| AEPD® VOX 1000 | ANGUS Chemical Company 安格斯化学公司 | 一个新的多官能团添加剂，用于低气味，零VOC户内水性油漆。它具有非常温和的气味，高沸点和低蒸汽压。这些特点使之成为需要符合EU directive 2004/42/EC法规的油漆生产商一个理想的配方工具 | |
| ALKATERGE®-T | ANGUS Chemical Company 安格斯化学公司 | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展开 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起 | |
| AMP® | ANGUS Chemical Company 安格斯化学公司 | 这是一种无色，低粘度流体，大量用于金属加工流体，涂料，锅炉水体系和个人护理等领域。它可用作中和树脂的胺，协同分散剂，脱甲醛剂，腐蚀抑制剂以及作为合成的原料。 | |
| AMP-95® | ANGUS Chemical Company 安格斯化学公司 | 被普遍认为是一种用于所有类型的乳胶漆的多功能添加剂。 | |
| AVANTANE® PA 4000 | ANGUS Chemical Company 安格斯化学公司 | 一种专门设计用于满足溶剂型轮转凹印和柔印印刷性能要求的添加剂。 | |
| DMAMP-80® | ANGUS Chemical Company 安格斯化学公司 | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...展开 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. 收起 | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company 安格斯化学公司 | 一种经过改进的万能专业涂料助剂，是一种有效的溶液，能够满足涂料配方的要求，减少特殊助剂的用量。 | |
| Grilonit® Epoxide 8 | EMS-CHEMIE AG (PRIMID) | Grilonit® Epoxide 8 is a C12/C14-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing properties for civil engineering and ...展开 Grilonit® Epoxide 8 is a C12/C14-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. 收起 | |
| Grilonit® F 704 | EMS-CHEMIE AG (PRIMID) | Grilonit® F 704 is a polypropyleneglycol diglycidyl ether formulated as a flexibilizer that provides low toxicity and vapor pressure, reduced reactivity, and limited diluting power. This product is used in reducing system viscosity and enhancing propertie...展开 Grilonit® F 704 is a polypropyleneglycol diglycidyl ether formulated as a flexibilizer that provides low toxicity and vapor pressure, reduced reactivity, and limited diluting power. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. 收起 | |
| Grilonit® H 81016 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 81016 is a phenol free Mannichbase hardener formulated to provide fast and/or low temperature curing for wet and cold substrates. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 82044 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82044 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a low yellowing tendency and low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 82062 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82062 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a short pot life, and after full cure a low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
| Grilonit® H 84024 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, c...展开 Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, curing with liquid epoxy resins. 收起 | |
| Grilonit® H 84026 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing ag...展开 Grilonit® H 84026 is an isolated EDA adduct in xylene/butanol/propylene glycol methyl ether 50:35:15 curing agent type, medium viscous hardener formulated to provide good intercoat adhesion and good chemical resistance. This product is used as a curing agent with liquid epoxy resins. 收起 | |
| Grilonit® H 84043 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84043 is a modified cycloaliphatic polyamine adduct that has good flow properties, low carbamate tendency, and low yellowing tendency. This product is used as a slow amine for self-levelling mortars. | |
| Grilonit® P 6835 | EMS-CHEMIE AG (PRIMID) | Grilonit® P 6835 is a thermoplastic modified co-polyamide additive that has improved abrasion resistance, enhanced slip coverage, and improved edge coverage. This product is used to produce nylon modified polyester and hybrid powder coatings. | |
| Grilonit® RV 1806 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1806 is a 1,4-butane diglycidyl ether reactive diluent formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used in reducing system viscosit...展开 Grilonit® RV 1806 is a 1,4-butane diglycidyl ether reactive diluent formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. 收起 | |
| Grilonit® RV 1807.41 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1807.41 is a 2-ethylhexyl glycidyl ether formulated to provide good diluting effect and a higher vapor pressure. This product is used to reduce system viscosity and enhancing properties for civil engineering and construction applications. | |
| Grilonit® RV 1812 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1812 is a 1,6-hexane diglycidyl ether formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used to reduce system viscosity and enhancing pro...展开 Grilonit® RV 1812 is a 1,6-hexane diglycidyl ether formulated to provide good reactivity at low temperatures, good solvent resistance, high mechanical strength, and limited acid resistance. This product is used to reduce system viscosity and enhancing properties for civil engineering and construction applications. 收起 | |
| Grilonit® RV 1814 | EMS-CHEMIE AG (PRIMID) | Grilonit® RV 1814 is a C13/C15-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good wetting and air release behavior, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing ...展开 Grilonit® RV 1814 is a C13/C15-alkyl glycidyl ether formulated to provide low toxicity and vapor pressure, good wetting and air release behavior, good diluting power, and reduced reactivity. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. 收起 | |
| Grilonit® V-68-39 | EMS-CHEMIE AG (PRIMID) | Grilonit® V-68-39 is a high performance matting wax that is formulated to provide good gloss reduction, good flow, and enhanced mar and scratch resistance. This product used for matte finish powder coats. | |
| Grilonit® V51-31 | EMS-CHEMIE AG (PRIMID) | Grilonit® V51-31 is a trimethylolpropane triglycidyl ether formulated to provide good mechanical strength and reactivity, hot water and solvent resistance, and limited diluting power. This product is used in reducing system viscosity and enhancing propert...展开 Grilonit® V51-31 is a trimethylolpropane triglycidyl ether formulated to provide good mechanical strength and reactivity, hot water and solvent resistance, and limited diluting power. This product is used in reducing system viscosity and enhancing properties for civil engineering and construction applications. 收起 | |
| Griltex® 11A | EMS-CHEMIE AG (PRIMID) | Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a...展开 Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 1A | EMS-CHEMIE AG (PRIMID) | Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 2A | EMS-CHEMIE AG (PRIMID) | Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 2A S | EMS-CHEMIE AG (PRIMID) | Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination ...展开 Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 6E | EMS-CHEMIE AG (PRIMID) | Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 8E | EMS-CHEMIE AG (PRIMID) | Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 9E | EMS-CHEMIE AG (PRIMID) | Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is well used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 20 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 21 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 160-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 22 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 100 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle ...展开 Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 101 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 102 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various parti...展开 Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1260A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It h...展开 Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has good steam and dry cleaning resistance. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1299A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various pa...