resins. It displays good color strength along with gloss and fast setspeeds. The gel varnish also shows good tack stability and a high resistance to water. Cinergi™ 8735 C is used as a let down varnish in quickset offset and sheet-fed offset inks and a variety of other offset inks. 收起 | |
| Cinergi™ 8760 C | Lawter | Cinergi™ 8760 C is a soya bean oil sheet-fed gel varnish with an 83% non-volatile composition and is based on soya bean oil, gelling agents, mineral distillates and phenolic-modified rosin-based resins. With 27% soya bean oil composition, the varnish show...展开 Cinergi™ 8760 C is a soya bean oil sheet-fed gel varnish with an 83% non-volatile composition and is based on soya bean oil, gelling agents, mineral distillates and phenolic-modified rosin-based resins. With 27% soya bean oil composition, the varnish shows good color strength and flow, combined with gloss and a fast setspeed. It also has good tack stability and a high resistance to water. Cinergi™ 8760 C is used as a let down varnish or gel in quickset offset and sheet-fed offset inks. 收起 | |
| Decotherm™ 100C | Lawter | Decotherm™ 100C is a metal decorating varnish created for inks that are used on drawn aluminum cans that are printed on a spindle press. It is used in standard steel and tin plate lithographic inks because of its faster cure rate. Apart from drawn aluminu...展开 Decotherm™ 100C is a metal decorating varnish created for inks that are used on drawn aluminum cans that are printed on a spindle press. It is used in standard steel and tin plate lithographic inks because of its faster cure rate. Apart from drawn aluminum cans and steel and tin plate lithographic inks, Decotherm™ 100C is also used on color cans, but not on white cans. 收起 | |
| Decotherm™ 1720C | Lawter | Decotherm™ 1720C is a metal decorating varnish that has been created for inks applied on drawn aluminum cans which are printed on a spindle press. It is used in standard steel and tin plate lithographic inks as a result of its faster cure rate. Decotherm™...展开 Decotherm™ 1720C is a metal decorating varnish that has been created for inks applied on drawn aluminum cans which are printed on a spindle press. It is used in standard steel and tin plate lithographic inks as a result of its faster cure rate. Decotherm™ 1720C has good pigment wetting and scratch resistance properties and apart from drawn aluminum cans and steel and tin plate lithographic inks, is also suitable for use in color cans and not white cans. 收起 | |
| Decotherm™ 210 E | Lawter | Decotherm™ 210 E is a 65% hydroxyl functional polyester resin that has high gloss, good printability and adhesion and good pigment wetting properties. Decotherm™ 210 E is meant for metal deco 2-piece cans, colored and white inks and spindle printing appli...展开 Decotherm™ 210 E is a 65% hydroxyl functional polyester resin that has high gloss, good printability and adhesion and good pigment wetting properties. Decotherm™ 210 E is meant for metal deco 2-piece cans, colored and white inks and spindle printing applications. 收起 | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...展开 Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. 收起 | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...展开 Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. 收起 | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| Eco-Rez™ 350 C | Lawter | Eco-Rez™ 350 C is a high viscosity rosin ester with a high viscosity and showing good tolerance for low KB oils. It is primarily an offset ink, but has the potential to be used in other applications like pigment dispersions, coatings and adhesives, sealan...展开 Eco-Rez™ 350 C is a high viscosity rosin ester with a high viscosity and showing good tolerance for low KB oils. It is primarily an offset ink, but has the potential to be used in other applications like pigment dispersions, coatings and adhesives, sealants and heat resistant inks. 收起 | |
| Eco-Rez™ 4237 C | Lawter | Eco-Rez™ 4237 C is a rosin-modified resin that is formaldehyde and phenol-free, showing low or medium solubility together with a high viscosity in mineral distillates. Compared to other phenolic rosin resins, it gives better gel response, lower tack and a...展开 Eco-Rez™ 4237 C is a rosin-modified resin that is formaldehyde and phenol-free, showing low or medium solubility together with a high viscosity in mineral distillates. Compared to other phenolic rosin resins, it gives better gel response, lower tack and a wider water window. Other advantages include good run resistance, low yellowing and odor and a high structure. Eco-Rez™ 4237 C is used in offset, web offset, heatset and coldset applications as well as in sheet-fed and gloss offsets and low odor inks. Lower color makes it ideal for use in overprint varnishes. 收起 | |
| Eco-Rez™ 9710 A | Lawter | Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images ...展开 Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images during long and high-speed press runs. Eco-Rez™ 9710 A is ideally suited to be used in sheet-fed, heatset and coldset applications. 收起 | |
| Eco-Rez™ 9730 A | Lawter | Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the...展开 Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the product provides a more sustainable chemistry option with improved levels of performance. Eco-Rez™ 9730 A is used in all offset inks including coldset, heatset and sheet-fed applications. 收起 | |
| Eco-Rez™ 9760 A | Lawter | Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print ...展开 Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print images and better rheological stability and water balance stability during long and high-speed press runs. Eco-Rez™ 9760 A is suitable for all offset inks including coldset, heatset and sheet-fed applications. 收起 | |
| Filtrez™ 521 A | Lawter | Filtrez™ 521 A is a fumaric modified rosin ester, soluble in alcohol with a high acid value and softening point. The product's broad compatibility and solubility allow it to be an important consideration in flexographic printing inks. | |
| Filtrez™ 526 A | Lawter | Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. F...展开 Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. Filtrez™ 526 A is suitable for use in gravure and flexographic inks and coatings. 收起 | |
| Flex-Rez™ 0080 CS | Lawter | Flex-Rez™ 0080 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation. It provides good adhesion on films like treated polyethylene and polypropylene, cellophane, aluminum and other foil-coated substra...展开 Flex-Rez™ 0080 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation. It provides good adhesion on films like treated polyethylene and polypropylene, cellophane, aluminum and other foil-coated substrates. The resin is used in gravure and flexographic inks, in overprint varnishes as well as cold seal release lacquers. 收起 | |
| Flex-Rez™ 0100 CS | Lawter | Flex-Rez™ 0100 CS is a co-solvent soluble polyamide resin that has good chemical resistance, flexibility and film formation and offers good adhesion on various films like polypropylene and polyethylene. It is compatible with phenolic and maleic resins and...展开 Flex-Rez™ 0100 CS is a co-solvent soluble polyamide resin that has good chemical resistance, flexibility and film formation and offers good adhesion on various films like polypropylene and polyethylene. It is compatible with phenolic and maleic resins and displays low viscosity for increased solids. Flex-Rez™ 0100 CS is suitable for use in flexographic and gravure inks, in overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 0120 CS | Lawter | Flex-Rez™ 0120 CS is a co-solvent soluble polyamide resin that has good flexibility, film formation and chemical resistance as well as providing good adhesion on films like polypropylene, polyethylene, nylon and foil-coated substrates. It is compatible wi...展开 Flex-Rez™ 0120 CS is a co-solvent soluble polyamide resin that has good flexibility, film formation and chemical resistance as well as providing good adhesion on films like polypropylene, polyethylene, nylon and foil-coated substrates. It is compatible with phenolic and maleic resins and displays good formulating flexibility. Flex-Rez™ 0120 CS is suitable for use in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1060 CS | Lawter | Flex-Rez™ 1060 CS is a co-solvent soluble polyamide resin that displays good adhesion on various films, provides good film formation as well as showing flexibility and chemical resistance. It is compatible with phenolic and maleic resins and has applicati...展开 Flex-Rez™ 1060 CS is a co-solvent soluble polyamide resin that displays good adhesion on various films, provides good film formation as well as showing flexibility and chemical resistance. It is compatible with phenolic and maleic resins and has applications in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1066 CS | Lawter | Flex-Rez™ 1066 CS is a co-solvent soluble polyamide resin that displays good film formation, flexibility and chemical resistance with adhesion on various films like polyethylene, nylon, polypropylene and foil-coated substrates. It is compatible with pheno...展开 Flex-Rez™ 1066 CS is a co-solvent soluble polyamide resin that displays good film formation, flexibility and chemical resistance with adhesion on various films like polyethylene, nylon, polypropylene and foil-coated substrates. It is compatible with phenolic and maleic resins, rosins and rosin derivatives and is considered suitable for use in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1074 CS | Lawter | Flex-Rez™ 1074 CS is a co-solvent soluble polyamide resin that shows good chemical resistance, flexibility and film formation. It also displays good adhesion on films like treated polyethylene, cellophane, nylon, glassine, polypropylene and other foil coa...展开 Flex-Rez™ 1074 CS is a co-solvent soluble polyamide resin that shows good chemical resistance, flexibility and film formation. It also displays good adhesion on films like treated polyethylene, cellophane, nylon, glassine, polypropylene and other foil coated substrates. Flex-Rez™ 1074 CS shows compatibility with phenolic and maleic resins, rosin derivatives and rosins. It has good formulating flexibility and a low viscosity. The product is ideally suited for use in flexographic and gravure inks, in cold seal release lacquers and in overprint varnishes. 收起 | |