展开 Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1309E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1377E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 170-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1442E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 190-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1500A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 150-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1519E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1523A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1539E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 140-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1541A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1549A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 180-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1556A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1566A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1582E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1595E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1616E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1619E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1655E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1662A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1666A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 140-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1682E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1694A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1709A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1796A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1841E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1939E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 190-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2132E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 110-140°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2275E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2275E is a flame retardant copolyester-MB thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It has a FR additive and can be used to ble...展开 Griltex® D 2275E is a flame retardant copolyester-MB thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It has a FR additive and can be used to blend with other copolyesters to provide flame retardant properties. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2315E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2315E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 2315E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2338E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2338E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 2338E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2427E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2427E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 2427E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2490A | EMS-CHEMIE AG (PRIMID) | Griltex® D 2490A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 2490A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2500E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2500E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 2500E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| HELLUTEL™ HEC HR 1000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardan...展开 HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 3000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 4000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 300 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant,...展开 HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 5000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Hydroxypropyl Starch Ether | Shandong Yiteng Chemical Limited Liability Company | Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including ad...展开 Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including adhesives, coating or organic liquids for building materials. 收起 | |
| MELLUTEL™ YL 1500E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 1500E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YL 1500E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 1500E finds application in cement render and cement tile adhesives. 收起 | |
| MELLUTEL™ YL 800E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 800E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YL 800E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 800E finds application in tile grouts. 收起 | |
| MELLUTEL™ YL 8E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 8E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™...展开 MELLUTEL™ YL 8E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 8E finds application in gypsum plaster, gypsum join filler, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 10WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 10WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM 10WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 10WM finds application in gypsum plaster, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 10WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 10WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 10WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 10WMS finds application in dispersion tile adhesives, detergent, and waterborne paint. 收起 | |
| MELLUTEL™ YM 15WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 15WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM 15WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 15WM finds application in ETICS/EIFS, cement tile adhesive, and dispersion tile adhesive. 收起 | |
| MELLUTEL™ YM 15WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 15WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 15WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 15WMS finds application in ETICS/EIFS, cement tile adhesives, dispersion tile adhesives, detergent, and waterborne paint. 收起 | |
| MELLUTEL™ YM 20WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM20 WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM20 WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 20WM finds application in ETICS/EIFS and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 20WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 20WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 20WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 20WMS finds application in dispersion tile adhesives. 收起 | |
| MELLUTEL™ YT 40M | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YT 40M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL...展开 MELLUTEL™ YT 40M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YT 40M finds application in gypsum plaster, gypsum join filler, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YT 70M | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YT 70M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL...展开 MELLUTEL™ YT 70M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YT 70M finds application in gypsum plaster, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| NIKANE® MS 3000 | ANGUS Chemical Company 安格斯化学公司 | 一种性能独特的多功能溶剂，用于构成多种工业保养涂料体系中的溶剂型还原剂和冲淡剂。 | |
| NIKANE® MS 5000 | ANGUS Chemical Company 安格斯化学公司 | 一种多功能溶剂，在溶剂型体系中有独特的性能。不但能够轻易地溶解各种材料，而且能够赋予溶解液以特性，因此得到了广泛的应用。 | |
| Primid® QM-1260 | EMS-CHEMIE AG (PRIMID) | Primid® QM-1260 is an improved hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high color direct-fired powder coats. | |
| Primid® SF-4510 | EMS-CHEMIE AG (PRIMID) | Primid® SF-4510 is a hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high gloss powder coatings as well as applications were good outgassing properties are required. | |
| Primid® XL-552 | EMS-CHEMIE AG (PRIMID) | Primid® XL-552 is a beta-hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in exterior weather resistant powder coats. | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company 安格斯化学公司 | 快速反应、低黏度呃唑烷基湿气净化剂，用于聚氨酯涂料、密封剂和弹性体。 |