| Flex-Rez™ 1084 AS | Lawter | Flex-Rez™ 1084 AS is an alcohol soluble polyamide resin with a high melt point that should be considered in applications requiring high heat resistance. The resin won't gel at low temperatures, but when added to polyamide inks, it will give off partial ge...展开 Flex-Rez™ 1084 AS is an alcohol soluble polyamide resin with a high melt point that should be considered in applications requiring high heat resistance. The resin won't gel at low temperatures, but when added to polyamide inks, it will give off partial gel resistance. Flex-Rez™ 1084 AS provides film hardness making it suitable as a modifier for improving rub, scratch and grease resistance. The resin presents ideal opportunities for the creation of unique, high-performance inks, applicable in various synthetic polymer substrates. Flex-Rez™ 1084 AS is used in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 1094 CS | Lawter | Flex-Rez™ 1094 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation, along with good gel, water, alkali, lard and grease resistance properties. It provides good adhesion on films like treated polyeth...展开 Flex-Rez™ 1094 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation, along with good gel, water, alkali, lard and grease resistance properties. It provides good adhesion on films like treated polyethylene, aluminum, nylon, polypropylene and other foil coated substrates. Flex-Rez™ 1094 CS is compatible with phenolic and maleic resins, rosin derivatives and rosins. It is commonly used in flexographic and gravure inks, in cold seal release lacquers and in overprint varnishes. 收起 | |
| Flex-Rez™ 1104 LCS | Lawter | Flex-Rez™ 1104 LCS is a co-solvent soluble polyamide resin that shows good flexibility, chemical resistance and film formation. It displays good adhesion on films like nylon, polyethylene, glassine, polypropylene and foil-coated substrates. Flex-Rez™ 1104...展开 Flex-Rez™ 1104 LCS is a co-solvent soluble polyamide resin that shows good flexibility, chemical resistance and film formation. It displays good adhesion on films like nylon, polyethylene, glassine, polypropylene and foil-coated substrates. Flex-Rez™ 1104 LCS is compatible with phenolic and maleic resins, rosin derivatives and rosins. It shows lower viscosity for increased solids and good formulating flexibility. It is considered suitable for use in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1155 AS | Lawter | Flex-Rez™ 1155 AS is an alcohol soluble polyamide resin combining alcohol solubility with nitrocellulose compatibility to create flexographic inks that have good runability and gloss. It shows tolerance for ester solvents and its high solubility and degre...展开 Flex-Rez™ 1155 AS is an alcohol soluble polyamide resin combining alcohol solubility with nitrocellulose compatibility to create flexographic inks that have good runability and gloss. It shows tolerance for ester solvents and its high solubility and degree of compatibility allows it to be ideal for pigment wetting applications. Flex-Rez™ 1155 AS has good gel resistance as well as water, alkali, lard, oil and grease resistance properties. Further, it displays high gloss, adhesion and film forming capabilities. Flex-Rez™ 1155 AS is suitable for use in gravure and flexographic inks, in overprint varnishes and coatings and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 2433 AD | Lawter | Flex-Rez™ 2433 AD is an alcohol dilutable polyamide resin that has good wet pack resistance along with adhesion to substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion, high gloss, low odor and makes for ideal ...展开 Flex-Rez™ 2433 AD is an alcohol dilutable polyamide resin that has good wet pack resistance along with adhesion to substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion, high gloss, low odor and makes for ideal use in gravure and flexographic inks and in coatings and overprint varnishes. 收起 | |
| Flex-Rez™ 2445 AD | Lawter | Flex-Rez™ 2445 AD is an alcohol dilutable polyamide resin that has good wet-pack resistance together with suitable adhesion on substrates like polypropylene, polyethylene and coated foils. Among the benefits of the resin include good gel and heat resistan...展开 Flex-Rez™ 2445 AD is an alcohol dilutable polyamide resin that has good wet-pack resistance together with suitable adhesion on substrates like polypropylene, polyethylene and coated foils. Among the benefits of the resin include good gel and heat resistance properties, high gloss and pigment wetting features and film forming capabilities. Flex-Rez™ 2445 AD is suitable for use in gravure and flexographic inks, coatings and overprint varnishes and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 3370 CS | Lawter | Flex-Rez™ 3370 CS is a co-solvent polyamide resin that helps to improve gel resistance and is considered suitable for use in flexo and gravure inks as well as in lacquers for polyolefin films. | |
| Flex-Rez™ 4399 AD | Lawter | Flex-Rez™ 4399 AD is an alcohol dilutable polyamide resin that shows good wet-pack resistance as well as good adhesion on substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion properties, high gloss, low odor an...展开 Flex-Rez™ 4399 AD is an alcohol dilutable polyamide resin that shows good wet-pack resistance as well as good adhesion on substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion properties, high gloss, low odor and film forming benefits. Flex-Rez™ 4399 AD is ideal for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 4512 AS | Lawter | Flex-Rez™ 4512 AS is an alcohol soluble polyamide resin that combines good alcohol solubility with nitrocellulose compatibility to form flexographic inks with outstanding gloss and runability. It shows ideal tolerance for ester solvents and its high solub...展开 Flex-Rez™ 4512 AS is an alcohol soluble polyamide resin that combines good alcohol solubility with nitrocellulose compatibility to form flexographic inks with outstanding gloss and runability. It shows ideal tolerance for ester solvents and its high solubility and high degree of compatibility make it suitable for pigment wetting applications. Flex-Rez™ 4512 AS also has good gel, water and deep freeze resistance as well as high gloss and low viscosity characteristics. The resin is suitable for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 4584 AD | Lawter | Flex-Rez™ 4584 AD is an alcohol dilutable polyamide resin that displays good wet-pack resistance, good adhesion on substrates and coated foils as well as expert pigment dispersion properties. It also shows high gloss and good gel resistance making it suit...展开 Flex-Rez™ 4584 AD is an alcohol dilutable polyamide resin that displays good wet-pack resistance, good adhesion on substrates and coated foils as well as expert pigment dispersion properties. It also shows high gloss and good gel resistance making it suitable for use in gravure and flexographic inks, in overprint varnishes and coatings and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 5111 AD | Lawter | Flex-Rez™ 5111 AD is an alcohol dilutable polyamide resin with good wet-pack resistance, good adhesion on substrates and coated foils as well as good pigment dispersion characteristics. It also shows block and gel resistance as well as high gloss that con...展开 Flex-Rez™ 5111 AD is an alcohol dilutable polyamide resin with good wet-pack resistance, good adhesion on substrates and coated foils as well as good pigment dispersion characteristics. It also shows block and gel resistance as well as high gloss that contribute to making Flex-Rez™ 5111 AD suitable for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 6243AS | Lawter | Flex-Rez™ 6243AS is an alcohol soluble polyamide resin with a high melt point in a resin that can be used in overprints and inks that need high heat resistance. It has high gloss, is soluble in alcohol and displays flexibility, color and adhesion like oth...展开 Flex-Rez™ 6243AS is an alcohol soluble polyamide resin with a high melt point in a resin that can be used in overprints and inks that need high heat resistance. It has high gloss, is soluble in alcohol and displays flexibility, color and adhesion like other commercial polyamide resins. Flex-Rez™ 6243AS dries to a hard film composition creating water resistant, acid, alkali and grease resistant properties as well as block, ice-crinkle and rub characteristics. It does not gel at low temperatures, but can boost gel resistance of standard polyamide inks. Flex-Rez™ 6243AS is ideal for use in gravure and flexographic inks, overprint varnishes and coatings. 收起 | |
| Flexonic™ EN41 E | Lawter | Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The...展开 Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Flexonic™ W378 E | Lawter | Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueou...展开 Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Fluoron™ 735 A | Lawter | Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resi...展开 Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resistance properties. Fluoron™ 735 A is used in heatset offset inks, sheet-fed offset inks and in overprint varnishes. 收起 | |
| HELLUTEL™ HEC HR 1000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardan...展开 HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 3000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 |
